Expanded travis builds with SimpleLink platform

In addition, some small grammar fixes and slight bugfix in
Makefile.simplelink

.gitignore

@@ -33,6 +33,7 @@ COOJA.testlog
 *.native
 *.nrf52dk
 *.openmote-cc2538
+*.simplelink
 *.sky
 *.firmware
 *.srf06-cc26xx

arch/cpu/simplelink-cc13xx-cc26xx/cc13x0-cc26x0/cc13x0-cc26x0.lds

@@ -30,7 +30,7 @@
  * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-MIN_STACKSIZE = 0x800;  /* 2048 bytes */
+MIN_STACKSIZE = 0x600;  /* 1536 bytes */
 HEAPSIZE      = 0x100;  /* 256 bytes */
 
 MEMORY

arch/cpu/simplelink-cc13xx-cc26xx/cc13x2-cc26x2/cc13x2-cc26x2.lds

@@ -30,7 +30,7 @@
  * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-MIN_STACKSIZE = 0x800;  /* 2048 bytes */
+MIN_STACKSIZE = 0x600;  /* 1536 bytes */
 HEAPSIZE      = 0x100;  /* 256 bytes */
 
 MEMORY

arch/cpu/simplelink-cc13xx-cc26xx/cc13xx-cc26xx-conf.h

@@ -91,7 +91,7 @@
  */
 
 /*
- * Set the inactivity timeout peroid for the RF driver. This determines how
+ * Set the inactivity timeout period for the RF driver. This determines how
  * long the RF driver will wait when inactive until turning off the RF Core.
  * Specified in microseconds.
  */

arch/platform/simplelink/Makefile.simplelink

@@ -24,7 +24,7 @@ verify_family = $(shell [ -d $(CONTIKI)/arch/platform/simplelink/$(1)/$(BOARD) ]
 # Test each supported SimpleLink family and see if it contains the specified Board.
 # Throw an error if it isn't found.
 FAMILY := $(foreach FAMILY, $(SIMPLELINK_FAMILIES), $(call verify_family,$(FAMILY)))
-ifeq ($(FAMILY),)
+ifeq ($(strip $(FAMILY)),)
  $(error Board '$(BOARD)' does not corresponding to any SimpleLink family. Make sure your BOARD variable is correct.)
 endif
 # If multiple families are found, only the first one is chosen. If this ever

arch/platform/simplelink/cc13xx-cc26xx/Makefile.cc13xx-cc26xx

@@ -25,20 +25,22 @@ TARGET_FAMILY_DIRS += $(BOARD)
 CONTIKI_TARGET_DIRS += $(FAMILY)
 CONTIKI_TARGET_DIRS += $(addprefix $(FAMILY)/, $(TARGET_FAMILY_DIRS))
 
-DEFINES += DeviceFamily_$(DEVICE_FAMILY)
+BOARD_DEFINES += DeviceFamily_$(DEVICE_FAMILY)
-DEFINES += DEVICE_LINE_$(DEVICE_LINE)
+BOARD_DEFINES += DEVICE_LINE_$(DEVICE_LINE)
-DEFINES += DEVICE_$(DEVICE)
+BOARD_DEFINES += DEVICE_$(DEVICE)
-DEFINES += $(BOARD_TYPE)
+BOARD_DEFINES += $(BOARD_TYPE)
-DEFINES += SUPPORTS_PROP_MODE=$(SUPPORTS_PROP_MODE)
+BOARD_DEFINES += SUPPORTS_PROP_MODE=$(SUPPORTS_PROP_MODE)
-DEFINES += SUPPORTS_IEEE_MODE=$(SUPPORTS_IEEE_MODE)
+BOARD_DEFINES += SUPPORTS_IEEE_MODE=$(SUPPORTS_IEEE_MODE)
-DEFINES += SUPPORTS_BLE_BEACON=$(SUPPORTS_BLE_BEACON)
+BOARD_DEFINES += SUPPORTS_BLE_BEACON=$(SUPPORTS_BLE_BEACON)
-DEFINES += SUPPORTS_HIGH_PA=$(SUPPORTS_HIGH_PA)
+BOARD_DEFINES += SUPPORTS_HIGH_PA=$(SUPPORTS_HIGH_PA)
 
 # If the user-specified a Node ID, pass a define
 ifdef NODEID
-  DEFINES += IEEE_ADDR_NODE_ID=$(NODEID)
+  BOARD_DEFINES += IEEE_ADDR_NODE_ID=$(NODEID)
 endif
 
+CFLAGS += $(addprefix -D, $(BOARD_DEFINES))
+
 CONTIKI_TARGET_SOURCEFILES += platform.c
 CONTIKI_TARGET_SOURCEFILES += batmon-sensor.c
 CONTIKI_TARGET_SOURCEFILES += $(BOARD_SOURCEFILES)

examples/dev/gpio-hal/simplelink/pins.c

@@ -0,0 +1,43 @@
+/*
+ * Copyright (c) 2015-2018, Texas Instruments Incorporated
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * *  Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *
+ * *  Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * *  Neither the name of Texas Instruments Incorporated nor the names of
+ *    its contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+ * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/*---------------------------------------------------------------------------*/
+#include "contiki.h"
+#include "dev/gpio-hal.h"
+/*---------------------------------------------------------------------------*/
+#include <Board.h>
+/*---------------------------------------------------------------------------*/
+gpio_hal_pin_t out_pin1 = Board_PIN_LED0;
+gpio_hal_pin_t out_pin2 = Board_PIN_LED1;
+gpio_hal_pin_t out_pin3 = Board_PIN_LED2;
+/*---------------------------------------------------------------------------*/
+gpio_hal_pin_t btn_pin = Board_PIN_BTN1;
+/*---------------------------------------------------------------------------*/

tests/02-compile-arm-ports-01/Makefile

@@ -35,6 +35,40 @@ dev/leds/srf06-cc26xx:BOARD=launchpad/cc2650 \
 mqtt-client/srf06-cc26xx:BOARD=srf06/cc26xx \
 mqtt-client/srf06-cc26xx:BOARD=launchpad/cc2650 \
 mqtt-client/srf06-cc26xx:BOARD=sensortag/cc2650 \
+hello-world/simplelink:BOARD=launchpad/cc26x2r1 \
+hello-world/simplelink:BOARD=sensortag/cc2650 \
+nullnet/simplelink:BOARD=sensortag/cc2650 \
+rpl-border-router/simplelink:BOARD=launchpad/cc26x2r1 \
+sensniff/simplelink:BOARD=launchpad/cc26x2r1 \
+dev/gpio-hal/simplelink:BOARD=launchpad/cc1310 \
+dev/gpio-hal/simplelink:BOARD=launchpad/cc1312r1 \
+dev/gpio-hal/simplelink:BOARD=launchpad/cc1350 \
+dev/gpio-hal/simplelink:BOARD=launchpad/cc1350-4 \
+dev/gpio-hal/simplelink:BOARD=launchpad/cc1352p1 \
+dev/gpio-hal/simplelink:BOARD=launchpad/cc1352p-2 \
+dev/gpio-hal/simplelink:BOARD=launchpad/cc1352p-4 \
+dev/gpio-hal/simplelink:BOARD=launchpad/cc1352r1 \
+dev/gpio-hal/simplelink:BOARD=launchpad/cc26x2r1 \
+dev/gpio-hal/simplelink:BOARD=sensortag/cc1350 \
+dev/gpio-hal/simplelink:BOARD=sensortag/cc2650 \
+dev/gpio-hal/simplelink:BOARD=srf06/cc13x0 \
+dev/gpio-hal/simplelink:BOARD=srf06/cc26x0 \
+dev/leds/simplelink:BOARD=launchpad/cc1310 \
+dev/leds/simplelink:BOARD=launchpad/cc1312r1 \
+dev/leds/simplelink:BOARD=launchpad/cc1350 \
+dev/leds/simplelink:BOARD=launchpad/cc1350-4 \
+dev/leds/simplelink:BOARD=launchpad/cc1352p1 \
+dev/leds/simplelink:BOARD=launchpad/cc1352p-2 \
+dev/leds/simplelink:BOARD=launchpad/cc1352p-4 \
+dev/leds/simplelink:BOARD=launchpad/cc1352r1 \
+dev/leds/simplelink:BOARD=launchpad/cc26x2r1 \
+dev/leds/simplelink:BOARD=sensortag/cc1350 \
+dev/leds/simplelink:BOARD=sensortag/cc2650 \
+dev/leds/simplelink:BOARD=srf06/cc13x0 \
+dev/leds/simplelink:BOARD=srf06/cc26x0 \
+mqtt-client/simplelink:BOARD=launchpad/cc26x2r1 \
+mqtt-client/simplelink:BOARD=sensortag/cc2650:DEFINES=BOARD_CONF_SENSORS_DISABLE=1,TI_SPI_CONF_ENABLE=0 \
+mqtt-client/simplelink:BOARD=srf06/cc26x0:DEFINES=BOARD_CONF_SENSORS_DISABLE=1,TI_SPI_CONF_ENABLE=0 \
 mqtt-client/cc2538dk \
 storage/cfs-coffee/cc2538dk \
 sensniff/cc2538dk \

tests/compile-all/build.sh

@@ -101,6 +101,10 @@ do
     then
         # srf06-cc26xx has multiple boards
         BOARDS="srf06/cc26xx srf06/cc13xx launchpad/cc2650 launchpad/cc1350 sensortag/cc2650 sensortag/cc1350"
+    elif [[ "$platform" == "simplelink" ]]
+    then
+        # SimpleLink has multiple boards
+        BOARDS="launchpad/cc1310 launchpad/cc1312r1 launchpad/cc1350 launchpad/cc1350-4 launchpad/cc1352p-2 launchpad/cc1352p-4 launchpad/cc1352p1 launchpad/cc1352r1 launchpad/cc2650 launchpad/cc26x2r1 sensortag/cc1350 sensortag/cc2650 srf06/cc13x0 srf06/cc26x0"
     elif [[ "$platform" == "zoul" ]]
     then
         # Zoul has multiple boards