giomba
/
nes-proj
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Merge pull request #829 from tiepettersen/contrib/simplelink-ble-issue 

Fixed BLE advertisement on SimpleLink
This commit is contained in:
George Oikonomou 2019-01-28 22:24:11 +00:00 committed by GitHub
parent 17f4c68888 ff93ef11db
commit a66692de45
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
64 changed files with 1737 additions and 412 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

26
arch/cpu/simplelink-cc13xx-cc26xx/cc13xx-cc26xx-conf.h
View File

@ -133,6 +133,32 @@
#define RF_MODE RF_CONF_MODE
#endif /* RF_CONF_MODE */
/* Sub-1 GHz path front-end mode configuration */
#ifdef RF_SUB_1_GHZ_CONF_FRONT_END_MODE
#define RF_SUB_1_GHZ_FRONT_END_MODE RF_SUB_1_GHZ_CONF_FRONT_END_MODE
#else
#define RF_SUB_1_GHZ_FRONT_END_MODE RF_FRONT_END_MODE_DIFFERENTIAL
#endif
#ifdef RF_SUB_1_GHZ_CONF_BIAS_MODE
#define RF_SUB_1_GHZ_BIAS_MODE RF_SUB_1_GHZ_CONF_BIAS_MODE
#else
#define RF_SUB_1_GHZ_BIAS_MODE RF_BIAS_MODE_INTERNAL
#endif
/* 2.4 GHz path front-end mode configuration */
#ifdef RF_2_4_GHZ_CONF_FRONT_END_MODE
#define RF_2_4_GHZ_FRONT_END_MODE RF_2_4_GHZ_CONF_FRONT_END_MODE
#else
#define RF_2_4_GHZ_FRONT_END_MODE RF_FRONT_END_MODE_DIFFERENTIAL
#endif
#ifdef RF_2_4_GHZ_CONF_BIAS_MODE
#define RF_2_4_GHZ_BIAS_MODE RF_2_4_GHZ_CONF_BIAS_MODE
#else
#define RF_2_4_GHZ_BIAS_MODE RF_BIAS_MODE_INTERNAL
#endif
/* Number of RX buffers. */
#ifndef RF_CONF_RX_BUF_CNT
#define RF_CONF_RX_BUF_CNT 4

58
arch/cpu/simplelink-cc13xx-cc26xx/rf-settings/cc13x0/ble-settings.c
View File

@ -56,12 +56,18 @@
/* TI-RTOS RF Mode Object */
RF_Mode rf_ble_mode =
{
.rfMode = RF_MODE_BLE,
.rfMode = RF_MODE_MULTIPLE,
.cpePatchFxn = &rf_patch_cpe_ble,
.mcePatchFxn = 0,
.rfePatchFxn = &rf_patch_rfe_ble,
};
/*---------------------------------------------------------------------------*/
/*
* CMD_RADIO_SETUP must be configured with default TX power value
* in the .txPower field.
*/
#define DEFAULT_TX_POWER 0x5F3C /* 5 dBm */
/*---------------------------------------------------------------------------*/
/* Overrides for CMD_RADIO_SETUP */
uint32_t rf_ble_overrides[] CC_ALIGN(4) =
{
@ -109,46 +115,14 @@ rfc_CMD_RADIO_SETUP_t rf_ble_cmd_radio_setup =
.condition.nSkip = 0x0,
.mode = 0x00,
.loDivider = 0x00,
.config.frontEndMode = 0x0,
.config.biasMode = 0x0,
.config.frontEndMode = 0x0, /* set by driver */
.config.biasMode = 0x0, /* set by driver */
.config.analogCfgMode = 0x0,
.config.bNoFsPowerUp = 0x0,
.txPower = 0x3D3F,
.txPower = DEFAULT_TX_POWER,
.pRegOverride = rf_ble_overrides,
};
/*---------------------------------------------------------------------------*/
/* Structure for CMD_BLE_ADV_NC.pParams */
rfc_bleAdvPar_t rf_ble_adv_par =
{
.pRxQ = 0,
.rxConfig.bAutoFlushIgnored = 0x0,
.rxConfig.bAutoFlushCrcErr = 0x0,
.rxConfig.bAutoFlushEmpty = 0x0,
.rxConfig.bIncludeLenByte = 0x0,
.rxConfig.bIncludeCrc = 0x0,
.rxConfig.bAppendRssi = 0x0,
.rxConfig.bAppendStatus = 0x0,
.rxConfig.bAppendTimestamp = 0x0,
.advConfig.advFilterPolicy = 0x0,
.advConfig.deviceAddrType = 0x0,
.advConfig.peerAddrType = 0x0,
.advConfig.bStrictLenFilter = 0x0,
.advConfig.rpaMode = 0x0,
.advLen = 0x18,
.scanRspLen = 0x00,
.pAdvData = 0,
.pScanRspData = 0,
.pDeviceAddress = 0,
.pWhiteList = 0,
.__dummy0 = 0x0000,
.__dummy1 = 0x00,
.endTrigger.triggerType = TRIG_NEVER,
.endTrigger.bEnaCmd = 0x0,
.endTrigger.triggerNo = 0x0,
.endTrigger.pastTrig = 0x0,
.endTime = 0x00000000,
};
/*---------------------------------------------------------------------------*/
/* CMD_BLE_ADV_NC: BLE Non-Connectable Advertiser Command */
rfc_CMD_BLE_ADV_NC_t rf_ble_cmd_ble_adv_nc =
{
@ -159,13 +133,13 @@ rfc_CMD_BLE_ADV_NC_t rf_ble_cmd_ble_adv_nc =
.startTrigger.triggerType = TRIG_NOW,
.startTrigger.bEnaCmd = 0x0,
.startTrigger.triggerNo = 0x0,
.startTrigger.pastTrig = 0x0,
.condition.rule = COND_NEVER,
.startTrigger.pastTrig = 0x1,
.condition.rule = 0x0, /* set by driver */
.condition.nSkip = 0x0,
.channel = 0x8C,
.whitening.init = 0x51,
.channel = 0x00, /* set by driver */
.whitening.init = 0x00, /* set by driver */
.whitening.bOverride = 0x1,
.pParams = &rf_ble_adv_par,
.pOutput = 0,
.pParams = 0x00000000, /* set by driver */
.pOutput = 0x00000000, /* set by driver */
};
/*---------------------------------------------------------------------------*/

1
arch/cpu/simplelink-cc13xx-cc26xx/rf-settings/cc13x0/ble-settings.h
View File

@ -43,7 +43,6 @@ extern RF_Mode rf_ble_mode;
/*---------------------------------------------------------------------------*/
/* RF Core API commands */
extern rfc_CMD_RADIO_SETUP_t rf_ble_cmd_radio_setup;
extern rfc_bleAdvPar_t rf_ble_adv_par;
extern rfc_CMD_BLE_ADV_NC_t rf_ble_cmd_ble_adv_nc;
/*---------------------------------------------------------------------------*/
/* RF Core API Overrides */

6
arch/cpu/simplelink-cc13xx-cc26xx/rf-settings/cc13x0/ieee-settings.c
View File

@ -57,7 +57,7 @@
/* TI-RTOS RF Mode Object */
RF_Mode rf_ieee_mode =
{
.rfMode = RF_MODE_IEEE_15_4,
.rfMode = RF_MODE_MULTIPLE,
.cpePatchFxn = 0,
.mcePatchFxn = 0,
.rfePatchFxn = 0,
@ -110,8 +110,8 @@ rfc_CMD_RADIO_SETUP_t rf_cmd_ieee_radio_setup =
.condition.rule = COND_NEVER,
.condition.nSkip = 0x0,
.mode = 0x01,
.config.frontEndMode = 0x0,
.config.biasMode = 0x0,
.config.frontEndMode = 0x0, /* set by driver */
.config.biasMode = 0x0, /* set by driver */
.config.analogCfgMode = 0x0,
.config.bNoFsPowerUp = 0x0,
.txPower = DEFAULT_TX_POWER, /* 5 dBm default */

2
arch/cpu/simplelink-cc13xx-cc26xx/rf-settings/cc13x0/prop-settings.c
View File

@ -68,7 +68,7 @@
/* TI-RTOS RF Mode Object */
RF_Mode rf_prop_mode =
{
.rfMode = RF_MODE_PROPRIETARY_SUB_1,
.rfMode = RF_MODE_MULTIPLE,
.cpePatchFxn = &rf_patch_cpe_genfsk,
.mcePatchFxn = 0,
.rfePatchFxn = &rf_patch_rfe_genfsk,

68
arch/cpu/simplelink-cc13xx-cc26xx/rf-settings/cc13x2/ble-settings.c
View File

@ -47,7 +47,7 @@
#include DeviceFamily_constructPath(driverlib/rf_mailbox.h)
#include DeviceFamily_constructPath(driverlib/rf_common_cmd.h)
#include DeviceFamily_constructPath(driverlib/rf_ble_cmd.h)
#include DeviceFamily_constructPath(rf_patches/rf_patch_cpe_bt5.h)
#include DeviceFamily_constructPath(rf_patches/rf_patch_cpe_multi_protocol.h)
#include DeviceFamily_constructPath(rf_patches/rf_patch_rfe_bt5.h)
#include DeviceFamily_constructPath(rf_patches/rf_patch_mce_bt5.h)
@ -59,11 +59,17 @@
RF_Mode rf_ble_mode =
{
.rfMode = RF_MODE_AUTO,
.cpePatchFxn = &rf_patch_cpe_bt5,
.cpePatchFxn = &rf_patch_cpe_multi_protocol,
.mcePatchFxn = &rf_patch_mce_bt5,
.rfePatchFxn = &rf_patch_rfe_bt5,
};
/*---------------------------------------------------------------------------*/
/*
* CMD_RADIO_SETUP must be configured with default TX power value
* in the .txPower field.
*/
#define DEFAULT_TX_POWER 0x941E /* 5 dBm */
/*---------------------------------------------------------------------------*/
/* Overrides for CMD_BLE5_RADIO_SETUP */
uint32_t rf_ble_overrides_common[] CC_ALIGN(4) =
{
@ -137,71 +143,39 @@ rfc_CMD_BLE5_RADIO_SETUP_t rf_ble_cmd_radio_setup =
.defaultPhy.mainMode = 0x0,
.defaultPhy.coding = 0x0,
.loDivider = 0x00,
.config.frontEndMode = 0x0,
.config.biasMode = 0x0,
.config.frontEndMode = 0x0, /* set by driver */
.config.biasMode = 0x0, /* set by driver */
.config.analogCfgMode = 0x0,
.config.bNoFsPowerUp = 0x0,
.txPower = 0x941E,
.txPower = DEFAULT_TX_POWER,
.pRegOverrideCommon = rf_ble_overrides_common,
.pRegOverride1Mbps = rf_ble_overrides_1mbps,
.pRegOverride2Mbps = rf_ble_overrides_2mbps,
.pRegOverrideCoded = rf_ble_overrides_coded,
};
/*---------------------------------------------------------------------------*/
/* Structure for CMD_BLE5_ADV_NC.pParams */
rfc_bleAdvPar_t rf_ble_adv_par =
{
.pRxQ = 0,
.rxConfig.bAutoFlushIgnored = 0x0,
.rxConfig.bAutoFlushCrcErr = 0x0,
.rxConfig.bAutoFlushEmpty = 0x0,
.rxConfig.bIncludeLenByte = 0x0,
.rxConfig.bIncludeCrc = 0x0,
.rxConfig.bAppendRssi = 0x0,
.rxConfig.bAppendStatus = 0x0,
.rxConfig.bAppendTimestamp = 0x0,
.advConfig.advFilterPolicy = 0x0,
.advConfig.deviceAddrType = 0x0,
.advConfig.peerAddrType = 0x0,
.advConfig.bStrictLenFilter = 0x0,
.advConfig.rpaMode = 0x0,
.advLen = 0x18,
.scanRspLen = 0x00,
.pAdvData = 0,
.pScanRspData = 0,
.pDeviceAddress = 0,
.pWhiteList = 0,
.__dummy0 = 0x0000,
.__dummy1 = 0x00,
.endTrigger.triggerType = TRIG_NEVER,
.endTrigger.bEnaCmd = 0x0,
.endTrigger.triggerNo = 0x0,
.endTrigger.pastTrig = 0x0,
.endTime = 0x00000000,
};
/*---------------------------------------------------------------------------*/
/* CMD_BLE5_ADV_NC: Bluetooth 5 Non-Connectable Advertiser Command */
rfc_CMD_BLE5_ADV_NC_t rf_ble_cmd_ble_adv_nc =
{
.commandNo = 0x182D,
.status = 0x0000,
.pNextOp = 0, // INSERT APPLICABLE POINTER: (uint8_t*)&xxx
.commandNo = CMD_BLE5_ADV_NC,
.status = IDLE,
.pNextOp = 0,
.startTime = 0x00000000,
.startTrigger.triggerType = 0x0,
.startTrigger.triggerType = TRIG_NOW,
.startTrigger.bEnaCmd = 0x0,
.startTrigger.triggerNo = 0x0,
.startTrigger.pastTrig = 0x0,
.condition.rule = 0x1,
.startTrigger.pastTrig = 0x1,
.condition.rule = 0x0, /* set by driver */
.condition.nSkip = 0x0,
.channel = 0x8C,
.whitening.init = 0x51,
.channel = 0x00, /* set by driver */
.whitening.init = 0x00, /* set by driver */
.whitening.bOverride = 0x1,
.phyMode.mainMode = 0x0,
.phyMode.coding = 0x0,
.rangeDelay = 0x00,
.txPower = 0x0000,
.pParams = &rf_ble_adv_par,
.pOutput = 0, // INSERT APPLICABLE POINTER: (uint8_t*)&xxx
.pParams = 0x00000000, /* set by driver */
.pOutput = 0x00000000, /* set by driver */
.tx20Power = 0x00000000,
};
/*---------------------------------------------------------------------------*/

1
arch/cpu/simplelink-cc13xx-cc26xx/rf-settings/cc13x2/ble-settings.h
View File

@ -43,7 +43,6 @@ extern RF_Mode rf_ble_mode;
/*---------------------------------------------------------------------------*/
/* RF Core API commands */
extern rfc_CMD_BLE5_RADIO_SETUP_t rf_ble_cmd_radio_setup;
extern rfc_bleAdvPar_t rf_ble_adv_par;
extern rfc_CMD_BLE5_ADV_NC_t rf_ble_cmd_ble_adv_nc;
/*---------------------------------------------------------------------------*/
/* RF Core API Overrides */

8
arch/cpu/simplelink-cc13xx-cc26xx/rf-settings/cc13x2/ieee-settings.c
View File

@ -51,7 +51,7 @@
#include DeviceFamily_constructPath(driverlib/rf_mailbox.h)
#include DeviceFamily_constructPath(driverlib/rf_common_cmd.h)
#include DeviceFamily_constructPath(driverlib/rf_ieee_cmd.h)
#include DeviceFamily_constructPath(rf_patches/rf_patch_cpe_ieee_802_15_4.h)
#include DeviceFamily_constructPath(rf_patches/rf_patch_cpe_multi_protocol.h)
#include DeviceFamily_constructPath(rf_patches/rf_patch_mce_ieee_802_15_4.h)
#include <ti/drivers/rf/RF.h>
@ -62,7 +62,7 @@
RF_Mode rf_ieee_mode =
{
.rfMode = RF_MODE_AUTO,
.cpePatchFxn = &rf_patch_cpe_ieee_802_15_4,
.cpePatchFxn = &rf_patch_cpe_multi_protocol,
.mcePatchFxn = &rf_patch_mce_ieee_802_15_4,
.rfePatchFxn = 0,
};
@ -180,8 +180,8 @@ rfc_CMD_RADIO_SETUP_t rf_cmd_ieee_radio_setup =
.condition.nSkip = 0x0,
.mode = 0x01,
.loDivider = 0x00,
.config.frontEndMode = 0x0,
.config.biasMode = 0x0,
.config.frontEndMode = 0x0, /* set by driver */
.config.biasMode = 0x0, /* set by driver */
.config.analogCfgMode = 0x0,
.config.bNoFsPowerUp = 0x0,
.txPower = DEFAULT_TX_POWER, /* 5 dBm default */

4
arch/cpu/simplelink-cc13xx-cc26xx/rf-settings/cc13x2/prop-settings.c
View File

@ -63,7 +63,7 @@
#include DeviceFamily_constructPath(driverlib/rf_mailbox.h)
#include DeviceFamily_constructPath(driverlib/rf_common_cmd.h)
#include DeviceFamily_constructPath(driverlib/rf_prop_cmd.h)
#include DeviceFamily_constructPath(rf_patches/rf_patch_cpe_prop.h)
#include DeviceFamily_constructPath(rf_patches/rf_patch_cpe_multi_protocol.h)
#include DeviceFamily_constructPath(rf_patches/rf_patch_rfe_genfsk.h)
#include DeviceFamily_constructPath(rf_patches/rf_patch_mce_genfsk.h)
@ -75,7 +75,7 @@
RF_Mode rf_prop_mode =
{
.rfMode = RF_MODE_AUTO,
.cpePatchFxn = &rf_patch_cpe_prop,
.cpePatchFxn = &rf_patch_cpe_multi_protocol,
.mcePatchFxn = &rf_patch_mce_genfsk,
.rfePatchFxn = &rf_patch_rfe_genfsk,
};

58
arch/cpu/simplelink-cc13xx-cc26xx/rf-settings/cc26x0/ble-settings.c
View File

@ -55,12 +55,18 @@
/* TI-RTOS RF Mode Object */
RF_Mode rf_ble_mode =
{
.rfMode = RF_MODE_BLE,
.rfMode = RF_MODE_MULTIPLE,
.cpePatchFxn = &rf_patch_cpe_ble,
.mcePatchFxn = 0,
.rfePatchFxn = &rf_patch_rfe_ble,
};
/*---------------------------------------------------------------------------*/
/*
* CMD_RADIO_SETUP must be configured with default TX power value
* in the .txPower field.
*/
#define DEFAULT_TX_POWER 0x9330 /* 5 dBm */
/*---------------------------------------------------------------------------*/
/* Overrides for CMD_RADIO_SETUP */
uint32_t rf_ble_overrides[] CC_ALIGN(4) =
{
@ -105,46 +111,14 @@ rfc_CMD_RADIO_SETUP_t rf_ble_cmd_radio_setup =
.condition.nSkip = 0x0,
.mode = 0x00,
.__dummy0 = 0x00,
.config.frontEndMode = 0x0,
.config.biasMode = 0x0,
.config.frontEndMode = 0x0, /* set by driver */
.config.biasMode = 0x0, /* set by driver */
.config.analogCfgMode = 0x0,
.config.bNoFsPowerUp = 0x0,
.txPower = 0x9330,
.txPower = DEFAULT_TX_POWER,
.pRegOverride = rf_ble_overrides,
};
/*---------------------------------------------------------------------------*/
/* Structure for CMD_BLE_ADV_NC.pParams */
rfc_bleAdvPar_t rf_ble_adv_par =
{
.pRxQ = 0,
.rxConfig.bAutoFlushIgnored = 0x0,
.rxConfig.bAutoFlushCrcErr = 0x0,
.rxConfig.bAutoFlushEmpty = 0x0,
.rxConfig.bIncludeLenByte = 0x0,
.rxConfig.bIncludeCrc = 0x0,
.rxConfig.bAppendRssi = 0x0,
.rxConfig.bAppendStatus = 0x0,
.rxConfig.bAppendTimestamp = 0x0,
.advConfig.advFilterPolicy = 0x0,
.advConfig.deviceAddrType = 0x0,
.advConfig.peerAddrType = 0x0,
.advConfig.bStrictLenFilter = 0x0,
.advConfig.rpaMode = 0x0,
.advLen = 0x18,
.scanRspLen = 0x00,
.pAdvData = 0,
.pScanRspData = 0,
.pDeviceAddress = 0,
.pWhiteList = 0,
.__dummy0 = 0x0000,
.__dummy1 = 0x00,
.endTrigger.triggerType = TRIG_NEVER,
.endTrigger.bEnaCmd = 0x0,
.endTrigger.triggerNo = 0x0,
.endTrigger.pastTrig = 0x0,
.endTime = 0x00000000,
};
/*---------------------------------------------------------------------------*/
/* CMD_BLE_ADV_NC: BLE Non-Connectable Advertiser Command */
rfc_CMD_BLE_ADV_NC_t rf_ble_cmd_ble_adv_nc =
{
@ -155,13 +129,13 @@ rfc_CMD_BLE_ADV_NC_t rf_ble_cmd_ble_adv_nc =
.startTrigger.triggerType = TRIG_NOW,
.startTrigger.bEnaCmd = 0x0,
.startTrigger.triggerNo = 0x0,
.startTrigger.pastTrig = 0x0,
.condition.rule = COND_NEVER,
.startTrigger.pastTrig = 0x1,
.condition.rule = 0x0, /* set by driver */
.condition.nSkip = 0x0,
.channel = 0x8C,
.whitening.init = 0x51,
.channel = 0x00, /* set by driver */
.whitening.init = 0x00, /* set by driver */
.whitening.bOverride = 0x1,
.pParams = &rf_ble_adv_par,
.pOutput = 0,
.pParams = 0x00000000, /* set by driver */
.pOutput = 0x00000000, /* set by driver */
};
/*---------------------------------------------------------------------------*/

1
arch/cpu/simplelink-cc13xx-cc26xx/rf-settings/cc26x0/ble-settings.h
View File

@ -43,7 +43,6 @@ extern RF_Mode rf_ble_mode;
/*---------------------------------------------------------------------------*/
/* RF Core API commands */
extern rfc_CMD_RADIO_SETUP_t rf_ble_cmd_radio_setup;
extern rfc_bleAdvPar_t rf_ble_adv_par;
extern rfc_CMD_BLE_ADV_NC_t rf_ble_cmd_ble_adv_nc;
/*---------------------------------------------------------------------------*/
/* RF Core API Overrides */

6
arch/cpu/simplelink-cc13xx-cc26xx/rf-settings/cc26x0/ieee-settings.c
View File

@ -53,7 +53,7 @@
/* TI-RTOS RF Mode Object */
RF_Mode rf_ieee_mode =
{
.rfMode = RF_MODE_IEEE_15_4,
.rfMode = RF_MODE_MULTIPLE,
.cpePatchFxn = &rf_patch_cpe_ieee,
.mcePatchFxn = 0,
.rfePatchFxn = 0,
@ -107,8 +107,8 @@ rfc_CMD_RADIO_SETUP_t rf_cmd_ieee_radio_setup =
.condition.nSkip = 0x0,
.mode = 0x01,
.__dummy0 = 0x00,
.config.frontEndMode = 0x0,
.config.biasMode = 0x0,
.config.frontEndMode = 0x0, /* set by driver */
.config.biasMode = 0x0, /* set by driver */
.config.analogCfgMode = 0x0,
.config.bNoFsPowerUp = 0x0,
.txPower = DEFAULT_TX_POWER, /* 5 dBm default */

68
arch/cpu/simplelink-cc13xx-cc26xx/rf-settings/cc26x2/ble-settings.c
View File

@ -46,7 +46,7 @@
#include DeviceFamily_constructPath(driverlib/rf_mailbox.h)
#include DeviceFamily_constructPath(driverlib/rf_common_cmd.h)
#include DeviceFamily_constructPath(driverlib/rf_ble_cmd.h)
#include DeviceFamily_constructPath(rf_patches/rf_patch_cpe_bt5.h)
#include DeviceFamily_constructPath(rf_patches/rf_patch_cpe_multi_protocol.h)
#include DeviceFamily_constructPath(rf_patches/rf_patch_rfe_bt5.h)
#include DeviceFamily_constructPath(rf_patches/rf_patch_mce_bt5.h)
@ -58,11 +58,17 @@
RF_Mode rf_ble_mode =
{
.rfMode = RF_MODE_AUTO,
.cpePatchFxn = &rf_patch_cpe_bt5,
.cpePatchFxn = &rf_patch_cpe_multi_protocol,
.mcePatchFxn = &rf_patch_mce_bt5,
.rfePatchFxn = &rf_patch_rfe_bt5,
};
/*---------------------------------------------------------------------------*/
/*
* CMD_RADIO_SETUP must be configured with default TX power value
* in the .txPower field.
*/
#define DEFAULT_TX_POWER 0x941E /* 5 dBm */
/*---------------------------------------------------------------------------*/
/* Overrides for CMD_BLE5_RADIO_SETUP */
uint32_t rf_ble_overrides_common[] CC_ALIGN(4) =
{
@ -137,71 +143,39 @@ rfc_CMD_BLE5_RADIO_SETUP_t rf_ble_cmd_radio_setup =
.defaultPhy.mainMode = 0x0,
.defaultPhy.coding = 0x0,
.loDivider = 0x00,
.config.frontEndMode = 0x0,
.config.biasMode = 0x0,
.config.frontEndMode = 0x0, /* set by driver */
.config.biasMode = 0x0, /* set by driver */
.config.analogCfgMode = 0x0,
.config.bNoFsPowerUp = 0x0,
.txPower = 0x941E,
.txPower = DEFAULT_TX_POWER,
.pRegOverrideCommon = rf_ble_overrides_common,
.pRegOverride1Mbps = rf_ble_overrides_1mbps,
.pRegOverride2Mbps = rf_ble_overrides_2mbps,
.pRegOverrideCoded = rf_ble_overrides_coded,
};
/*---------------------------------------------------------------------------*/
/* Structure for CMD_BLE5_ADV_NC.pParams */
rfc_bleAdvPar_t rf_ble_adv_par =
{
.pRxQ = 0,
.rxConfig.bAutoFlushIgnored = 0x0,
.rxConfig.bAutoFlushCrcErr = 0x0,
.rxConfig.bAutoFlushEmpty = 0x0,
.rxConfig.bIncludeLenByte = 0x0,
.rxConfig.bIncludeCrc = 0x0,
.rxConfig.bAppendRssi = 0x0,
.rxConfig.bAppendStatus = 0x0,
.rxConfig.bAppendTimestamp = 0x0,
.advConfig.advFilterPolicy = 0x0,
.advConfig.deviceAddrType = 0x0,
.advConfig.peerAddrType = 0x0,
.advConfig.bStrictLenFilter = 0x0,
.advConfig.rpaMode = 0x0,
.advLen = 0x18,
.scanRspLen = 0x00,
.pAdvData = 0,
.pScanRspData = 0,
.pDeviceAddress = 0,
.pWhiteList = 0,
.__dummy0 = 0x0000,
.__dummy1 = 0x00,
.endTrigger.triggerType = TRIG_NEVER,
.endTrigger.bEnaCmd = 0x0,
.endTrigger.triggerNo = 0x0,
.endTrigger.pastTrig = 0x0,
.endTime = 0x00000000,
};
/*---------------------------------------------------------------------------*/
/* CMD_BLE5_ADV_NC: Bluetooth 5 Non-Connectable Advertiser Command */
rfc_CMD_BLE5_ADV_NC_t rf_ble_cmd_ble_adv_nc =
{
.commandNo = 0x182D,
.status = 0x0000,
.pNextOp = 0, // INSERT APPLICABLE POINTER: (uint8_t*)&xxx
.commandNo = CMD_BLE5_ADV_NC,
.status = IDLE,
.pNextOp = 0,
.startTime = 0x00000000,
.startTrigger.triggerType = 0x0,
.startTrigger.triggerType = TRIG_NOW,
.startTrigger.bEnaCmd = 0x0,
.startTrigger.triggerNo = 0x0,
.startTrigger.pastTrig = 0x0,
.condition.rule = 0x1,
.startTrigger.pastTrig = 0x1,
.condition.rule = 0x0, /* set by driver */
.condition.nSkip = 0x0,
.channel = 0x8C,
.whitening.init = 0x51,
.channel = 0x00, /* set by driver */
.whitening.init = 0x00, /* set by driver */
.whitening.bOverride = 0x1,
.phyMode.mainMode = 0x0,
.phyMode.coding = 0x0,
.rangeDelay = 0x00,
.txPower = 0x0000,
.pParams = &rf_ble_adv_par,
.pOutput = 0, // INSERT APPLICABLE POINTER: (uint8_t*)&xxx
.pParams = 0x00000000, /* set by driver */
.pOutput = 0x00000000, /* set by driver */
.tx20Power = 0x00000000,
};
/*---------------------------------------------------------------------------*/

1
arch/cpu/simplelink-cc13xx-cc26xx/rf-settings/cc26x2/ble-settings.h
View File

@ -43,7 +43,6 @@ extern RF_Mode rf_ble_mode;
/*---------------------------------------------------------------------------*/
/* RF Core API commands */
extern rfc_CMD_BLE5_RADIO_SETUP_t rf_ble_cmd_radio_setup;
extern rfc_bleAdvPar_t rf_ble_adv_par;
extern rfc_CMD_BLE5_ADV_NC_t rf_ble_cmd_ble_adv_nc;
/*---------------------------------------------------------------------------*/
/* RF Core API Overrides */

8
arch/cpu/simplelink-cc13xx-cc26xx/rf-settings/cc26x2/ieee-settings.c
View File

@ -44,7 +44,7 @@
#include DeviceFamily_constructPath(driverlib/rf_mailbox.h)
#include DeviceFamily_constructPath(driverlib/rf_common_cmd.h)
#include DeviceFamily_constructPath(driverlib/rf_ieee_cmd.h)
#include DeviceFamily_constructPath(rf_patches/rf_patch_cpe_ieee_802_15_4.h)
#include DeviceFamily_constructPath(rf_patches/rf_patch_cpe_multi_protocol.h)
#include DeviceFamily_constructPath(rf_patches/rf_patch_mce_ieee_802_15_4.h)
#include <ti/drivers/rf/RF.h>
@ -55,7 +55,7 @@
RF_Mode rf_ieee_mode =
{
.rfMode = RF_MODE_AUTO,
.cpePatchFxn = &rf_patch_cpe_ieee_802_15_4,
.cpePatchFxn = &rf_patch_cpe_multi_protocol,
.mcePatchFxn = &rf_patch_mce_ieee_802_15_4,
.rfePatchFxn = 0,
};
@ -104,8 +104,8 @@ rfc_CMD_RADIO_SETUP_t rf_cmd_ieee_radio_setup =
.condition.nSkip = 0x0,
.mode = 0x01,
.loDivider = 0x00,
.config.frontEndMode = 0x0,
.config.biasMode = 0x0,
.config.frontEndMode = 0x0, /* set by driver */
.config.biasMode = 0x0, /* set by driver */
.config.analogCfgMode = 0x0,
.config.bNoFsPowerUp = 0x0,
.txPower = DEFAULT_TX_POWER,

21
arch/cpu/simplelink-cc13xx-cc26xx/rf/ble-addr.c
View File

@ -81,7 +81,7 @@ ble_addr_ptr(void)
}
/*---------------------------------------------------------------------------*/
int
ble_addr_cpy(uint8_t *dst)
ble_addr_be_cpy(uint8_t *dst)
{
if(!dst) {
return -1;
@ -102,6 +102,23 @@ ble_addr_cpy(uint8_t *dst)
}
/*---------------------------------------------------------------------------*/
int
ble_addr_le_cpy(uint8_t *dst)
{
if(!dst) {
return -1;
}
volatile const uint8_t *const ble_addr = ble_addr_ptr();
size_t i;
for(i = 0; i < BLE_ADDR_SIZE; i++) {
dst[i] = ble_addr[i];
}
return 0;
}
/*---------------------------------------------------------------------------*/
int
ble_addr_to_eui64(uint8_t *dst, uint8_t *src)
{
if(!dst || !src) {
@ -126,7 +143,7 @@ ble_addr_to_eui64_cpy(uint8_t *dst)
int res;
uint8_t ble_addr[BLE_ADDR_SIZE];
res = ble_addr_cpy(ble_addr);
res = ble_addr_le_cpy(ble_addr);
if(res) {
return -1;
}

17
arch/cpu/simplelink-cc13xx-cc26xx/rf/ble-addr.h
View File

@ -59,6 +59,7 @@ uint8_t *ble_addr_ptr(void);
/*---------------------------------------------------------------------------*/
/**
* \brief Copy the node's factory BLE address to a destination memory area
* in big-endian (be) order.
* \param dst A pointer to the destination area where the BLE address is to be
* written
* \return 0 : Returned successfully
@ -68,7 +69,21 @@ uint8_t *ble_addr_ptr(void);
* the process. The factory address on devices is normally little-endian,
* therefore you should expect dst to store the address in a big-endian order.
*/
int ble_addr_cpy(uint8_t *dst);
int ble_addr_be_cpy(uint8_t *dst);
/*---------------------------------------------------------------------------*/
/**
* \brief Copy the node's factory BLE address to a destination memory area
* in little-endian (le) order.
* \param dst A pointer to the destination area where the BLE address is to be
* written
* \return 0 : Returned successfully
* -1 : Returned with error
*
* This function will copy 6 bytes, but will **not** invert the byte order.
* This is usefull for the RF core which assumes the BLE MAC address in
* little-endian order.
*/
int ble_addr_le_cpy(uint8_t *dst);
/*---------------------------------------------------------------------------*/
/**
* \brief Copy the node's BLE address to a destination memory area and converts

163
arch/cpu/simplelink-cc13xx-cc26xx/rf/ble-beacond.c
View File

@ -52,6 +52,7 @@
#include <ti/drivers/rf/RF.h>
/*---------------------------------------------------------------------------*/
#include "rf/rf.h"
#include "rf/sched.h"
#include "rf/ble-addr.h"
#include "rf/ble-beacond.h"
@ -70,32 +71,58 @@
/*---------------------------------------------------------------------------*/
#if RF_CONF_BLE_BEACON_ENABLE
/*---------------------------------------------------------------------------*/
/* BLE Advertisement channels. Not to be changed by the user. */
typedef enum {
BLE_ADV_CHANNEL_37 = (1 << 0),
BLE_ADV_CHANNEL_38 = (1 << 1),
BLE_ADV_CHANNEL_39 = (1 << 2),
BLE_ADV_CHANNEL_ALL = (BLE_ADV_CHANNEL_37 |
BLE_ADV_CHANNEL_38 |
BLE_ADV_CHANNEL_39),
} ble_adv_channel_t;
#define BLE_ADV_CHANNEL_MIN 37
#define BLE_ADV_CHANNEL_MAX 39
/*---------------------------------------------------------------------------*/
/* Maximum BLE advertisement size. Not to be changed by the user. */
#define BLE_ADV_MAX_SIZE 31
/*---------------------------------------------------------------------------*/
/* BLE Intervals: Send a burst of advertisements every BLE_ADV_INTERVAL secs */
#define BLE_ADV_INTERVAL (CLOCK_SECOND * 5)
#define BLE_ADV_DUTY_CYCLE (CLOCK_SECOND / 10)
#define BLE_ADV_MESSAGES 10
/*
* BLE Intervals: Send a burst of advertisements every BLE_ADV_INTERVAL
* specified in milliseconds.
*/
#define BLE_ADV_INTERVAL ((100 * CLOCK_SECOND) / 1000)
/* GAP Advertisement data types */
#define BLE_ADV_TYPE_FLAGS 0x01
#define BLE_ADV_TYPE_16BIT_MORE 0x02
#define BLE_ADV_TYPE_16BIT_COMPLETE 0x03
#define BLE_ADV_TYPE_32BIT_MORE 0x04
#define BLE_ADV_TYPE_32BIT_COMPLETE 0x05
#define BLE_ADV_TYPE_128BIT_MORE 0x06
#define BLE_ADV_TYPE_128BIT_COMPLETE 0x07
#define BLE_ADV_TYPE_LOCAL_NAME_SHORT 0x08
#define BLE_ADV_TYPE_LOCAL_NAME_COMPLETE 0x09
#define BLE_ADV_TYPE_POWER_LEVEL 0x0A
#define BLE_ADV_TYPE_OOB_CLASS_OF_DEVICE 0x0D
#define BLE_ADV_TYPE_OOB_SIMPLE_PAIRING_HASHC 0x0E
#define BLE_ADV_TYPE_OOB_SIMPLE_PAIRING_RANDR 0x0F
#define BLE_ADV_TYPE_SM_TK 0x10
#define BLE_ADV_TYPE_SM_OOB_FLAG 0x11
#define BLE_ADV_TYPE_SLAVE_CONN_INTERVAL_RANGE 0x12
#define BLE_ADV_TYPE_SIGNED_DATA 0x13
#define BLE_ADV_TYPE_SERVICE_LIST_16BIT 0x14
#define BLE_ADV_TYPE_SERVICE_LIST_128BIT 0x15
#define BLE_ADV_TYPE_SERVICE_DATA 0x16
#define BLE_ADV_TYPE_PUBLIC_TARGET_ADDR 0x17
#define BLE_ADV_TYPE_RANDOM_TARGET_ADDR 0x18
#define BLE_ADV_TYPE_APPEARANCE 0x19
#define BLE_ADV_TYPE_ADV_INTERVAL 0x1A
#define BLE_ADV_TYPE_LE_BD_ADDR 0x1B
#define BLE_ADV_TYPE_LE_ROLE 0x1C
#define BLE_ADV_TYPE_SIMPLE_PAIRING_HASHC_256 0x1D
#define BLE_ADV_TYPE_SIMPLE_PAIRING_RANDR_256 0x1E
#define BLE_ADV_TYPE_SERVICE_DATA_32BIT 0x20
#define BLE_ADV_TYPE_SERVICE_DATA_128BIT 0x21
#define BLE_ADV_TYPE_3D_INFO_DATA 0x3D
#define BLE_ADV_TYPE_MANUFACTURER_SPECIFIC 0xFF
/* GAP Advertisement data type flags */
/* Discovery Mode: LE Limited Discoverable Mode */
#define BLE_ADV_TYPE_FLAGS_LIMITED 0x01
/* Discovery Mode: LE General Discoverable Mode */
#define BLE_ADV_TYPE_FLAGS_GENERAL 0x02
/* Discovery Mode: BR/EDR Not Supported */
#define BLE_ADV_TYPE_FLAGS_BREDR_NOT_SUPPORTED 0x04
/* BLE Advertisement-related macros */
#define BLE_ADV_TYPE_DEVINFO 0x01
#define BLE_ADV_TYPE_NAME 0x09
#define BLE_ADV_TYPE_MANUFACTURER 0xFF
#define BLE_ADV_NAME_BUF_LEN BLE_ADV_MAX_SIZE
#define BLE_ADV_PAYLOAD_BUF_LEN 64
#define BLE_UUID_SIZE 16
@ -117,6 +144,11 @@ typedef struct {
/* RF driver */
RF_Handle rf_handle;
/* BLE command specific structures. Common accross BLE and BLE5. */
uint8_t ble_mac_addr[6];
rfc_bleAdvPar_t ble_adv_par;
rfc_bleAdvOutput_t ble_adv_output;
} ble_beacond_t;
static ble_beacond_t ble_beacond;
@ -126,13 +158,13 @@ PROCESS(ble_beacond_process, "RF BLE Beacon Daemon Process");
rf_ble_beacond_result_t
rf_ble_beacond_init(void)
{
ble_adv_par.pDeviceAddress = (uint16_t *)ble_addr_ptr();
ble_cmd_radio_setup.config.frontEndMode = RF_2_4_GHZ_FRONT_END_MODE;
ble_cmd_radio_setup.config.biasMode = RF_2_4_GHZ_BIAS_MODE;
RF_Params rf_params;
RF_Params_init(&rf_params);
/* Should immediately turn off radio if possible */
rf_params.nInactivityTimeout = 0;
rf_params.nInactivityTimeout = RF_CONF_INACTIVITY_TIMEOUT;
ble_beacond.rf_handle = ble_open(&rf_params);
@ -140,6 +172,18 @@ rf_ble_beacond_init(void)
return RF_BLE_BEACOND_ERROR;
}
/*
* It is important that the contents of the BLE MAC address is copied into
* RAM, as the System CPU, and subsequently flash, goes idle when pending
* on an RF command. This causes pend to hang forever.
*/
ble_addr_le_cpy(ble_beacond.ble_mac_addr);
ble_beacond.ble_adv_par.pDeviceAddress = (uint16_t *)ble_beacond.ble_mac_addr;
ble_beacond.ble_adv_par.endTrigger.triggerType = TRIG_NEVER;
rf_ble_cmd_ble_adv_nc.pParams = &ble_beacond.ble_adv_par;
rf_ble_cmd_ble_adv_nc.pOutput = &ble_beacond.ble_adv_output;
return RF_BLE_BEACOND_OK;
}
/*---------------------------------------------------------------------------*/
@ -154,12 +198,14 @@ rf_ble_beacond_config(clock_time_t interval, const char *name)
ble_beacond.ble_adv_interval = interval;
res = RF_BLE_BEACOND_OK;
} else {
ble_beacond.ble_adv_interval = BLE_ADV_INTERVAL;
}
if(name != NULL) {
const size_t name_len = strlen(name);
if((name_len == 0) || (name_len >= BLE_ADV_NAME_BUF_LEN)) {
if((0 < name_len) && (name_len < BLE_ADV_NAME_BUF_LEN)) {
ble_beacond.adv_name_len = name_len;
memcpy(ble_beacond.adv_name, name, name_len);
@ -235,37 +281,9 @@ rf_ble_get_tx_power(void)
return dbm;
}
/*---------------------------------------------------------------------------*/
static rf_ble_beacond_result_t
ble_beacon_burst(uint8_t channels_bm, uint8_t *data, uint8_t len)
{
rf_result_t res;
uint8_t channel;
for(channel = BLE_ADV_CHANNEL_MIN; channel <= BLE_ADV_CHANNEL_MAX; ++channel) {
const uint8_t channel_bv = (1 << (channel - BLE_ADV_CHANNEL_MIN));
if((channel_bv & channels_bm) == 0) {
continue;
}
ble_adv_par.advLen = len;
ble_adv_par.pAdvData = data;
ble_cmd_beacon.channel = channel;
res = ble_sched_beacon(NULL, 0);
if(res != RF_RESULT_OK) {
return RF_BLE_BEACOND_ERROR;
}
}
return RF_BLE_BEACOND_OK;
}
/*---------------------------------------------------------------------------*/
PROCESS_THREAD(ble_beacond_process, ev, data)
{
static size_t i;
static size_t len;
size_t len;
PROCESS_BEGIN();
@ -278,30 +296,33 @@ PROCESS_THREAD(ble_beacond_process, ev, data)
PROCESS_EXIT();
}
/* Device info */
/* Set the adv payload each pass: The device name may have changed */
len = 0;
/* Device info */
ble_beacond.tx_buf[len++] = (uint8_t)0x02; /* 2 bytes */
ble_beacond.tx_buf[len++] = (uint8_t)BLE_ADV_TYPE_DEVINFO;
ble_beacond.tx_buf[len++] = (uint8_t)0x1A; /* LE general discoverable + BR/EDR */
ble_beacond.tx_buf[len++] = (uint8_t)ble_beacond.adv_name_len;
ble_beacond.tx_buf[len++] = (uint8_t)BLE_ADV_TYPE_NAME;
#define append_byte(x) ble_beacond.tx_buf[len++] = (uint8_t)((x))
/* 2 bytes */
append_byte(2);
append_byte(BLE_ADV_TYPE_FLAGS);
/* LE general discoverable + BR/EDR not supported */
append_byte(BLE_ADV_TYPE_FLAGS_GENERAL |
BLE_ADV_TYPE_FLAGS_BREDR_NOT_SUPPORTED);
/* 1 + len(name) bytes (excluding zero termination) */
append_byte(1 + ble_beacond.adv_name_len);
append_byte(BLE_ADV_TYPE_LOCAL_NAME_COMPLETE);
memcpy(ble_beacond.tx_buf + len, ble_beacond.adv_name, ble_beacond.adv_name_len);
len += ble_beacond.adv_name_len;
/*
* Send BLE_ADV_MESSAGES beacon bursts. Each burst on all three
* channels, with a BLE_ADV_DUTY_CYCLE interval between bursts
*/
ble_beacon_burst(BLE_ADV_CHANNEL_ALL, ble_beacond.tx_buf, len);
for(i = 1; i < BLE_ADV_MESSAGES; ++i) {
etimer_set(&ble_beacond.ble_adv_et, BLE_ADV_DUTY_CYCLE);
PROCESS_WAIT_EVENT_UNTIL(etimer_expired(&ble_beacond.ble_adv_et));
#undef append_byte
ble_beacon_burst(BLE_ADV_CHANNEL_ALL, ble_beacond.tx_buf, len);
}
/* Send advertisements on all three channels */
ble_beacond.ble_adv_par.advLen = len;
ble_beacond.ble_adv_par.pAdvData = ble_beacond.tx_buf;
ble_sched_beacons(BLE_ADV_CHANNEL_ALL);
}
PROCESS_END();
}

41
arch/cpu/simplelink-cc13xx-cc26xx/rf/ieee-mode.c
View File

@ -217,6 +217,9 @@ rat_overflow_cb(void *arg)
static void
init_rf_params(void)
{
cmd_radio_setup.config.frontEndMode = RF_2_4_GHZ_FRONT_END_MODE;
cmd_radio_setup.config.biasMode = RF_2_4_GHZ_BIAS_MODE;
data_queue_t *rx_q = data_queue_init(sizeof(lensz_t));
cmd_rx.pRxQ = rx_q;
@ -550,32 +553,42 @@ read(void *buf, unsigned short buf_len)
static rf_result_t
cca_request(cmd_cca_req_t *cmd_cca_req)
{
RF_Stat stat = RF_StatRadioInactiveError;
rf_result_t res;
bool stop_rx = false;
const bool rx_is_idle = !rx_is_active();
/* RX is required to be running in order to do a CCA request */
if(!rx_is_active()) {
/* If RX is not pending, i.e. soon to be running, schedule the RX command */
if(cmd_rx.status != PENDING) {
res = netstack_sched_rx(false);
if(res != RF_RESULT_OK) {
LOG_ERR("CCA request failed to schedule RX\n");
return res;
}
if(rx_is_idle) {
res = netstack_sched_rx(false);
if(res != RF_RESULT_OK) {
/* We only stop RX if we had to schedule it */
stop_rx = true;
}
/* Make sure RX is running before we continue, unless we timeout and fail */
RTIMER_BUSYWAIT_UNTIL(!rx_is_active(), TIMEOUT_ENTER_RX_WAIT);
if(!rx_is_active()) {
LOG_ERR("CCA request failed to turn on RX, RX status=0x%04X\n", cmd_rx.status);
return RF_RESULT_ERROR;
}
}
const rtimer_clock_t t0 = RTIMER_NOW();
while((cmd_rx.status != ACTIVE) &&
RTIMER_CLOCK_LT(RTIMER_NOW(), t0 + TIMEOUT_ENTER_RX_WAIT)) ;
/* Perform the CCA request */
stat = RF_runImmediateCmd(ieee_radio.rf_handle, (uint32_t *)&cmd_cca_req);
RF_Stat stat = RF_StatRadioInactiveError;
if(rx_is_active()) {
stat = RF_runImmediateCmd(ieee_radio.rf_handle, (uint32_t *)&cmd_cca_req);
}
if(rx_is_idle) {
if(stop_rx) {
netstack_stop_rx();
}
if(stat != RF_StatCmdDoneSuccess) {
LOG_ERR("CCA request failed, stat=0x%02X\n", stat);
LOG_ERR("CCA request command failed, stat=0x%02X\n", stat);
return RF_RESULT_ERROR;
}

41
arch/cpu/simplelink-cc13xx-cc26xx/rf/prop-mode.c
View File

@ -61,6 +61,7 @@
#include <ti/drivers/rf/RF.h>
/*---------------------------------------------------------------------------*/
/* Platform RF dev */
#include "rf/rf.h"
#include "rf/dot-15-4g.h"
#include "rf/sched.h"
#include "rf/data-queue.h"
@ -193,6 +194,8 @@ static int off(void);
static void
init_rf_params(void)
{
cmd_radio_setup.config.frontEndMode = RF_SUB_1_GHZ_FRONT_END_MODE;
cmd_radio_setup.config.biasMode = RF_SUB_1_GHZ_BIAS_MODE;
cmd_radio_setup.centerFreq = PROP_MODE_CENTER_FREQ;
cmd_radio_setup.loDivider = PROP_MODE_LO_DIVIDER;
@ -207,26 +210,36 @@ static int8_t
get_rssi(void)
{
rf_result_t res;
bool stop_rx = false;
int8_t rssi = RF_GET_RSSI_ERROR_VAL;
const bool rx_is_idle = !rx_is_active();
/* RX is required to be running in order to do a RSSI measurement */
if(!rx_is_active()) {
/* If RX is not pending, i.e. soon to be running, schedule the RX command */
if(cmd_rx.status != PENDING) {
res = netstack_sched_rx(false);
if(res != RF_RESULT_OK) {
LOG_ERR("RSSI measurement failed to schedule RX\n");
return res;
}
if(rx_is_idle) {
res = netstack_sched_rx(false);
if(res != RF_RESULT_OK) {
return RF_GET_RSSI_ERROR_VAL;
/* We only stop RX if we had to schedule it */
stop_rx = true;
}
/* Make sure RX is running before we continue, unless we timeout and fail */
RTIMER_BUSYWAIT_UNTIL(!rx_is_active(), TIMEOUT_ENTER_RX_WAIT);
if(!rx_is_active()) {
LOG_ERR("RSSI measurement failed to turn on RX, RX status=0x%04X\n", cmd_rx.status);
return RF_RESULT_ERROR;
}
}
const rtimer_clock_t t0 = RTIMER_NOW();
while((cmd_rx.status != ACTIVE) &&
RTIMER_CLOCK_LT(RTIMER_NOW(), t0 + TIMEOUT_ENTER_RX_WAIT)) ;
/* Perform the RSSI measurement */
rssi = RF_getRssi(prop_radio.rf_handle);
int8_t rssi = RF_GET_RSSI_ERROR_VAL;
if(rx_is_active()) {
rssi = RF_getRssi(prop_radio.rf_handle);
}
if(rx_is_idle) {
if(stop_rx) {
netstack_stop_rx();
}

31
arch/cpu/simplelink-cc13xx-cc26xx/rf/rf.h
View File

@ -60,6 +60,37 @@
RF_MODE_2_4_GHZ)
/** @} */
/*---------------------------------------------------------------------------*/
/**
* \name The different front-end modes the CC13xx/CC26xx devices support. The
* front-end mode can be configured independently of the bias mode. The
* two types of modes are as follows:
* - Differential: Both RF_P and RF_N are used as a differential RF
* interface.
* - Single ended: Either the RF_P pin or the RF_N pin is used as the
* RF path.
*
* @{
*/
/* Available front-end mode configurations */
#define RF_FRONT_END_MODE_DIFFERENTIAL 0
#define RF_FRONT_END_MODE_SINGLE_ENDED_RFP 1
#define RF_FRONT_END_MODE_SINGLE_ENDED_RFN 2
/** @} */
/*---------------------------------------------------------------------------*/
/**
* \name The different bias modes the CC13xx/CC26xx devices support. The
* bias mode can be configured independently of the front-end mode. The
* two different modes are as follows:
* - Internal bias: the LNA is biased by an internal bias.
* - External bias: the LNA is biased by an external bias.
*
* @{
*/
/* Available bias mode configurations */
#define RF_BIAS_MODE_INTERNAL 0
#define RF_BIAS_MODE_EXTERNAL 1
/** @} */
/*---------------------------------------------------------------------------*/
#endif /* RF_CORE_H_ */
/*---------------------------------------------------------------------------*/
/**

180
arch/cpu/simplelink-cc13xx-cc26xx/rf/sched.c
View File

@ -51,6 +51,7 @@
#include <ti/devices/DeviceFamily.h>
#include DeviceFamily_constructPath(driverlib/rf_common_cmd.h)
#include DeviceFamily_constructPath(driverlib/rf_mailbox.h)
#include DeviceFamily_constructPath(driverlib/rf_ble_mailbox.h)
#include <ti/drivers/rf/RF.h>
/*---------------------------------------------------------------------------*/
@ -68,8 +69,6 @@
#define LOG_MODULE "Radio"
#define LOG_LEVEL LOG_LEVEL_NONE
/*---------------------------------------------------------------------------*/
/* Configuration parameters */
/*---------------------------------------------------------------------------*/
#define CMD_FS_RETRIES 3
#define RF_EVENTS_CMD_DONE (RF_EventCmdDone | RF_EventLastCmdDone | \
@ -82,6 +81,13 @@
#define EVENTS_CMD_DONE(events) (((events) & RF_EVENTS_CMD_DONE) != 0)
/*---------------------------------------------------------------------------*/
/* BLE advertisement channel range (inclusive) */
#define BLE_ADV_CHANNEL_MIN 37
#define BLE_ADV_CHANNEL_MAX 39
/* Number of BLE advertisement channels */
#define NUM_BLE_ADV_CHANNELS (BLE_ADV_CHANNEL_MAX - BLE_ADV_CHANNEL_MIN + 1)
/*---------------------------------------------------------------------------*/
/* Synth re-calibration every 3 minutes */
#define SYNTH_RECAL_INTERVAL (CLOCK_SECOND * 60 * 3)
/* Set re-calibration interval with a jitter of 10 seconds */
@ -89,6 +95,12 @@
static struct etimer synth_recal_timer;
/*---------------------------------------------------------------------------*/
#if (DeviceFamily_PARENT == DeviceFamily_PARENT_CC13X0_CC26X0)
typedef rfc_CMD_BLE_ADV_NC_t ble_cmd_adv_nc_t;
#elif (DeviceFamily_PARENT == DeviceFamily_PARENT_CC13X2_CC26X2)
typedef rfc_CMD_BLE5_ADV_NC_t ble_cmd_adv_nc_t;
#endif
/*---------------------------------------------------------------------------*/
static RF_Object rf_netstack;
#if RF_CONF_BLE_BEACON_ENABLE
@ -479,45 +491,171 @@ ble_open(RF_Params *params)
#endif
}
/*---------------------------------------------------------------------------*/
#if RF_CONF_BLE_BEACON_ENABLE
static RF_Op *
init_ble_adv_array(ble_cmd_adv_nc_t *ble_adv_array, uint8_t bm_channel)
{
RF_Op *first_ble_adv = NULL;
ble_cmd_adv_nc_t *cmd_adv_37 = &ble_adv_array[0];
ble_cmd_adv_nc_t *cmd_adv_38 = &ble_adv_array[1];
ble_cmd_adv_nc_t *cmd_adv_39 = &ble_adv_array[2];
/* Setup channel 37 advertisement if enabled */
if(bm_channel & BLE_ADV_CHANNEL_37) {
/* Default configurations from ble_cmd_adv_nc */
memcpy(cmd_adv_37, &ble_cmd_adv_nc, sizeof(ble_cmd_adv_nc));
cmd_adv_37->channel = 37;
/* Magic number: initialization for whitener, specific for channel 37 */
cmd_adv_37->whitening.init = 0x65;
/*
* The next advertisement is chained depending on whether they are
* enbled or not. If both 38 and 39 are disabled, then there is no
* chaining.
*/
if(bm_channel & BLE_ADV_CHANNEL_38) {
cmd_adv_37->pNextOp = (RF_Op *)cmd_adv_38;
cmd_adv_37->condition.rule = COND_ALWAYS;
} else if(bm_channel & BLE_ADV_CHANNEL_39) {
cmd_adv_37->pNextOp = (RF_Op *)cmd_adv_39;
cmd_adv_37->condition.rule = COND_ALWAYS;
} else {
cmd_adv_37->pNextOp = NULL;
cmd_adv_37->condition.rule = COND_NEVER;
}
/* Channel 37 will always be first if enabled */
first_ble_adv = (RF_Op *)cmd_adv_37;
}
/* Setup channel 38 advertisement if enabled */
if(bm_channel & BLE_ADV_CHANNEL_38) {
memcpy(cmd_adv_38, &ble_cmd_adv_nc, sizeof(ble_cmd_adv_nc));
cmd_adv_38->channel = 38;
/* Magic number: initialization for whitener, specific for channel 38 */
cmd_adv_38->whitening.init = 0x66;
/*
* The next advertisement is chained depending on whether they are
* enbled or not. If 39 is disabled, then there is no chaining.
*/
if(bm_channel & BLE_ADV_CHANNEL_39) {
cmd_adv_38->pNextOp = (RF_Op *)cmd_adv_39;
cmd_adv_38->condition.rule = COND_ALWAYS;
} else {
cmd_adv_38->pNextOp = NULL;
cmd_adv_38->condition.rule = COND_NEVER;
}
/*
* Channel 38 is only first if the first_ble_adv pointer is not
* set by channel 37.
*/
if(first_ble_adv == NULL) {
first_ble_adv = (RF_Op *)cmd_adv_38;
}
}
/* Setup channel 39 advertisement if enabled */
if(bm_channel & BLE_ADV_CHANNEL_39) {
memcpy(cmd_adv_39, &ble_cmd_adv_nc, sizeof(ble_cmd_adv_nc));
cmd_adv_39->channel = 39;
/* Magic number: initialization for whitener, specific for channel 39 */
cmd_adv_39->whitening.init = 0x67;
/* Channel 39 is always the last advertisement in the chain */
cmd_adv_39->pNextOp = NULL;
cmd_adv_39->condition.rule = COND_NEVER;
/*
* Channel 39 is only first if the first_ble_adv pointer is not
* set by channel 37 or channel 38.
*/
if(first_ble_adv == NULL) {
first_ble_adv = (RF_Op *)cmd_adv_39;
}
}
return first_ble_adv;
}
#endif /* RF_CONF_BLE_BEACON_ENABLE */
/*---------------------------------------------------------------------------*/
rf_result_t
ble_sched_beacon(RF_Callback cb, RF_EventMask bm_event)
ble_sched_beacons(uint8_t bm_channel)
{
#if RF_CONF_BLE_BEACON_ENABLE
RF_ScheduleCmdParams sched_params;
RF_ScheduleCmdParams_init(&sched_params);
/*
* Allocate the advertisement commands on the stack rather than statically
* to RAM in order to save space. We don't need them after the
* advertisements have been transmitted.
*/
ble_cmd_adv_nc_t ble_cmd_adv_nc_array[NUM_BLE_ADV_CHANNELS];
RF_Op *initial_adv = NULL;
RF_ScheduleCmdParams sched_params;
RF_CmdHandle beacon_handle;
RF_EventMask beacon_events;
rf_result_t rf_result;
/* If no channels are mapped, then early return OK */
if((bm_channel & BLE_ADV_CHANNEL_ALL) == 0) {
return RF_RESULT_OK;
}
initial_adv = init_ble_adv_array(ble_cmd_adv_nc_array, bm_channel);
if(initial_adv == NULL) {
LOG_ERR("Initializing BLE Advertisement chain failed\n");
return RF_RESULT_ERROR;
}
RF_ScheduleCmdParams_init(&sched_params);
sched_params.priority = RF_PriorityNormal;
sched_params.endTime = 0;
sched_params.allowDelay = RF_AllowDelayAny;
CMD_STATUS(ble_cmd_beacon) = PENDING;
RF_CmdHandle beacon_handle = RF_scheduleCmd(
&rf_ble,
(RF_Op *)&ble_cmd_beacon,
&sched_params,
cb,
bm_event);
/*
* The most efficient way to schedule the command is as follows:
* 1. Schedule the BLE advertisement chain
* 2. Reschedule the RX command IF it was running.
* 3. Pend on the BLE avertisement chain
*/
beacon_handle = RF_scheduleCmd(
&rf_ble,
initial_adv,
&sched_params,
NULL,
0);
if(!CMD_HANDLE_OK(beacon_handle)) {
LOG_ERR("Unable to schedule BLE Beacon command, handle=%d status=0x%04x\n",
beacon_handle, CMD_STATUS(ble_cmd_beacon));
beacon_handle, CMD_STATUS(ble_cmd_adv_nc));
return RF_RESULT_ERROR;
}
const uint_fast8_t rx_key = cmd_rx_disable();
/* Note that this only reschedules RX if it is running */
rf_result = cmd_rx_restore(cmd_rx_disable());
/* Wait until Beacon operation finishes */
RF_EventMask beacon_events = RF_pendCmd(&rf_ble, beacon_handle, 0);
if(!EVENTS_CMD_DONE(beacon_events)) {
LOG_ERR("Pending on scheduled BLE Beacon command generated error, events=0x%08llx status=0x%04x\n",
beacon_events, CMD_STATUS(ble_cmd_beacon));
beacon_events = RF_pendCmd(&rf_ble, beacon_handle, 0);
if(rf_result != RF_RESULT_OK) {
LOG_ERR("Rescheduling CMD_RX failed when BLE advertising\n");
return RF_RESULT_ERROR;
}
if(!EVENTS_CMD_DONE(beacon_events)) {
LOG_ERR("Pending on scheduled BLE Beacon command generated error, events=0x%08llx status=0x%04x\n",
beacon_events, CMD_STATUS(ble_cmd_adv_nc));
cmd_rx_restore(rx_key);
return RF_RESULT_ERROR;
}
cmd_rx_restore(rx_key);
return RF_RESULT_OK;
#else

12
arch/cpu/simplelink-cc13xx-cc26xx/rf/sched.h
View File

@ -58,6 +58,16 @@ typedef enum {
RF_RESULT_ERROR,
} rf_result_t;
/*---------------------------------------------------------------------------*/
typedef enum {
BLE_ADV_CHANNEL_37 = (1 << 0),
BLE_ADV_CHANNEL_38 = (1 << 1),
BLE_ADV_CHANNEL_39 = (1 << 2),
BLE_ADV_CHANNEL_ALL = (BLE_ADV_CHANNEL_37 |
BLE_ADV_CHANNEL_38 |
BLE_ADV_CHANNEL_39),
} ble_adv_channel_t;
/*---------------------------------------------------------------------------*/
/**
* \name Common RF scheduler functionality.
*
@ -91,7 +101,7 @@ rf_result_t netstack_stop_rx(void);
* @{
*/
RF_Handle ble_open(RF_Params *params);
rf_result_t ble_sched_beacon(RF_Callback cb, RF_EventMask bm_event);
rf_result_t ble_sched_beacons(uint8_t bm_adv_channel);
/** @} */
/*---------------------------------------------------------------------------*/
#endif /* RF_SCHED_H_ */

4
arch/cpu/simplelink-cc13xx-cc26xx/rf/settings.h
View File

@ -89,7 +89,7 @@
#define ble_mode rf_ble_mode
#define ble_cmd_radio_setup rf_ble_cmd_radio_setup
#define ble_adv_par rf_ble_adv_par
#define ble_cmd_beacon rf_ble_cmd_ble_adv_nc
#define ble_cmd_adv_nc rf_ble_cmd_ble_adv_nc
/* CC13x2/CC26x2 devices */
#elif (DeviceFamily_PARENT == DeviceFamily_PARENT_CC13X2_CC26X2)
@ -97,7 +97,7 @@
#define ble_mode rf_ble_mode
#define ble_cmd_radio_setup rf_ble_cmd_radio_setup
#define ble_adv_par rf_ble_adv_par
#define ble_cmd_beacon rf_ble_cmd_ble_adv_nc
#define ble_cmd_adv_nc rf_ble_cmd_ble_adv_nc
#endif /* DeviceFamily_PARENT */

16
arch/platform/simplelink/cc13xx-cc26xx/contiki-conf.h
View File

@ -31,6 +31,10 @@
* \addtogroup cc13xx-cc26xx-platform
* @{
*
* The order of which these header files are included is important in order
* for the configurations to be correctly set. This has to do with some
* slight unfortunate configuration dependencies of the board file.
*
* \file
* Configuration for the SimpleLink CC13xx/CC26xx platform.
* \author
@ -40,18 +44,16 @@
#ifndef CONTIKI_CONF_H_
#define CONTIKI_CONF_H_
/*---------------------------------------------------------------------------*/
#include "board-conf.h"
/*---------------------------------------------------------------------------*/
/* Include Project Specific conf */
/* Include project-specific configurations */
#ifdef PROJECT_CONF_PATH
#include PROJECT_CONF_PATH
#endif
/*---------------------------------------------------------------------------*/
/* Include CPU-related configuration */
#include "cc13xx-cc26xx-conf.h"
/* Include board-specific configurations */
#include "board-conf.h"
/*---------------------------------------------------------------------------*/
/* Must be included after cc13xx-cc26xx-conf.h */
#include <Board.h>
/* Include CPU-related configurations */
#include "cc13xx-cc26xx-conf.h"
/*---------------------------------------------------------------------------*/
#endif /* CONTIKI_CONF_H_ */
/*---------------------------------------------------------------------------*/

2
arch/platform/simplelink/cc13xx-cc26xx/launchpad/board-conf.h
View File

@ -50,7 +50,7 @@
#ifndef BOARD_CONF_H_
#define BOARD_CONF_H_
/*---------------------------------------------------------------------------*/
#include "contiki-conf.h"
#include "rf-conf.h"
/*---------------------------------------------------------------------------*/
/**
* \name LED configurations for the dev/leds.h API.

3
arch/platform/simplelink/cc13xx-cc26xx/launchpad/cc1310/Board.h
View File

@ -36,6 +36,9 @@
#define Board_CC1310_LAUNCHXL
#define BOARD_STRING "TI CC1310 LaunchPad"
#define RF_CONF_FRONT_END_MODE RF_FRONT_END_MODE_DIFFERENTIAL
#define RF_CONF_BIAS_MODE RF_BIAS_MODE_EXTERNAL
#ifdef __cplusplus
extern "C" {
#endif

66
arch/platform/simplelink/cc13xx-cc26xx/launchpad/cc1310/rf-conf.h Normal file
View File

@ -0,0 +1,66 @@
/*
* Copyright (c) 2018, Texas Instruments Incorporated - http://www.ti.com/
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/**
* \addtogroup launchpad-peripherals
* @{
*
* \file
* Header file with board-specific RF configurations.
* \author
* Texas Instruments <e2e.ti.com>
* \note
* This file should not be included directly
*/
/*---------------------------------------------------------------------------*/
#ifndef RF_CONF_H_
#define RF_CONF_H_
/*---------------------------------------------------------------------------*/
#include "rf/rf.h"
/*---------------------------------------------------------------------------*/
/**
* \name Board-specific front-end mode configurations for the Sub-1 GHz path
* on the radio.
*
* These are the following front-end mode configurations for the
* CC1310-LAUNCHXL board:
* - Sub-1 GHz: differential and external bias
*
* @{
*/
#define RF_SUB_1_GHZ_CONF_FRONT_END_MODE RF_FRONT_END_MODE_DIFFERENTIAL
#define RF_SUB_1_GHZ_CONF_BIAS_MODE RF_BIAS_MODE_EXTERNAL
/** @} */
/*---------------------------------------------------------------------------*/
#endif /* RF_CONF_H_ */
/*---------------------------------------------------------------------------*/
/**
* @}
* @}
*/

6
arch/platform/simplelink/cc13xx-cc26xx/launchpad/cc1312r1/Board.h
View File

@ -33,15 +33,15 @@
#ifndef __BOARD_H
#define __BOARD_H
#define Board_CC1312R1_LAUNCHXL
#define BOARD_STRING "TI CC1312R1 LaunchPad"
#ifdef __cplusplus
extern "C" {
#endif
#include "CC1312R1_LAUNCHXL.h"
#define Board_CC1312R1_LAUNCHXL
#define BOARD_STRING "TI CC1312R1 LaunchPad"
#define Board_initGeneral() CC1312R1_LAUNCHXL_initGeneral()
#define Board_shutDownExtFlash() CC1312R1_LAUNCHXL_shutDownExtFlash()
#define Board_wakeUpExtFlash() CC1312R1_LAUNCHXL_wakeUpExtFlash()

65
arch/platform/simplelink/cc13xx-cc26xx/launchpad/cc1312r1/rf-conf.h Normal file
View File

@ -0,0 +1,65 @@
/*
* Copyright (c) 2018, Texas Instruments Incorporated - http://www.ti.com/
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/**
* \addtogroup launchpad-peripherals
* @{
*
* \file
* Header file with board-specific RF configurations.
* \author
* Texas Instruments <e2e.ti.com>
* \note
* This file should not be included directly
*/
/*---------------------------------------------------------------------------*/
#ifndef RF_CONF_H_
#define RF_CONF_H_
/*---------------------------------------------------------------------------*/
#include "rf/rf.h"
/*---------------------------------------------------------------------------*/
/**
* \name Board-specific front-end mode configurations for the Sub-1 GHz path
* on the radio.
*
* These are the following front-end mode configurations for the
* CC1312R1-LAUNCHXL board:
* - Sub-1 GHz: differential and external bias
*
* @{
*/
#define RF_SUB_1_GHZ_CONF_FRONT_END_MODE RF_FRONT_END_MODE_DIFFERENTIAL
#define RF_SUB_1_GHZ_CONF_BIAS_MODE RF_BIAS_MODE_EXTERNAL
/** @} */
/*---------------------------------------------------------------------------*/
#endif /* RF_CONF_H_ */
/*---------------------------------------------------------------------------*/
/**
* @}
*/

6
arch/platform/simplelink/cc13xx-cc26xx/launchpad/cc1350-4/Board.h
View File

@ -33,15 +33,15 @@
#ifndef __BOARD_H
#define __BOARD_H
#define Board_CC1350_LAUNCHXL_433
#define BOARD_STRING "TI CC1350-433 LaunchPad"
#ifdef __cplusplus
extern "C" {
#endif
#include "CC1350_LAUNCHXL_433.h"
#define Board_CC1350_LAUNCHXL_433
#define BOARD_STRING "TI CC1350-433 LaunchPad"
#define Board_initGeneral() CC1350_LAUNCHXL_433_initGeneral()
#define Board_shutDownExtFlash() CC1350_LAUNCHXL_433_shutDownExtFlash()
#define Board_wakeUpExtFlash() CC1350_LAUNCHXL_433_wakeUpExtFlash()

45
arch/platform/simplelink/cc13xx-cc26xx/launchpad/cc1350-4/CC1350_LAUNCHXL_433_fxns.c
View File

@ -165,23 +165,60 @@ void Board_initHook()
#if defined(Board_RF_SUB1GHZ)
/*
* ======== CC1350_LAUNCHXL_433_rfDriverCallback ========
* This is an implementation for the CC1350 launchpad which uses a
* Mask to be used to determine the effective value of the setup command's
* loDivider field.
*/
#define LODIVIDER_MASK 0x7F
/*
* ======== rfDriverCallback ========
* This is an implementation for the CC1350 LaunchPad which uses a
* single signal for antenna switching.
*/
void rfDriverCallback(RF_Handle client, RF_GlobalEvent events, void *arg)
{
/* Decode input arguments. */
(void)client;
RF_RadioSetup* setupCommand = (RF_RadioSetup*)arg;
/* Local variable. */
bool sub1GHz = false;
uint8_t loDivider = 0;
if (events & RF_GlobalEventRadioSetup) {
/* Power up the antenna switch */
PINCC26XX_setOutputValue(Board_RF_POWER, 1);
if (setupCommand->common.commandNo == CMD_PROP_RADIO_DIV_SETUP) {
/* Sub-1 GHz, requires antenna switch high */
/* Decision about the frequency band shall be made based on the
loDivider field. */
switch (setupCommand->common.commandNo) {
case (CMD_RADIO_SETUP):
case (CMD_BLE5_RADIO_SETUP):
loDivider = LODIVIDER_MASK & setupCommand->common.loDivider;
/* Sub-1 GHz, requires antenna switch high. */
if ((loDivider != 0) && (loDivider != 2)) {
sub1GHz = true;
}
break;
case (CMD_PROP_RADIO_DIV_SETUP):
loDivider = LODIVIDER_MASK & setupCommand->prop_div.loDivider;
/* Sub-1 GHz, requires antenna switch high. */
if ((loDivider != 0) && (loDivider != 2)) {
sub1GHz = true;
}
break;
default:break;
}
/* Select the correct antenna. */
if (sub1GHz) {
PINCC26XX_setOutputValue(Board_RF_SUB1GHZ, 1);
}
else {
PINCC26XX_setOutputValue(Board_RF_SUB1GHZ, 0);
}
}
else if (events & RF_GlobalEventRadioPowerDown) {
/* Disable antenna switch to save current */

69
arch/platform/simplelink/cc13xx-cc26xx/launchpad/cc1350-4/rf-conf.h Normal file
View File

@ -0,0 +1,69 @@
/*
* Copyright (c) 2018, Texas Instruments Incorporated - http://www.ti.com/
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/**
* \addtogroup launchpad-peripherals
* @{
*
* \file
* Header file with board-specific RF configurations.
* \author
* Texas Instruments <e2e.ti.com>
* \note
* This file should not be included directly
*/
/*---------------------------------------------------------------------------*/
#ifndef RF_CONF_H_
#define RF_CONF_H_
/*---------------------------------------------------------------------------*/
#include "rf/rf.h"
/*---------------------------------------------------------------------------*/
/**
* \name Board-specific front-end mode configurations for both the Sub-1 GHz
* path and the 2.4 GHz path on the radio.
*
* These are the following front-end mode configurations for the
* CC1350-4-LAUNCHXL board:
* - Sub-1 GHz: differential and external bias
* - 2.4 GHz: differential and external bias
*
* @{
*/
#define RF_SUB_1_GHZ_CONF_FRONT_END_MODE RF_FRONT_END_MODE_DIFFERENTIAL
#define RF_SUB_1_GHZ_CONF_BIAS_MODE RF_BIAS_MODE_EXTERNAL
#define RF_2_4_GHZ_CONF_FRONT_END_MODE RF_FRONT_END_MODE_DIFFERENTIAL
#define RF_2_4_GHZ_CONF_BIAS_MODE RF_BIAS_MODE_EXTERNAL
/** @} */
/*---------------------------------------------------------------------------*/
#endif /* RF_CONF_H_ */
/*---------------------------------------------------------------------------*/
/**
* @}
*/

6
arch/platform/simplelink/cc13xx-cc26xx/launchpad/cc1350/Board.h
View File

@ -33,15 +33,15 @@
#ifndef __BOARD_H
#define __BOARD_H
#define Board_CC1350_LAUNCHXL
#define BOARD_STRING "TI CC1350 LaunchPad"
#ifdef __cplusplus
extern "C" {
#endif
#include "CC1350_LAUNCHXL.h"
#define Board_CC1350_LAUNCHXL
#define BOARD_STRING "TI CC1350 LaunchPad"
#define Board_initGeneral() CC1350_LAUNCHXL_initGeneral()
#define Board_shutDownExtFlash() CC1350_LAUNCHXL_shutDownExtFlash()
#define Board_wakeUpExtFlash() CC1350_LAUNCHXL_wakeUpExtFlash()

41
arch/platform/simplelink/cc13xx-cc26xx/launchpad/cc1350/CC1350_LAUNCHXL_fxns.c
View File

@ -166,6 +166,12 @@ void Board_initHook()
*/
#if defined(Board_RF_SUB1GHZ)
/*
* Mask to be used to determine the effective value of the setup command's
* loDivider field.
*/
#define LODIVIDER_MASK 0x7F
/*
* ======== rfDriverCallback ========
* This is an implementation for the CC1350 launchpad which uses a
@ -173,17 +179,48 @@ void Board_initHook()
*/
void rfDriverCallback(RF_Handle client, RF_GlobalEvent events, void *arg)
{
/* Decode input arguments. */
(void)client;
RF_RadioSetup* setupCommand = (RF_RadioSetup*)arg;
/* Local variable. */
bool sub1GHz = false;
uint8_t loDivider = 0;
if (events & RF_GlobalEventRadioSetup) {
/* Power up the antenna switch */
PINCC26XX_setOutputValue(Board_RF_POWER, 1);
if (setupCommand->common.commandNo == CMD_PROP_RADIO_DIV_SETUP) {
/* Sub-1 GHz, requires antenna switch high */
/* Decision about the frequency band shall be made based on the
loDivider field. */
switch (setupCommand->common.commandNo) {
case (CMD_RADIO_SETUP):
case (CMD_BLE5_RADIO_SETUP):
loDivider = LODIVIDER_MASK & setupCommand->common.loDivider;
/* Sub-1 GHz, requires antenna switch high. */
if ((loDivider != 0) && (loDivider != 2)) {
sub1GHz = true;
}
break;
case (CMD_PROP_RADIO_DIV_SETUP):
loDivider = LODIVIDER_MASK & setupCommand->prop_div.loDivider;
/* Sub-1 GHz, requires antenna switch high. */
if ((loDivider != 0) && (loDivider != 2)) {
sub1GHz = true;
}
break;
default:break;
}
/* Select the correct antenna. */
if (sub1GHz) {
PINCC26XX_setOutputValue(Board_RF_SUB1GHZ, 1);
}
else {
PINCC26XX_setOutputValue(Board_RF_SUB1GHZ, 0);
}
}
else if (events & RF_GlobalEventRadioPowerDown) {
/* Disable antenna switch to save current */

69
arch/platform/simplelink/cc13xx-cc26xx/launchpad/cc1350/rf-conf.h Normal file
View File

@ -0,0 +1,69 @@
/*
* Copyright (c) 2018, Texas Instruments Incorporated - http://www.ti.com/
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/**
* \addtogroup launchpad-peripherals
* @{
*
* \file
* Header file with board-specific RF configurations.
* \author
* Texas Instruments <e2e.ti.com>
* \note
* This file should not be included directly
*/
/*---------------------------------------------------------------------------*/
#ifndef RF_CONF_H_
#define RF_CONF_H_
/*---------------------------------------------------------------------------*/
#include "rf/rf.h"
/*---------------------------------------------------------------------------*/
/**
* \name Board-specific front-end mode configurations for both the Sub-1 GHz
* path and the 2.4 GHz path on the radio.
*
* These are the following front-end mode configurations for the
* CC1350-LAUNCHXL board:
* - Sub-1 GHz: differential and external bias
* - 2.4 GHz: differential and external bias
*
* @{
*/
#define RF_SUB_1_GHZ_CONF_FRONT_END_MODE RF_FRONT_END_MODE_DIFFERENTIAL
#define RF_SUB_1_GHZ_CONF_BIAS_MODE RF_BIAS_MODE_EXTERNAL
#define RF_2_4_GHZ_CONF_FRONT_END_MODE RF_FRONT_END_MODE_DIFFERENTIAL
#define RF_2_4_GHZ_CONF_BIAS_MODE RF_BIAS_MODE_EXTERNAL
/** @} */
/*---------------------------------------------------------------------------*/
#endif /* RF_CONF_H_ */
/*---------------------------------------------------------------------------*/
/**
* @}
*/

6
arch/platform/simplelink/cc13xx-cc26xx/launchpad/cc1352p-2/Board.h
View File

@ -33,15 +33,15 @@
#ifndef __BOARD_H
#define __BOARD_H
#define Board_CC1352P_2_LAUNCHXL
#define BOARD_STRING "TI CC1352P-2 LaunchPad"
#ifdef __cplusplus
extern "C" {
#endif
#include "CC1352P_2_LAUNCHXL.h"
#define Board_CC1352P_2_LAUNCHXL
#define BOARD_STRING "TI CC1352P-2 LaunchPad"
#define Board_initGeneral() CC1352P_2_LAUNCHXL_initGeneral()
#define Board_shutDownExtFlash() CC1352P_2_LAUNCHXL_shutDownExtFlash()
#define Board_wakeUpExtFlash() CC1352P_2_LAUNCHXL_wakeUpExtFlash()

43
arch/platform/simplelink/cc13xx-cc26xx/launchpad/cc1352p-2/CC1352P_2_LAUNCHXL_fxns.c
View File

@ -152,6 +152,12 @@ void CC1352P_2_LAUNCHXL_shutDownExtFlash(void)
*/
#if defined(Board_RF_SUB1GHZ)
/*
* Mask to be used to determine the effective value of the setup command's
* loDivider field.
*/
#define LODIVIDER_MASK 0x7F
/*
* ======== Antenna switching ========
*/
@ -170,7 +176,7 @@ void initAntennaSwitch()
}
/*
* ======== rfDriverCallback ========
* ======== CC1352P1_LAUNCHXL_rfDriverCallback ========
* Sets up the antenna switch depending on the current PHY configuration.
* Truth table:
*
@ -183,6 +189,10 @@ void initAntennaSwitch()
*/
void rfDriverCallback(RF_Handle client, RF_GlobalEvent events, void *arg)
{
/* Local variable. */
bool sub1GHz = false;
uint8_t loDivider = 0;
/* Switch off all paths first. Needs to be done anyway in every sub-case below. */
PINCC26XX_setOutputValue(Board_RF_24GHZ, 0);
PINCC26XX_setOutputValue(Board_RF_HIGH_PA, 0);
@ -195,15 +205,36 @@ void rfDriverCallback(RF_Handle client, RF_GlobalEvent events, void *arg)
/* Decode the generic argument as a setup command. */
RF_RadioSetup* setupCommand = (RF_RadioSetup*)arg;
if (setupCommand->common.commandNo == CMD_PROP_RADIO_DIV_SETUP) {
switch (setupCommand->common.commandNo) {
case (CMD_RADIO_SETUP):
case (CMD_BLE5_RADIO_SETUP):
loDivider = LODIVIDER_MASK & setupCommand->common.loDivider;
/* Sub-1GHz front-end. */
if (loDivider != 0) {
sub1GHz = true;
}
break;
case (CMD_PROP_RADIO_DIV_SETUP):
loDivider = LODIVIDER_MASK & setupCommand->prop_div.loDivider;
/* Sub-1GHz front-end. */
if (loDivider != 0) {
sub1GHz = true;
}
break;
default:break;
}
if (sub1GHz) {
/* Sub-1 GHz */
if (paType == RF_TxPowerTable_HighPA) {
/* PA enable --> HIGH PA
* LNA enable --> Sub-1 GHz
*/
PINCC26XX_setMux(antennaPins, Board_RF_24GHZ, PINCC26XX_MUX_GPIO);
// Note: RFC_GPO3 is a work-around because the RFC_GPO1 (PA enable signal) is sometimes not
// de-asserted on CC1352 Rev A.
/* Note: RFC_GPO3 is a work-around because the RFC_GPO1 (PA enable signal) is sometimes not
de-asserted on CC1352 Rev A. */
PINCC26XX_setMux(antennaPins, Board_RF_HIGH_PA, PINCC26XX_MUX_RFC_GPO3);
PINCC26XX_setMux(antennaPins, Board_RF_SUB1GHZ, PINCC26XX_MUX_RFC_GPO0);
} else {
@ -221,8 +252,8 @@ void rfDriverCallback(RF_Handle client, RF_GlobalEvent events, void *arg)
* LNA enable --> 2.4 GHz
*/
PINCC26XX_setMux(antennaPins, Board_RF_24GHZ, PINCC26XX_MUX_RFC_GPO0);
// Note: RFC_GPO3 is a work-around because the RFC_GPO1 (PA enable signal) is sometimes not
// de-asserted on CC1352 Rev A.
/* Note: RFC_GPO3 is a work-around because the RFC_GPO1 (PA enable signal) is sometimes not
de-asserted on CC1352 Rev A. */
PINCC26XX_setMux(antennaPins, Board_RF_HIGH_PA, PINCC26XX_MUX_RFC_GPO3);
PINCC26XX_setMux(antennaPins, Board_RF_SUB1GHZ, PINCC26XX_MUX_GPIO);
} else {

69
arch/platform/simplelink/cc13xx-cc26xx/launchpad/cc1352p-2/rf-conf.h Normal file
View File

@ -0,0 +1,69 @@
/*
* Copyright (c) 2018, Texas Instruments Incorporated - http://www.ti.com/
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/**
* \addtogroup launchpad-peripherals
* @{
*
* \file
* Header file with board-specific RF configurations.
* \author
* Texas Instruments <e2e.ti.com>
* \note
* This file should not be included directly
*/
/*---------------------------------------------------------------------------*/
#ifndef RF_CONF_H_
#define RF_CONF_H_
/*---------------------------------------------------------------------------*/
#include "rf/rf.h"
/*---------------------------------------------------------------------------*/
/**
* \name Board-specific front-end mode configurations for both the Sub-1 GHz
* path and the 2.4 GHz path on the radio.
*
* These are the following front-end mode configurations for the
* CC1352P-2-LAUNCHXL board:
* - Sub-1 GHz: differential and external bias
* - 2.4 GHz: differential and external bias
*
* @{
*/
#define RF_SUB_1_GHZ_CONF_FRONT_END_MODE RF_FRONT_END_MODE_DIFFERENTIAL
#define RF_SUB_1_GHZ_CONF_BIAS_MODE RF_BIAS_MODE_EXTERNAL
#define RF_2_4_GHZ_CONF_FRONT_END_MODE RF_FRONT_END_MODE_DIFFERENTIAL
#define RF_2_4_GHZ_CONF_BIAS_MODE RF_BIAS_MODE_EXTERNAL
/** @} */
/*---------------------------------------------------------------------------*/
#endif /* RF_CONF_H_ */
/*---------------------------------------------------------------------------*/
/**
* @}
*/

6
arch/platform/simplelink/cc13xx-cc26xx/launchpad/cc1352p-4/Board.h
View File

@ -33,15 +33,15 @@
#ifndef __BOARD_H
#define __BOARD_H
#define Board_CC1352P_4_LAUNCHXL
#define BOARD_STRING "TI CC1352P-4 LaunchPad"
#ifdef __cplusplus
extern "C" {
#endif
#include "CC1352P_4_LAUNCHXL.h"
#define Board_CC1352P_4_LAUNCHXL
#define BOARD_STRING "TI CC1352P-4 LaunchPad"
#define Board_initGeneral() CC1352P_4_LAUNCHXL_initGeneral()
#define Board_shutDownExtFlash() CC1352P_4_LAUNCHXL_shutDownExtFlash()
#define Board_wakeUpExtFlash() CC1352P_4_LAUNCHXL_wakeUpExtFlash()

43
arch/platform/simplelink/cc13xx-cc26xx/launchpad/cc1352p-4/CC1352P_4_LAUNCHXL_fxns.c
View File

@ -152,6 +152,12 @@ void CC1352P_4_LAUNCHXL_shutDownExtFlash(void)
*/
#if defined(Board_RF_SUB1GHZ)
/*
* Mask to be used to determine the effective value of the setup command's
* loDivider field.
*/
#define LODIVIDER_MASK 0x7F
/*
* ======== Antenna switching ========
*/
@ -170,7 +176,7 @@ void initAntennaSwitch()
}
/*
* ======== rfDriverCallback ========
* ======== CC1352P1_LAUNCHXL_rfDriverCallback ========
* Sets up the antenna switch depending on the current PHY configuration.
* Truth table:
*
@ -183,6 +189,10 @@ void initAntennaSwitch()
*/
void rfDriverCallback(RF_Handle client, RF_GlobalEvent events, void *arg)
{
/* Local variable. */
bool sub1GHz = false;
uint8_t loDivider = 0;
/* Switch off all paths first. Needs to be done anyway in every sub-case below. */
PINCC26XX_setOutputValue(Board_RF_24GHZ, 0);
PINCC26XX_setOutputValue(Board_RF_HIGH_PA, 0);
@ -195,15 +205,36 @@ void rfDriverCallback(RF_Handle client, RF_GlobalEvent events, void *arg)
/* Decode the generic argument as a setup command. */
RF_RadioSetup* setupCommand = (RF_RadioSetup*)arg;
if (setupCommand->common.commandNo == CMD_PROP_RADIO_DIV_SETUP) {
switch (setupCommand->common.commandNo) {
case (CMD_RADIO_SETUP):
case (CMD_BLE5_RADIO_SETUP):
loDivider = LODIVIDER_MASK & setupCommand->common.loDivider;
/* Sub-1GHz front-end. */
if (loDivider != 0) {
sub1GHz = true;
}
break;
case (CMD_PROP_RADIO_DIV_SETUP):
loDivider = LODIVIDER_MASK & setupCommand->prop_div.loDivider;
/* Sub-1GHz front-end. */
if (loDivider != 0) {
sub1GHz = true;
}
break;
default:break;
}
if (sub1GHz) {
/* Sub-1 GHz */
if (paType == RF_TxPowerTable_HighPA) {
/* PA enable --> HIGH PA
* LNA enable --> Sub-1 GHz
*/
PINCC26XX_setMux(antennaPins, Board_RF_24GHZ, PINCC26XX_MUX_GPIO);
// Note: RFC_GPO3 is a work-around because the RFC_GPO1 (PA enable signal) is sometimes not
// de-asserted on CC1352 Rev A.
/* Note: RFC_GPO3 is a work-around because the RFC_GPO1 (PA enable signal) is sometimes not
de-asserted on CC1352 Rev A. */
PINCC26XX_setMux(antennaPins, Board_RF_HIGH_PA, PINCC26XX_MUX_RFC_GPO3);
PINCC26XX_setMux(antennaPins, Board_RF_SUB1GHZ, PINCC26XX_MUX_RFC_GPO0);
} else {
@ -221,8 +252,8 @@ void rfDriverCallback(RF_Handle client, RF_GlobalEvent events, void *arg)
* LNA enable --> 2.4 GHz
*/
PINCC26XX_setMux(antennaPins, Board_RF_24GHZ, PINCC26XX_MUX_RFC_GPO0);
// Note: RFC_GPO3 is a work-around because the RFC_GPO1 (PA enable signal) is sometimes not
// de-asserted on CC1352 Rev A.
/* Note: RFC_GPO3 is a work-around because the RFC_GPO1 (PA enable signal) is sometimes not
de-asserted on CC1352 Rev A. */
PINCC26XX_setMux(antennaPins, Board_RF_HIGH_PA, PINCC26XX_MUX_RFC_GPO3);
PINCC26XX_setMux(antennaPins, Board_RF_SUB1GHZ, PINCC26XX_MUX_GPIO);
} else {

69
arch/platform/simplelink/cc13xx-cc26xx/launchpad/cc1352p-4/rf-conf.h Normal file
View File

@ -0,0 +1,69 @@
/*
* Copyright (c) 2018, Texas Instruments Incorporated - http://www.ti.com/
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/**
* \addtogroup launchpad-peripherals
* @{
*
* \file
* Header file with board-specific RF configurations.
* \author
* Texas Instruments <e2e.ti.com>
* \note
* This file should not be included directly
*/
/*---------------------------------------------------------------------------*/
#ifndef RF_CONF_H_
#define RF_CONF_H_
/*---------------------------------------------------------------------------*/
#include "rf/rf.h"
/*---------------------------------------------------------------------------*/
/**
* \name Board-specific front-end mode configurations for both the Sub-1 GHz
* path and the 2.4 GHz path on the radio.
*
* These are the following front-end mode configurations for the
* CC1352P-4-LAUNCHXL board:
* - Sub-1 GHz: differential and external bias
* - 2.4 GHz: differential and external bias
*
* @{
*/
#define RF_SUB_1_GHZ_CONF_FRONT_END_MODE RF_FRONT_END_MODE_DIFFERENTIAL
#define RF_SUB_1_GHZ_CONF_BIAS_MODE RF_BIAS_MODE_EXTERNAL
#define RF_2_4_GHZ_CONF_FRONT_END_MODE RF_FRONT_END_MODE_DIFFERENTIAL
#define RF_2_4_GHZ_CONF_BIAS_MODE RF_BIAS_MODE_EXTERNAL
/** @} */
/*---------------------------------------------------------------------------*/
#endif /* RF_CONF_H_ */
/*---------------------------------------------------------------------------*/
/**
* @}
*/

6
arch/platform/simplelink/cc13xx-cc26xx/launchpad/cc1352p1/Board.h
View File

@ -33,15 +33,15 @@
#ifndef __BOARD_H
#define __BOARD_H
#define Board_CC1352P1_LAUNCHXL
#define BOARD_STRING "TI CC1352P1 LaunchPad"
#ifdef __cplusplus
extern "C" {
#endif
#include "CC1352P1_LAUNCHXL.h"
#define Board_CC1352P1_LAUNCHXL
#define BOARD_STRING "TI CC1352P1 LaunchPad"
#define Board_initGeneral() CC1352P1_LAUNCHXL_initGeneral()
#define Board_shutDownExtFlash() CC1352P1_LAUNCHXL_shutDownExtFlash()
#define Board_wakeUpExtFlash() CC1352P1_LAUNCHXL_wakeUpExtFlash()

43
arch/platform/simplelink/cc13xx-cc26xx/launchpad/cc1352p1/CC1352P1_LAUNCHXL_fxns.c
View File

@ -152,6 +152,12 @@ void CC1352P1_LAUNCHXL_shutDownExtFlash(void)
*/
#if defined(Board_RF_SUB1GHZ)
/*
* Mask to be used to determine the effective value of the setup command's
* loDivider field.
*/
#define LODIVIDER_MASK 0x7F
/*
* ======== Antenna switching ========
*/
@ -170,7 +176,7 @@ void initAntennaSwitch()
}
/*
* ======== rfDriverCallback ========
* ======== CC1352P1_LAUNCHXL_rfDriverCallback ========
* Sets up the antenna switch depending on the current PHY configuration.
* Truth table:
*
@ -183,6 +189,10 @@ void initAntennaSwitch()
*/
void rfDriverCallback(RF_Handle client, RF_GlobalEvent events, void *arg)
{
/* Local variable. */
bool sub1GHz = false;
uint8_t loDivider = 0;
/* Switch off all paths first. Needs to be done anyway in every sub-case below. */
PINCC26XX_setOutputValue(Board_RF_24GHZ, 0);
PINCC26XX_setOutputValue(Board_RF_HIGH_PA, 0);
@ -195,15 +205,36 @@ void rfDriverCallback(RF_Handle client, RF_GlobalEvent events, void *arg)
/* Decode the generic argument as a setup command. */
RF_RadioSetup* setupCommand = (RF_RadioSetup*)arg;
if (setupCommand->common.commandNo == CMD_PROP_RADIO_DIV_SETUP) {
switch (setupCommand->common.commandNo) {
case (CMD_RADIO_SETUP):
case (CMD_BLE5_RADIO_SETUP):
loDivider = LODIVIDER_MASK & setupCommand->common.loDivider;
/* Sub-1GHz front-end. */
if (loDivider != 0) {
sub1GHz = true;
}
break;
case (CMD_PROP_RADIO_DIV_SETUP):
loDivider = LODIVIDER_MASK & setupCommand->prop_div.loDivider;
/* Sub-1GHz front-end. */
if (loDivider != 0) {
sub1GHz = true;
}
break;
default:break;
}
if (sub1GHz) {
/* Sub-1 GHz */
if (paType == RF_TxPowerTable_HighPA) {
/* PA enable --> HIGH PA
* LNA enable --> Sub-1 GHz
*/
PINCC26XX_setMux(antennaPins, Board_RF_24GHZ, PINCC26XX_MUX_GPIO);
// Note: RFC_GPO3 is a work-around because the RFC_GPO1 (PA enable signal) is sometimes not
// de-asserted on CC1352 Rev A.
/* Note: RFC_GPO3 is a work-around because the RFC_GPO1 (PA enable signal) is sometimes not
de-asserted on CC1352 Rev A. */
PINCC26XX_setMux(antennaPins, Board_RF_HIGH_PA, PINCC26XX_MUX_RFC_GPO3);
PINCC26XX_setMux(antennaPins, Board_RF_SUB1GHZ, PINCC26XX_MUX_RFC_GPO0);
} else {
@ -221,8 +252,8 @@ void rfDriverCallback(RF_Handle client, RF_GlobalEvent events, void *arg)
* LNA enable --> 2.4 GHz
*/
PINCC26XX_setMux(antennaPins, Board_RF_24GHZ, PINCC26XX_MUX_RFC_GPO0);
// Note: RFC_GPO3 is a work-around because the RFC_GPO1 (PA enable signal) is sometimes not
// de-asserted on CC1352 Rev A.
/* Note: RFC_GPO3 is a work-around because the RFC_GPO1 (PA enable signal) is sometimes not
de-asserted on CC1352 Rev A. */
PINCC26XX_setMux(antennaPins, Board_RF_HIGH_PA, PINCC26XX_MUX_RFC_GPO3);
PINCC26XX_setMux(antennaPins, Board_RF_SUB1GHZ, PINCC26XX_MUX_GPIO);
} else {

69
arch/platform/simplelink/cc13xx-cc26xx/launchpad/cc1352p1/rf-conf.h Normal file
View File

@ -0,0 +1,69 @@
/*
* Copyright (c) 2018, Texas Instruments Incorporated - http://www.ti.com/
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/**
* \addtogroup launchpad-peripherals
* @{
*
* \file
* Header file with board-specific RF configurations.
* \author
* Texas Instruments <e2e.ti.com>
* \note
* This file should not be included directly
*/
/*---------------------------------------------------------------------------*/
#ifndef RF_CONF_H_
#define RF_CONF_H_
/*---------------------------------------------------------------------------*/
#include "rf/rf.h"
/*---------------------------------------------------------------------------*/
/**
* \name Board-specific front-end mode configurations for both the Sub-1 GHz
* path and the 2.4 GHz path on the radio.
*
* These are the following front-end mode configurations for the
* CC1352P1-LAUNCHXL board:
* - Sub-1 GHz: differential and external bias
* - 2.4 GHz: differential and external bias
*
* @{
*/
#define RF_SUB_1_GHZ_CONF_FRONT_END_MODE RF_FRONT_END_MODE_DIFFERENTIAL
#define RF_SUB_1_GHZ_CONF_BIAS_MODE RF_BIAS_MODE_EXTERNAL
#define RF_2_4_GHZ_CONF_FRONT_END_MODE RF_FRONT_END_MODE_DIFFERENTIAL
#define RF_2_4_GHZ_CONF_BIAS_MODE RF_BIAS_MODE_EXTERNAL
/** @} */
/*---------------------------------------------------------------------------*/
#endif /* RF_CONF_H_ */
/*---------------------------------------------------------------------------*/
/**
* @}
*/

6
arch/platform/simplelink/cc13xx-cc26xx/launchpad/cc1352r1/Board.h
View File

@ -33,15 +33,15 @@
#ifndef __BOARD_H
#define __BOARD_H
#define Board_CC1352R1_LAUNCHXL
#define BOARD_STRING "TI CC1352R1 LaunchPad"
#ifdef __cplusplus
extern "C" {
#endif
#include "CC1352R1_LAUNCHXL.h"
#define Board_CC1352R1_LAUNCHXL
#define BOARD_STRING "TI CC1352R1 LaunchPad"
#define Board_initGeneral() CC1352R1_LAUNCHXL_initGeneral()
#define Board_shutDownExtFlash() CC1352R1_LAUNCHXL_shutDownExtFlash()
#define Board_wakeUpExtFlash() CC1352R1_LAUNCHXL_wakeUpExtFlash()

2
arch/platform/simplelink/cc13xx-cc26xx/launchpad/cc1352r1/CC1352R1_LAUNCHXL.c
View File

@ -36,8 +36,6 @@
* CC1352R1_LAUNCHXL board.
*/
#include "contiki.h"
#include <stdbool.h>
#include <stddef.h>
#include <stdint.h>

50
arch/platform/simplelink/cc13xx-cc26xx/launchpad/cc1352r1/CC1352R1_LAUNCHXL_fxns.c
View File

@ -164,23 +164,61 @@ void Board_initHook()
*/
#if defined(Board_RF_SUB1GHZ)
/*
* Mask to be used to determine the effective value of the setup command's
* loDivider field.
*/
#define LODIVIDER_MASK 0x7F
/*
* ======== rfDriverCallback ========
* This is an implementation for the CC1352R1 launchpad which uses a
* This is an implementation for the CC1352R launchpad which uses a
* single signal for antenna switching.
*/
void rfDriverCallback(RF_Handle client, RF_GlobalEvent events, void *arg)
{
/* Decode input arguments. */
(void)client;
RF_RadioSetup* setupCommand = (RF_RadioSetup*)arg;
if ((events & RF_GlobalEventRadioSetup) &&
(setupCommand->common.commandNo == CMD_PROP_RADIO_DIV_SETUP)) {
/* Sub-1 GHz, requires antenna switch high */
PINCC26XX_setOutputValue(Board_RF_SUB1GHZ, 1);
/* Local variable. */
bool sub1GHz = false;
uint8_t loDivider = 0;
if (events & RF_GlobalEventRadioSetup) {
/* Decision about the frequency band shall be made based on the
loDivider field. */
switch (setupCommand->common.commandNo) {
case (CMD_RADIO_SETUP):
case (CMD_BLE5_RADIO_SETUP):
loDivider = LODIVIDER_MASK & setupCommand->common.loDivider;
/* Sub-1GHz front-end. */
if (loDivider != 0) {
sub1GHz = true;
}
break;
case (CMD_PROP_RADIO_DIV_SETUP):
loDivider = LODIVIDER_MASK & setupCommand->prop_div.loDivider;
/* Sub-1GHz front-end. */
if (loDivider != 0) {
sub1GHz = true;
}
break;
default:break;
}
/* Select the correct antenna. */
if (sub1GHz) {
PINCC26XX_setOutputValue(Board_RF_SUB1GHZ, 1);
}
else {
PINCC26XX_setOutputValue(Board_RF_SUB1GHZ, 0);
}
}
else if (events & RF_GlobalEventRadioPowerDown) {
/* Disable antenna switch to save current */
/* Set the antenna to 2.4 GHz as default. */
PINCC26XX_setOutputValue(Board_RF_SUB1GHZ, 0);
}
}

69
arch/platform/simplelink/cc13xx-cc26xx/launchpad/cc1352r1/rf-conf.h Normal file
View File

@ -0,0 +1,69 @@
/*
* Copyright (c) 2018, Texas Instruments Incorporated - http://www.ti.com/
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/**
* \addtogroup launchpad-peripherals
* @{
*
* \file
* Header file with board-specific RF configurations.
* \author
* Texas Instruments <e2e.ti.com>
* \note
* This file should not be included directly
*/
/*---------------------------------------------------------------------------*/
#ifndef RF_CONF_H_
#define RF_CONF_H_
/*---------------------------------------------------------------------------*/
#include "rf/rf.h"
/*---------------------------------------------------------------------------*/
/**
* \name Board-specific front-end mode configurations for both the Sub-1 GHz
* path and the 2.4 GHz path on the radio.
*
* These are the following front-end mode configurations for the
* CC1352R1-LAUNCHXL board:
* - Sub-1 GHz: differential and external bias
* - 2.4 GHz: differential and external bias
*
* @{
*/
#define RF_SUB_1_GHZ_CONF_FRONT_END_MODE RF_FRONT_END_MODE_DIFFERENTIAL
#define RF_SUB_1_GHZ_CONF_BIAS_MODE RF_BIAS_MODE_EXTERNAL
#define RF_2_4_GHZ_CONF_FRONT_END_MODE RF_FRONT_END_MODE_DIFFERENTIAL
#define RF_2_4_GHZ_CONF_BIAS_MODE RF_BIAS_MODE_EXTERNAL
/** @} */
/*---------------------------------------------------------------------------*/
#endif /* RF_CONF_H_ */
/*---------------------------------------------------------------------------*/
/**
* @}
*/

10
arch/platform/simplelink/cc13xx-cc26xx/launchpad/cc2650/Board.h
View File

@ -33,18 +33,18 @@
#ifndef __BOARD_H
#define __BOARD_H
#define Board_CC2650_LAUNCHXL
#define BOARD_STRING "TI CC2650 LaunchPad"
#ifdef __cplusplus
extern "C" {
#endif
#include "CC2650_LAUNCHXL.h"
#define Board_initGeneral() CC2650_LAUNCHXL_initGeneral()
#define Board_CC2650_LAUNCHXL
#define BOARD_STRING "TI CC2650 LaunchPad"
#define Board_initGeneral() CC2650_LAUNCHXL_initGeneral()
#define Board_shutDownExtFlash() CC2650_LAUNCHXL_shutDownExtFlash()
#define Board_wakeUpExtFlash() CC2650_LAUNCHXL_wakeUpExtFlash()
#define Board_wakeUpExtFlash() CC2650_LAUNCHXL_wakeUpExtFlash()
/* These #defines allow us to reuse TI-RTOS across other device families */

65
arch/platform/simplelink/cc13xx-cc26xx/launchpad/cc2650/rf-conf.h Normal file
View File

@ -0,0 +1,65 @@
/*
* Copyright (c) 2018, Texas Instruments Incorporated - http://www.ti.com/
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/**
* \addtogroup launchpad-peripherals
* @{
*
* \file
* Header file with board-specific RF configurations.
* \author
* Texas Instruments <e2e.ti.com>
* \note
* This file should not be included directly
*/
/*---------------------------------------------------------------------------*/
#ifndef RF_CONF_H_
#define RF_CONF_H_
/*---------------------------------------------------------------------------*/
#include "rf/rf.h"
/*---------------------------------------------------------------------------*/
/**
* \name Board-specific front-end mode configurations for the 2.4 GHz path
* on the radio.
*
* These are the following front-end mode configurations for the
* CC2650-LAUNCHXL board:
* - 2.4 GHz: differential and internal bias
*
* @{
*/
#define RF_2_4_GHZ_CONF_FRONT_END_MODE RF_FRONT_END_MODE_DIFFERENTIAL
#define RF_2_4_GHZ_CONF_BIAS_MODE RF_BIAS_MODE_INTERNAL
/** @} */
/*---------------------------------------------------------------------------*/
#endif /* RF_CONF_H_ */
/*---------------------------------------------------------------------------*/
/**
* @}
*/

10
arch/platform/simplelink/cc13xx-cc26xx/launchpad/cc26x2r1/Board.h
View File

@ -33,20 +33,18 @@
#ifndef __BOARD_H
#define __BOARD_H
#define Board_CC26X2R1_LAUNCHXL
#define BOARD_STRING "TI CC26x2R1 LaunchPad"
#ifdef __cplusplus
extern "C" {
#endif
#include "CC26X2R1_LAUNCHXL.h"
#define Board_initGeneral() CC26X2R1_LAUNCHXL_initGeneral()
#define Board_CC26X2R1_LAUNCHXL
#define BOARD_STRING "TI CC26x2R1 LaunchPad"
#define Board_initGeneral() CC26X2R1_LAUNCHXL_initGeneral()
#define Board_shutDownExtFlash() CC26X2R1_LAUNCHXL_shutDownExtFlash()
#define Board_wakeUpExtFlash() CC26X2R1_LAUNCHXL_wakeUpExtFlash()
#define Board_wakeUpExtFlash() CC26X2R1_LAUNCHXL_wakeUpExtFlash()
/* These #defines allow us to reuse TI-RTOS across other device families */

1
arch/platform/simplelink/cc13xx-cc26xx/launchpad/cc26x2r1/CC26X2R1_LAUNCHXL.c
View File

@ -35,7 +35,6 @@
* This file is responsible for setting up the board specific items for the
* CC26X2R1_LAUNCHXL board.
*/
#include "contiki.h"
#include <stdbool.h>
#include <stddef.h>

65
arch/platform/simplelink/cc13xx-cc26xx/launchpad/cc26x2r1/rf-conf.h Normal file
View File

@ -0,0 +1,65 @@
/*
* Copyright (c) 2018, Texas Instruments Incorporated - http://www.ti.com/
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/**
* \addtogroup launchpad-peripherals
* @{
*
* \file
* Header file with board-specific RF configurations.
* \author
* Texas Instruments <e2e.ti.com>
* \note
* This file should not be included directly
*/
/*---------------------------------------------------------------------------*/
#ifndef RF_CONF_H_
#define RF_CONF_H_
/*---------------------------------------------------------------------------*/
#include "rf/rf.h"
/*---------------------------------------------------------------------------*/
/**
* \name Board-specific front-end mode configurations for the 2.4 GHz path
* on the radio.
*
* These are the following front-end mode configurations for the
* CC26X2R1-LAUNCHXL board:
* - 2.4 GHz: differential and internal bias
*
* @{
*/
#define RF_2_4_GHZ_CONF_FRONT_END_MODE RF_FRONT_END_MODE_DIFFERENTIAL
#define RF_2_4_GHZ_CONF_BIAS_MODE RF_BIAS_MODE_INTERNAL
/** @} */
/*---------------------------------------------------------------------------*/
#endif /* RF_CONF_H_ */
/*---------------------------------------------------------------------------*/
/**
* @}
*/

3
arch/platform/simplelink/cc13xx-cc26xx/sensortag/board-conf.h
View File

@ -50,8 +50,7 @@
#ifndef BOARD_CONF_H_
#define BOARD_CONF_H_
/*---------------------------------------------------------------------------*/
#include "contiki-conf.h"
/*---------------------------------------------------------------------------*/
#include "rf-conf.h"
#include "leds-arch.h"
/*---------------------------------------------------------------------------*/
/**

6
arch/platform/simplelink/cc13xx-cc26xx/sensortag/cc1350/Board.h
View File

@ -33,15 +33,15 @@
#ifndef __BOARD_H
#define __BOARD_H
#define Board_CC1350STK
#define BOARD_STRING "TI CC1350 SensorTag"
#ifdef __cplusplus
extern "C" {
#endif
#include "CC1350STK.h"
#define Board_CC1350STK
#define BOARD_STRING "TI CC1350 SensorTag"
#define Board_initGeneral() CC1350STK_initGeneral()
#define Board_shutDownExtFlash() CC1350STK_shutDownExtFlash()
#define Board_wakeUpExtFlash() CC1350STK_wakeUpExtFlash()

69
arch/platform/simplelink/cc13xx-cc26xx/sensortag/cc1350/rf-conf.h Normal file
View File

@ -0,0 +1,69 @@
/*
* Copyright (c) 2018, Texas Instruments Incorporated - http://www.ti.com/
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/**
* \addtogroup launchpad-peripherals
* @{
*
* \file
* Header file with board-specific RF configurations.
* \author
* Texas Instruments <e2e.ti.com>
* \note
* This file should not be included directly
*/
/*---------------------------------------------------------------------------*/
#ifndef RF_CONF_H_
#define RF_CONF_H_
/*---------------------------------------------------------------------------*/
#include "rf/rf.h"
/*---------------------------------------------------------------------------*/
/**
* \name Board-specific front-end mode configurations for both the Sub-1 GHz
* path and the 2.4 GHz path on the radio.
*
* These are the following front-end mode configurations for the
* CC1350STK board:
* - Sub-1 GHz: single-ended RFN and external bias
* - 2.4 GHz: single-ended RFP and external bias
*
* @{
*/
#define RF_SUB_1_GHZ_CONF_FRONT_END_MODE RF_FRONT_END_MODE_SINGLE_ENDED_RFN
#define RF_SUB_1_GHZ_CONF_BIAS_MODE RF_BIAS_MODE_EXTERNAL
#define RF_2_4_GHZ_CONF_FRONT_END_MODE RF_FRONT_END_MODE_SINGLE_ENDED_RFP
#define RF_2_4_GHZ_CONF_BIAS_MODE RF_BIAS_MODE_EXTERNAL
/** @} */
/*---------------------------------------------------------------------------*/
#endif /* RF_CONF_H_ */
/*---------------------------------------------------------------------------*/
/**
* @}
*/

6
arch/platform/simplelink/cc13xx-cc26xx/sensortag/cc2650/Board.h
View File

@ -33,15 +33,15 @@
#ifndef __BOARD_H
#define __BOARD_H
#define Board_CC2650STK
#define BOARD_STRING "TI CC2650 SensorTag"
#ifdef __cplusplus
extern "C" {
#endif
#include "CC2650STK.h"
#define Board_CC2650STK
#define BOARD_STRING "TI CC2650 SensorTag"
#define Board_initGeneral() CC2650STK_initGeneral()
#define Board_shutDownExtFlash() CC2650STK_shutDownExtFlash()
#define Board_wakeUpExtFlash() CC2650STK_wakeUpExtFlash()

65
arch/platform/simplelink/cc13xx-cc26xx/sensortag/cc2650/rf-conf.h Normal file
View File

@ -0,0 +1,65 @@
/*
* Copyright (c) 2018, Texas Instruments Incorporated - http://www.ti.com/
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/**
* \addtogroup launchpad-peripherals
* @{
*
* \file
* Header file with board-specific RF configurations.
* \author
* Texas Instruments <e2e.ti.com>
* \note
* This file should not be included directly
*/
/*---------------------------------------------------------------------------*/
#ifndef RF_CONF_H_
#define RF_CONF_H_
/*---------------------------------------------------------------------------*/
#include "rf/rf.h"
/*---------------------------------------------------------------------------*/
/**
* \name Board-specific front-end mode configurations for the 2.4 GHz path
* on the radio.
*
* These are the following front-end mode configurations for the
* CC2650STK board:
* - 2.4 GHz: differential and internal bias
*
* @{
*/
#define RF_2_4_GHZ_CONF_FRONT_END_MODE RF_FRONT_END_MODE_DIFFERENTIAL
#define RF_2_4_GHZ_CONF_BIAS_MODE RF_BIAS_MODE_INTERNAL
/** @} */
/*---------------------------------------------------------------------------*/
#endif /* RF_CONF_H_ */
/*---------------------------------------------------------------------------*/
/**
* @}
*/

2
arch/platform/simplelink/cc13xx-cc26xx/srf06/board-conf.h
View File

@ -42,6 +42,8 @@
#ifndef BOARD_CONF_H_
#define BOARD_CONF_H_
/*---------------------------------------------------------------------------*/
#include "rf-conf.h"
/*---------------------------------------------------------------------------*/
/**
* \name LED configurations for the dev/leds.h API.
*

6
arch/platform/simplelink/cc13xx-cc26xx/srf06/cc13x0/Board.h
View File

@ -33,15 +33,15 @@
#ifndef __BOARD_H
#define __BOARD_H
#define Board_CC1350DK_7XD
#define BOARD_STRING "TI SmartRF06EB + CC13x0 EM"
#ifdef __cplusplus
extern "C" {
#endif
#include "CC1350DK_7XD.h"
#define Board_CC1350DK_7XD
#define BOARD_STRING "TI SmartRF06EB + CC13x0 EM"
#define Board_initGeneral() CC1350DK_7XD_initGeneral()
#define Board_shutDownExtFlash() CC1350DK_7XD_shutDownExtFlash()
#define Board_wakeUpExtFlash() CC1350DK_7XD_wakeUpExtFlash()

69
arch/platform/simplelink/cc13xx-cc26xx/srf06/cc13x0/rf-conf.h Normal file
View File

@ -0,0 +1,69 @@
/*
* Copyright (c) 2018, Texas Instruments Incorporated - http://www.ti.com/
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/**
* \addtogroup launchpad-peripherals
* @{
*
* \file
* Header file with board-specific RF configurations.
* \author
* Texas Instruments <e2e.ti.com>
* \note
* This file should not be included directly
*/
/*---------------------------------------------------------------------------*/
#ifndef RF_CONF_H_
#define RF_CONF_H_
/*---------------------------------------------------------------------------*/
#include "rf/rf.h"
/*---------------------------------------------------------------------------*/
/**
* \name Board-specific front-end mode configurations for both the Sub-1 GHz
* path and the 2.4 GHz path on the radio.
*
* These are the following front-end mode configurations for the
* CC1350DK-7XD board:
* - Sub-1 GHz: differential and external bias
* - 2.4 GHz: differential and external bias
*
* @{
*/
#define RF_SUB_1_GHZ_CONF_FRONT_END_MODE RF_FRONT_END_MODE_DIFFERENTIAL
#define RF_SUB_1_GHZ_CONF_BIAS_MODE RF_BIAS_MODE_EXTERNAL
#define RF_2_4_GHZ_CONF_FRONT_END_MODE RF_FRONT_END_MODE_DIFFERENTIAL
#define RF_2_4_GHZ_CONF_BIAS_MODE RF_BIAS_MODE_EXTERNAL
/** @} */
/*---------------------------------------------------------------------------*/
#endif /* RF_CONF_H_ */
/*---------------------------------------------------------------------------*/
/**
* @}
*/

6
arch/platform/simplelink/cc13xx-cc26xx/srf06/cc26x0/Board.h
View File

@ -33,15 +33,15 @@
#ifndef __BOARD_H
#define __BOARD_H
#define Board_CC2650DK_7ID
#define BOARD_STRING "TI SmartRF06EB + CC26x0 EM"
#ifdef __cplusplus
extern "C" {
#endif
#include "CC2650DK_7ID.h"
#define Board_CC2650DK_7ID
#define BOARD_STRING "TI SmartRF06EB + CC26x0 EM"
#define Board_initGeneral() CC2650DK_7ID_initGeneral()
#define Board_shutDownExtFlash() CC2650DK_7ID_shutDownExtFlash()
#define Board_wakeUpExtFlash() CC2650DK_7ID_wakeUpExtFlash()

65
arch/platform/simplelink/cc13xx-cc26xx/srf06/cc26x0/rf-conf.h Normal file
View File

@ -0,0 +1,65 @@
/*
* Copyright (c) 2018, Texas Instruments Incorporated - http://www.ti.com/
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/**
* \addtogroup launchpad-peripherals
* @{
*
* \file
* Header file with board-specific RF configurations.
* \author
* Texas Instruments <e2e.ti.com>
* \note
* This file should not be included directly
*/
/*---------------------------------------------------------------------------*/
#ifndef RF_CONF_H_
#define RF_CONF_H_
/*---------------------------------------------------------------------------*/
#include "rf/rf.h"
/*---------------------------------------------------------------------------*/
/**
* \name Board-specific front-end mode configurations for the 2.4 GHz path
* on the radio.
*
* These are the following front-end mode configurations for the
* CC2650DK-7ID board:
* - 2.4 GHz: differential and internal bias
*
* @{
*/
#define RF_2_4_GHZ_CONF_FRONT_END_MODE RF_FRONT_END_MODE_DIFFERENTIAL
#define RF_2_4_GHZ_CONF_BIAS_MODE RF_BIAS_MODE_INTERNAL
/** @} */
/*---------------------------------------------------------------------------*/
#endif /* RF_CONF_H_ */
/*---------------------------------------------------------------------------*/
/**
* @}
*/