tmr-ints
This commit is contained in:
parent
cd5e5b1706
commit
d3fed95235
|
@ -1,7 +1,5 @@
|
|||
#include "types.h"
|
||||
#include "isr.h"
|
||||
|
||||
#define reg32(x) (*(volatile uint32_t *)(x))
|
||||
#include <mc1322x.h>
|
||||
#include <types.h>
|
||||
|
||||
__attribute__ ((section (".irq")))
|
||||
__attribute__ ((interrupt("IRQ")))
|
||||
|
|
|
@ -6,7 +6,7 @@ MC1322X := ..
|
|||
COBJS := tests.o put.o
|
||||
|
||||
# all of the target programs to build
|
||||
TARGETS := blink-red blink-green blink-blue blink-white blink-allio uart1-loopback nvm-read nvm-write romimg flasher tmr
|
||||
TARGETS := blink-red blink-green blink-blue blink-white blink-allio uart1-loopback nvm-read nvm-write romimg flasher tmr tmr-ints
|
||||
|
||||
include $(MC1322X)/Makefile.include
|
||||
|
||||
|
|
|
@ -1,63 +1,15 @@
|
|||
/* Timer registers are all 16-bit wide with 16-bit access only */
|
||||
#define TMR_OFFSET (0x20)
|
||||
#define TMR_BASE (0x80007000)
|
||||
#define TMR0_BASE (TMR_BASE)
|
||||
#define TMR1_BASE (TMR_BASE + TMR_OFFSET*1)
|
||||
#define TMR2_BASE (TMR_BASE + TMR_OFFSET*2)
|
||||
#define TMR3_BASE (TMR_BASE + TMR_OFFSET*3)
|
||||
#include <mc1322x.h>
|
||||
#include <board.h>
|
||||
|
||||
#define TMR_REGOFF_COMP1 (0x0)
|
||||
#define TMR_REGOFF_COMP2 (0x2)
|
||||
#define TMR_REGOFF_CAPT (0x4)
|
||||
#define TMR_REGOFF_LOAD (0x6)
|
||||
#define TMR_REGOFF_HOLD (0x8)
|
||||
#define TMR_REGOFF_CNTR (0xa)
|
||||
#define TMR_REGOFF_CTRL (0xc)
|
||||
#define TMR_REGOFF_SCTRL (0xe)
|
||||
#define TMR_REGOFF_CMPLD1 (0x10)
|
||||
#define TMR_REGOFF_CMPLD2 (0x12)
|
||||
#define TMR_REGOFF_CSCTRL (0x14)
|
||||
#define TMR_REGOFF_ENBL (0x1e)
|
||||
|
||||
/* Timer 0 registers */
|
||||
#define TMR0_COMP1 (TMR0_BASE + TMR_REGOFF_COMP1)
|
||||
#define TMR0_COMP_UP TMR0_COMP1
|
||||
#define TMR0_COMP2 (TMR0_BASE + TMR_REGOFF_COMP2)
|
||||
#define TMR0_COMP_DOWN TMR0_COMP2
|
||||
#define TMR0_CAPT (TMR0_BASE + TMR_REGOFF_CAPT)
|
||||
#define TMR0_LOAD (TMR0_BASE + TMR_REGOFF_LOAD)
|
||||
#define TMR0_HOLD (TMR0_BASE + TMR_REGOFF_HOLD)
|
||||
#define TMR0_CNTR (TMR0_BASE + TMR_REGOFF_CTRL)
|
||||
#define TMR0_CTRL (TMR0_BASE + TMR_REGOFF_CTRL)
|
||||
#define TMR0_SCTRL (TMR0_BASE + TMR_REGOFF_SCTRL)
|
||||
#define TMR0_CMPLD1 (TMR0_BASE + TMR_REGOFF_CMPLD1)
|
||||
#define TMR0_CMPLD2 (TMR0_BASE + TMR_REGOFF_CMPLD2)
|
||||
#define TMR0_CSCTRL (TMR0_BASE + TMR_REGOFF_CSCTRL)
|
||||
|
||||
/* one enable register to rule them all */
|
||||
#define TMR_ENBL TMR0_BASE + TMR_REGOFF_ENBL
|
||||
|
||||
#define MBAR_GPIO 0x80000000
|
||||
#define GPIO_PAD_DIR0 0x80000000
|
||||
#define GPIO_DATA0 0x80000008
|
||||
#define UART1_DATA 0x80005008
|
||||
#define DELAY 400000
|
||||
|
||||
#define reg32(x) (*(volatile uint32_t *)(x))
|
||||
#define reg16(x) (*(volatile uint16_t *)(x))
|
||||
|
||||
#include "embedded_types.h"
|
||||
//#include "sys-interrupt.h"
|
||||
|
||||
#include "isr.h"
|
||||
#include "led.h"
|
||||
#include "tests.h"
|
||||
#include "config.h"
|
||||
|
||||
volatile uint8_t led;
|
||||
|
||||
#define LED_VAL LED_PURPLE
|
||||
#define led_init() do { reg32(GPIO_PAD_DIR0) = LED_VAL; } while(0);
|
||||
#define led_on() do { led = 1; reg32(GPIO_DATA0) = LED_VAL; } while(0);
|
||||
#define led_off() do { led = 0; reg32(GPIO_DATA0) = 0x00000000; } while(0);
|
||||
#define led_init() do { *GPIO_PAD_DIR0 = LED_VAL; } while(0);
|
||||
#define led_on() do { led = 1; *GPIO_DATA0 = LED_VAL; } while(0);
|
||||
#define led_off() do { led = 0; *GPIO_DATA0 = 0x00000000; } while(0);
|
||||
|
||||
void toggle_led(void) {
|
||||
if(0 == led) {
|
||||
|
@ -72,27 +24,14 @@ void toggle_led(void) {
|
|||
void tmr_isr(void) {
|
||||
|
||||
toggle_led();
|
||||
reg16(TMR0_SCTRL) = 0;
|
||||
reg16(TMR0_CSCTRL) = 0x0040; /* clear compare flag */
|
||||
*TMR0_SCTRL = 0;
|
||||
*TMR0_CSCTRL = 0x0040; /* clear compare flag */
|
||||
|
||||
}
|
||||
|
||||
|
||||
/* void enIRQ(void) { */
|
||||
/* asm volatile ( */
|
||||
/* ".code 32;" */
|
||||
/* "msr cpsr_c,#0x10;" */
|
||||
/* ".code 16;" */
|
||||
/* ); */
|
||||
/* } */
|
||||
|
||||
|
||||
__attribute__ ((section ("startup")))
|
||||
void main(void) {
|
||||
|
||||
// *(volatile uint32_t *)0x80020010 = 0x20;
|
||||
// *(volatile uint32_t *)0x80020034 = 0xffff; //force an int.
|
||||
|
||||
/* pin direction */
|
||||
led_init();
|
||||
|
||||
|
@ -107,22 +46,20 @@ void main(void) {
|
|||
#define CO_INIT 0 /* other counters cannot force a re-initialization of this counter */
|
||||
#define OUT_MODE 0 /* OFLAG is asserted while counter is active */
|
||||
|
||||
reg16(TMR_ENBL) = 0; /* tmrs reset to enabled */
|
||||
reg16(TMR0_SCTRL) = 0;
|
||||
reg16(TMR0_CSCTRL) =0x0040;
|
||||
reg16(TMR0_LOAD) = 0; /* reload to zero */
|
||||
reg16(TMR0_COMP_UP) = 18750; /* trigger a reload at the end */
|
||||
reg16(TMR0_CMPLD1) = 18750; /* compare 1 triggered reload level, 10HZ maybe? */
|
||||
reg16(TMR0_CNTR) = 0; /* reset count register */
|
||||
reg16(TMR0_CTRL) = (COUNT_MODE<<13) | (PRIME_SRC<<9) | (SEC_SRC<<7) | (ONCE<<6) | (LEN<<5) | (DIR<<4) | (CO_INIT<<3) | (OUT_MODE);
|
||||
reg16(TMR_ENBL) = 0xf; /* enable all the timers --- why not? */
|
||||
*TMR_ENBL = 0; /* tmrs reset to enabled */
|
||||
*TMR0_SCTRL = 0;
|
||||
*TMR0_CSCTRL = 0x0040;
|
||||
*TMR0_LOAD = 0; /* reload to zero */
|
||||
*TMR0_COMP_UP = 18750; /* trigger a reload at the end */
|
||||
*TMR0_CMPLD1 = 18750; /* compare 1 triggered reload level, 10HZ maybe? */
|
||||
*TMR0_CNTR = 0; /* reset count register */
|
||||
*TMR0_CTRL = (COUNT_MODE<<13) | (PRIME_SRC<<9) | (SEC_SRC<<7) | (ONCE<<6) | (LEN<<5) | (DIR<<4) | (CO_INIT<<3) | (OUT_MODE);
|
||||
*TMR_ENBL = 0xf; /* enable all the timers --- why not? */
|
||||
|
||||
led_on();
|
||||
|
||||
enable_tmr_irq();
|
||||
|
||||
// enIRQ();
|
||||
|
||||
/* go into user mode to handle IRQs */
|
||||
/* disabling interrupts is now difficult */
|
||||
asm(".code 32;"
|
||||
|
|
Loading…
Reference in New Issue