Battery monitor sensors

examples/6/Makefile

@@ -0,0 +1,12 @@
+CONTIKI_PROJECT = sensebattery
+PLATFORMS_ONLY = cc26x0-cc13x0
+all: $(CONTIKI_PROJECT)
+
+CONTIKI = ../..
+
+PLATFORMS_EXCLUDE = nrf52dk
+
+#use this to enable TSCH: MAKE_MAC = MAKE_MAC_TSCH
+MAKE_MAC ?= MAKE_MAC_CSMA
+MAKE_NET = MAKE_NET_NULLNET
+include $(CONTIKI)/Makefile.include

examples/6/project-conf.h

@@ -0,0 +1,43 @@
+/*
+ * Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holder nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
+ * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/*---------------------------------------------------------------------------*/
+#ifndef PROJECT_CONF_H_
+#define PROJECT_CONF_H_
+/*---------------------------------------------------------------------------*/
+/* Enable the ROM bootloader */
+#define CCXXWARE_CONF_ROM_BOOTLOADER_ENABLE   1
+/*---------------------------------------------------------------------------*/
+/* Change to match your configuration */
+#define IEEE802154_CONF_PANID            0xABCD
+#define IEEE802154_CONF_DEFAULT_CHANNEL      25
+#define RF_BLE_CONF_ENABLED                   1
+/*---------------------------------------------------------------------------*/
+#endif /* PROJECT_CONF_H_ */
+/*---------------------------------------------------------------------------*/

examples/6/sensebattery.c

@@ -0,0 +1,53 @@
+#include "net/netstack.h"
+#include "net/nullnet/nullnet.h"
+#include <stdio.h>
+#include <string.h>
+#include "sys/log.h"
+#define LOG_MODULE "App"
+#define LOG_LEVEL LOG_LEVEL_INFO
+
+#include "os/dev/serial-line.h"
+#include "arch/cpu/cc26x0-cc13x0/dev/cc26xx-uart.h"
+//#include "os/dev/leds.h"
+//#include "os/dev/button-hal.h"
+#include "batmon-sensor.h"
+
+PROCESS(contiki_main_process, "Battery monitor sensor test");
+AUTOSTART_PROCESSES(&contiki_main_process);
+
+
+void print_battery_status(void) {
+	static int temp, volt;
+	temp = batmon_sensor.value(BATMON_SENSOR_TYPE_TEMP);
+	volt = batmon_sensor.value(BATMON_SENSOR_TYPE_VOLT);
+	printf("Battery: temperature: %d, volt %d\n", temp, (volt * 125) >> 5);
+	
+
+}
+
+PROCESS_THREAD(contiki_main_process, ev, data) {
+	PROCESS_BEGIN();
+	SENSORS_ACTIVATE(batmon_sensor);
+
+	static struct etimer my_timer;
+
+	etimer_set(&my_timer, 2 * CLOCK_SECOND);
+	
+	cc26xx_uart_set_input(serial_line_input_byte);
+	serial_line_init();
+
+	printf("Hello world\n");
+
+	while (true) {
+		PROCESS_WAIT_EVENT();
+
+		if (ev == PROCESS_EVENT_TIMER) {
+			print_battery_status();
+			etimer_reset(&my_timer);
+		}
+	}
+
+		PROCESS_END();
+}
+
+