/* * Copyright (c) 2011, Swedish Institute of Computer Science * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the Institute nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * */ #include "contiki.h" #include #include #include "dev/cc2520/cc2520.h" //#include "dev/ds2411.h" #include "dev/leds.h" #include "dev/serial-line.h" #include "dev/slip.h" #include "dev/uart1.h" #include "dev/watchdog.h" #include "dev/xmem.h" #include "lib/random.h" #include "net/netstack.h" #include "net/queuebuf.h" #include "net/mac/frame802154.h" #if NETSTACK_CONF_WITH_IPV6 #include "net/ipv6/uip-ds6.h" #endif /* NETSTACK_CONF_WITH_IPV6 */ #include "sys/node-id.h" #include "sys/autostart.h" #if UIP_CONF_ROUTER #ifndef UIP_ROUTER_MODULE #ifdef UIP_CONF_ROUTER_MODULE #define UIP_ROUTER_MODULE UIP_CONF_ROUTER_MODULE #else /* UIP_CONF_ROUTER_MODULE */ #define UIP_ROUTER_MODULE rimeroute #endif /* UIP_CONF_ROUTER_MODULE */ #endif /* UIP_ROUTER_MODULE */ extern const struct uip_router UIP_ROUTER_MODULE; #endif /* UIP_CONF_ROUTER */ #ifndef NETSTACK_CONF_WITH_IPV4 #define NETSTACK_CONF_WITH_IPV4 0 #endif #if NETSTACK_CONF_WITH_IPV4 #include "net/ip/uip.h" #include "net/ipv4/uip-fw.h" #include "net/ipv4/uip-fw-drv.h" #include "net/ipv4/uip-over-mesh.h" static struct uip_fw_netif slipif = {UIP_FW_NETIF(192,168,1,2, 255,255,255,255, slip_send)}; static struct uip_fw_netif meshif = {UIP_FW_NETIF(172,16,0,0, 255,255,0,0, uip_over_mesh_send)}; #endif /* NETSTACK_CONF_WITH_IPV4 */ #define UIP_OVER_MESH_CHANNEL 8 #if NETSTACK_CONF_WITH_IPV4 static uint8_t is_gateway; #endif /* NETSTACK_CONF_WITH_IPV4 */ #ifdef EXPERIMENT_SETUP #include "experiment-setup.h" #endif void init_platform(void); /*---------------------------------------------------------------------------*/ #if 0 int force_float_inclusion() { extern int __fixsfsi; extern int __floatsisf; extern int __mulsf3; extern int __subsf3; return __fixsfsi + __floatsisf + __mulsf3 + __subsf3; } #endif /*---------------------------------------------------------------------------*/ void uip_log(char *msg) { puts(msg); } /*---------------------------------------------------------------------------*/ #ifndef RF_CHANNEL #define RF_CHANNEL 26 #endif /*---------------------------------------------------------------------------*/ #if 0 void force_inclusion(int d1, int d2) { snprintf(NULL, 0, "%d", d1 % d2); } #endif /*---------------------------------------------------------------------------*/ #ifndef NODE_ID #define NODE_ID 0x03 #endif /* NODE_ID */ static void set_rime_addr(void) { linkaddr_t n_addr; int i; memset(&n_addr, 0, sizeof(linkaddr_t)); // Set node address #if NETSTACK_CONF_WITH_IPV6 //memcpy(addr.u8, ds2411_id, sizeof(addr.u8)); n_addr.u8[7] = node_id & 0xff; n_addr.u8[6] = node_id >> 8; #else /* if(node_id == 0) { for(i = 0; i < sizeof(linkaddr_t); ++i) { addr.u8[i] = ds2411_id[7 - i]; } } else { addr.u8[0] = node_id & 0xff; addr.u8[1] = node_id >> 8; }*/ n_addr.u8[0] = node_id & 0xff; n_addr.u8[1] = node_id >> 8; #endif linkaddr_set_node_addr(&n_addr); printf("Rime started with address "); for(i = 0; i < sizeof(n_addr.u8) - 1; i++) { printf("%d.", n_addr.u8[i]); } printf("%d\n", n_addr.u8[i]); } /*---------------------------------------------------------------------------*/ #if !PROCESS_CONF_NO_PROCESS_NAMES static void print_processes(struct process * const processes[]) { /* const struct process * const * p = processes;*/ printf("Starting"); while(*processes != NULL) { printf(" '%s'", (*processes)->name); processes++; } putchar('\n'); } #endif /* !PROCESS_CONF_NO_PROCESS_NAMES */ /*--------------------------------------------------------------------------*/ #if NETSTACK_CONF_WITH_IPV4 static void set_gateway(void) { if(!is_gateway) { leds_on(LEDS_RED); //printf("%d.%d: making myself the IP network gateway.\n\n", // linkaddr_node_addr.u8[0], linkaddr_node_addr.u8[1]); //printf("IPv4 address of the gateway: %d.%d.%d.%d\n\n", // uip_ipaddr_to_quad(&uip_hostaddr)); uip_over_mesh_set_gateway(&linkaddr_node_addr); uip_over_mesh_make_announced_gateway(); is_gateway = 1; } } #endif /* NETSTACK_CONF_WITH_IPV4 */ /*---------------------------------------------------------------------------*/ int main(int argc, char **argv) { /* * Initalize hardware. */ msp430_cpu_init(); clock_init(); leds_init(); leds_on(LEDS_RED); clock_wait(2); uart1_init(115200); /* Must come before first printf */ #if NETSTACK_CONF_WITH_IPV4 slip_arch_init(115200); #endif /* NETSTACK_CONF_WITH_IPV4 */ clock_wait(1); leds_on(LEDS_GREEN); //ds2411_init(); /* XXX hack: Fix it so that the 802.15.4 MAC address is compatible with an Ethernet MAC address - byte 0 (byte 2 in the DS ID) cannot be odd. */ //ds2411_id[2] &= 0xfe; leds_on(LEDS_BLUE); xmem_init(); leds_off(LEDS_RED); rtimer_init(); /* * Hardware initialization done! */ /* Restore node id if such has been stored in external mem */ node_id_restore(); if(!node_id) { node_id = NODE_ID; } /* for setting "hardcoded" IEEE 802.15.4 MAC addresses */ #ifdef IEEE_802154_MAC_ADDRESS { uint8_t ieee[] = IEEE_802154_MAC_ADDRESS; //memcpy(ds2411_id, ieee, sizeof(uip_lladdr.addr)); //ds2411_id[7] = node_id & 0xff; } #endif //random_init(ds2411_id[0] + node_id); leds_off(LEDS_BLUE); /* * Initialize Contiki and our processes. */ process_init(); process_start(&etimer_process, NULL); ctimer_init(); init_platform(); set_rime_addr(); random_init(linkaddr_node_addr.u8[LINKADDR_SIZE-2] + linkaddr_node_addr.u8[LINKADDR_SIZE-1]); cc2520_init(); { uint8_t longaddr[8]; uint16_t shortaddr; shortaddr = (linkaddr_node_addr.u8[0] << 8) + linkaddr_node_addr.u8[1]; memset(longaddr, 0, sizeof(longaddr)); linkaddr_copy((linkaddr_t *)&longaddr, &linkaddr_node_addr); printf("MAC %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x ", longaddr[0], longaddr[1], longaddr[2], longaddr[3], longaddr[4], longaddr[5], longaddr[6], longaddr[7]); cc2520_set_pan_addr(IEEE802154_PANID, shortaddr, longaddr); } cc2520_set_channel(RF_CHANNEL); printf(CONTIKI_VERSION_STRING " started. "); if(node_id > 0) { printf("Node id is set to %u.\n", node_id); } else { printf("Node id is not set.\n"); } #if NETSTACK_CONF_WITH_IPV6 /* memcpy(&uip_lladdr.addr, ds2411_id, sizeof(uip_lladdr.addr)); */ memcpy(&uip_lladdr.addr, linkaddr_node_addr.u8, UIP_LLADDR_LEN > LINKADDR_SIZE ? LINKADDR_SIZE : UIP_LLADDR_LEN); /* Setup nullmac-like MAC for 802.15.4 */ /* sicslowpan_init(sicslowmac_init(&cc2520_driver)); */ /* printf(" %s channel %u\n", sicslowmac_driver.name, RF_CHANNEL); */ /* Setup X-MAC for 802.15.4 */ queuebuf_init(); NETSTACK_RDC.init(); NETSTACK_MAC.init(); NETSTACK_NETWORK.init(); printf("%s %s, channel check rate %lu Hz, radio channel %u\n", NETSTACK_MAC.name, NETSTACK_RDC.name, CLOCK_SECOND / (NETSTACK_RDC.channel_check_interval() == 0 ? 1: NETSTACK_RDC.channel_check_interval()), RF_CHANNEL); process_start(&tcpip_process, NULL); printf("Tentative link-local IPv6 address "); { uip_ds6_addr_t *lladdr; int i; lladdr = uip_ds6_get_link_local(-1); for(i = 0; i < 7; ++i) { printf("%02x%02x:", lladdr->ipaddr.u8[i * 2], lladdr->ipaddr.u8[i * 2 + 1]); } printf("%02x%02x\n", lladdr->ipaddr.u8[14], lladdr->ipaddr.u8[15]); } if(!UIP_CONF_IPV6_RPL) { uip_ipaddr_t ipaddr; int i; uip_ip6addr(&ipaddr, UIP_DS6_DEFAULT_PREFIX, 0, 0, 0, 0, 0, 0, 0); uip_ds6_set_addr_iid(&ipaddr, &uip_lladdr); uip_ds6_addr_add(&ipaddr, 0, ADDR_TENTATIVE); printf("Tentative global IPv6 address "); for(i = 0; i < 7; ++i) { printf("%02x%02x:", ipaddr.u8[i * 2], ipaddr.u8[i * 2 + 1]); } printf("%02x%02x\n", ipaddr.u8[7 * 2], ipaddr.u8[7 * 2 + 1]); } #else /* NETSTACK_CONF_WITH_IPV6 */ NETSTACK_RDC.init(); NETSTACK_MAC.init(); NETSTACK_NETWORK.init(); printf("%s %s, channel check rate %lu Hz, radio channel %u\n", NETSTACK_MAC.name, NETSTACK_RDC.name, CLOCK_SECOND / (NETSTACK_RDC.channel_check_interval() == 0? 1: NETSTACK_RDC.channel_check_interval()), RF_CHANNEL); #endif /* NETSTACK_CONF_WITH_IPV6 */ #if !NETSTACK_CONF_WITH_IPV4 && !NETSTACK_CONF_WITH_IPV6 uart1_set_input(serial_line_input_byte); serial_line_init(); #endif leds_off(LEDS_GREEN); #if TIMESYNCH_CONF_ENABLED timesynch_init(); timesynch_set_authority_level((linkaddr_node_addr.u8[0] << 4) + 16); #endif /* TIMESYNCH_CONF_ENABLED */ #if NETSTACK_CONF_WITH_IPV4 process_start(&tcpip_process, NULL); process_start(&uip_fw_process, NULL); /* Start IP output */ process_start(&slip_process, NULL); slip_set_input_callback(set_gateway); { uip_ipaddr_t hostaddr, netmask; uip_init(); uip_ipaddr(&hostaddr, 172,16, linkaddr_node_addr.u8[0],linkaddr_node_addr.u8[1]); uip_ipaddr(&netmask, 255,255,0,0); uip_ipaddr_copy(&meshif.ipaddr, &hostaddr); uip_sethostaddr(&hostaddr); uip_setnetmask(&netmask); uip_over_mesh_set_net(&hostaddr, &netmask); /* uip_fw_register(&slipif);*/ uip_over_mesh_set_gateway_netif(&slipif); uip_fw_default(&meshif); uip_over_mesh_init(UIP_OVER_MESH_CHANNEL); printf("uIP started with IP address %d.%d.%d.%d\n", uip_ipaddr_to_quad(&hostaddr)); } #endif /* NETSTACK_CONF_WITH_IPV4 */ energest_init(); ENERGEST_ON(ENERGEST_TYPE_CPU); watchdog_start(); /* Stop the watchdog */ watchdog_stop(); #if !PROCESS_CONF_NO_PROCESS_NAMES print_processes(autostart_processes); #else /* !PROCESS_CONF_NO_PROCESS_NAMES */ putchar('\n'); /* include putchar() */ #endif /* !PROCESS_CONF_NO_PROCESS_NAMES */ autostart_start(autostart_processes); /* * This is the scheduler loop. */ while(1) { int r; do { /* Reset watchdog. */ watchdog_periodic(); r = process_run(); } while(r > 0); /* * Idle processing. */ int s = splhigh(); /* Disable interrupts. */ /* uart1_active is for avoiding LPM3 when still sending or receiving */ if(process_nevents() != 0 || uart1_active()) { splx(s); /* Re-enable interrupts. */ } else { static unsigned long irq_energest = 0; /* Re-enable interrupts and go to sleep atomically. */ ENERGEST_SWITCH(ENERGEST_TYPE_CPU, ENERGEST_TYPE_LPM); /* We only want to measure the processing done in IRQs when we are asleep, so we discard the processing time done when we were awake. */ energest_type_set(ENERGEST_TYPE_IRQ, irq_energest); watchdog_stop(); _BIS_SR(GIE | SCG0 | SCG1 | CPUOFF); /* LPM3 sleep. This statement will block until the CPU is woken up by an interrupt that sets the wake up flag. */ /* We get the current processing time for interrupts that was done during the LPM and store it for next time around. */ dint(); irq_energest = energest_type_time(ENERGEST_TYPE_IRQ); eint(); watchdog_start(); ENERGEST_SWITCH(ENERGEST_TYPE_LPM, ENERGEST_TYPE_CPU); } } } /*---------------------------------------------------------------------------*/ #if LOG_CONF_ENABLED void log_message(char *m1, char *m2) { printf("%s%s\n", m1, m2); } #endif /* LOG_CONF_ENABLED */