From c55dc06b33473eb260e6d2b88bab591f8333c2a5 Mon Sep 17 00:00:00 2001 From: George Oikonomou Date: Fri, 18 May 2018 15:25:29 +0100 Subject: [PATCH] Update the cc26xx-web-demo readme --- .../cc26xx/cc26xx-web-demo/README.md | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/examples/platform-specific/cc26xx/cc26xx-web-demo/README.md b/examples/platform-specific/cc26xx/cc26xx-web-demo/README.md index 9a4617b3c..912fcb72a 100644 --- a/examples/platform-specific/cc26xx/cc26xx-web-demo/README.md +++ b/examples/platform-specific/cc26xx/cc26xx-web-demo/README.md @@ -10,11 +10,17 @@ demonstrate the CC26xx capability. The applications are: * A web server which can be used to display sensor readings but also to configure MQTT functionality -The example has been configured to run for all CC26xx-based boards: i) The -SensorTag 2.0 and ii) The Srf06EB with a CC26xx or CC13xx EM mounted on it. +The example has been configured to run for all CC26xx-based boards. -To change between target boards, follow the instructions in the platform's -REDME file. Do not forget to `make clean` when switching between the boards. +To change between target boards, follow the instructions in the wiki. +Do not forget to `make clean` when switching between the boards. + +Specifically for some older CC2650 SensorTags, you may also need to change +`project-conf.h` such that `SENSORTAG_CC2650_REV_1_2_0` is defined as 1. To +check if your sensortag is one of those older ones, look for "REV: 1.2" +printed on the PCB. There may also be a sticker that reads "HW Rev 1.2.0". An +indication that you may need to do this is if you get a "Could not open flash +to load config" error on device startup. You can disable some of those individual components by changing the respective defines in `project-conf.h`. For instance, to disable the CoAP functionality,