Temporary deletion of files due to problems with the CVS repository

This commit is contained in:
adamdunkels 2006-06-18 08:07:30 +00:00
parent 5dd3e30a4f
commit 60075ec59e
11 changed files with 604 additions and 989 deletions

View File

@ -0,0 +1,99 @@
/*
* Copyright (c) 2006, Swedish Institute of Computer Science.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $Id: battery-sensor.c,v 1.3 2006/06/18 08:07:30 adamdunkels Exp $
*
* -----------------------------------------------------------------
*
* Author : Adam Dunkels, Joakim Eriksson, Niclas Finne
* Created : 2005-11-01
* Updated : $Date: 2006/06/18 08:07:30 $
* $Revision: 1.3 $
*/
#include "dev/battery-sensor.h"
#include <io.h>
#include "dev/irq.h"
const struct sensors_sensor battery_sensor;
static unsigned int battery_value;
/*---------------------------------------------------------------------------*/
static void
init(void)
{
battery_value = 0;
}
/*---------------------------------------------------------------------------*/
static int
irq(void)
{
battery_value = ADC12MEM6;
return 0;
}
/*---------------------------------------------------------------------------*/
static void
activate(void)
{
irq_adc12_activate(&battery_sensor, 6, (INCH_4 + SREF_0));
}
/*---------------------------------------------------------------------------*/
static void
deactivate(void)
{
irq_adc12_deactivate(&battery_sensor, 6);
battery_value = 0;
}
/*---------------------------------------------------------------------------*/
static int
active(void)
{
return irq_adc12_active(6);
}
/*---------------------------------------------------------------------------*/
static unsigned int
value(int type)
{
return battery_value;
}
/*---------------------------------------------------------------------------*/
static int
configure(int type, void *c)
{
return 0;
}
/*---------------------------------------------------------------------------*/
static void *
status(int type)
{
return NULL;
}
/*---------------------------------------------------------------------------*/
SENSORS_SENSOR(battery_sensor, BATTERY_SENSOR,
init, irq, activate, deactivate, active,
value, configure, status);

View File

@ -1,61 +1,48 @@
/*
* Copyright (c) 2005, Swedish Institute of Computer Science
* All rights reserved.
* Copyright (c) 2006, Swedish Institute of Computer Science.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the Contiki operating system.
* $Id: battery-sensor.h,v 1.3 2006/06/18 08:07:30 adamdunkels Exp $
*
* @(#)$Id: dtc.h,v 1.1 2006/06/18 07:49:34 adamdunkels Exp $
*/
/**
* \addtogroup dtc
* -----------------------------------------------------------------
*
* @{
* Author : Adam Dunkels, Joakim Eriksson, Niclas Finne
* Created : 2005-11-01
* Updated : $Date: 2006/06/18 08:07:30 $
* $Revision: 1.3 $
*/
/**
* \file
* Header file for the distributed TCP caching implementation.
* \author Adam Dunkels <adam@sics.se>
*
*/
#ifndef __BATTERY_SENSOR_H__
#define __BATTERY_SENSOR_H__
#include "lib/sensors.h"
extern const struct sensors_sensor battery_sensor;
#ifndef __DTC_H__
#define __DTC_H__
#define BATTERY_SENSOR "Battery"
#include "uip.h"
#include "uipopt.h"
void dtc_init(void);
u8_t dtc_input(u8_t *packetptr, u16_t len);
PROCESS_NAME(dtc_process);
#endif /* __DTC_H__ */
/** @} */
#endif /* __BATTERY_SENSOR_H__ */

164
platform/esb/dev/beep.c Normal file
View File

@ -0,0 +1,164 @@
/*
* Copyright (c) 2005, Swedish Institute of Computer Science
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the Contiki operating system.
*
* @(#)$Id: beep.c,v 1.3 2006/06/18 08:07:30 adamdunkels Exp $
*/
#include <io.h>
#include "contiki-esb.h"
/*
* Flag to indicate if any of these functions should generate a sound
* or not The function is used beep_off() to to change this flag so
* none of the functions will generate sounds.
*/
static unsigned char beep_flag = BEEP_ON;
/*
* BEEPER_BIT is the bit in the io-register that is connected to the actual
* beeper, setting the bit high vill generate a high pitch tone.
*/
#define BEEPER_BIT 0x08
/*-----------------------------------------------------------------------------------*/
void
beep_alarm(int alarmmode, int len)
{
len = len / 200;
while(len > 0) {
/*
* Check here if we should beep or not since if we do it outside the
* while loop the call to this function would take muck less time, i.e.
* beep_flag would have side effects that might not be predictable.
*/
if(beep_flag & BEEP_ON) {
if((alarmmode == BEEP_ALARM1) && ((len & 7) > 4)) {
P2OUT |= BEEPER_BIT;
} else if((alarmmode == BEEP_ALARM2) && ((len & 15) > 12)) {
P2OUT |= BEEPER_BIT;
} else {
P2OUT &= ~BEEPER_BIT;
}
}
clock_delay(200);
len--;
}
P2OUT &= ~BEEPER_BIT;
}
/*-----------------------------------------------------------------------------------*/
void
beep_beep(int i)
{
if(beep_flag & BEEP_ON) {
/* Beep. */
P2OUT |= BEEPER_BIT;
clock_delay(i);
P2OUT &= ~BEEPER_BIT;
}
}
/*-----------------------------------------------------------------------------------*/
void
beep(void)
{
beep_beep(20);
}
/*-----------------------------------------------------------------------------------*/
void
beep_down(int d)
{
int i;
for(i = 8; i < d; i += i / 8) {
beep_beep(10);
clock_delay(i);
}
}
/*-----------------------------------------------------------------------------------*/
void
beep_on(void)
{
beep_flag |= BEEP_ON;
}
/*-----------------------------------------------------------------------------------*/
void
beep_off(void)
{
beep_flag &= ~BEEP_ON;
}
/*-----------------------------------------------------------------------------------*/
void
beep_spinup(void)
{
unsigned int i;
for(i = 10000; i > 80; i -= i / 20) {
beep_beep(2);
clock_delay(i);
}
for(i = 4980; i > 2000; i -= 20) {
leds_on(LEDS_ALL);
clock_delay(5000 - i);
leds_off(LEDS_ALL);
clock_delay(i);
}
}
/*-----------------------------------------------------------------------------------*/
void
beep_quick(int n)
{
int i;
for(i = 0; i < n; ++i) {
beep_beep(2000);
clock_delay(20000);
}
}
/*-----------------------------------------------------------------------------------*/
void beep_long(clock_time_t len) {
/*
* Check if the beeper is turned on or off, i.e. if a call should generate
* a noise or not.
*/
if(beep_flag & BEEP_ON) {
/* Turn on the beeper. */
P2OUT |= BEEPER_BIT;
}
clock_wait(len);
if(beep_flag & BEEP_ON) {
/* Turn the beeper off. */
P2OUT &= ~BEEPER_BIT;
}
}
/*-----------------------------------------------------------------------------------*/

166
platform/esb/dev/beep.h Normal file
View File

@ -0,0 +1,166 @@
/*
* Copyright (c) 2005, Swedish Institute of Computer Science
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the Contiki operating system.
*
* @(#)$Id: beep.h,v 1.3 2006/06/18 08:07:31 adamdunkels Exp $
*/
/**
* \addtogroup esb
* @{
*/
/**
* \defgroup beeper Beeper interface
* @{
*/
/**
* \file
* Interface to the beeper.
* \author Adam Dunkels <adam@sics.se>
*
*/
#ifndef __BEEP_H__
#define __BEEP_H__
#define BEEP_ON 1
#define BEEP_OFF 0
#define BEEP_ALARM1 1
#define BEEP_ALARM2 2
#include "sys/clock.h"
/**
* Beep for a specified time.
*
* This function causes the beeper to beep for the specified time. The
* time is measured in the same units as for the clock_delay()
* function.
*
* \note This function will hang the CPU during the beep.
*
* \note This function will stop any beep that was on previously when this
* function ends.
*
* \note If the beeper is turned off with beep_off() this call will still
* take the same time, though it will be silent.
*
* \param len The length of the beep.
*
*/
void beep_beep(int len);
/**
* Beep an alarm for a specified time.
*
* This function causes the beeper to beep for the specified time. The
* time is measured in the same units as for the clock_delay()
* function.
*
* \note This function will hang the CPU during the beep.
*
* \note This function will stop any beep that was on previously when this
* function ends.
*
* \note If the beeper is turned off with beep_off() this call will still
* take the same time, though it will be silent.
*
* \param alarmmode The alarm mode (BEEP_ALARM1,BEEP_ALARM2)
* \param len The length of the beep.
*
*/
void beep_alarm(int alarmmode, int len);
/**
* Produces a quick click-like beep.
*
* This function produces a short beep that sounds like a click.
*
*/
void beep(void);
/**
* A beep with a pitch-bend down.
*
* This function produces a pitch-bend sound with deecreasing
* frequency.
*
* \param len The length of the pitch-bend.
*
*/
void beep_down(int len);
/**
* Turn the beeper on.
*
* This function turns on the beeper. The beeper is turned off with
* the beep_off() function.
*/
void beep_on(void);
/**
* Turn the beeper off.
*
* This function turns the beeper off after it has been turned on with
* beep_on().
*/
void beep_off(void);
/**
* Produce a sound similar to a hard-drive spinup.
*
* This function produces a sound that is intended to be similar to
* the sound a hard-drive makes when it starts.
*
*/
void beep_spinup(void);
/**
* Beep for a long time (seconds)
*
* This function produces a beep with the specified length and will
* not return until the beep is complete. The length of the beep is
* specified using CLOCK_SECOND: a two second beep is CLOCK_SECOND *
* 2, and a quarter second beep is CLOCK_SECOND / 4.
*
* \note If the beeper is turned off with beep_off() this call will still
* take the same time, though it will be silent.
*
* \param len The length of the beep, measured in units of CLOCK_SECOND
*/
void beep_long(clock_time_t len);
void beep_quick(int num);
/** @} */
/** @} */
#endif /* __BEEP_H__ */

View File

@ -0,0 +1,108 @@
/*
* Copyright (c) 2005, Swedish Institute of Computer Science
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the Contiki operating system.
*
* @(#)$Id: button-sensor.c,v 1.3 2006/06/18 08:07:31 adamdunkels Exp $
*/
#include "contiki-esb.h"
const struct sensors_sensor button_sensor;
static struct timer debouncetimer;
HWCONF_PIN(BUTTON, 2, 7);
HWCONF_IRQ(BUTTON, 2, 7);
/*---------------------------------------------------------------------------*/
static void
init(void)
{
timer_set(&debouncetimer, 0);
BUTTON_IRQ_EDGE_SELECTD();
BUTTON_SELECT();
BUTTON_MAKE_INPUT();
}
/*---------------------------------------------------------------------------*/
static int
irq(void)
{
if(BUTTON_CHECK_IRQ()) {
if(timer_expired(&debouncetimer)) {
timer_set(&debouncetimer, CLOCK_SECOND / 4);
sensors_changed(&button_sensor);
return 1;
}
}
return 0;
}
/*---------------------------------------------------------------------------*/
static void
activate(void)
{
sensors_add_irq(&button_sensor, BUTTON_IRQ_PORT());
BUTTON_ENABLE_IRQ();
}
/*---------------------------------------------------------------------------*/
static void
deactivate(void)
{
BUTTON_DISABLE_IRQ();
sensors_remove_irq(&button_sensor, BUTTON_IRQ_PORT());
}
/*---------------------------------------------------------------------------*/
static int
active(void)
{
return BUTTON_IRQ_ENABLED();
}
/*---------------------------------------------------------------------------*/
static unsigned int
value(int type)
{
return BUTTON_READ() || !timer_expired(&debouncetimer);
}
/*---------------------------------------------------------------------------*/
static int
configure(int type, void *c)
{
return 0;
}
/*---------------------------------------------------------------------------*/
static void *
status(int type)
{
return NULL;
}
/*---------------------------------------------------------------------------*/
SENSORS_SENSOR(button_sensor, BUTTON_SENSOR,
init, irq, activate, deactivate, active,
value, configure, status);

View File

@ -1,40 +1,42 @@
/*
* Copyright (c) 2005, Swedish Institute of Computer Science
* All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the Contiki operating system.
*
* @(#)$Id: rs232-slip-drv.h,v 1.1 2006/06/18 07:49:34 adamdunkels Exp $
* @(#)$Id: button-sensor.h,v 1.3 2006/06/18 08:07:31 adamdunkels Exp $
*/
#ifndef __RS232_SLIP_DRV_H__
#define __RS232_SLIP_DRV_H__
#ifndef __BUTTON_SENSOR_H__
#define __BUTTON_SENSOR_H__
void rs232_slip_drv_init(void *);
#include "lib/sensors.h"
void rs232_slip_drv_request_poll(void);
extern const struct sensors_sensor button_sensor;
#endif /* __RS232_SLIP_DRV_H__ */
#define BUTTON_SENSOR "Button"
#endif /* __BUTTON_SENSOR_H__ */

View File

@ -1,102 +0,0 @@
/*
* Copyright (c) 2005, Swedish Institute of Computer Science
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the Contiki operating system.
*
* @(#)$Id: dtc-conf.h,v 1.1 2006/06/18 07:49:33 adamdunkels Exp $
*/
/**
* \file
* Configuration options for the distributed TCP caching module.
* \author Adam Dunkels <adam@sics.se>
*/
#ifndef __DTC_CONF_H__
#define __DTC_CONF_H__
#include "uipopt.h"
/**
* The maximum size of a TCP segment (excluding headers) that can be
* cached by the distributed TCP caching module.
*
* The distributed TCP caching module statically allocates memory for
* holding cached TCP segments. This configuration parameter sets the
* size of those blocks. The DTC_CONF_NUM_SEGMENTS configuration
* parameter sets the number of packet caches that are allocated.
*
* \hideinitializer
*/
#define DTC_CONF_MAX_SEGSIZE UIP_TCP_MSS
/**
* The number of TCP segments that the distributed TCP caching module can hold.
*
* This configuration parameter affects how much memory is allocated
* to the TCP segment cache. The size of each cache block is set with
* the DTC_CONF_MAX_SEGSIZE parameter.
*
* \hideinitializer
*/
#define DTC_CONF_NUM_SEGMENTS 1
/**
* The number of simulataneous TCP connections that the distributed TCP caching can handle simulataneously.
*
* This configuration parameter specifies the maximum amount of
* simultaneous TCP connections that can be handled by the distributed
* TCP caching module. Note that this parameter does not limit the
* amount of TCP connections that can go through the node, only how
* many connections that will benefit from the help of the distributed
* TCP caching mechanism.
*
* \hideinitializer
*/
#define DTC_CONF_NUM_CONNECTIONS 1
/**
* Type definition of the native unsigned 32-bit datatype.
*
* This configuration option defines the native 32-bit datatype for
* the platform on which the distributed TCP caching mechanism is to
* be run. Normally, the unsigned 32-bit datatype is "unsigned long",
* but check the manual for the C compiler to be sure.
*/
typedef unsigned long u32_t;
/**
* Type definition of the native signed 32-bit datatype.
*
* This configuration option defines the native 32-bit datatype for
* the platform on which the distributed TCP caching mechanism is to
* be run. Normally, the signed 32-bit datatype is "signed long", but
* check the manual for the C compiler to be sure.
*/
typedef signed long s32_t;
#endif /* __DTC_CONF_H__ */

View File

@ -1,80 +0,0 @@
/*
* Copyright (c) 2005, Swedish Institute of Computer Science
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the Contiki operating system.
*
* @(#)$Id: dtc-nullservice.c,v 1.1 2006/06/18 07:49:34 adamdunkels Exp $
*/
#include "contiki.h"
#include "dtc-service.h"
#include "uip-fw.h"
static u8_t input(void) {return UIP_FW_OK;}
static u8_t output(void) {return UIP_FW_OK;}
static const struct dtc_service_interface state =
{
DTC_SERVICE_VERSION,
input,
output
};
EK_EVENTHANDLER(eventhandler, ev, data);
/*EK_POLLHANDLER(pollhandler);*/
EK_PROCESS(p, DTC_SERVICE_NAME ": null", EK_PRIO_NORMAL,
eventhandler, NULL/*pollhandler*/, (void *)&state);
/*---------------------------------------------------------------------------*/
EK_PROCESS_INIT(dtc_service_init, arg)
{
ek_service_start(DTC_SERVICE_NAME, &p);
}
/*---------------------------------------------------------------------------*/
EK_EVENTHANDLER(eventhandler, ev, data)
{
switch(ev) {
case EK_EVENT_INIT:
case EK_EVENT_REPLACE:
break;
case EK_EVENT_REQUEST_REPLACE:
ek_replace((struct ek_proc *)data, NULL);
break;
case EK_EVENT_REQUEST_EXIT:
ek_exit();
break;
default:
break;
}
}
/*---------------------------------------------------------------------------*/
/*EK_POLLHANDLER(pollhandler)
{
}*/
/*---------------------------------------------------------------------------*/

View File

@ -1,45 +0,0 @@
/*
* Copyright (c) 2005, Swedish Institute of Computer Science
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the Contiki operating system.
*
* @(#)$Id: dtc-service.h,v 1.1 2006/06/18 07:49:34 adamdunkels Exp $
*/
#ifndef __DTC_SERVICE_H__
#define __DTC_SERVICE_H__
#include "contiki.h"
#define dtc_service_name "DTC"
SERVICE_INTERFACE(dtc_service, {
u8_t (* input)(u8_t *p, u16_t len); /* Called when data arrives. */
u8_t (* output)(void); /* Called to send data. */
});
#endif /* __DTC_SERVICE_H__ */

View File

@ -1,612 +0,0 @@
/*
* Copyright (c) 2005, Swedish Institute of Computer Science
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the Contiki operating system.
*
* @(#)$Id: dtc.c,v 1.1 2006/06/18 07:49:34 adamdunkels Exp $
*/
/**
* \defgroup dtc Distributed TCP caching
*
* Distributed TCP Caching (DTC) is a mechanism that helps to improve
* the energy efficiency of TCP in wireless sensor networks.
*
* @{
*/
/**
* \file
* Implementation of the distributed TCP caching mechanism for uIP.
* \author Adam Dunkels <adam@sics.se>
*
*/
#include "contiki.h"
#include "dtc-service.h"
#include "uip-fw.h"
#include "dtc.h"
#include "dtc-conf.h"
#include "uip.h"
#include "uip-fw.h"
#include "uip_arch.h"
#include "list.h"
#include "contiki.h"
/*------------------------------------------------------------------------------*/
/**
* \internal
* The TCP and IP headers.
*/
struct tcpip_hdr {
/* IP header. */
u8_t vhl,
tos;
u16_t len;
u8_t ipid[2],
ipoffset[2],
ttl,
proto;
u16_t ipchksum;
u32_t srcipaddr,
destipaddr;
/* TCP header. */
u16_t srcport,
destport;
u32_t seqno, ackno;
u8_t tcpoffset,
flags;
u16_t wnd;
u16_t tcpchksum;
u8_t urgp[2];
u8_t data[4];
};
/**
* \internal
* Structure for keeping the state of one TCP end-point.
*/
struct dtc_tcpend {
u32_t ipaddr; /**< The IP address of the end-point. */
u32_t seqno; /**< The next expected TCP sequence number from the
end-point. */
u32_t rttseq; /**< The sequence number for which an RTT
measurement is currently being made, or 0 if no
measurement is being made. */
u16_t port; /**< The TCP port number of the end-point. */
u16_t window; /**< The receiver window for the end-point. */
int sa; /**< The smoothed avergage for the RTT
estimations. */
int sv; /**< The smoothed variance for the RTT
estimations. */
u8_t rto; /**< The RTO generated from the RTT estimations. */
u8_t tmr; /**< Timer. */
u8_t nrtx; /**< Number of retransmissions performed by the
distributed TCP snoop module. */
};
/**
* \internal
* The structure holding the state of a TCP connection.
*/
struct dtc_conn {
struct dtc_conn *next;
list_t segments;
struct dtc_tcpend e1; /**< First TCP end-point. */
struct dtc_tcpend e2; /**< Second TCP end-point. */
u8_t tmr; /**< Timer. */
};
/**
* \internal
* The structure holding a cached TCP segment.
*/
struct dtc_segment {
struct dtc_segment *next;
struct tcpip_hdr hdr; /**< The TCP and IP headers of the
packet. */
struct dtc_conn *conn; /**< Pointer to the connection that the
segment belongs to. */
u16_t len; /**< The length of the segment,
measured in TCP bytes. */
u8_t data[DTC_CONF_MAX_SEGSIZE];
/**< The data contained in the
segment. */
u8_t tmr; /**< Timer - starts at 0 and counts
upward every time
dtc_periodic() is invoked. */
};
/**
* \internal
* The list of cached TCP segments.
*/
MEMB(segments, sizeof(struct dtc_segment), DTC_CONF_NUM_SEGMENTS);
/*static struct dtc_segment segments[DTC_CONF_NUM_SEGMENTS];*/
/**
* \internal
* The list of TCP connections for which the distributed TCP snoop
* mechanism is active.
*/
MEMB(conns, sizeof(struct dtc_conn), DTC_CONF_NUM_CONNECTIONS);
/*static struct dtc_conn conns[DTC_CONF_NUM_CONNECTIONS];*/
LIST(connlist);
#define TCP_SEQ_LT(a,b) ((s32_t)((a)-(b)) < 0)
#define TCP_SEQ_LEQ(a,b) ((s32_t)((a)-(b)) <= 0)
#define TCP_SEQ_GT(a,b) ((s32_t)((a)-(b)) > 0)
#define TCP_SEQ_GEQ(a,b) ((s32_t)((a)-(b)) >= 0)
#define TCP_FIN 0x01
#define TCP_SYN 0x02
#define TCP_RST 0x04
#define TCP_PSH 0x08
#define TCP_ACK 0x10
#define TCP_URG 0x20
#define TCP_CTL 0x3f
/**
* \internal
* The length of the standard IP header, without IP options.
*/
#define IP_HLEN 20
/**
* \internal
* The start value of the retransmission time-out.
*/
#define RTO 30
static u32_t htonl(u32_t n);
static u8_t input(u8_t *packetptr, u16_t len);
static u8_t output(void) {return UIP_FW_OK;}
SERVICE(dtc_service, dtc_service, { input, output });
PROCESS(dtc_process, "Distributed TCP Caching");
/*------------------------------------------------------------------------------*/
/**
* Initialize the distributed snoop module.
*
* This function initializes the distributed snoop module and must be
* called before any of the other functions are used.
*/
/*------------------------------------------------------------------------------*/
static void
init_dtc(void)
{
memb_init(&conns);
memb_init(&segments);
list_init(connlist);
/* list_init(segmentlist);*/
}
/*------------------------------------------------------------------------------*/
/**
* \internal
* Save a segment in the segment cache.
*
* \param hdr Pointer to the header of the segment.
* \param len The length of the segment.
*
* \return A pointer to the cached segment, or NULL if the cache was full.
*
*/
/*------------------------------------------------------------------------------*/
static struct dtc_segment *
cache_segment(struct dtc_conn *conn,
struct tcpip_hdr *hdr, u16_t len)
{
struct dtc_segment *s;
/* Check if there are any unused slots in the segment cache. */
s = (struct dtc_segment *)memb_alloc(&segments);
if(s == NULL) {
/* Here we might try to make room in the segment cache, but for
now we simply return. */
return NULL;
}
/* Do some sanity checks on the segment to be cached. */
if(len < 40 ||
len - 40 > DTC_CONF_MAX_SEGSIZE) {
return NULL;
}
/* Calculate the length of the segment in TCP bytes. We do this by
taking the length of the IP packet, and subtract the size of the
IP and TCP headers. Since we only allow IP packets without
options, we know that the IP header is 20 bytes large, and we use
the header offset field of the TCP header to calculate the length
of the TCP header + options.
Finally, if the segment has the SYN or FIN flags set, we add one
to the segment length. */
s->len = htons(hdr->len) - IP_HLEN - ((hdr->tcpoffset >> 4) << 2);
if((hdr->flags & (TCP_SYN | TCP_FIN)) != 0) {
++s->len;
}
/* If there is no TCP data in the segment, there is no need to cache
it. */
if(s->len == 0) {
return NULL;
}
s->tmr = 0;
/* Copy the TCP/IP headers. */
memcpy(&s->hdr, hdr, 40);
/* Copy the segment data. */
memcpy(&s->data, &hdr->data[0], len - 40);
/* Add segment to list of segments on the connection's list. */
list_add(conn->segments, s);
return s;
}
/*------------------------------------------------------------------------------*/
/**
* \internal
* Process an incoming TCP segment for a connection.
*/
/*------------------------------------------------------------------------------*/
static u8_t
process_segment(struct dtc_conn *conn,
struct dtc_tcpend *src,
struct dtc_tcpend *dst,
u8_t *packetptr, u16_t len)
{
struct tcpip_hdr *hdr;
struct dtc_segment *s;
int m;
hdr = (struct tcpip_hdr *)packetptr;
/* Check if the incoming segment acknowledges one in the segment
list of the connection. */
for(s = list_head(conn->segments); s != NULL; s = s->next) {
printf("process_segment: for this conn, ack %d, ack %lu, seq %lu\n",
(hdr->flags & TCP_ACK), htonl(hdr->ackno),
htonl(s->hdr.seqno) + s->len);
/* Check if the incoming segment acknowledges this one. If so,
we should drop the cached segment and possibly do RTT
measurements. */
if((s->hdr.srcipaddr == hdr->destipaddr) &&
(hdr->flags & TCP_ACK) != 0 &&
TCP_SEQ_GEQ(htonl(hdr->ackno), htonl(s->hdr.seqno) + s->len)) {
/* Do RTT estimation, unless we have done retransmissions. */
if(src->rttseq != 0 &&
TCP_SEQ_GEQ(htonl(hdr->ackno), src->rttseq) &&
src->nrtx == 0) {
printf("Performing RTT estimation for seqno %lu (timer %d)\n",
src->rttseq, src->tmr);
m = src->tmr;
/* This is taken directly from VJs original code in his paper */
m = m - (src->sa >> 3);
src->sa += m;
if(m < 0) {
m = -m;
}
m = m - (src->sv >> 2);
src->sv += m;
src->rto = (src->sa >> 3) + src->sv;
src->rttseq = 0;
printf("Performing RTO stuff, new rto %d\n", src->rto);
}
src->tmr = 0;
printf("process_segment: bropping acked segment.\n");
/* s->state = STATE_FREE;*/
list_remove(conn->segments, s);
memb_free(&segments, s);
/* Next, check if the incoming packet has the same sequence
number as one of the segments in the cache. If so, it is
either a retransmission or a duplicated packet. In any
case, the RTT estimation would be thwarted if we made
estimations, so we cancel any running RTT measurements. */
} else if(s->hdr.seqno == hdr->seqno) {
if(s->hdr.srcipaddr == hdr->srcipaddr) {
src->rttseq = 0;
} else {
dst->rttseq = 0;
}
}
}
s = cache_segment(conn, hdr, len);
if(s != NULL) {
s->conn = conn;
if(dst->rttseq == 0) {
dst->rttseq = htonl(hdr->seqno);
dst->tmr = 0;
printf("Starting RTT est for %lu\n", dst->rttseq);
}
printf("Process_segment: segment cached\n");
} else {
printf("Process_segment: segment not cached \n");
}
return uip_fw_forward();
}
/*------------------------------------------------------------------------------*/
/**
* Process an incoming packet by running it through the distributed
* TCP snooping mechanism, and possibly by forwarding it.
*
* This function processes an incoming packet, and should be called
* from the network device driver for every packet that arrives. The
* function might call uip_fw_output() to send out packets.
*
* \param packetptr A pointer to the first byte of the packet header
* of the incoming packet. The packet must follow contiguously the
* header in memory.
*
* \param len The length of the packet, including the packet header.
*
* \retval UIP_FW_OK If the packet should be further processed by the
* caller.
*
* \retval UIP_FW_FORWARDED If the packet was forwarded and therefor
* should not be further processed.
*/
/*------------------------------------------------------------------------------*/
static u8_t
input(u8_t *packetptr, u16_t len)
{
struct tcpip_hdr *hdr;
struct dtc_conn *c;
hdr = (struct tcpip_hdr *)packetptr;
/* XXX: when testing, only run dtc for connections on port 12347. */
if(hdr->proto != UIP_PROTO_TCP ||
(hdr->destport != HTONS(12347) && hdr->srcport != HTONS(12347))) {
return uip_fw_forward();
}
printf("dtc_input (%d, %d): vhl 0x%x proto %d len %d ipchk 0x%x\n",
node_x(), node_y(),
hdr->vhl, hdr->proto, HTONS(hdr->len),
uip_ipchksum());
/* First, do some initial checking on the packet to make sure that
it is an undamaged TCP packet. Note that the checks are placed in
an order with the most computationally expensive at the end. */
if(hdr->vhl == 0x45 && /* IP version and header length must be normal. */
/* It must be a TCP packet. */
hdr->proto == UIP_PROTO_TCP &&
/* We do not allow IP fragments. */
hdr->ipoffset[1] == 0 &&
(hdr->ipoffset[0] & 0x3f) == 0 &&
/* We do not process segments destined for ourselves. */
hdr->destipaddr != *(u32_t *)uip_hostaddr &&
/* The packet length must not exceed the size of the segment
cache. */
(DTC_CONF_MAX_SEGSIZE + 40) >= HTONS(hdr->len) &&
/* The IP checksum must be OK. */
uip_ipchksum() == 0xffff &&
/* The TCP checksum must be OK. */
uip_tcpchksum() == 0xffff) {
/* Check if this segment belongs to a connection for which DTC
currently is active. Also keep track of the first unused
connection, in case we need to allocated it further down. */
for(c = list_head(connlist); c != NULL; c = c->next) {
if(c->e1.ipaddr == hdr->destipaddr &&
c->e1.port == htons(hdr->destport) &&
c->e2.ipaddr == hdr->srcipaddr &&
c->e2.port == htons(hdr->srcport)) {
printf("dtc_input %d, %d: process segment 1\n",
node_x(), node_y());
return process_segment(c, &c->e2, &c->e1,
packetptr, len);
} else if(c->e2.ipaddr == hdr->destipaddr &&
c->e2.port == htons(hdr->destport) &&
c->e1.ipaddr == hdr->srcipaddr &&
c->e1.port == htons(hdr->srcport)) {
printf("dtc_input %d, %d: process segment 2\n", node_x(), node_y());
return process_segment(c, &c->e1, &c->e2,
packetptr, len);
/* } else {
printf("dtc_input %d, %d: not processing segment\n",
node_x(), node_y());
return UIP_FW_LOCAL;*/
}
}
/* The incoming segment did not belong to any active connections,
so we allocate a new connection if there is a free one that we
can use. */
printf("dtc_input %d, %d: creating new connection\n", node_x(), node_y());
c = (struct dtc_conn *)memb_alloc(&conns);
list_add(connlist, c);
/* Fill in the fields from the incoming header. */
c->e1.ipaddr = hdr->srcipaddr;
c->e1.seqno = htonl(hdr->seqno);
c->e1.rttseq = 0;
c->e1.port = htons(hdr->srcport);
c->e1.window = htons(hdr->wnd);
c->e1.sa = 16;
c->e1.sv = 0;
c->e1.rto = RTO;
c->e1.tmr = 0;
c->e1.nrtx = 0;
c->e2.ipaddr = hdr->destipaddr;
c->e2.seqno = htonl(hdr->ackno);
c->e2.rttseq = 0;
c->e2.port = htons(hdr->destport);
c->e2.window = 0;
c->e2.sa = 16;
c->e2.sv = 0;
c->e2.rto = RTO;
c->e2.tmr = 0;
c->e2.nrtx = 0;
return process_segment(c, &c->e1, &c->e2, packetptr, len);
}
return uip_fw_forward();
}
/*------------------------------------------------------------------------------*/
/**
* \internal
* Perform periodic processing for a specific connection end-point.
*
* The periodic processing does two things: update timers and
* retransmit segments, where the timers drive the
* retransmissions. This must be done on a per-TCP-endpoint basis,
* rather than on a per-TCP-connection basis, because we maintain an
* RTT estimate for each endpoint. The reason for not having a single
* RTT for each TCP connection is that this node may be located on a
* path with a very long delay to one end and a very short delay to
* the other.
*/
/*------------------------------------------------------------------------------*/
static void
periodic_endpoint(struct dtc_tcpend *c)
{
++c->tmr;
/* If the timer has reached its threshold value, we should
retransmit the segment with the lowest sequence number, if
cached. */
if(c->tmr == c->rto) {
printf("periodic_endpoint: should do retransmission.\n");
c->tmr = 0;
}
}
/*------------------------------------------------------------------------------*/
/**
* Perform periodic processing.
*
* This function does the periodic processing in the distributed snoop
* module. It should be called as often as the uIP periodic function
* is called, typically twice a second.
*
*/
/*------------------------------------------------------------------------------*/
static void
periodic(void)
{
struct dtc_segment *s;
struct dtc_conn *c;
/* for(i = 0; i < DTC_CONF_NUM_CONNECTIONS; ++i) {
c = &conns[i];
if(c->state == STATE_USED) {
periodic_endpoint(&c->e1);
periodic_endpoint(&c->e2);
}
}
for(i = 0; i < DTC_CONF_NUM_SEGMENTS; ++i) {
s = &segments[i];
if(s->state == STATE_USED) {
++s->tmr;
}
}*/
}
/*------------------------------------------------------------------------------*/
/**
* \internal
* Convert a 32-bit unsigned value from host to network byte order.
*
* \param n The 32-bit value to be converted.
*
* \return The converted 32-bit value.
*
*/
/*------------------------------------------------------------------------------*/
static u32_t
htonl(u32_t n)
{
#if BYTE_ORDER == BIG_ENDIAN
return n;
#else /* BYTE_ORDER == BIG_ENDIAN */
return (((u32_t)n & 0xff) << 24) |
(((u32_t)n & 0xff00) << 8) |
(((u32_t)n & 0xff0000) >> 8) |
(((u32_t)n & 0xff000000) >> 24);
#endif /* BYTE_ORDER == BIG_ENDIAN */
}
/*------------------------------------------------------------------------------*/
PROCESS_THREAD(dtc_process, ev, data)
{
static struct etimer et;
PROCESS_BEGIN();
init_dtc();
SERVICE_REGISTER(dtc_service);
while(1) {
etimer_set(&et, CLOCK_SECOND / 2);
PROCESS_YIELD_UNTIL(etimer_expired(&et));
periodic();
}
PROCESS_END();
}
/*---------------------------------------------------------------------------*/
/** @} */

View File

@ -1,72 +0,0 @@
/*
* Copyright (c) 2005, Swedish Institute of Computer Science
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the Contiki operating system.
*
* @(#)$Id: rs232-slip-drv.c,v 1.1 2006/06/18 07:49:34 adamdunkels Exp $
*/
#include "contiki.h"
#include "uip.h"
#include "tcpip.h"
#include "rs232-slip.h"
EK_POLLHANDLER(pollhandler);
EK_EVENTHANDLER(eventhandler, ev, data);
EK_PROCESS(p, "SLIP driver", EK_PRIO_HIGH,
eventhandler, pollhandler, NULL);
static ek_id_t id = EK_ID_NONE;
/*---------------------------------------------------------------------------*/
EK_POLLHANDLER(pollhandler)
{
uip_len = rs232_slip_poll();
tcpip_input();
}
/*---------------------------------------------------------------------------*/
EK_PROCESS_INIT(rs232_slip_drv_init, arg)
{
arg_free(arg);
if(id == EK_ID_NONE) {
id = ek_start(&p);
}
}
/*---------------------------------------------------------------------------*/
EK_EVENTHANDLER(eventhandler, ev, data)
{
EK_EVENTHANDLER_ARGS(ev, data);
}
/*---------------------------------------------------------------------------*/
void
rs232_slip_drv_request_poll(void)
{
ek_request_poll(id);
}
/*---------------------------------------------------------------------------*/