diff --git a/examples/lwm2m-ipso-objects/README.md b/examples/lwm2m-ipso-objects/README.md
index e9be82dcb..30cc5832f 100644
--- a/examples/lwm2m-ipso-objects/README.md
+++ b/examples/lwm2m-ipso-objects/README.md
@@ -1,48 +1,10 @@
-IPSO Objects Example
+LWM2M with IPSO Objects Example
 ============================================
 
-This is an example of how to make use of the IPSO Object and LWM2M
-implementation in Contiki.
-
-The LWM2M implementation is based on the Erbium CoAP implementation
-and consists of two apps: lwm2m-engine and ipso-objects. The
-lwm2m-engine handle the specifics of LWM2M including bootstrapping and
-how read/writes of objects and resources are handled. The ipso-objects
-contains implementations of some of the IPSO Smart Objects.
-
-The implementation was used during the IPSO Interop in May 2015,
-Kista, Sweden, and was successfully tested with other
-implementations.
-
-The examples use some of the basic IPSO object for controlling LEDs on
-Contiki devices and for reading out temperature.
-
-##Testing IPSO-objects with Leshan
-
-First program a device with the examples/ipso-objects/example-ipso-objects.c
-
-```bash
->make example-ipso-objects.upload TARGET=zoul
->...
-```
-
-After that start up a native-border router or other border router on fd00::1/64
-or another prefix - NOTE: if you use another prefix you will need to change LWM2M_SERVER_ADDRESS for which the device will register - in project-conf.h:
-```
-#define LWM2M_SERVER_ADDRESS "fd00::1"
-```
-
-Then when everything is setup you can download a Leshan and use that to
-test controlling LEDs of the device.
-
-###Starting Leshan
-```bash
-wget https://hudson.eclipse.org/leshan/job/leshan/lastSuccessfulBuild/artifact/leshan-standalone.jar
-java -jar ./leshan-standalone.jar
-```
-Browse to leshans device page with http://127.0.0.1:8080 .
-
-When you have started the border-router and also Leshan you should now
-start (or reboot) your IPSO Object enabled device. Within 30 seconds
-you should be able to see it on the Leshan device page.
+This is an OMA LWM2M example implementing IPSO Objects.
+It can connect to a Leshan server out-of-the-box.
+Important configuration paramters:
+* `LWM2M_SERVER_ADDRESS`: the address of the server to register to (or bosstrap from)
+* `REGISTER_WITH_LWM2M_BOOTSTRAP_SERVER`: set to bootstrap via `LWM2M_SERVER_ADDRESS` and then obtain the registration server address
 
+A tutorial for setting up this example is provided on the wiki.