Added a quick sht11 sensor driver support for Z1

Support for Sensirion SHT1x/SHT7x support is adapted from core for Z1 in the Ziglet port.
XXX TODO:
 + Remove SHT11_PWR
 + Lines are shared with I2C, hence port reconfiguration must be added at the driver level.
This commit is contained in:
Enric M. Calvo 2011-02-26 12:41:56 +01:00
parent d971578f1e
commit 9acdb98a56
4 changed files with 131 additions and 2 deletions

View File

@ -2,8 +2,8 @@ ifndef TARGET
TARGET=z1
endif
CONTIKI_PROJECT = test-phidgets blink test-adxl345 tmp102-test test-battery #test-potent
CONTIKI_SOURCEFILES += cc2420-arch.c
CONTIKI_PROJECT = test-phidgets blink test-adxl345 tmp102-test test-battery test-sht11 #test-potent
CONTIKI_SOURCEFILES += cc2420-arch.c sensors.c sht11.c
PROJECT_SOURCEFILES = i2cmaster.c tmp102.c adxl345.c battery-sensor.c sky-sensors.c #potentiometer-sensor.c
APPS=serial-shell

View File

@ -1 +1,2 @@
+ clean-up test-battery.c
+ sht11 drier compat. with i2c

68
examples/z1/test-sht11.c Normal file
View File

@ -0,0 +1,68 @@
/*
* Copyright (c) 2011, Zolertia(TM) is a trademark of Advancare,SL
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the Contiki operating system.
*
* $Id: test-sht11.c,v 1.3 2011/02/27 07:39:55 enricmcalvo $
*/
/**
* \file
* Testing the SHT11 sensor on the Zolertia Z1 Platform.
* \author
* Nicolas Tsiftes <nvt@sics.se>
* Enric M. Calvo <ecalvo@zolertia.com>
*/
#include "contiki.h"
#include "dev/sht11.h"
#include <stdio.h>
PROCESS(test_sht11_process, "SHT11 test");
AUTOSTART_PROCESSES(&test_sht11_process);
PROCESS_THREAD(test_sht11_process, ev, data)
{
static struct etimer et;
static unsigned rh;
PROCESS_BEGIN();
sht11_init();
for (etimer_set(&et, CLOCK_SECOND);; etimer_reset(&et)) {
PROCESS_YIELD();
printf("Temperature: %u degrees Celsius\n",
(unsigned) (-39.60 + 0.01 * sht11_temp()));
rh = sht11_humidity();
printf("Rel. humidity: %u%%\n",
(unsigned) (-4 + 0.0405*rh - 2.8e-6*(rh*rh)));
}
PROCESS_END();
}

View File

@ -0,0 +1,60 @@
/*
* Copyright (c) 2011, Zolertia(TM) is a trademark of Advancare,SL
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the Contiki operating system.
*
*/
/**
* \file
* Architecture-specific definitions for the SHT11 sensor on Zolertia Z1
* when connected to the Ziglet port.
* \author
* Enric M. Calvo <ecalvo@zolertia.com>, adapted from work by
* Nicolas Tsiftes <nvt@sics.se>
*/
#ifndef SHT11_ARCH_H
#define SHT11_ARCH_H
// Architecture-specific definitions for the SHT11 sensor on Zolertia Z1
// when connected to the Ziglet port.
// CAUTION: I2C needs to be disabled to use the bitbang protocol of SHT11
#define SHT11_ARCH_SDA 1 /* P5.1 */
#define SHT11_ARCH_SCL 2 /* P5.2 */
// SHT11_ARCH_PWR is not needed, but until and *-arch abstraction exists, this
// should fix it
#define SHT11_ARCH_PWR 3 /* P5.3 -- unused pin */
#define SHT11_PxDIR P5DIR
#define SHT11_PxIN P5IN
#define SHT11_PxOUT P5OUT
#define SHT11_PxSEL P5SEL
#endif