diff --git a/examples/zolertia/zoul/Makefile b/examples/zolertia/zoul/Makefile
index a0a8dee0d..fe3a6ddf8 100644
--- a/examples/zolertia/zoul/Makefile
+++ b/examples/zolertia/zoul/Makefile
@@ -3,12 +3,12 @@ DEFINES+=PROJECT_CONF_H=\"project-conf.h\"
 CONTIKI_PROJECT = zoul-demo test-tsl2563 test-sht25 test-pwm test-power-mgmt
 CONTIKI_PROJECT += test-bmp085-bmp180 test-motion test-rotation-sensor
 CONTIKI_PROJECT += test-grove-light-sensor test-grove-loudness-sensor
-CONTIKI_PROJECT += test-weather-meter test-grove-gyro test-lcd
+CONTIKI_PROJECT += test-weather-meter test-grove-gyro test-lcd test-iaq
 CONTIKI_PROJECT += test-pm10-sensor test-vac-sensor test-aac-sensor
 
 CONTIKI_TARGET_SOURCEFILES += tsl2563.c sht25.c bmpx8x.c motion-sensor.c
 CONTIKI_TARGET_SOURCEFILES += adc-sensors.c weather-meter.c grove-gyro.c
-CONTIKI_TARGET_SOURCEFILES += rgb-bl-lcd.c pm10-sensor.c
+CONTIKI_TARGET_SOURCEFILES += rgb-bl-lcd.c pm10-sensor.c iaq.c
 
 all: $(CONTIKI_PROJECT)
 
diff --git a/examples/zolertia/zoul/test-iaq.c b/examples/zolertia/zoul/test-iaq.c
new file mode 100644
index 000000000..147ecd8a7
--- /dev/null
+++ b/examples/zolertia/zoul/test-iaq.c
@@ -0,0 +1,112 @@
+/*
+ * Copyright (c) 2016, Zolertia - http://www.zolertia.com
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holder nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
+ * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/*---------------------------------------------------------------------------*/
+/**
+ * \addtogroup remote-examples
+ * @{
+ * \defgroup remote-iaq-test
+ * 
+ *  RE-Mote external IAQ test application
+ *  Example of iAQ-Core implementation and simple operation reading the value
+ *  of CO2, TVOC sensor and Status. The test checks for a each 5 minutes in 
+ *  order to get the first true measurement as datasheet recomendation
+ *  (standard result of 0x82 is obtained in first time). 
+ *  Then, once initialized, periodically each 5 seconds reads 
+ *  the values of the IAQ sensor and shows in the screen, toggling the LED 
+ *  red if CO2 was not initialized and LED green if the reading was succeed.
+ *
+ * @{
+ * \file
+ * RE-Mote implementation of external IAQ-CORE-C test application
+ * \author
+ * Aitor Mejias <amejias@zolertia.com>
+ */
+/*---------------------------------------------------------------------------*/
+#include "contiki.h"
+#include "iaq.h"
+#include "dev/i2c.h"
+#include "dev/leds.h"
+#include <stdio.h>
+#include <stdlib.h>
+/*---------------------------------------------------------------------------*/
+/* Standard warm up time iAQ Sensor */
+#define IAQ_INIT_WAIT         325L
+#define LOOP_PERIOD             5L
+#define LOOP_INTERVAL         (CLOCK_SECOND * LOOP_PERIOD)
+/*---------------------------------------------------------------------------*/
+PROCESS(test_remote_iaq_process, "Test IAQ driver process");
+AUTOSTART_PROCESSES(&test_remote_iaq_process);
+/*---------------------------------------------------------------------------*/
+static struct etimer et;
+/*---------------------------------------------------------------------------*/
+PROCESS_THREAD(test_remote_iaq_process, ev, data)
+{
+  static uint16_t count_delay = 0;
+  static uint16_t status = 0;
+
+  PROCESS_BEGIN();
+
+  /* Configure IAQ and return structure with all parameters */
+  SENSORS_ACTIVATE(iaq);
+
+  while(1) {
+    /* Wait a bit */
+    etimer_set(&et, (LOOP_INTERVAL));
+    PROCESS_WAIT_EVENT_UNTIL(etimer_expired(&et));
+
+    status = iaq.status(IAQ_DRIVER_STATUS);
+
+    if(status == IAQ_INIT_STATE) {
+      count_delay += LOOP_PERIOD;
+      leds_toggle(LEDS_RED);
+      printf("Test-IAQ: Initializing Time-elapsed: %u seconds of aprox. %lu sec.\n",
+      	      count_delay, IAQ_INIT_WAIT);
+    } else if(status == IAQ_ACTIVE) {
+      leds_off(LEDS_RED);
+      leds_toggle(LEDS_GREEN);
+
+      /* Get data from sensor: VOC, CO2 and internal status */
+      printf("CO2 current value is: %d ppm\n",   iaq.value(IAQ_VOC_VALUE));
+      printf("TIAQ current value is: %d ppb\n",  iaq.value(IAQ_CO2_VALUE));
+      printf("Status is: 0x%0X\n", iaq.value(IAQ_STATUS));
+    }
+    else {
+      printf("iAQ-Core Error: 0x%02X\n", status);
+    }
+  }
+
+  PROCESS_END();
+}
+/*---------------------------------------------------------------------------*/
+/**
+ * @}
+ * @}
+ */
+
diff --git a/platform/zoul/dev/iaq.c b/platform/zoul/dev/iaq.c
new file mode 100644
index 000000000..7bc929a26
--- /dev/null
+++ b/platform/zoul/dev/iaq.c
@@ -0,0 +1,202 @@
+/*
+ * Copyright (c) 2016, Zolertia <http://www.zolertia.com>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the Institute nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * This file is part of the Contiki operating system.
+ *
+ */
+/*---------------------------------------------------------------------------*/
+/**
+ * \addtogroup zoul-iaq-sensor
+ * @{
+ * Driver for the RE-Mote IAQ iAQ-Core (Indoor Air Quality Sensor)
+ * \file
+ * Driver for the RE-Mote RF IAQ iAQ-Core sensor (IAQ)
+ * \author
+ * Aitor Mejias <amejias@zolertia.com>
+ */
+/*---------------------------------------------------------------------------*/
+#include <stdio.h>
+#include "contiki.h"
+#include "dev/gpio.h"
+#include "dev/i2c.h"
+#include "iaq.h"
+#include "sys/timer.h"
+#include "sys/etimer.h"
+#include "lib/sensors.h"
+/*---------------------------------------------------------------------------*/
+#define DEBUG 0
+#if DEBUG
+#define PRINTF(...) printf(__VA_ARGS__)
+#else
+#define PRINTF(...)
+#endif
+/*---------------------------------------------------------------------------*/
+/* Callback pointers when interrupt occurs */
+void (*iaq_enable_callback)(uint16_t value);
+/*---------------------------------------------------------------------------*/
+static int16_t enabled;
+/*---------------------------------------------------------------------------*/
+static struct etimer et;
+static simple_iaq_data iaq_data;
+static uint8_t iaq_buffer[IAQ_FRAME_SIZE+1];
+/*---------------------------------------------------------------------------*/
+PROCESS(iaq_process, "IAQ process handler");
+/*---------------------------------------------------------------------------*/
+static int
+status(int type)
+{
+/* Return the status of the iAQ-Core or the status of the driver */
+  if (type == IAQ_STATUS) {
+    return (uint16_t)iaq_data.status;
+  } else if (type == IAQ_DRIVER_STATUS) {
+    return enabled;
+  }
+  return 0;
+}
+/*---------------------------------------------------------------------------*/
+PROCESS_THREAD(iaq_process, ev, data)
+{
+  #if DEBUG
+  uint8_t i = 0;
+  #endif
+
+  PROCESS_EXITHANDLER();
+  PROCESS_BEGIN();
+  i2c_init(I2C_SDA_PORT, I2C_SDA_PIN, I2C_SCL_PORT, I2C_SCL_PIN,
+      I2C_SCL_NORMAL_BUS_SPEED);
+
+  while(1) {
+    etimer_set(&et, (IAQ_POLLING_TIME));
+    PROCESS_WAIT_EVENT_UNTIL(etimer_expired(&et));
+
+    i2c_master_enable();
+    if(i2c_burst_receive(IAQ_ADDR, &iaq_buffer[0], IAQ_FRAME_SIZE) != 
+      I2C_MASTER_ERR_NONE) {
+      PRINTF("IAQ: Failed to retrieve data from IAQ\n");
+      enabled = IAQ_ERROR;
+      iaq_data.status = IAQ_INTERNAL_ERROR;
+    } else {
+      #if DEBUG
+      PRINTF("IAQ: Buffer ");
+      for (i=1;i<10;i++) {
+        PRINTF("[%d] %x,  ", i-1, iaq_buffer[i-1]);
+      }
+      PRINTF("\n");
+      #endif
+      /* Update the status of the sensor. This value readed represents the 
+         internal status of the external driver. */
+      switch (iaq_buffer[2]) {
+        case IAQ_INTERNAL_SUCCESS:
+          enabled = IAQ_ACTIVE;
+        break;
+        case IAQ_INTERNAL_RUNIN:
+          enabled = IAQ_INIT_STATE;
+        break;
+        case IAQ_INTERNAL_BUSY:
+        case IAQ_INTERNAL_ERROR:
+          enabled = IAQ_ERROR;
+        break;
+        default:
+          enabled = IAQ_ERROR;
+        break;
+      }
+  
+      iaq_data.tvoc = ((uint16_t)iaq_buffer[0] << 8) + iaq_buffer[1];
+      iaq_data.co2 = ((uint16_t)iaq_buffer[7] << 8) + iaq_buffer[8];
+      iaq_data.status = iaq_buffer[2];
+    }
+  }
+  PROCESS_END();
+}
+/*---------------------------------------------------------------------------*/
+static int
+value(int type)
+{
+  if (!enabled)  {
+    PRINTF("IAQ: Sensor not enabled\n");
+    return IAQ_ERROR;
+  }
+  if (enabled == IAQ_INIT_STATE)  {
+    PRINTF("IAQ: Sensor initializing\n");
+    return IAQ_INIT_STATE;
+  }
+  if (type == IAQ_CO2_VALUE) {
+    return iaq_data.co2;
+  }
+  if (type == IAQ_VOC_VALUE) {
+    return iaq_data.tvoc;
+  }
+  if (type == IAQ_STATUS) {
+    #if DEBUG
+    switch (iaq_data.status) {
+      case IAQ_INTERNAL_SUCCESS:
+        PRINTF("IAQ Status: SUCCESS\n");
+      break;
+      case IAQ_INTERNAL_RUNIN:
+        PRINTF("IAQ Status: WARM UP\n");
+      break;
+      case IAQ_INTERNAL_BUSY:
+      case IAQ_INTERNAL_ERROR:
+        PRINTF("IAQ Status: ERROR\n");
+      break;
+      default:
+        PRINTF("IAQ Status: UNKNOWN STATUS %d\n", iaq_data.status);
+      break;
+    }
+    #endif
+    return iaq_data.status;
+  }
+
+  return IAQ_ERROR;
+}
+/*---------------------------------------------------------------------------*/
+static int
+configure(int type, int value)
+{
+  /* Check the current status. If is initialized or is active, return the same
+     state */
+  if ((enabled == IAQ_INIT_STATE) || (enabled == IAQ_ACTIVE)) {
+    return IAQ_ERROR;
+  }
+
+  /* Fix the status in initial wait status */
+  enabled = IAQ_INIT_STATE;
+
+  /* Start Internal process to measure the iAQ Sensor */
+  process_start(&iaq_process, NULL);
+
+  return enabled;
+}
+/*---------------------------------------------------------------------------*/
+/* name, type, value, configure, status */
+SENSORS_SENSOR(iaq, IAQ_SENSOR, value, configure, status);  
+/*---------------------------------------------------------------------------*/
+/**
+ * @}
+ */
+
diff --git a/platform/zoul/dev/iaq.h b/platform/zoul/dev/iaq.h
new file mode 100644
index 000000000..92562dfd7
--- /dev/null
+++ b/platform/zoul/dev/iaq.h
@@ -0,0 +1,125 @@
+/*
+ * Copyright (c) 2016, Zolertia <http://www.zolertia.com>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the Institute nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * This file is part of the Contiki operating system.
+ *
+ */
+/* -------------------------------------------------------------------------- */
+/**
+ * \addtogroup zoul-sensors
+ * @{
+ * \defgroup zoul-iaq-sensor IAQ driver (Indoor Air Quality) Sensor Module
+ * IAQ driver RE-Mote Indoor Air Quality Sensor Module
+ * Driver for the RE-Mote Sensor pack: Air Quality Sensor Module (IAQ)
+ * @{
+ * \file
+ * Header file for the RE-Mote Sensor IAQ
+ */
+/* -------------------------------------------------------------------------- */
+#ifndef IAQ_H_
+#define IAQ_H_
+/* -------------------------------------------------------------------------- */
+#include <stdio.h>
+#include "lib/sensors.h"
+#include "dev/zoul-sensors.h"
+#include "iaq.h"
+#include "i2c.h"
+#include "sys/timer.h"
+#include "sys/rtimer.h"
+/* -------------------------------------------------------------------------- */
+/** \name IAQ address and definition
+ * @{
+ */
+/* Address of the sensor: 1011010(1) Addr (R/W bit) */
+#define IAQ_ADDR                  0x5A
+#define IAQ_SENSOR               "iAQ"
+/** @} */
+/* -------------------------------------------------------------------------- */
+/** \name IAQ sensor types in iAQ-Core module 
+ * @{
+ */
+extern const struct sensors_sensor iaq;
+/** @} */
+/* -------------------------------------------------------------------------- */
+/** \name IAQ error values and definitions
+ * @{
+ */
+#define IAQ_ACTIVE                SENSORS_ACTIVE
+#define IAQ_INIT_STATE            SENSORS_HW_INIT
+#define IAQ_ERROR                 (-1)
+#define IAQ_SUCCESS               0x00
+#define IAQ_FRAME_SIZE            0x09
+
+/* Variables used by external driver to get the state */
+#define IAQ_INTERNAL_SUCCESS      0x00
+#define IAQ_INTERNAL_RUNIN        0x10
+#define IAQ_INTERNAL_BUSY         0x01
+#define IAQ_INTERNAL_ERROR        0x80
+
+/* Value types for the sensor readings */
+#define IAQ_CO2_VALUE             0x00
+#define IAQ_VOC_VALUE             0x01
+#define IAQ_STATUS                0x02
+#define IAQ_DRIVER_STATUS         0x03
+
+/* Definition that corresponds with the two models of iAQ Sensor */
+#ifdef IAQ_PULSE_MODE
+#define IAQ_POLLING_TIME         (CLOCK_SECOND * 11)
+#else
+#define IAQ_POLLING_TIME         (CLOCK_SECOND)
+#endif
+/** @} */
+/* -------------------------------------------------------------------------- */
+/** \name IAQ enumeration and options
+ * @{
+ */
+enum {
+  IAQ_INIT = 0,
+  IAQ_STARTED,
+};
+/** @} */
+/* -------------------------------------------------------------------------- */
+/** \name Readable IAQ-Core interface result conversion implementation as 
+ * datasheet specification.
+ *
+ * @{
+ */
+typedef struct iaq_struct_simple_td_reg {
+  uint16_t co2;
+  uint8_t status;
+  int32_t resistance;
+  uint16_t tvoc;
+}  __attribute__ ((packed)) simple_iaq_data;
+/** @} */
+/* -------------------------------------------------------------------------- */
+#endif
+/* -------------------------------------------------------------------------- */
+/**
+ * @}
+ * @}
+ */