Merge branch 'develop' into contrib/csma-llsec

.gitignore

@@ -36,7 +36,7 @@ COOJA.testlog
 *.simplelink
 *.sky
 *.firmware
-*.srf06-cc26xx
+*.cc26x0-cc13x0
 *.zoul
 
 # do not ignore platform makefiles
@@ -47,7 +47,7 @@ COOJA.testlog
 !Makefile.nrf52dk
 !Makefile.openmote-cc2538
 !Makefile.sky
-!Makefile.srf06-cc26xx
+!Makefile.cc26x0-cc13x0
 !Makefile.zoul
 
 # other nRF52 build artifacts

.gitmodules

@@ -2,10 +2,10 @@
 	path = tools/cc2538-bsl
 	url = https://github.com/JelmerT/cc2538-bsl.git
 [submodule "arch/cpu/cc26xx-cc13xx/lib/cc26xxware"]
-	path = arch/cpu/cc26xx-cc13xx/lib/cc26xxware
+	path = arch/cpu/cc26x0-cc13x0/lib/cc26xxware
 	url = https://github.com/contiki-ng/cc26xxware.git
 [submodule "arch/cpu/cc26xx-cc13xx/lib/cc13xxware"]
-	path = arch/cpu/cc26xx-cc13xx/lib/cc13xxware
+	path = arch/cpu/cc26x0-cc13x0/lib/cc13xxware
 	url = https://github.com/contiki-ng/cc13xxware.git
 [submodule "tools/sensniff"]
 	path = tools/sensniff
@@ -26,5 +26,5 @@
 	path = arch/cpu/simplelink-cc13xx-cc26xx/lib/coresdk_cc13xx_cc26xx
 	url = https://github.com/contiki-ng/coresdk_cc13xx_cc26xx.git
 [submodule "arch/cpu/cc26xx-cc13xx/lib/cc2640r2-sdk"]
-	path = arch/cpu/cc26xx-cc13xx/lib/cc2640r2-sdk
+	path = arch/cpu/cc26x0-cc13x0/lib/cc2640r2-sdk
 	url = https://github.com/contiki-ng/cc2640r2-sdk.git

.travis.yml

@@ -30,8 +30,10 @@ before_install:
         docker push $DOCKER_IMG;
       fi
     fi
-  # Build Cooja
-  - ant -q -f $CNG_HOST_PATH/tools/cooja/build.xml jar
+  # Build Cooja conditionally
+  - if [ ${BUILD_COOJA:-false} = true ] ; then
+      ant -q -f $CNG_HOST_PATH/tools/cooja/build.xml jar ;
+    fi
   # Set permissions for Docker mount
   - sudo chgrp -hR 1000 $CNG_HOST_PATH
 
@@ -55,14 +57,15 @@ env:
     - TEST_NAME='compile-base'
     - TEST_NAME='compile-arm-ports-01'
     - TEST_NAME='compile-arm-ports-02'
-    - TEST_NAME='rpl-lite'
-    - TEST_NAME='rpl-classic'
-    - TEST_NAME='tun-rpl-br'
+    - TEST_NAME='rpl-lite' BUILD_COOJA=true
+    - TEST_NAME='rpl-classic' BUILD_COOJA=true
+    - TEST_NAME='tun-rpl-br' BUILD_COOJA=true
     - TEST_NAME='coap-lwm2m'
-    - TEST_NAME='simulation-base'
-    - TEST_NAME='ieee802154'
+    - TEST_NAME='simulation-base' BUILD_COOJA=true
+    - TEST_NAME='ieee802154' BUILD_COOJA=true
     - TEST_NAME='compile-nxp-ports'
     - TEST_NAME='documentation'
     - TEST_NAME='compile-tools'
     - TEST_NAME='native-runs'
-    - TEST_NAME='ipv6'
+    - TEST_NAME='ipv6' BUILD_COOJA=true
+    - TEST_NAME='ipv6-nbr' BUILD_COOJA=true

Makefile.embedded

@@ -3,6 +3,9 @@
 # Future extensions to the build system that are of a similar nature (for
 # embedded devices only), can be achieved by extending this Makefile here.
 
+###
+### Targets using the tools/serial-io
+###
 RLWRAPGOALS = login serialdump serialview
 
 .PHONY: $(RLWRAPGOALS)
@@ -31,3 +34,14 @@ serialview: $(SERIAL_DUMP_BIN)
 
 login: $(SERIAL_DUMP_BIN)
 	$(SERIALDUMP) -b$(BAUDRATE) $(PORT)
+
+###
+### Targets using tools/motelist
+###
+CONTIKI_NG_MOTELIST_DIR = $(TOOLS_DIR)/motelist
+CONTIKI_NG_MOTELIST = python $(CONTIKI_NG_MOTELIST_DIR)/motelist.py
+
+.PHONY: motelist-all
+
+motelist-all:
+	$(CONTIKI_NG_MOTELIST)

Makefile.help

@@ -0,0 +1,29 @@
+usage:
+	@echo "Usage:"
+	@echo "    make [TARGET=(TARGET)] [BOARD=(BOARD)] [DEFINES=(DEFINES)] [PORT=(PORT)] [target]"
+	@echo ""
+	@echo "Typical usage:"
+	@echo "    make [TARGET=(TARGET)] [BOARD=(BOARD)] [all]"
+	@echo ""
+	@echo "    Will build Contiki-NG firmware(s) from the current example dir"
+	@echo "    for platform TARGET, board BOARD."
+	@echo ""
+	@echo "Miscellaneous targets:"
+	@echo "    targets         Prints list of supported platforms"
+	@echo "    boards          Prints a list of supported boards for TARGET"
+	@echo "    savetarget      Saves TARGET and BOARD for future invocations of make"
+	@echo "    savedefines     Saves DEFINES for future invocations of make"
+	@echo "    clean           Removes all compiled files for TARGET"
+	@echo "    distclean       Removes all compiled files for all TARGETs"
+	@echo "    viewconf        Prints Contiki-NG build configuration for TARGET"
+	@echo "    %.flashprof     Shows a Flash/ROM profile of a given firmware (e.g. hello-world.flashprof)"
+	@echo "    %.ramprof       Shows a RAM profile of a given firmware (e.g. hello-world.ramprof)"
+	@echo "    %.o             Produces an object file from a given source file (e.g. hello-world.o)"
+	@echo "    %.e             Produces the pre-processed version of a given source file (e.g. hello-world.e)"
+	@echo "    %.s             Produces an assembly file from a given source file (e.g. hello-world.s)"
+	@echo "    login           View the serial output of the device connected to PORT"
+	@echo "    serialview      Same as login, but prepend serial output with a unix timestamp"
+	@echo "    serialdump      same as serialview, but also save the output to a file"
+	@echo "    motelist-all    Prints a list of connected devices"
+
+help: usage

Makefile.include

@@ -395,34 +395,7 @@ endif
 %.flashprof: %.$(TARGET)
 	$(NM) -S -td --size-sort $< | grep -i " [t] " | cut -d' ' -f2,4
 
-usage:
-	@echo "Usage:"
-	@echo "    make [TARGET=(TARGET)] [BOARD=(BOARD)] [DEFINES=(DEFINES)] [PORT=(PORT)] [target]"
-	@echo ""
-	@echo "Typical usage:"
-	@echo "    make [TARGET=(TARGET)] [BOARD=(BOARD)] [all]"
-	@echo ""
-	@echo "    Will build Contiki-NG firmware(s) from the current example dir"
-	@echo "    for platform TARGET, board BOARD."
-	@echo ""
-	@echo "Miscellaneous targets:"
-	@echo "    targets         Prints list of supported platforms"
-	@echo "    boards          Prints a list of supported boards for TARGET"
-	@echo "    savetarget      Saves TARGET and BOARD for future invocations of make"
-	@echo "    savedefines     Saves DEFINES for future invocations of make"
-	@echo "    clean           Removes all compiled files for TARGET"
-	@echo "    distclean       Removes all compiled files for all TARGETs"
-	@echo "    viewconf        Prints Contiki-NG build configuration for TARGET"
-	@echo "    %.flashprof     Shows a Flash/ROM profile of a given firmware (e.g. hello-world.flashprof)"
-	@echo "    %.ramprof       Shows a RAM profile of a given firmware (e.g. hello-world.ramprof)"
-	@echo "    %.o             Produces an object file from a given source file (e.g. hello-world.o)"
-	@echo "    %.e             Produces the pre-processed version of a given source file (e.g. hello-world.e)"
-	@echo "    %.s             Produces an assembly file from a given source file (e.g. hello-world.s)"
-	@echo "    login           View the serial output of the device connected to PORT"
-	@echo "    serialview      Same as login, but prepend serial output with a unix timestamp"
-	@echo "    serialdump      same as serialview, but also save the output to a file"
-
-help: usage
+include $(CONTIKI)/Makefile.help
 
 targets:
 	@ls $(CONTIKI)/arch/platform $(TARGETDIRS)

arch/cpu/cc26x0-cc13x0/Makefile.cc13x0

@@ -1,7 +1,7 @@
 TI_XXWARE_PATH = lib/cc13xxware
 
-CONTIKI_CPU_SOURCEFILES += smartrf-settings.c prop-mode.c prop-mode-tx-power.c
+CONTIKI_CPU_SOURCEFILES += smartrf-settings.c prop-mode.c prop-mode-tx-power.c cc13xx-50kbps-tsch.c
 
 CFLAGS += -DCPU_FAMILY_CC13X0=1 -DCPU_FAMILY_CC13XX=1
 
-include $(CONTIKI_CPU)/Makefile.cc26xx-cc13xx
+include $(CONTIKI_CPU)/Makefile.cc26x0-cc13x0

arch/cpu/cc26x0-cc13x0/Makefile.cc26x0

@@ -2,4 +2,4 @@ TI_XXWARE_PATH = lib/cc26xxware
 
 CFLAGS += -DCPU_FAMILY_CC26X0=1 -DCPU_FAMILY_CC26XX=1
 
-include $(CONTIKI_CPU)/Makefile.cc26xx-cc13xx
+include $(CONTIKI_CPU)/Makefile.cc26x0-cc13x0

arch/cpu/cc26x0-cc13x0/Makefile.cc26x0-cc13x0

@@ -1,8 +1,8 @@
-CPU_ABS_PATH       = arch/cpu/cc26xx-cc13xx
+CPU_ABS_PATH       = arch/cpu/cc26x0-cc13x0
 TI_XXWARE = $(CONTIKI_CPU)/$(TI_XXWARE_PATH)
 
-ifeq (,$(wildcard $(TI_XXWARE)))
-    $(warning $(TI_XXWARE) does not exist.)
+ifeq (,$(wildcard $(TI_XXWARE)/*))
+    $(warning $(TI_XXWARE) does not exist or is empty.)
     $(warning Did you run 'git submodule update --init' ?)
     $(error "")
 endif

arch/cpu/cc26x0-cc13x0/Makefile.cc26x0r2f

@@ -2,4 +2,4 @@ TI_XXWARE_PATH = lib/cc2640r2-sdk
 
 CFLAGS += -DCPU_FAMILY_CC26X0R2=1 -DCPU_FAMILY_CC26XXR2=1
 
-include $(CONTIKI_CPU)/Makefile.cc26xx-cc13xx
+include $(CONTIKI_CPU)/Makefile.cc26x0-cc13x0

arch/cpu/cc26x0-cc13x0/cc13xx-cc26xx-def.h

@@ -36,12 +36,43 @@
 /*---------------------------------------------------------------------------*/
 /* TSCH related defines */
 
+/* 2 bytes header, 4 bytes CRC */
+#define CC13XX_RADIO_PHY_OVERHEAD 6
+/* 3 bytes preamble, 3 bytes sync */
+#define CC13XX_RADIO_PHY_HEADER_LEN 6
+/* The default data rate is 50 kbps */
+#define CC13XX_RADIO_BIT_RATE 50000
+
 /* 1 len byte, 2 bytes CRC */
-#define RADIO_PHY_OVERHEAD         3
-/* 250kbps data rate. One byte = 32us */
-#define RADIO_BYTE_AIR_TIME       32
+#define CC26XX_RADIO_PHY_OVERHEAD     3
+/* 4 bytes preamble, 1 byte sync */
+#define CC26XX_RADIO_PHY_HEADER_LEN   5
+/* The fixed data rate is 250 kbps */
+#define CC26XX_RADIO_BIT_RATE  250000
+
+#if CPU_FAMILY_CC13XX
+#define RADIO_PHY_HEADER_LEN CC13XX_RADIO_PHY_HEADER_LEN
+#define RADIO_PHY_OVERHEAD   CC13XX_RADIO_PHY_OVERHEAD
+#define RADIO_BIT_RATE       CC13XX_RADIO_BIT_RATE
+
+/* The TSCH default slot length of 10ms is too short, use custom one instead */
+#ifndef TSCH_CONF_DEFAULT_TIMESLOT_TIMING
+#define TSCH_CONF_DEFAULT_TIMESLOT_TIMING tsch_timing_cc13xx_50kbps
+#endif /* TSCH_CONF_DEFAULT_TIMESLOT_TIMING */
+
+/* Symbol for the custom TSCH timeslot timing template */
+#define TSCH_CONF_ARCH_HDR_PATH "rf-core/cc13xx-50kbps-tsch.h"
+
+#else
+#define RADIO_PHY_HEADER_LEN CC26XX_RADIO_PHY_HEADER_LEN
+#define RADIO_PHY_OVERHEAD   CC26XX_RADIO_PHY_OVERHEAD
+#define RADIO_BIT_RATE       CC26XX_RADIO_BIT_RATE
+#endif
+
+#define RADIO_BYTE_AIR_TIME  (1000000 / (RADIO_BIT_RATE / 8))
+
 /* Delay between GO signal and SFD */
-#define RADIO_DELAY_BEFORE_TX ((unsigned)US_TO_RTIMERTICKS(81))
+#define RADIO_DELAY_BEFORE_TX ((unsigned)US_TO_RTIMERTICKS(RADIO_PHY_HEADER_LEN * RADIO_BYTE_AIR_TIME))
 /* Delay between GO signal and start listening.
  * This value is so small because the radio is constantly on within each timeslot. */
 #define RADIO_DELAY_BEFORE_RX ((unsigned)US_TO_RTIMERTICKS(15))
@@ -56,9 +87,6 @@
 #define RADIO_TO_RTIMER(X)   ((uint32_t)(((uint64_t)(X) * (RTIMER_SECOND / 256)) / (RADIO_TIMER_SECOND / 256)))
 #define USEC_TO_RADIO(X)     ((X) * 4)
 
-/* The PHY header (preamble + SFD, 4+1 bytes) duration is equivalent to 10 symbols */
-#define RADIO_IEEE_802154_PHY_HEADER_DURATION_USEC 160
-
 /* Do not turn off TSCH within a timeslot: not enough time */
 #define TSCH_CONF_RADIO_ON_DURING_TIMESLOT 1
 

arch/cpu/cc26x0-cc13x0/ccxxware-conf.h

@@ -36,7 +36,7 @@
  * @{
  *
  * \file
- *  CCxxware-specific configuration for the cc26xx-cc13xx CPU family
+ *  CCxxware-specific configuration for the cc26x0-cc13x0 CPU family
  */
 #ifndef CCXXWARE_CONF_H_
 #define CCXXWARE_CONF_H_

arch/cpu/cc26x0-cc13x0/rf-core/ble-hal/ble-hal-cc26xx.c

@@ -386,7 +386,7 @@ on(void)
       rf_core_power_down();
       return RF_CORE_CMD_ERROR;
     }
-    rf_core_setup_interrupts(0);
+    rf_core_setup_interrupts();
     oscillators_switch_to_hf_xosc();
 
     if(rf_ble_cmd_setup_ble_mode() != RF_BLE_CMD_OK) {

arch/cpu/cc26x0-cc13x0/rf-core/cc13xx-50kbps-tsch.c

@@ -0,0 +1,73 @@
+/*
+ * Copyright (c) 2018, University of Bristol - http://www.bristol.ac.uk/
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the Institute nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * This file is part of the Contiki operating system.
+ *
+ */
+
+/**
+ * \file
+ *         IEEE 802.15.4 TSCH timeslot timings for CC13xx chips at 50kbps datarate
+ * \author
+ *         Atis Elsts <atis.elsts@bristol.ac.uk>
+ *
+ */
+
+#include "contiki.h"
+#include "net/mac/tsch/tsch.h"
+
+#define CC13XX_TSCH_DEFAULT_TS_CCA_OFFSET         1800
+#define CC13XX_TSCH_DEFAULT_TS_CCA                128
+#define CC13XX_TSCH_DEFAULT_TS_TX_OFFSET          2500
+#define CC13XX_TSCH_DEFAULT_TS_RX_OFFSET          (CC13XX_TSCH_DEFAULT_TS_TX_OFFSET - (TSCH_CONF_RX_WAIT / 2))
+#define CC13XX_TSCH_DEFAULT_TS_RX_ACK_DELAY       2000
+#define CC13XX_TSCH_DEFAULT_TS_TX_ACK_DELAY       3000
+#define CC13XX_TSCH_DEFAULT_TS_RX_WAIT            TSCH_CONF_RX_WAIT
+#define CC13XX_TSCH_DEFAULT_TS_ACK_WAIT           3000
+#define CC13XX_TSCH_DEFAULT_TS_RX_TX              192
+#define CC13XX_TSCH_DEFAULT_TS_MAX_ACK            10000
+#define CC13XX_TSCH_DEFAULT_TS_MAX_TX             21600
+
+/* Timeslot length: 40000 usec */
+#define CC13XX_TSCH_DEFAULT_TS_TIMESLOT_LENGTH  40000
+
+/* TSCH timeslot timing (microseconds) */
+const uint16_t tsch_timing_cc13xx_50kbps[tsch_ts_elements_count] = {
+  CC13XX_TSCH_DEFAULT_TS_CCA_OFFSET,
+  CC13XX_TSCH_DEFAULT_TS_CCA,
+  CC13XX_TSCH_DEFAULT_TS_TX_OFFSET,
+  CC13XX_TSCH_DEFAULT_TS_RX_OFFSET,
+  CC13XX_TSCH_DEFAULT_TS_RX_ACK_DELAY,
+  CC13XX_TSCH_DEFAULT_TS_TX_ACK_DELAY,
+  CC13XX_TSCH_DEFAULT_TS_RX_WAIT,
+  CC13XX_TSCH_DEFAULT_TS_ACK_WAIT,
+  CC13XX_TSCH_DEFAULT_TS_RX_TX,
+  CC13XX_TSCH_DEFAULT_TS_MAX_ACK,
+  CC13XX_TSCH_DEFAULT_TS_MAX_TX,
+  CC13XX_TSCH_DEFAULT_TS_TIMESLOT_LENGTH,
+};

arch/cpu/cc26x0-cc13x0/rf-core/cc13xx-50kbps-tsch.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2009, Swedish Institute of Computer Science.
+ * Copyright (c) 2018, University of Bristol - http://www.bristol.ac.uk/
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -26,24 +26,16 @@
  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  * SUCH DAMAGE.
  *
+ * This file is part of the Contiki operating system.
+ *
  */
 
-/**
- * \file
- *         A brief description of what this file is
- * \author
- *         Niclas Finne <nfi@sics.se>
- *         Joakim Eriksson <joakime@sics.se>
- */
+#ifndef CC13XX_50KBPS_TSCH_H_
+#define CC13XX_50KBPS_TSCH_H_
 
-#ifndef BRIDGE_CONF_H_
-#define BRIDGE_CONF_H_
+#include "contiki.h"
 
-#undef UIP_CONF_ROUTER
+/* TSCH timeslot timing (microseconds) */
+extern const uint16_t tsch_timing_cc13xx_50kbps[];
 
-#undef UIP_CONF_LLH_LEN
-#define UIP_CONF_LLH_LEN         14
-
-#undef UIP_CONF_BUFFER_SIZE
-#define UIP_CONF_BUFFER_SIZE  256
-#endif /* BRIDGE_CONF_H_ */
+#endif /* CC13XX_50KBPS_TSCH_H_ */

arch/cpu/cc26x0-cc13x0/rf-core/ieee-mode.c

@@ -120,6 +120,8 @@ static uint8_t rf_stats[16] = { 0 };
 /* The size of the RF commands buffer */
 #define RF_CMD_BUFFER_SIZE             128
 /*---------------------------------------------------------------------------*/
+#define RAT_TIMESTAMP_OFFSET_2_4_GHZ   0
+/*---------------------------------------------------------------------------*/
 /**
  * \brief Returns the current status of a running Radio Op command
  * \param a A pointer with the buffer used to initiate the command
@@ -130,55 +132,9 @@ static uint8_t rf_stats[16] = { 0 };
  */
 #define RF_RADIO_OP_GET_STATUS(a) (((rfc_radioOp_t *)a)->status)
 /*---------------------------------------------------------------------------*/
-/* Special value returned by CMD_IEEE_CCA_REQ when an RSSI is not available */
-#define RF_CMD_CCA_REQ_RSSI_UNKNOWN     -128
-
-/* Used for the return value of channel_clear */
-#define RF_CCA_CLEAR                       1
-#define RF_CCA_BUSY                        0
-
-/* Used as an error return value for get_cca_info */
-#define RF_GET_CCA_INFO_ERROR           0xFF
-
-/*
- * Values of the individual bits of the ccaInfo field in CMD_IEEE_CCA_REQ's
- * status struct
- */
-#define RF_CMD_CCA_REQ_CCA_STATE_IDLE      0 /* 00 */
-#define RF_CMD_CCA_REQ_CCA_STATE_BUSY      1 /* 01 */
-#define RF_CMD_CCA_REQ_CCA_STATE_INVALID   2 /* 10 */
-
-#define RF_CMD_CCA_REQ_CCA_CORR_IDLE       (0 << 4)
-#define RF_CMD_CCA_REQ_CCA_CORR_BUSY       (1 << 4)
-#define RF_CMD_CCA_REQ_CCA_CORR_INVALID    (3 << 4)
-#define RF_CMD_CCA_REQ_CCA_CORR_MASK       (3 << 4)
-
-#define RF_CMD_CCA_REQ_CCA_SYNC_BUSY       (1 << 6)
-/*---------------------------------------------------------------------------*/
 #define IEEE_MODE_CHANNEL_MIN            11
 #define IEEE_MODE_CHANNEL_MAX            26
 /*---------------------------------------------------------------------------*/
-/* How long to wait for an ongoing ACK TX to finish before starting frame TX */
-#define TX_WAIT_TIMEOUT       (RTIMER_SECOND >> 11)
-
-/* How long to wait for the RF to enter RX in rf_cmd_ieee_rx */
-#define ENTER_RX_WAIT_TIMEOUT (RTIMER_SECOND >> 10)
-
-/* How long to wait for the RF to react on CMD_ABORT: around 1 msec */
-#define RF_TURN_OFF_WAIT_TIMEOUT (RTIMER_SECOND >> 10)
-
-/* How long to wait for the RF to finish TX of a packet or an ACK */
-#define TX_FINISH_WAIT_TIMEOUT (RTIMER_SECOND >> 7)
-
-#define LIMITED_BUSYWAIT(cond, timeout) do {                         \
-    rtimer_clock_t end_time = RTIMER_NOW() + timeout;                \
-    while(cond) {                                                    \
-      if(!RTIMER_CLOCK_LT(RTIMER_NOW(), end_time)) {                 \
-        break;                                                       \
-      }                                                              \
-    }                                                                \
-  } while(0)
-/*---------------------------------------------------------------------------*/
 /* TX Power dBm lookup table - values from SmartRF Studio */
 typedef struct output_config {
   radio_value_t dbm;
@@ -211,33 +167,6 @@ static const output_config_t output_power[] = {
 /* Default TX Power - position in output_power[] */
 static const output_config_t *tx_power_current = &output_power[0];
 /*---------------------------------------------------------------------------*/
-static volatile int8_t last_rssi = 0;
-static volatile uint8_t last_corr_lqi = 0;
-
-extern int32_t rat_offset;
-
-/*---------------------------------------------------------------------------*/
-/* SFD timestamp in RTIMER ticks */
-static volatile uint32_t last_packet_timestamp = 0;
-/* SFD timestamp in RAT ticks (but 64 bits) */
-static uint64_t last_rat_timestamp64 = 0;
-
-/* For RAT overflow handling */
-static struct ctimer rat_overflow_timer;
-static volatile uint32_t rat_overflow_counter = 0;
-static rtimer_clock_t last_rat_overflow = 0;
-
-/* RAT has 32-bit register, overflows once 18 minutes */
-#define RAT_RANGE  4294967296ull
-/* approximate value */
-#define RAT_OVERFLOW_PERIOD_SECONDS (60 * 18)
-
-/* XXX: don't know what exactly is this, looks like the time to Tx 3 octets */
-#define TIMESTAMP_OFFSET  -(USEC_TO_RADIO(32 * 3) - 1) /* -95.75 usec */
-/*---------------------------------------------------------------------------*/
-/* Are we currently in poll mode? */
-static uint8_t poll_mode = 0;
-
 static rfc_CMD_IEEE_MOD_FILT_t filter_cmd;
 /*---------------------------------------------------------------------------*/
 /*
@@ -256,27 +185,28 @@ static uint8_t cmd_ieee_rx_buf[RF_CMD_BUFFER_SIZE] CC_ALIGN(4);
 #define DATA_ENTRY_LENSZ_BYTE 1
 #define DATA_ENTRY_LENSZ_WORD 2 /* 2 bytes */
 
-#define RX_BUF_SIZE 144
-/* Four receive buffers entries with room for 1 IEEE802.15.4 frame in each */
-static uint8_t rx_buf_0[RX_BUF_SIZE] CC_ALIGN(4);
-static uint8_t rx_buf_1[RX_BUF_SIZE] CC_ALIGN(4);
-static uint8_t rx_buf_2[RX_BUF_SIZE] CC_ALIGN(4);
-static uint8_t rx_buf_3[RX_BUF_SIZE] CC_ALIGN(4);
-
-#define RX_BUF_INCLUDE_CRC 1
-#define RX_BUF_INCLUDE_RSSI 1
-#define RX_BUF_INCLUDE_CORR 1
-#define RX_BUF_INCLUDE_TIMESTAMP 1
-
 /* The size of the metadata (excluding the packet length field) */
 #define RX_BUF_METADATA_SIZE \
-  (2 * RX_BUF_INCLUDE_CRC + RX_BUF_INCLUDE_RSSI + RX_BUF_INCLUDE_CORR + 4 * RX_BUF_INCLUDE_TIMESTAMP)
+  (2 * RF_CORE_RX_BUF_INCLUDE_CRC \
+      + RF_CORE_RX_BUF_INCLUDE_RSSI \
+      + RF_CORE_RX_BUF_INCLUDE_CORR \
+      + 4 * RF_CORE_RX_BUF_INCLUDE_TIMESTAMP)
 
 /* The offset of the packet length in a rx buffer */
 #define RX_BUF_LENGTH_OFFSET sizeof(rfc_dataEntry_t)
 /* The offset of the packet data in a rx buffer */
 #define RX_BUF_DATA_OFFSET (RX_BUF_LENGTH_OFFSET + 1)
 
+#define RX_BUF_SIZE (RX_BUF_DATA_OFFSET \
+      + NETSTACK_RADIO_MAX_PAYLOAD_LEN  \
+      + RX_BUF_METADATA_SIZE)
+
+/* Four receive buffers entries with room for 1 IEEE802.15.4 frame in each */
+static uint8_t rx_buf_0[RX_BUF_SIZE] CC_ALIGN(4);
+static uint8_t rx_buf_1[RX_BUF_SIZE] CC_ALIGN(4);
+static uint8_t rx_buf_2[RX_BUF_SIZE] CC_ALIGN(4);
+static uint8_t rx_buf_3[RX_BUF_SIZE] CC_ALIGN(4);
+
 /* The RX Data Queue */
 static dataQueue_t rx_data_queue = { 0 };
 
@@ -358,8 +288,8 @@ transmitting(void)
     return 0;
   }
 
-  if((cmd.currentRssi == RF_CMD_CCA_REQ_RSSI_UNKNOWN) &&
-     (cmd.ccaInfo.ccaEnergy == RF_CMD_CCA_REQ_CCA_STATE_BUSY)) {
+  if((cmd.currentRssi == RF_CORE_CMD_CCA_REQ_RSSI_UNKNOWN) &&
+     (cmd.ccaInfo.ccaEnergy == RF_CORE_CMD_CCA_REQ_CCA_STATE_BUSY)) {
     return 1;
   }
 
@@ -368,12 +298,12 @@ transmitting(void)
 /*---------------------------------------------------------------------------*/
 /**
  * \brief Returns CCA information
- * \return RF_GET_CCA_INFO_ERROR if the RF was not on
+ * \return RF_CORE_GET_CCA_INFO_ERROR if the RF was not on
  * \return On success, the return value is formatted as per the ccaInfo field
  *         of CMD_IEEE_CCA_REQ
  *
  * It is the caller's responsibility to make sure the RF is on. This function
- * will return RF_GET_CCA_INFO_ERROR if the RF is off
+ * will return RF_CORE_GET_CCA_INFO_ERROR if the RF is off
  *
  * This function will in fact wait for a valid CCA state
  */
@@ -385,20 +315,20 @@ get_cca_info(void)
 
   if(!rf_is_on()) {
     PRINTF("get_cca_info: Not on\n");
-    return RF_GET_CCA_INFO_ERROR;
+    return RF_CORE_GET_CCA_INFO_ERROR;
   }
 
   memset(&cmd, 0x00, sizeof(cmd));
-  cmd.ccaInfo.ccaState = RF_CMD_CCA_REQ_CCA_STATE_INVALID;
+  cmd.ccaInfo.ccaState = RF_CORE_CMD_CCA_REQ_CCA_STATE_INVALID;
 
-  while(cmd.ccaInfo.ccaState == RF_CMD_CCA_REQ_CCA_STATE_INVALID) {
+  while(cmd.ccaInfo.ccaState == RF_CORE_CMD_CCA_REQ_CCA_STATE_INVALID) {
     memset(&cmd, 0x00, sizeof(cmd));
     cmd.commandNo = CMD_IEEE_CCA_REQ;
 
     if(rf_core_send_cmd((uint32_t)&cmd, &cmd_status) == RF_CORE_CMD_ERROR) {
       PRINTF("get_cca_info: CMDSTA=0x%08lx\n", cmd_status);
 
-      return RF_GET_CCA_INFO_ERROR;
+      return RF_CORE_GET_CCA_INFO_ERROR;
     }
   }
 
@@ -425,14 +355,14 @@ get_rssi(void)
     was_off = 1;
     if(on() != RF_CORE_CMD_OK) {
       PRINTF("get_rssi: on() failed\n");
-      return RF_CMD_CCA_REQ_RSSI_UNKNOWN;
+      return RF_CORE_CMD_CCA_REQ_RSSI_UNKNOWN;
     }
   }
 
   memset(&cmd, 0x00, sizeof(cmd));
-  cmd.ccaInfo.ccaEnergy = RF_CMD_CCA_REQ_CCA_STATE_INVALID;
+  cmd.ccaInfo.ccaEnergy = RF_CORE_CMD_CCA_REQ_CCA_STATE_INVALID;
 
-  while(cmd.ccaInfo.ccaEnergy == RF_CMD_CCA_REQ_CCA_STATE_INVALID) {
+  while(cmd.ccaInfo.ccaEnergy == RF_CORE_CMD_CCA_REQ_CCA_STATE_INVALID) {
     memset(&cmd, 0x00, sizeof(cmd));
     cmd.commandNo = CMD_IEEE_CCA_REQ;
 
@@ -440,7 +370,7 @@ get_rssi(void)
       PRINTF("get_rssi: CMDSTA=0x%08lx\n", cmd_status);
 
       /* Make sure to return RSSI unknown */
-      cmd.currentRssi = RF_CMD_CCA_REQ_RSSI_UNKNOWN;
+      cmd.currentRssi = RF_CORE_CMD_CCA_REQ_RSSI_UNKNOWN;
       break;
     }
   }
@@ -558,8 +488,8 @@ rf_cmd_ieee_rx()
     return RF_CORE_CMD_ERROR;
   }
 
-  LIMITED_BUSYWAIT(RF_RADIO_OP_GET_STATUS(cmd_ieee_rx_buf) != RF_CORE_RADIO_OP_STATUS_ACTIVE,
-                   ENTER_RX_WAIT_TIMEOUT);
+  RTIMER_BUSYWAIT_UNTIL(RF_RADIO_OP_GET_STATUS(cmd_ieee_rx_buf) == RF_CORE_RADIO_OP_STATUS_ACTIVE,
+                        RF_CORE_ENTER_RX_TIMEOUT);
 
   /* Wait to enter RX */
   if(RF_RADIO_OP_GET_STATUS(cmd_ieee_rx_buf) != RF_CORE_RADIO_OP_STATUS_ACTIVE) {
@@ -615,11 +545,11 @@ init_rf_params(void)
   cmd->rxConfig.bAutoFlushCrc = 1;
   cmd->rxConfig.bAutoFlushIgn = 0;
   cmd->rxConfig.bIncludePhyHdr = 0;
-  cmd->rxConfig.bIncludeCrc = RX_BUF_INCLUDE_CRC;
-  cmd->rxConfig.bAppendRssi = RX_BUF_INCLUDE_RSSI;
-  cmd->rxConfig.bAppendCorrCrc = RX_BUF_INCLUDE_CORR;
+  cmd->rxConfig.bIncludeCrc = RF_CORE_RX_BUF_INCLUDE_CRC;
+  cmd->rxConfig.bAppendRssi = RF_CORE_RX_BUF_INCLUDE_RSSI;
+  cmd->rxConfig.bAppendCorrCrc = RF_CORE_RX_BUF_INCLUDE_CORR;
   cmd->rxConfig.bAppendSrcInd = 0;
-  cmd->rxConfig.bAppendTimestamp = RX_BUF_INCLUDE_TIMESTAMP;
+  cmd->rxConfig.bAppendTimestamp = RF_CORE_RX_BUF_INCLUDE_TIMESTAMP;
 
   cmd->pRxQ = &rx_data_queue;
   cmd->pOutput = (rfc_ieeeRxOutput_t *)rf_stats;
@@ -714,7 +644,7 @@ rx_off(void)
   }
 
   /* Wait for ongoing ACK TX to finish */
-  LIMITED_BUSYWAIT(transmitting(), TX_FINISH_WAIT_TIMEOUT);
+  RTIMER_BUSYWAIT_UNTIL(!transmitting(), RF_CORE_TX_FINISH_TIMEOUT);
 
   /* Send a CMD_ABORT command to RF Core */
   if(rf_core_send_cmd(CMDR_DIR_CMD(CMD_ABORT), &cmd_status) != RF_CORE_CMD_OK) {
@@ -722,7 +652,7 @@ rx_off(void)
     /* Continue nonetheless */
   }
 
-  LIMITED_BUSYWAIT(rf_is_on(), RF_TURN_OFF_WAIT_TIMEOUT);
+  RTIMER_BUSYWAIT_UNTIL(!rf_is_on(), RF_CORE_TURN_OFF_TIMEOUT);
 
   if(RF_RADIO_OP_GET_STATUS(cmd_ieee_rx_buf) == IEEE_DONE_STOPPED ||
      RF_RADIO_OP_GET_STATUS(cmd_ieee_rx_buf) == IEEE_DONE_ABORT) {
@@ -773,8 +703,8 @@ soft_off(void)
     return;
   }
 
-  LIMITED_BUSYWAIT((cmd->status & RF_CORE_RADIO_OP_MASKED_STATUS) ==
-                   RF_CORE_RADIO_OP_MASKED_STATUS_RUNNING, RF_TURN_OFF_WAIT_TIMEOUT);
+  RTIMER_BUSYWAIT_UNTIL((cmd->status & RF_CORE_RADIO_OP_MASKED_STATUS) !=
+                        RF_CORE_RADIO_OP_MASKED_STATUS_RUNNING, RF_CORE_TURN_OFF_TIMEOUT);
 }
 /*---------------------------------------------------------------------------*/
 static uint8_t
@@ -791,71 +721,10 @@ soft_on(void)
 static const rf_core_primary_mode_t mode_ieee = {
   soft_off,
   soft_on,
+  rf_is_on,
+  RAT_TIMESTAMP_OFFSET_2_4_GHZ
 };
 /*---------------------------------------------------------------------------*/
-static uint8_t
-check_rat_overflow(bool first_time)
-{
-  static uint32_t last_value;
-  uint32_t current_value;
-  uint8_t interrupts_disabled;
-
-  /* Bail out if the RF is not on */
-  if(!rf_is_on()) {
-    return 0;
-  }
-
-  interrupts_disabled = ti_lib_int_master_disable();
-  if(first_time) {
-    last_value = HWREG(RFC_RAT_BASE + RATCNT);
-  } else {
-    current_value = HWREG(RFC_RAT_BASE + RATCNT);
-    if(current_value + RAT_RANGE / 4 < last_value) {
-      /* Overflow detected */
-      last_rat_overflow = RTIMER_NOW();
-      rat_overflow_counter++;
-    }
-    last_value = current_value;
-  }
-  if(!interrupts_disabled) {
-    ti_lib_int_master_enable();
-  }
-  return 1;
-}
-/*---------------------------------------------------------------------------*/
-static void
-handle_rat_overflow(void *unused)
-{
-  uint8_t success;
-  uint8_t was_off = 0;
-
-  if(!rf_is_on()) {
-    was_off = 1;
-    if(on() != RF_CORE_CMD_OK) {
-      PRINTF("overflow: on() failed\n");
-      ctimer_set(&rat_overflow_timer, CLOCK_SECOND,
-                 handle_rat_overflow, NULL);
-      return;
-    }
-  }
-
-  success = check_rat_overflow(false);
-
-  if(was_off) {
-    off();
-  }
-
-  if(success) {
-    /* Retry after half of the interval */
-    ctimer_set(&rat_overflow_timer, RAT_OVERFLOW_PERIOD_SECONDS * CLOCK_SECOND / 2,
-               handle_rat_overflow, NULL);
-  } else {
-    /* Retry sooner */
-    ctimer_set(&rat_overflow_timer, CLOCK_SECOND,
-               handle_rat_overflow, NULL);
-  }
-}
-/*---------------------------------------------------------------------------*/
 static int
 init(void)
 {
@@ -889,9 +758,7 @@ init(void)
 
   rf_core_primary_mode_register(&mode_ieee);
 
-  check_rat_overflow(true);
-  ctimer_set(&rat_overflow_timer, RAT_OVERFLOW_PERIOD_SECONDS * CLOCK_SECOND / 2,
-             handle_rat_overflow, NULL);
+  rf_core_rat_init();
 
   process_start(&rf_core_process, NULL);
   return 1;
@@ -935,7 +802,7 @@ transmit(unsigned short transmit_len)
   do {
     tx_active = transmitting();
   } while(tx_active == 1 &&
-          (RTIMER_CLOCK_LT(RTIMER_NOW(), t0 + TX_WAIT_TIMEOUT)));
+          (RTIMER_CLOCK_LT(RTIMER_NOW(), t0 + RF_CORE_TX_TIMEOUT)));
 
   if(tx_active) {
     PRINTF("transmit: Already TXing and wait timed out\n");
@@ -957,7 +824,7 @@ transmit(unsigned short transmit_len)
   cmd.startTrigger.triggerType = TRIG_NOW;
 
   /* Enable the LAST_FG_COMMAND_DONE interrupt, which will wake us up */
-  rf_core_cmd_done_en(true, poll_mode);
+  rf_core_cmd_done_en(true);
 
   ret = rf_core_send_cmd((uint32_t)&cmd, &cmd_status);
 
@@ -973,7 +840,7 @@ transmit(unsigned short transmit_len)
        *  1) make the `lpm_sleep()` call here unconditional;
        *  2) change the radio ISR priority to allow radio ISR to interrupt rtimer ISR.
        */
-      if(!poll_mode) {
+      if(!rf_core_poll_mode) {
         lpm_sleep();
       }
     }
@@ -1007,7 +874,7 @@ transmit(unsigned short transmit_len)
    * Disable LAST_FG_COMMAND_DONE interrupt. We don't really care about it
    * except when we are transmitting
    */
-  rf_core_cmd_done_dis(poll_mode);
+  rf_core_cmd_done_dis();
 
   if(was_off) {
     off();
@@ -1036,46 +903,6 @@ release_data_entry(void)
   rx_read_entry = entry->pNextEntry;
 }
 /*---------------------------------------------------------------------------*/
-static uint32_t
-calc_last_packet_timestamp(uint32_t rat_timestamp)
-{
-  uint64_t rat_timestamp64;
-  uint32_t adjusted_overflow_counter;
-  uint8_t was_off = 0;
-
-  if(!rf_is_on()) {
-    was_off = 1;
-    on();
-  }
-
-  if(rf_is_on()) {
-    check_rat_overflow(false);
-    if(was_off) {
-      off();
-    }
-  }
-
-  adjusted_overflow_counter = rat_overflow_counter;
-
-  /* if the timestamp is large and the last oveflow was recently,
-     assume that the timestamp refers to the time before the overflow */
-  if(rat_timestamp > (uint32_t)(RAT_RANGE * 3 / 4)) {
-    if(RTIMER_CLOCK_LT(RTIMER_NOW(),
-                       last_rat_overflow + RAT_OVERFLOW_PERIOD_SECONDS * RTIMER_SECOND / 4)) {
-      adjusted_overflow_counter--;
-    }
-  }
-
-  /* add the overflowed time to the timestamp */
-  rat_timestamp64 = rat_timestamp + RAT_RANGE * adjusted_overflow_counter;
-  /* correct timestamp so that it refers to the end of the SFD */
-  rat_timestamp64 += TIMESTAMP_OFFSET;
-
-  last_rat_timestamp64 = rat_timestamp64 - rat_offset;
-
-  return RADIO_TO_RTIMER(rat_timestamp64 - rat_offset);
-}
-/*---------------------------------------------------------------------------*/
 static int
 read_frame(void *buf, unsigned short buf_len)
 {
@@ -1111,20 +938,20 @@ read_frame(void *buf, unsigned short buf_len)
 
   memcpy(buf, (uint8_t *)rx_read_entry + RX_BUF_DATA_OFFSET, len);
 
-  last_rssi = (int8_t)rx_read_entry[RX_BUF_DATA_OFFSET + len + 2];
-  last_corr_lqi = (uint8_t)rx_read_entry[RX_BUF_DATA_OFFSET + len + 3] & STATUS_CORRELATION;
+  rf_core_last_rssi = (int8_t)rx_read_entry[RX_BUF_DATA_OFFSET + len];
+  rf_core_last_corr_lqi = (uint8_t)rx_read_entry[RX_BUF_DATA_OFFSET + len + 1] & STATUS_CORRELATION;
 
   /* get the timestamp */
-  memcpy(&rat_timestamp, (uint8_t *)rx_read_entry + RX_BUF_DATA_OFFSET + len + 4, 4);
+  memcpy(&rat_timestamp, (uint8_t *)rx_read_entry + RX_BUF_DATA_OFFSET + len + 2, 4);
 
-  last_packet_timestamp = calc_last_packet_timestamp(rat_timestamp);
+  rf_core_last_packet_timestamp = rf_core_convert_rat_to_rtimer(rat_timestamp);
 
-  if(!poll_mode) {
+  if(!rf_core_poll_mode) {
     /* Not in poll mode: packetbuf should not be accessed in interrupt context.
      * In poll mode, the last packet RSSI and link quality can be obtained through
      * RADIO_PARAM_LAST_RSSI and RADIO_PARAM_LAST_LINK_QUALITY */
-    packetbuf_set_attr(PACKETBUF_ATTR_RSSI, last_rssi);
-    packetbuf_set_attr(PACKETBUF_ATTR_LINK_QUALITY, last_corr_lqi);
+    packetbuf_set_attr(PACKETBUF_ATTR_RSSI, rf_core_last_rssi);
+    packetbuf_set_attr(PACKETBUF_ATTR_LINK_QUALITY, rf_core_last_corr_lqi);
   }
 
   release_data_entry();
@@ -1137,7 +964,7 @@ channel_clear(void)
 {
   uint8_t was_off = 0;
   uint8_t cca_info;
-  int ret = RF_CCA_CLEAR;
+  int ret = RF_CORE_CCA_CLEAR;
 
   /*
    * If we are in the middle of a BLE operation, we got called by ContikiMAC
@@ -1145,7 +972,7 @@ channel_clear(void)
    */
   if(rf_ble_is_active() == RF_BLE_ACTIVE) {
     PRINTF("channel_clear: Interrupt context but BLE in progress\n");
-    return RF_CCA_CLEAR;
+    return RF_CORE_CCA_CLEAR;
   }
 
   if(rf_is_on()) {
@@ -1157,7 +984,7 @@ channel_clear(void)
      *
      * We could probably even simply return that the channel is clear
      */
-    LIMITED_BUSYWAIT(transmitting(), TX_FINISH_WAIT_TIMEOUT);
+    RTIMER_BUSYWAIT_UNTIL(!transmitting(), RF_CORE_TX_FINISH_TIMEOUT);
   } else {
     was_off = 1;
     if(on() != RF_CORE_CMD_OK) {
@@ -1165,21 +992,21 @@ channel_clear(void)
       if(was_off) {
         off();
       }
-      return RF_CCA_CLEAR;
+      return RF_CORE_CCA_CLEAR;
     }
   }
 
   cca_info = get_cca_info();
 
-  if(cca_info == RF_GET_CCA_INFO_ERROR) {
+  if(cca_info == RF_CORE_GET_CCA_INFO_ERROR) {
     PRINTF("channel_clear: CCA error\n");
-    ret = RF_CCA_CLEAR;
+    ret = RF_CORE_CCA_CLEAR;
   } else {
     /*
      * cca_info bits 1:0 - ccaStatus
      * Return 1 (clear) if idle or invalid.
      */
-    ret = (cca_info & 0x03) != RF_CMD_CCA_REQ_CCA_STATE_BUSY;
+    ret = (cca_info & 0x03) != RF_CORE_CMD_CCA_REQ_CCA_STATE_BUSY;
   }
 
   if(was_off) {
@@ -1218,12 +1045,12 @@ receiving_packet(void)
   cca_info = get_cca_info();
 
   /* If we can't read CCA info, return "not receiving" */
-  if(cca_info == RF_GET_CCA_INFO_ERROR) {
+  if(cca_info == RF_CORE_GET_CCA_INFO_ERROR) {
     return 0;
   }
 
   /* If sync has been seen, return 1 (receiving) */
-  if(cca_info & RF_CMD_CCA_REQ_CCA_SYNC_BUSY) {
+  if(cca_info & RF_CORE_CMD_CCA_REQ_CCA_SYNC_BUSY) {
     return 1;
   }
 
@@ -1241,7 +1068,7 @@ pending_packet(void)
     if(entry->status == DATA_ENTRY_STATUS_FINISHED
         || entry->status == DATA_ENTRY_STATUS_BUSY) {
       rv = 1;
-      if(!poll_mode) {
+      if(!rf_core_poll_mode) {
         process_poll(&rf_core_process);
       }
     }
@@ -1292,7 +1119,7 @@ on(void)
     return RF_CORE_CMD_ERROR;
   }
 
-  rf_core_setup_interrupts(poll_mode);
+  rf_core_setup_interrupts();
 
   if(rf_radio_setup() != RF_CORE_CMD_OK) {
     PRINTF("on: radio_setup() failed\n");
@@ -1314,7 +1141,7 @@ off(void)
     return RF_CORE_CMD_OK;
   }
 
-  LIMITED_BUSYWAIT(transmitting(), TX_FINISH_WAIT_TIMEOUT);
+  RTIMER_BUSYWAIT_UNTIL(!transmitting(), RF_CORE_TX_FINISH_TIMEOUT);
 
   /* stopping the rx explicitly results in lower sleep-mode power usage */
   rx_off();
@@ -1394,7 +1221,7 @@ get_value(radio_param_t param, radio_value_t *value)
     if(cmd->frameFiltOpt.autoAckEn) {
       *value |= RADIO_RX_MODE_AUTOACK;
     }
-    if(poll_mode) {
+    if(rf_core_poll_mode) {
       *value |= RADIO_RX_MODE_POLL_MODE;
     }
 
@@ -1411,7 +1238,7 @@ get_value(radio_param_t param, radio_value_t *value)
   case RADIO_PARAM_RSSI:
     *value = get_rssi();
 
-    if(*value == RF_CMD_CCA_REQ_RSSI_UNKNOWN) {
+    if(*value == RF_CORE_CMD_CCA_REQ_RSSI_UNKNOWN) {
       return RADIO_RESULT_ERROR;
     } else {
       return RADIO_RESULT_OK;
@@ -1429,10 +1256,25 @@ get_value(radio_param_t param, radio_value_t *value)
     *value = OUTPUT_POWER_MAX;
     return RADIO_RESULT_OK;
   case RADIO_PARAM_LAST_RSSI:
-    *value = last_rssi;
+    *value = rf_core_last_rssi;
     return RADIO_RESULT_OK;
   case RADIO_PARAM_LAST_LINK_QUALITY:
-    *value = last_corr_lqi;
+    *value = rf_core_last_corr_lqi;
+    return RADIO_RESULT_OK;
+  case RADIO_CONST_PHY_OVERHEAD:
+    *value = (radio_value_t)RADIO_PHY_OVERHEAD;
+    return RADIO_RESULT_OK;
+  case RADIO_CONST_BYTE_AIR_TIME:
+    *value = (radio_value_t)RADIO_BYTE_AIR_TIME;
+    return RADIO_RESULT_OK;
+  case RADIO_CONST_DELAY_BEFORE_TX:
+    *value = (radio_value_t)RADIO_DELAY_BEFORE_TX;
+    return RADIO_RESULT_OK;
+  case RADIO_CONST_DELAY_BEFORE_RX:
+    *value = (radio_value_t)RADIO_DELAY_BEFORE_RX;
+    return RADIO_RESULT_OK;
+  case RADIO_CONST_DELAY_BEFORE_DETECT:
+    *value = (radio_value_t)RADIO_DELAY_BEFORE_DETECT;
     return RADIO_RESULT_OK;
   default:
     return RADIO_RESULT_NOT_SUPPORTED;
@@ -1498,9 +1340,9 @@ set_value(radio_param_t param, radio_value_t value)
     cmd->frameFiltOpt.bPanCoord = 0;
     cmd->frameFiltOpt.bStrictLenFilter = 0;
 
-    old_poll_mode = poll_mode;
-    poll_mode = (value & RADIO_RX_MODE_POLL_MODE) != 0;
-    if(poll_mode == old_poll_mode) {
+    old_poll_mode = rf_core_poll_mode;
+    rf_core_poll_mode = (value & RADIO_RX_MODE_POLL_MODE) != 0;
+    if(rf_core_poll_mode == old_poll_mode) {
       uint32_t cmd_status;
 
       /* do not turn the radio on and off, just send an update command */
@@ -1552,7 +1394,7 @@ set_value(radio_param_t param, radio_value_t value)
   /* Restart the radio timer (RAT).
      This causes resynchronization between RAT and RTC: useful for TSCH. */
   if(rf_core_restart_rat() == RF_CORE_CMD_OK) {
-    check_rat_overflow(false);
+    rf_core_check_rat_overflow();
   }
 
   if(rx_on() != RF_CORE_CMD_OK) {
@@ -1590,7 +1432,7 @@ get_object(radio_param_t param, void *dest, size_t size)
     if(size != sizeof(rtimer_clock_t) || !dest) {
       return RADIO_RESULT_INVALID_VALUE;
     }
-    *(rtimer_clock_t *)dest = last_packet_timestamp;
+    *(rtimer_clock_t *)dest = rf_core_last_packet_timestamp;
 
     return RADIO_RESULT_OK;
   }

arch/cpu/cc26x0-cc13x0/rf-core/prop-mode.c

@@ -115,24 +115,6 @@
  */
 #define RF_RADIO_OP_GET_STATUS(a) GET_FIELD_V(a, radioOp, status)
 /*---------------------------------------------------------------------------*/
-/* Special value returned by CMD_IEEE_CCA_REQ when an RSSI is not available */
-#define RF_CMD_CCA_REQ_RSSI_UNKNOWN     -128
-
-/* Used for the return value of channel_clear */
-#define RF_CCA_CLEAR                       1
-#define RF_CCA_BUSY                        0
-
-/* Used as an error return value for get_cca_info */
-#define RF_GET_CCA_INFO_ERROR           0xFF
-
-/*
- * Values of the individual bits of the ccaInfo field in CMD_IEEE_CCA_REQ's
- * status struct
- */
-#define RF_CMD_CCA_REQ_CCA_STATE_IDLE      0 /* 00 */
-#define RF_CMD_CCA_REQ_CCA_STATE_BUSY      1 /* 01 */
-#define RF_CMD_CCA_REQ_CCA_STATE_INVALID   2 /* 10 */
-
 #ifdef PROP_MODE_CONF_RSSI_THRESHOLD
 #define PROP_MODE_RSSI_THRESHOLD PROP_MODE_CONF_RSSI_THRESHOLD
 #else
@@ -141,6 +123,8 @@
 
 static int8_t rssi_threshold = PROP_MODE_RSSI_THRESHOLD;
 /*---------------------------------------------------------------------------*/
+static volatile uint8_t is_receiving_packet;
+/*---------------------------------------------------------------------------*/
 static int on(void);
 static int off(void);
 
@@ -170,12 +154,6 @@ static rfc_propRxOutput_t rx_stats;
 #define DOT_4G_PHR_DW_BIT 0
 #endif
 /*---------------------------------------------------------------------------*/
-/* How long to wait for an ongoing ACK TX to finish before starting frame TX */
-#define TX_WAIT_TIMEOUT       (RTIMER_SECOND >> 11)
-
-/* How long to wait for the RF to enter RX in rf_cmd_ieee_rx */
-#define ENTER_RX_WAIT_TIMEOUT (RTIMER_SECOND >> 10)
-/*---------------------------------------------------------------------------*/
 /* TX power table for the 431-527MHz band */
 #ifdef PROP_MODE_CONF_TX_POWER_431_527
 #define PROP_MODE_TX_POWER_431_527 PROP_MODE_CONF_TX_POWER_431_527
@@ -222,12 +200,29 @@ static const prop_mode_tx_power_config_t *tx_power_current = &TX_POWER_DRIVER[1]
 #define DATA_ENTRY_LENSZ_BYTE 1
 #define DATA_ENTRY_LENSZ_WORD 2 /* 2 bytes */
 
+/* The size of the metadata (excluding the packet length field) */
+#define RX_BUF_METADATA_SIZE \
+  (CRC_LEN * RF_CORE_RX_BUF_INCLUDE_CRC \
+      + RF_CORE_RX_BUF_INCLUDE_RSSI \
+      + RF_CORE_RX_BUF_INCLUDE_CORR \
+      + 4 * RF_CORE_RX_BUF_INCLUDE_TIMESTAMP)
+
+/* The offset of the packet length in a rx buffer */
+#define RX_BUF_LENGTH_OFFSET sizeof(rfc_dataEntry_t)
+/* The offset of the packet data in a rx buffer */
+#define RX_BUF_DATA_OFFSET (RX_BUF_LENGTH_OFFSET + DOT_4G_PHR_LEN)
+
+#define ALIGN_TO_4(size)	(((size) + 3) & ~3)
+
+#define RX_BUF_SIZE ALIGN_TO_4(RX_BUF_DATA_OFFSET          \
+      + NETSTACK_RADIO_MAX_PAYLOAD_LEN   \
+      + RX_BUF_METADATA_SIZE)
+
 /*
  * RX buffers.
  * PROP_MODE_RX_BUF_CNT buffers of RX_BUF_SIZE bytes each. The start of each
  * buffer must be 4-byte aligned, therefore RX_BUF_SIZE must divide by 4
  */
-#define RX_BUF_SIZE 140
 static uint8_t rx_buf[PROP_MODE_RX_BUF_CNT][RX_BUF_SIZE] CC_ALIGN(4);
 
 /* The RX Data Queue */
@@ -236,6 +231,12 @@ static dataQueue_t rx_data_queue = { 0 };
 /* Receive entry pointer to keep track of read items */
 volatile static uint8_t *rx_read_entry;
 /*---------------------------------------------------------------------------*/
+/*
+ * Increasing this number causes unicast Tx immediately after broadcast Rx to have
+ * negative synchronization errors ("dr" in TSCH logs); decreasing it: the opposite.
+ */
+#define RAT_TIMESTAMP_OFFSET_SUB_GHZ USEC_TO_RADIO(160 * 6 - 240)
+/*---------------------------------------------------------------------------*/
 /* The outgoing frame buffer */
 #define TX_BUF_PAYLOAD_LEN 180
 #define TX_BUF_HDR_LEN       2
@@ -272,13 +273,13 @@ get_rssi(void)
     was_off = 1;
     if(on() != RF_CORE_CMD_OK) {
       PRINTF("get_rssi: on() failed\n");
-      return RF_CMD_CCA_REQ_RSSI_UNKNOWN;
+      return RF_CORE_CMD_CCA_REQ_RSSI_UNKNOWN;
     }
   }
 
-  rssi = RF_CMD_CCA_REQ_RSSI_UNKNOWN;
+  rssi = RF_CORE_CMD_CCA_REQ_RSSI_UNKNOWN;
 
-  while((rssi == RF_CMD_CCA_REQ_RSSI_UNKNOWN || rssi == 0) && ++attempts < 10) {
+  while((rssi == RF_CORE_CMD_CCA_REQ_RSSI_UNKNOWN || rssi == 0) && ++attempts < 10) {
     memset(&cmd, 0x00, sizeof(cmd));
     cmd.commandNo = CMD_GET_RSSI;
 
@@ -420,13 +421,17 @@ static uint8_t
 rf_cmd_prop_rx()
 {
   uint32_t cmd_status;
-  rtimer_clock_t t0;
   volatile rfc_CMD_PROP_RX_ADV_t *cmd_rx_adv;
   int ret;
 
   cmd_rx_adv = (rfc_CMD_PROP_RX_ADV_t *)&smartrf_settings_cmd_prop_rx_adv;
   cmd_rx_adv->status = RF_CORE_RADIO_OP_STATUS_IDLE;
 
+  cmd_rx_adv->rxConf.bIncludeCrc = RF_CORE_RX_BUF_INCLUDE_CRC;
+  cmd_rx_adv->rxConf.bAppendRssi = RF_CORE_RX_BUF_INCLUDE_RSSI;
+  cmd_rx_adv->rxConf.bAppendTimestamp = RF_CORE_RX_BUF_INCLUDE_TIMESTAMP;
+  cmd_rx_adv->rxConf.bAppendStatus = RF_CORE_RX_BUF_INCLUDE_CORR;
+
   /*
    * Set the max Packet length. This is for the payload only, therefore
    * 2047 - length offset
@@ -441,10 +446,8 @@ rf_cmd_prop_rx()
     return RF_CORE_CMD_ERROR;
   }
 
-  t0 = RTIMER_NOW();
-
-  while(cmd_rx_adv->status != RF_CORE_RADIO_OP_STATUS_ACTIVE &&
-        (RTIMER_CLOCK_LT(RTIMER_NOW(), t0 + ENTER_RX_WAIT_TIMEOUT)));
+  RTIMER_BUSYWAIT_UNTIL(cmd_rx_adv->status == RF_CORE_RADIO_OP_STATUS_ACTIVE,
+                        RF_CORE_ENTER_RX_TIMEOUT);
 
   /* Wait to enter RX */
   if(cmd_rx_adv->status != RF_CORE_RADIO_OP_STATUS_ACTIVE) {
@@ -506,13 +509,16 @@ rx_off_prop(void)
     return RF_CORE_CMD_OK;
   }
 
+  /* Wait for ongoing ACK TX to finish */
+  RTIMER_BUSYWAIT_UNTIL(!transmitting(), RF_CORE_TX_FINISH_TIMEOUT);
+
   /* Send a CMD_ABORT command to RF Core */
   if(rf_core_send_cmd(CMDR_DIR_CMD(CMD_ABORT), &cmd_status) != RF_CORE_CMD_OK) {
     PRINTF("rx_off_prop: CMD_ABORT status=0x%08lx\n", cmd_status);
     /* Continue nonetheless */
   }
 
-  while(rf_is_on());
+  RTIMER_BUSYWAIT_UNTIL(!rf_is_on(), RF_CORE_TURN_OFF_TIMEOUT);
 
   if(smartrf_settings_cmd_prop_rx_adv.status == PROP_DONE_STOPPED ||
      smartrf_settings_cmd_prop_rx_adv.status == PROP_DONE_ABORT) {
@@ -583,8 +589,8 @@ soft_off_prop(void)
     return;
   }
 
-  while((cmd->status & RF_CORE_RADIO_OP_MASKED_STATUS) ==
-        RF_CORE_RADIO_OP_MASKED_STATUS_RUNNING);
+  RTIMER_BUSYWAIT_UNTIL((cmd->status & RF_CORE_RADIO_OP_MASKED_STATUS) !=
+                         RF_CORE_RADIO_OP_MASKED_STATUS_RUNNING, RF_CORE_TURN_OFF_TIMEOUT);
 }
 /*---------------------------------------------------------------------------*/
 static uint8_t
@@ -606,6 +612,8 @@ soft_on_prop(void)
 static const rf_core_primary_mode_t mode_prop = {
   soft_off_prop,
   soft_on_prop,
+  rf_is_on,
+  RAT_TIMESTAMP_OFFSET_SUB_GHZ
 };
 /*---------------------------------------------------------------------------*/
 static int
@@ -637,10 +645,15 @@ init(void)
     return RF_CORE_CMD_ERROR;
   }
 
+  /* Enable the "sync word seen" interrupt */
+  ti_lib_rfc_hw_int_enable(RFC_DBELL_RFHWIEN_MDMSOFT);
+
   ENERGEST_ON(ENERGEST_TYPE_LISTEN);
 
   rf_core_primary_mode_register(&mode_prop);
 
+  rf_core_rat_init();
+
   process_start(&rf_core_process, NULL);
 
   return 1;
@@ -701,7 +714,7 @@ transmit(unsigned short transmit_len)
   rx_off_prop();
 
   /* Enable the LAST_COMMAND_DONE interrupt to wake us up */
-  rf_core_cmd_done_en(false, false);
+  rf_core_cmd_done_en(false);
 
   ret = rf_core_send_cmd((uint32_t)cmd_tx_adv, &cmd_status);
 
@@ -714,7 +727,14 @@ transmit(unsigned short transmit_len)
     /* Idle away while the command is running */
     while((cmd_tx_adv->status & RF_CORE_RADIO_OP_MASKED_STATUS)
           == RF_CORE_RADIO_OP_MASKED_STATUS_RUNNING) {
-      lpm_sleep();
+      /* Note: for now sleeping while Tx'ing in polling mode is disabled.
+       * To enable it:
+       *  1) make the `lpm_sleep()` call here unconditional;
+       *  2) change the radio ISR priority to allow radio ISR to interrupt rtimer ISR.
+       */
+      if(!rf_core_poll_mode) {
+        lpm_sleep();
+      }
     }
 
     if(cmd_tx_adv->status == RF_CORE_RADIO_OP_STATUS_PROP_DONE_OK) {
@@ -743,7 +763,7 @@ transmit(unsigned short transmit_len)
    * Disable LAST_FG_COMMAND_DONE interrupt. We don't really care about it
    * except when we are transmitting
    */
-  rf_core_cmd_done_dis(false);
+  rf_core_cmd_done_dis();
 
   /* Workaround. Set status to IDLE */
   cmd_tx_adv->status = RF_CORE_RADIO_OP_STATUS_IDLE;
@@ -764,47 +784,98 @@ send(const void *payload, unsigned short payload_len)
   return transmit(payload_len);
 }
 /*---------------------------------------------------------------------------*/
-static int
-read_frame(void *buf, unsigned short buf_len)
+static void
+release_data_entry(void)
 {
-  int_master_status_t status;
   rfc_dataEntryGeneral_t *entry = (rfc_dataEntryGeneral_t *)rx_read_entry;
   uint8_t *data_ptr = &entry->data;
-  int len = 0;
+  int_master_status_t interrupt_status;
 
-  if(entry->status == DATA_ENTRY_STATUS_FINISHED) {
+  /* Clear the length field (2 bytes) */
+  data_ptr[0] = 0;
+  data_ptr[1] = 0;
 
-    /*
-     * First 2 bytes in the data entry are the length.
-     * Our data entry consists of: Payload + RSSI (1 byte) + Status (1 byte)
-     * This length includes all of those.
-     */
-    len = (*(uint16_t *)data_ptr);
-    data_ptr += 2;
-    len -= 2;
+  /* Set status to 0 "Pending" in element */
+  entry->status = DATA_ENTRY_STATUS_PENDING;
+  rx_read_entry = entry->pNextEntry;
 
-    if(len > 0) {
-      if(len <= buf_len) {
-        memcpy(buf, data_ptr, len);
-      }
-
-      packetbuf_set_attr(PACKETBUF_ATTR_RSSI, (int8_t)data_ptr[len]);
-      packetbuf_set_attr(PACKETBUF_ATTR_LINK_QUALITY, 0x7F);
-    }
-
-    /* Move read entry pointer to next entry */
-    rx_read_entry = entry->pNextEntry;
-    entry->status = DATA_ENTRY_STATUS_PENDING;
-  }
-
-  status = critical_enter();
-  if(rx_is_full) {
-    rx_is_full = false;
+  interrupt_status = critical_enter();
+  if(rf_core_rx_is_full) {
+    rf_core_rx_is_full = false;
     PRINTF("RXQ was full, re-enabling radio!\n");
     rx_on_prop();
   }
-  critical_exit(status);
-    
+  critical_exit(interrupt_status);
+
+}
+/*---------------------------------------------------------------------------*/
+static int
+read_frame(void *buf, unsigned short buf_len)
+{
+  rfc_dataEntryGeneral_t *entry = (rfc_dataEntryGeneral_t *)rx_read_entry;
+  uint8_t *data_ptr = &entry->data;
+  int len = 0;
+  uint32_t rat_timestamp;
+
+  /* wait for entry to become finished */
+  rtimer_clock_t t0 = RTIMER_NOW();
+  while(entry->status == DATA_ENTRY_STATUS_BUSY
+      && RTIMER_CLOCK_LT(RTIMER_NOW(), t0 + (RTIMER_SECOND / 50)));
+
+  /* Make sure the flag is reset */
+  is_receiving_packet = 0;
+
+  if(entry->status != DATA_ENTRY_STATUS_FINISHED) {
+    /* No available data */
+    return 0;
+  }
+
+  /*
+   * First 2 bytes in the data entry are the length.
+   * Our data entry consists of:
+   *   Payload + RSSI (1 byte) + Timestamp (4 bytes) + Status (1 byte)
+   * This length includes all of those.
+   */
+  len = (*(uint16_t *)data_ptr);
+
+  if(len <= RX_BUF_METADATA_SIZE) {
+    PRINTF("RF: too short!");
+
+    release_data_entry();
+    return 0;
+  }
+
+  data_ptr += 2;
+  len -= RX_BUF_METADATA_SIZE;
+
+  if(len > buf_len) {
+    PRINTF("RF: too long\n");
+
+    release_data_entry();
+    return 0;
+  }
+
+  memcpy(buf, data_ptr, len);
+
+  /* get the RSSI and status */
+  rf_core_last_rssi = (int8_t)data_ptr[len];
+  rf_core_last_corr_lqi = data_ptr[len + 5];
+
+  /* get the timestamp */
+  memcpy(&rat_timestamp, data_ptr + len + 1, 4);
+
+  rf_core_last_packet_timestamp = rf_core_convert_rat_to_rtimer(rat_timestamp);
+
+  if(!rf_core_poll_mode) {
+    /* Not in poll mode: packetbuf should not be accessed in interrupt context.
+     * In poll mode, the last packet RSSI and link quality can be obtained through
+     * RADIO_PARAM_LAST_RSSI and RADIO_PARAM_LAST_LINK_QUALITY */
+    packetbuf_set_attr(PACKETBUF_ATTR_RSSI, rf_core_last_rssi);
+    packetbuf_set_attr(PACKETBUF_ATTR_LINK_QUALITY, rf_core_last_corr_lqi);
+  }
+
+  release_data_entry();
+
   return len;
 }
 /*---------------------------------------------------------------------------*/
@@ -813,14 +884,14 @@ channel_clear(void)
 {
   uint8_t was_off = 0;
   uint32_t cmd_status;
-  int8_t rssi = RF_CMD_CCA_REQ_RSSI_UNKNOWN;
+  int8_t rssi = RF_CORE_CMD_CCA_REQ_RSSI_UNKNOWN;
 
   /*
    * If we are in the middle of a BLE operation, we got called by ContikiMAC
    * from within an interrupt context. Indicate a clear channel
    */
   if(rf_ble_is_active() == RF_BLE_ACTIVE) {
-    return RF_CCA_CLEAR;
+    return RF_CORE_CCA_CLEAR;
   }
 
   if(!rf_core_is_accessible()) {
@@ -830,16 +901,16 @@ channel_clear(void)
       if(was_off) {
         off();
       }
-      return RF_CCA_CLEAR;
+      return RF_CORE_CCA_CLEAR;
     }
   } else {
     if(transmitting()) {
       PRINTF("channel_clear: called while in TX\n");
-      return RF_CCA_CLEAR;
+      return RF_CORE_CCA_CLEAR;
     }
   }
 
-  while(rssi == RF_CMD_CCA_REQ_RSSI_UNKNOWN || rssi == 0) {
+  while(rssi == RF_CORE_CMD_CCA_REQ_RSSI_UNKNOWN || rssi == 0) {
     if(rf_core_send_cmd(CMDR_DIR_CMD(CMD_GET_RSSI), &cmd_status)
        != RF_CORE_CMD_OK) {
       break;
@@ -853,10 +924,10 @@ channel_clear(void)
   }
 
   if(rssi >= rssi_threshold) {
-    return RF_CCA_BUSY;
+    return RF_CORE_CCA_BUSY;
   }
 
-  return RF_CCA_CLEAR;
+  return RF_CORE_CCA_CLEAR;
 }
 /*---------------------------------------------------------------------------*/
 static int
@@ -866,11 +937,23 @@ receiving_packet(void)
     return 0;
   }
 
-  if(channel_clear() == RF_CCA_CLEAR) {
-    return 0;
+  if(!is_receiving_packet) {
+    /* Look for the modem synchronization word detection interrupt flag.
+     * This flag is raised when the synchronization word is received.
+     */
+    if(HWREG(RFC_DBELL_BASE + RFC_DBELL_O_RFHWIFG) & RFC_DBELL_RFHWIFG_MDMSOFT) {
+      is_receiving_packet = 1;
+    }
+  } else {
+    /* After the start of the packet: reset the Rx flag once the channel gets clear */
+    is_receiving_packet = (channel_clear() == RF_CORE_CCA_BUSY);
+    if(!is_receiving_packet) {
+      /* Clear the modem sync flag */
+      ti_lib_rfc_hw_int_clear(RFC_DBELL_RFHWIFG_MDMSOFT);
+    }
   }
 
-  return 1;
+  return is_receiving_packet;
 }
 /*---------------------------------------------------------------------------*/
 static int
@@ -881,9 +964,12 @@ pending_packet(void)
 
   /* Go through all RX buffers and check their status */
   do {
-    if(entry->status == DATA_ENTRY_STATUS_FINISHED) {
-      rv += 1;
-      process_poll(&rf_core_process);
+    if(entry->status == DATA_ENTRY_STATUS_FINISHED
+        || entry->status == DATA_ENTRY_STATUS_BUSY) {
+      rv = 1;
+      if(!rf_core_poll_mode) {
+        process_poll(&rf_core_process);
+      }
     }
 
     entry = (rfc_dataEntry_t *)entry->pNextEntry;
@@ -904,18 +990,18 @@ on(void)
     return RF_CORE_CMD_OK;
   }
 
-  /*
-   * Request the HF XOSC as the source for the HF clock. Needed before we can
-   * use the FS. This will only request, it will _not_ perform the switch.
-   */
-  oscillators_request_hf_xosc();
-
   if(rf_is_on()) {
     PRINTF("on: We were on. PD=%u, RX=0x%04x \n", rf_core_is_accessible(),
            smartrf_settings_cmd_prop_rx_adv.status);
     return RF_CORE_CMD_OK;
   }
 
+  /*
+   * Request the HF XOSC as the source for the HF clock. Needed before we can
+   * use the FS. This will only request, it will _not_ perform the switch.
+   */
+  oscillators_request_hf_xosc();
+
   if(!rf_core_is_accessible()) {
     if(rf_core_power_up() != RF_CORE_CMD_OK) {
       PRINTF("on: rf_core_power_up() failed\n");
@@ -958,7 +1044,7 @@ on(void)
     }
   }
 
-  rf_core_setup_interrupts(false);
+  rf_core_setup_interrupts();
 
   init_rx_buffers();
 
@@ -985,6 +1071,9 @@ on(void)
 static int
 off(void)
 {
+  int i;
+  rfc_dataEntry_t *entry;
+
   /*
    * If we are in the middle of a BLE operation, we got called by ContikiMAC
    * from within an interrupt context. Abort, but pretend everything is OK.
@@ -998,15 +1087,39 @@ off(void)
 
   ENERGEST_OFF(ENERGEST_TYPE_LISTEN);
 
+#if !CC2650_FAST_RADIO_STARTUP
   /* Switch HF clock source to the RCOSC to preserve power */
   oscillators_switch_to_hf_rc();
+#endif
 
   /* We pulled the plug, so we need to restore the status manually */
   smartrf_settings_cmd_prop_rx_adv.status = RF_CORE_RADIO_OP_STATUS_IDLE;
 
+  /*
+   * Just in case there was an ongoing RX (which started after we begun the
+   * shutdown sequence), we don't want to leave the buffer in state == ongoing
+   */
+  for(i = 0; i < PROP_MODE_RX_BUF_CNT; i++) {
+    entry = (rfc_dataEntry_t *)rx_buf[i];
+    if(entry->status == DATA_ENTRY_STATUS_BUSY) {
+       entry->status = DATA_ENTRY_STATUS_PENDING;
+    }
+  }
+
   return RF_CORE_CMD_OK;
 }
 /*---------------------------------------------------------------------------*/
+/* Enable or disable CCA before sending */
+static radio_result_t
+set_send_on_cca(uint8_t enable)
+{
+  if(enable) {
+    /* this driver does not have support for CCA on Tx */
+    return RADIO_RESULT_NOT_SUPPORTED;
+  }
+  return RADIO_RESULT_OK;
+}
+/*---------------------------------------------------------------------------*/
 static radio_result_t
 get_value(radio_param_t param, radio_value_t *value)
 {
@@ -1022,6 +1135,15 @@ get_value(radio_param_t param, radio_value_t *value)
   case RADIO_PARAM_CHANNEL:
     *value = (radio_value_t)get_channel();
     return RADIO_RESULT_OK;
+  case RADIO_PARAM_RX_MODE:
+    *value = 0;
+    if(rf_core_poll_mode) {
+      *value |= RADIO_RX_MODE_POLL_MODE;
+    }
+    return RADIO_RESULT_OK;
+  case RADIO_PARAM_TX_MODE:
+    *value = 0;
+    return RADIO_RESULT_OK;
   case RADIO_PARAM_TXPOWER:
     *value = get_tx_power();
     return RADIO_RESULT_OK;
@@ -1031,7 +1153,7 @@ get_value(radio_param_t param, radio_value_t *value)
   case RADIO_PARAM_RSSI:
     *value = get_rssi();
 
-    if(*value == RF_CMD_CCA_REQ_RSSI_UNKNOWN) {
+    if(*value == RF_CORE_CMD_CCA_REQ_RSSI_UNKNOWN) {
       return RADIO_RESULT_ERROR;
     } else {
       return RADIO_RESULT_OK;
@@ -1048,6 +1170,28 @@ get_value(radio_param_t param, radio_value_t *value)
   case RADIO_CONST_TXPOWER_MAX:
     *value = OUTPUT_POWER_MAX;
     return RADIO_RESULT_OK;
+  case RADIO_PARAM_LAST_RSSI:
+    *value = rf_core_last_rssi;
+    return RADIO_RESULT_OK;
+  case RADIO_PARAM_LAST_LINK_QUALITY:
+    *value = rf_core_last_corr_lqi;
+    return RADIO_RESULT_OK;
+  case RADIO_CONST_PHY_OVERHEAD:
+    /* 2 header bytes, 2 or 4 bytes CRC */
+    *value = (radio_value_t)(DOT_4G_PHR_LEN + CRC_LEN);
+    return RADIO_RESULT_OK;
+  case RADIO_CONST_BYTE_AIR_TIME:
+    *value = (radio_value_t)RADIO_BYTE_AIR_TIME;
+    return RADIO_RESULT_OK;
+  case RADIO_CONST_DELAY_BEFORE_TX:
+    *value = (radio_value_t)RADIO_DELAY_BEFORE_TX;
+    return RADIO_RESULT_OK;
+  case RADIO_CONST_DELAY_BEFORE_RX:
+    *value = (radio_value_t)RADIO_DELAY_BEFORE_RX;
+    return RADIO_RESULT_OK;
+  case RADIO_CONST_DELAY_BEFORE_DETECT:
+    *value = (radio_value_t)RADIO_DELAY_BEFORE_DETECT;
+    return RADIO_RESULT_OK;
   default:
     return RADIO_RESULT_NOT_SUPPORTED;
   }
@@ -1056,8 +1200,8 @@ get_value(radio_param_t param, radio_value_t *value)
 static radio_result_t
 set_value(radio_param_t param, radio_value_t value)
 {
-  uint8_t was_off = 0;
   radio_result_t rv = RADIO_RESULT_OK;
+  uint8_t old_poll_mode;
 
   switch(param) {
   case RADIO_PARAM_POWER_MODE:
@@ -1087,6 +1231,25 @@ set_value(radio_param_t param, radio_value_t value)
 
     set_channel((uint8_t)value);
     break;
+
+  case RADIO_PARAM_RX_MODE:
+    if(value & ~(RADIO_RX_MODE_POLL_MODE)) {
+      return RADIO_RESULT_INVALID_VALUE;
+    }
+
+    old_poll_mode = rf_core_poll_mode;
+    rf_core_poll_mode = (value & RADIO_RX_MODE_POLL_MODE) != 0;
+    if(rf_core_poll_mode == old_poll_mode) {
+      return RADIO_RESULT_OK;
+    }
+    break;
+
+  case RADIO_PARAM_TX_MODE:
+    if(value & ~(RADIO_TX_MODE_SEND_ON_CCA)) {
+      return RADIO_RESULT_INVALID_VALUE;
+    }
+    return set_send_on_cca((value & RADIO_TX_MODE_SEND_ON_CCA) != 0);
+
   case RADIO_PARAM_TXPOWER:
     if(value < TX_POWER_DRIVER[get_tx_power_array_last_element()].dbm ||
        value > OUTPUT_POWER_MAX) {
@@ -1103,8 +1266,7 @@ set_value(radio_param_t param, radio_value_t value)
     }
 
     return RADIO_RESULT_OK;
-  case RADIO_PARAM_RX_MODE:
-    return RADIO_RESULT_OK;
+
   case RADIO_PARAM_CCA_THRESHOLD:
     rssi_threshold = (int8_t)value;
     break;
@@ -1112,28 +1274,29 @@ set_value(radio_param_t param, radio_value_t value)
     return RADIO_RESULT_NOT_SUPPORTED;
   }
 
-  /* If we reach here we had no errors. Apply new settings */
+  /* If off, the new configuration will be applied the next time radio is started */
   if(!rf_is_on()) {
-    was_off = 1;
-    if(on() != RF_CORE_CMD_OK) {
-      PRINTF("set_value: on() failed (2)\n");
-      return RADIO_RESULT_ERROR;
-    }
+    return RADIO_RESULT_OK;
   }
 
+  /* If we reach here we had no errors. Apply new settings */
   if(rx_off_prop() != RF_CORE_CMD_OK) {
     PRINTF("set_value: rx_off_prop() failed\n");
     rv = RADIO_RESULT_ERROR;
   }
 
-  if(soft_on_prop() != RF_CORE_CMD_OK) {
-    PRINTF("set_value: rx_on_prop() failed\n");
-    rv = RADIO_RESULT_ERROR;
+  /* Restart the radio timer (RAT).
+     This causes resynchronization between RAT and RTC: useful for TSCH. */
+  if(rf_core_restart_rat() != RF_CORE_CMD_OK) {
+    PRINTF("set_value: rf_core_restart_rat() failed\n");
+    /* do not set the error */
+  } else {
+    rf_core_check_rat_overflow();
   }
 
-  /* If we were off, turn back off */
-  if(was_off) {
-    off();
+  if(soft_on_prop() != RF_CORE_CMD_OK) {
+    PRINTF("set_value: soft_on_prop() failed\n");
+    rv = RADIO_RESULT_ERROR;
   }
 
   return rv;
@@ -1142,6 +1305,15 @@ set_value(radio_param_t param, radio_value_t value)
 static radio_result_t
 get_object(radio_param_t param, void *dest, size_t size)
 {
+  if(param == RADIO_PARAM_LAST_PACKET_TIMESTAMP) {
+    if(size != sizeof(rtimer_clock_t) || !dest) {
+      return RADIO_RESULT_INVALID_VALUE;
+    }
+    *(rtimer_clock_t *)dest = rf_core_last_packet_timestamp;
+
+    return RADIO_RESULT_OK;
+  }
+
   return RADIO_RESULT_NOT_SUPPORTED;
 }
 /*---------------------------------------------------------------------------*/

arch/cpu/cc26x0-cc13x0/rf-core/rf-core.c

@@ -99,12 +99,37 @@ static rfc_radioOp_t *last_radio_op = NULL;
 /* A struct holding pointers to the primary mode's abort() and restore() */
 static const rf_core_primary_mode_t *primary_mode = NULL;
 /*---------------------------------------------------------------------------*/
+/* RAT has 32-bit register, overflows once 18 minutes */
+#define RAT_RANGE  4294967296ull
+/* approximate value */
+#define RAT_OVERFLOW_PERIOD_SECONDS (60 * 18)
+
+/* how often to check for the overflow, as a minimum */
+#define RAT_OVERFLOW_TIMER_INTERVAL (CLOCK_SECOND * RAT_OVERFLOW_PERIOD_SECONDS / 3)
+
 /* Radio timer (RAT) offset as compared to the rtimer counter (RTC) */
-int32_t rat_offset = 0;
-static bool rat_offset_known = false;
+static int32_t rat_offset;
+static bool rat_offset_known;
+
+/* Value during the last read of the RAT register */
+static uint32_t rat_last_value;
+
+/* For RAT overflow handling */
+static struct ctimer rat_overflow_timer;
+static volatile uint32_t rat_overflow_counter;
+static rtimer_clock_t rat_last_overflow;
+
+static void rat_overflow_check_timer_cb(void *);
+/*---------------------------------------------------------------------------*/
+volatile int8_t rf_core_last_rssi = RF_CORE_CMD_CCA_REQ_RSSI_UNKNOWN;
+volatile uint8_t rf_core_last_corr_lqi = 0;
+volatile uint32_t rf_core_last_packet_timestamp = 0;
+/*---------------------------------------------------------------------------*/
+/* Are we currently in poll mode? */
+uint8_t rf_core_poll_mode = 0;
 /*---------------------------------------------------------------------------*/
 /* Buffer full flag */
-volatile bool rx_is_full = false;
+volatile bool rf_core_rx_is_full = false;
 /*---------------------------------------------------------------------------*/
 PROCESS(rf_core_process, "CC13xx / CC26xx RF driver");
 /*---------------------------------------------------------------------------*/
@@ -451,10 +476,10 @@ rf_core_restart_rat(void)
 }
 /*---------------------------------------------------------------------------*/
 void
-rf_core_setup_interrupts(bool poll_mode)
+rf_core_setup_interrupts(void)
 {
   bool interrupts_disabled;
-  const uint32_t enabled_irqs = poll_mode ? ENABLED_IRQS_POLL_MODE : ENABLED_IRQS;
+  const uint32_t enabled_irqs = rf_core_poll_mode ? ENABLED_IRQS_POLL_MODE : ENABLED_IRQS;
 
   /* We are already turned on by the caller, so this should not happen */
   if(!rf_core_is_accessible()) {
@@ -485,19 +510,23 @@ rf_core_setup_interrupts(bool poll_mode)
 }
 /*---------------------------------------------------------------------------*/
 void
-rf_core_cmd_done_en(bool fg, bool poll_mode)
+rf_core_cmd_done_en(bool fg)
 {
-  uint32_t irq = fg ? IRQ_LAST_FG_COMMAND_DONE : IRQ_LAST_COMMAND_DONE;
-  const uint32_t enabled_irqs = poll_mode ? ENABLED_IRQS_POLL_MODE : ENABLED_IRQS;
+  uint32_t irq = 0;
+  const uint32_t enabled_irqs = rf_core_poll_mode ? ENABLED_IRQS_POLL_MODE : ENABLED_IRQS;
+
+  if(!rf_core_poll_mode) {
+    irq = fg ? IRQ_LAST_FG_COMMAND_DONE : IRQ_LAST_COMMAND_DONE;
+  }
 
   HWREG(RFC_DBELL_NONBUF_BASE + RFC_DBELL_O_RFCPEIFG) = enabled_irqs;
   HWREG(RFC_DBELL_NONBUF_BASE + RFC_DBELL_O_RFCPEIEN) = enabled_irqs | irq;
 }
 /*---------------------------------------------------------------------------*/
 void
-rf_core_cmd_done_dis(bool poll_mode)
+rf_core_cmd_done_dis(void)
 {
-  const uint32_t enabled_irqs = poll_mode ? ENABLED_IRQS_POLL_MODE : ENABLED_IRQS;
+  const uint32_t enabled_irqs = rf_core_poll_mode ? ENABLED_IRQS_POLL_MODE : ENABLED_IRQS;
   HWREG(RFC_DBELL_NONBUF_BASE + RFC_DBELL_O_RFCPEIEN) = enabled_irqs;
 }
 /*---------------------------------------------------------------------------*/
@@ -544,6 +573,123 @@ rf_core_primary_mode_restore()
   return RF_CORE_CMD_ERROR;
 }
 /*---------------------------------------------------------------------------*/
+uint8_t
+rf_core_rat_init(void)
+{
+  rat_last_value = HWREG(RFC_RAT_BASE + RATCNT);
+
+  ctimer_set(&rat_overflow_timer, RAT_OVERFLOW_TIMER_INTERVAL,
+             rat_overflow_check_timer_cb, NULL);
+
+  return 1;
+}
+/*---------------------------------------------------------------------------*/
+uint8_t
+rf_core_check_rat_overflow(void)
+{
+  uint32_t rat_current_value;
+  uint8_t interrupts_disabled;
+
+  /* Bail out if the RF is not on */
+  if(primary_mode == NULL || !primary_mode->is_on()) {
+    return 0;
+  }
+
+  interrupts_disabled = ti_lib_int_master_disable();
+
+  rat_current_value = HWREG(RFC_RAT_BASE + RATCNT);
+  if(rat_current_value + RAT_RANGE / 4 < rat_last_value) {
+    /* Overflow detected */
+    rat_last_overflow = RTIMER_NOW();
+    rat_overflow_counter++;
+  }
+  rat_last_value = rat_current_value;
+
+  if(!interrupts_disabled) {
+    ti_lib_int_master_enable();
+  }
+
+  return 1;
+}
+/*---------------------------------------------------------------------------*/
+static void
+rat_overflow_check_timer_cb(void *unused)
+{
+  uint8_t success = 0;
+  uint8_t was_off = 0;
+
+  if(primary_mode != NULL) {
+
+    if(!primary_mode->is_on()) {
+      was_off = 1;
+      if(NETSTACK_RADIO.on() != RF_CORE_CMD_OK) {
+        PRINTF("overflow: on() failed\n");
+        ctimer_set(&rat_overflow_timer, CLOCK_SECOND,
+                   rat_overflow_check_timer_cb, NULL);
+        return;
+      }
+    }
+
+    success = rf_core_check_rat_overflow();
+
+    if(was_off) {
+      NETSTACK_RADIO.off();
+    }
+  }
+
+  if(success) {
+    /* Retry after half of the interval */
+    ctimer_set(&rat_overflow_timer, RAT_OVERFLOW_TIMER_INTERVAL,
+               rat_overflow_check_timer_cb, NULL);
+  } else {
+    /* Retry sooner */
+    ctimer_set(&rat_overflow_timer, CLOCK_SECOND,
+               rat_overflow_check_timer_cb, NULL);
+  }
+}
+/*---------------------------------------------------------------------------*/
+uint32_t
+rf_core_convert_rat_to_rtimer(uint32_t rat_timestamp)
+{
+  uint64_t rat_timestamp64;
+  uint32_t adjusted_overflow_counter;
+  uint8_t was_off = 0;
+
+  if(primary_mode == NULL) {
+    PRINTF("rf_core_convert_rat_to_rtimer: not initialized\n");
+    return 0;
+  }
+
+  if(!primary_mode->is_on()) {
+    was_off = 1;
+    NETSTACK_RADIO.on();
+  }
+
+  rf_core_check_rat_overflow();
+
+  if(was_off) {
+    NETSTACK_RADIO.off();
+  }
+
+  adjusted_overflow_counter = rat_overflow_counter;
+
+  /* if the timestamp is large and the last oveflow was recently,
+     assume that the timestamp refers to the time before the overflow */
+  if(rat_timestamp > (uint32_t)(RAT_RANGE * 3 / 4)) {
+    if(RTIMER_CLOCK_LT(RTIMER_NOW(),
+                       rat_last_overflow + RAT_OVERFLOW_PERIOD_SECONDS * RTIMER_SECOND / 4)) {
+      adjusted_overflow_counter--;
+    }
+  }
+
+  /* add the overflowed time to the timestamp */
+  rat_timestamp64 = rat_timestamp + RAT_RANGE * adjusted_overflow_counter;
+  /* correct timestamp so that it refers to the end of the SFD */
+  rat_timestamp64 += primary_mode->sfd_timestamp_offset;
+
+  return RADIO_TO_RTIMER(rat_timestamp64 - rat_offset);
+}
+/*---------------------------------------------------------------------------*/
 PROCESS_THREAD(rf_core_process, ev, data)
 {
   int len;
@@ -582,11 +728,11 @@ cc26xx_rf_cpe1_isr(void)
       return;
     }
   }
-    
+
   if(HWREG(RFC_DBELL_NONBUF_BASE + RFC_DBELL_O_RFCPEIFG) & IRQ_RX_BUF_FULL) {
     PRINTF("\nRF: BUF_FULL\n\n");
     /* set a flag that the buffer is full*/
-    rx_is_full = true;
+    rf_core_rx_is_full = true;
     /* make sure read_frame() will be called to make space in RX buffer */
     process_poll(&rf_core_process);
     /* Clear the IRQ_RX_BUF_FULL interrupt flag by writing zero to bit */

arch/cpu/cc26x0-cc13x0/rf-core/rf-core.h

@@ -133,6 +133,17 @@ typedef struct rf_core_primary_mode_s {
    * \return RF_CORE_CMD_OK or RF_CORE_CMD_ERROR
    */
   uint8_t (*restore)(void);
+
+  /**
+   * \brief A pointer to a function that checks if the radio is on
+   * \return 1 or 0
+   */
+  uint8_t (*is_on)(void);
+
+  /**
+   * \brief Offset of the end of SFD when compared to the radio HW-generated timestamp
+   */
+   int16_t sfd_timestamp_offset;
 } rf_core_primary_mode_t;
 /*---------------------------------------------------------------------------*/
 /* RF Command status constants - Correspond to values in the CMDSTA register */
@@ -263,12 +274,65 @@ typedef struct rf_core_primary_mode_s {
 /* Radio timer register */
 #define RATCNT  0x00000004
 /*---------------------------------------------------------------------------*/
-/* Buffer full flag */
-extern volatile bool rx_is_full;
+/* Special value returned by CMD_IEEE_CCA_REQ when an RSSI is not available */
+#define RF_CORE_CMD_CCA_REQ_RSSI_UNKNOWN     -128
+
+/* Used for the return value of channel_clear */
+#define RF_CORE_CCA_CLEAR                       1
+#define RF_CORE_CCA_BUSY                        0
+
+/* Used as an error return value for get_cca_info */
+#define RF_CORE_GET_CCA_INFO_ERROR           0xFF
+
+/*
+ * Values of the individual bits of the ccaInfo field in CMD_IEEE_CCA_REQ's
+ * status struct
+ */
+#define RF_CORE_CMD_CCA_REQ_CCA_STATE_IDLE      0 /* 00 */
+#define RF_CORE_CMD_CCA_REQ_CCA_STATE_BUSY      1 /* 01 */
+#define RF_CORE_CMD_CCA_REQ_CCA_STATE_INVALID   2 /* 10 */
+
+#define RF_CORE_CMD_CCA_REQ_CCA_CORR_IDLE       (0 << 4)
+#define RF_CORE_CMD_CCA_REQ_CCA_CORR_BUSY       (1 << 4)
+#define RF_CORE_CMD_CCA_REQ_CCA_CORR_INVALID    (3 << 4)
+#define RF_CORE_CMD_CCA_REQ_CCA_CORR_MASK       (3 << 4)
+
+#define RF_CORE_CMD_CCA_REQ_CCA_SYNC_BUSY       (1 << 6)
+/*---------------------------------------------------------------------------*/
+#define RF_CORE_RX_BUF_INCLUDE_CRC 0
+#define RF_CORE_RX_BUF_INCLUDE_RSSI 1
+#define RF_CORE_RX_BUF_INCLUDE_CORR 1
+#define RF_CORE_RX_BUF_INCLUDE_TIMESTAMP 1
+/*---------------------------------------------------------------------------*/
+/* How long to wait for an ongoing ACK TX to finish before starting frame TX */
+#define RF_CORE_TX_TIMEOUT       (RTIMER_SECOND >> 11)
+
+/* How long to wait for the RF to enter RX in rf_cmd_ieee_rx */
+#define RF_CORE_ENTER_RX_TIMEOUT (RTIMER_SECOND >> 10)
+
+/* How long to wait for the RF to react on CMD_ABORT: around 1 msec */
+#define RF_CORE_TURN_OFF_TIMEOUT (RTIMER_SECOND >> 10)
+
+/* How long to wait for the RF to finish TX of a packet or an ACK */
+#define RF_CORE_TX_FINISH_TIMEOUT (RTIMER_SECOND >> 7)
+
 /*---------------------------------------------------------------------------*/
 /* Make the main driver process visible to mode drivers */
 PROCESS_NAME(rf_core_process);
 /*---------------------------------------------------------------------------*/
+/* Buffer full flag */
+extern volatile bool rf_core_rx_is_full;
+/*---------------------------------------------------------------------------*/
+/* RSSI of the last read frame */
+extern volatile int8_t rf_core_last_rssi;
+/* Correlation/LQI of the last read frame */
+extern volatile uint8_t rf_core_last_corr_lqi;
+/* SFD timestamp of the last read frame, in rtimer ticks */
+extern volatile uint32_t rf_core_last_packet_timestamp;
+/*---------------------------------------------------------------------------*/
+/* Are we currently in poll mode? */
+extern uint8_t rf_core_poll_mode;
+/*---------------------------------------------------------------------------*/
 /**
  * \brief Check whether the RF core is accessible
  * \retval RF_CORE_ACCESSIBLE The core is powered and ready for access
@@ -383,20 +447,19 @@ uint8_t rf_core_boot(void);
 /**
  * \brief Setup RF core interrupts
  */
-void rf_core_setup_interrupts(bool poll_mode);
+void rf_core_setup_interrupts(void);
 
 /**
  * \brief Enable interrupt on command done.
  * \param fg set true to enable irq on foreground command done and false for
  * background commands or if not in ieee mode.
- * \param poll_mode true if the driver is in poll mode
  *
  * This is used within TX routines in order to be able to sleep the CM3 and
  * wake up after TX has finished
  *
  * \sa rf_core_cmd_done_dis()
  */
-void rf_core_cmd_done_en(bool fg, bool poll_mode);
+void rf_core_cmd_done_en(bool fg);
 
 /**
  * \brief Disable the LAST_CMD_DONE and LAST_FG_CMD_DONE interrupts.
@@ -405,7 +468,7 @@ void rf_core_cmd_done_en(bool fg, bool poll_mode);
  *
  * \sa rf_core_cmd_done_en()
  */
-void rf_core_cmd_done_dis(bool poll_mode);
+void rf_core_cmd_done_dis(void);
 
 /**
  * \brief Returns a pointer to the most recent proto-dependent Radio Op
@@ -467,6 +530,22 @@ void rf_core_primary_mode_abort(void);
  * \brief Abort the currently running primary radio op
  */
 uint8_t rf_core_primary_mode_restore(void);
+
+/**
+ * \brief Initialize the RAT to RTC conversion machinery
+ */
+uint8_t rf_core_rat_init(void);
+
+/**
+ * \brief Check if RAT overflow has occured and increment the overflow counter if so
+ */
+uint8_t rf_core_check_rat_overflow(void);
+
+/**
+ * \brief Convert from RAT timestamp to rtimer ticks
+ */
+uint32_t rf_core_convert_rat_to_rtimer(uint32_t rat_timestamp);
+
 /*---------------------------------------------------------------------------*/
 #endif /* RF_CORE_H_ */
 /*---------------------------------------------------------------------------*/

arch/cpu/cc26x0-cc13x0/ti-lib.h

@@ -399,6 +399,9 @@
 
 #define ti_lib_rfc_rtrim(...)                    RFCRTrim(__VA_ARGS__)
 #define ti_lib_rfc_adi3vco_ldo_voltage_mode(...) RFCAdi3VcoLdoVoltageMode(__VA_ARGS__)
+#define ti_lib_rfc_hw_int_enable(...)            RFCHwIntEnable(__VA_ARGS__)
+#define ti_lib_rfc_hw_int_disable(...)           RFCHwIntDisable(__VA_ARGS__)
+#define ti_lib_rfc_hw_int_clear(...)             RFCHwIntClear(__VA_ARGS__)
 /*---------------------------------------------------------------------------*/
 /* sys_ctrl.h */
 #include "driverlib/sys_ctrl.h"

arch/cpu/msp430/uip-ipchksum.c

@@ -51,7 +51,7 @@ uint16_t
 uip_ipchksum(void)
 {
   /* Assumes proper alignement of uip_buf. */
-  uint16_t *p = (uint16_t *)&uip_buf[UIP_LLH_LEN];
+  uint16_t *p = (uint16_t *)UIP_IP_BUF;
   register uint16_t sum;
 
   sum = p[0];

arch/cpu/native/net/tun6-net.c

@@ -263,7 +263,7 @@ output(const linkaddr_t *localdest)
 {
   LOG_DBG("SUT: %u\n", uip_len);
   if(uip_len > 0) {
-    return tun_output(&uip_buf[UIP_LLH_LEN], uip_len);
+    return tun_output(uip_buf, uip_len);
   }
   return 0;
 }
@@ -297,7 +297,7 @@ handle_fd(fd_set *rset, fd_set *wset)
   LOG_INFO("Tun6-handle FD\n");
 
   if(FD_ISSET(tunfd, rset)) {
-    size = tun_input(&uip_buf[UIP_LLH_LEN], sizeof(uip_buf));
+    size = tun_input(uip_buf, sizeof(uip_buf));
     LOG_DBG("TUN data incoming read:%d\n", size);
     uip_len = size;
     tcpip_input();

arch/cpu/simplelink-cc13xx-cc26xx/Makefile.cc13xx-cc26xx

@@ -3,7 +3,7 @@
 
 CC13x2_CC26x2_PRE_RTM ?= 1
 
-# Core SDK is placed as a submodule under arch/cpu/cc13xx-cc26xx/lib.
+# Core SDK is placed as a submodule under arch/cpu/simplelink-cc13xx-cc26xx/lib.
 # Do a sanity check that Core SDK submodule has been initialized.
 ifndef CORE_SDK
  CORE_SDK := $(CONTIKI_CPU)/lib/coresdk_cc13xx_cc26xx

arch/platform/cc26x0-cc13x0/Makefile.cc26x0-cc13x0

@@ -1,12 +1,12 @@
-# srf06-cc26xx platform makefile
+# cc26x0-cc13x0 platform makefile
 
 ifndef CONTIKI
   $(error CONTIKI not defined! You must specify where CONTIKI resides!)
 endif
 
 ### Board and BSP selection
-BOARD ?= srf06/cc26xx
-BOARDS = srf06/cc26xx srf06/cc13xx launchpad/cc2640r2 launchpad/cc2650 launchpad/cc1310 launchpad/cc1350 sensortag/cc2650 sensortag/cc1350
+BOARD ?= srf06/cc26x0
+BOARDS = srf06/cc26x0 srf06/cc13x0 launchpad/cc2640r2 launchpad/cc2650 launchpad/cc1310 launchpad/cc1350 sensortag/cc2650 sensortag/cc1350
 
 CONTIKI_TARGET_DIRS += .
 
@@ -25,5 +25,5 @@ SMALL ?= 0
 ### Define the CPU directory and pull in the correct CPU makefile. This will
 ### be defined by one of the makefiles included above and it can be either
 ### Makefile.cc26xx or Makefile.cc13xx
-CONTIKI_CPU=$(CONTIKI)/arch/cpu/cc26xx-cc13xx
+CONTIKI_CPU=$(CONTIKI)/arch/cpu/cc26x0-cc13x0
 include $(CONTIKI_CPU)/Makefile.$(CPU_FAMILY)

arch/platform/cc26x0-cc13x0/contiki-conf.h

@@ -32,7 +32,7 @@
  * @{
  *
  * \file
- *  Configuration for the srf06-cc26xx platform
+ *  Configuration for the cc26x0-cc13x0 platform
  */
 #ifndef CONTIKI_CONF_H
 #define CONTIKI_CONF_H

arch/platform/cc26x0-cc13x0/launchpad/cc1310/Makefile.cc1310

@@ -1,5 +1,5 @@
 ### Will allow the inclusion of the correct CPU makefile
-CPU_FAMILY = cc13xx
+CPU_FAMILY = cc13x0
 
 ### Add to the source dirs
 CONTIKI_TARGET_DIRS += launchpad/cc1310

arch/platform/cc26x0-cc13x0/launchpad/cc1350/Makefile.cc1350

@@ -1,5 +1,5 @@
 ### Will allow the inclusion of the correct CPU makefile
-CPU_FAMILY = cc13xx
+CPU_FAMILY = cc13x0
 
 ### Add to the source dirs
 CONTIKI_TARGET_DIRS += launchpad/cc1350

arch/platform/cc26x0-cc13x0/launchpad/cc2650/Makefile.cc2650

@@ -1,5 +1,5 @@
 ### Will allow the inclusion of the correct CPU makefile
-CPU_FAMILY = cc26xx
+CPU_FAMILY = cc26x0
 
 ### Add to the source dirs
 CONTIKI_TARGET_DIRS += launchpad/cc2650