/* * Copyright (c) 2006, Technical University of Munich * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the Institute nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * This file is part of the Contiki operating system. * * @(#)$$ */ /** * \file * Configuration for AVR Zigbit Contiki kernel * * \author * Simon Barner */ #ifndef CONTIKI_CONF_H_ #define CONTIKI_CONF_H_ /* Platform name, type, and MCU clock rate */ #define PLATFORM_NAME "Zigbit" #define PLATFORM_TYPE ZIGBIT #ifndef F_CPU #define F_CPU 8000000UL #endif #include #include /* Skip the last four bytes of the EEPROM, to leave room for things * like the avrdude erase count and bootloader signaling. */ #define EEPROM_CONF_SIZE ((E2END + 1) - 4) /* The AVR tick interrupt usually is done with an 8 bit counter around 128 Hz. * 125 Hz needs slightly more overhead during the interrupt, as does a 32 bit * clock_time_t. */ /* Clock ticks per second */ #define CLOCK_CONF_SECOND 125 #if 1 /* 16 bit counter overflows every ~10 minutes */ typedef unsigned short clock_time_t; #define CLOCK_LT(a,b) ((signed short)((a)-(b)) < 0) #define INFINITE_TIME 0xffff #define RIME_CONF_BROADCAST_ANNOUNCEMENT_MAX_TIME INFINITE_TIME/CLOCK_CONF_SECOND /* Default uses 600 */ #define COLLECT_CONF_BROADCAST_ANNOUNCEMENT_MAX_TIME INFINITE_TIME/CLOCK_CONF_SECOND /* Default uses 600 */ #else typedef unsigned long clock_time_t; #define CLOCK_LT(a,b) ((signed long)((a)-(b)) < 0) #define INFINITE_TIME 0xffffffff #endif /* These routines are not part of the contiki core but can be enabled in cpu/avr/clock.c */ void clock_delay_msec(uint16_t howlong); void clock_adjust_ticks(clock_time_t howmany); /* COM port to be used for SLIP connection */ #define SLIP_PORT RS232_PORT_0 /* Pre-allocated memory for loadable modules heap space (in bytes)*/ #define MMEM_CONF_SIZE 256 /* Use the following address for code received via the codeprop * facility */ #define EEPROMFS_ADDR_CODEPROP 0x8000 #define CCIF #define CLIF #ifndef CC_CONF_INLINE #define CC_CONF_INLINE inline #endif #define LINKADDR_CONF_SIZE 8 #define PACKETBUF_CONF_HDR_SIZE 0 //define NETSTACK_CONF_WITH_IPV6 1 //Let the makefile do this, allows hello-world to compile #if NETSTACK_CONF_WITH_IPV6 #define UIP_CONF_ICMP6 1 #define UIP_CONF_UDP 1 #define UIP_CONF_TCP 1 #endif /* The new NETSTACK interface requires RF230BB */ #if RF230BB #define SICSLOWPAN_CONF_COMPRESSION SICSLOWPAN_COMPRESSION_HC06 #undef PACKETBUF_CONF_HDR_SIZE //RF230BB takes the packetbuf default for header size #define UIP_CONF_LLH_LEN 0 /* No radio cycling */ #if NETSTACK_CONF_WITH_IPV6 #define NETSTACK_CONF_NETWORK sicslowpan_driver #else #define NETSTACK_CONF_NETWORK rime_driver #endif #define NETSTACK_CONF_MAC nullmac_driver #define NETSTACK_CONF_RDC sicslowmac_driver #define NETSTACK_CONF_FRAMER framer_802154 #define NETSTACK_CONF_RADIO rf230_driver #define CHANNEL_802_15_4 26 #define RF230_CONF_AUTOACK 1 #define RF230_CONF_FRAME_RETRIES 2 #define SICSLOWPAN_CONF_FRAG 1 //Most browsers reissue GETs after 3 seconds which stops frag reassembly, longer MAXAGE does no good #define SICSLOWPAN_CONF_MAXAGE 3 #define QUEUEBUF_CONF_NUM 1 #define QUEUEBUF_CONF_REF_NUM 1 /* Default uip_aligned_buf and sicslowpan_aligned_buf sizes of 1280 overflows RAM */ #define UIP_CONF_BUFFER_SIZE 240 #else /* Original combined RF230/mac code will not compile with current contiki stack */ //#define PACKETBUF_CONF_HDR_SIZE 0 //RF230 handles headers internally //FTH081105 #define SICSLOWPAN_CONF_COMPRESSION SICSLOWPAN_COMPRESSION_HC06 #define SICSLOWPAN_CONF_MAXAGE 5 #define UIP_CONF_LLH_LEN 14 #endif /*RF230BB */ #define SICSLOWPAN_CONF_MAX_ADDR_CONTEXTS 2 #define SICSLOWPAN_CONF_FRAG 1 #define UIP_CONF_LL_802154 1 #define UIP_CONF_MAX_CONNECTIONS 2 #define UIP_CONF_MAX_LISTENPORTS 2 #define UIP_CONF_UDP_CONNS 2 #define UIP_CONF_IP_FORWARD 0 #define UIP_CONF_FWCACHE_SIZE 0 #define UIP_CONF_IPV6_CHECKS 1 #define UIP_CONF_IPV6_QUEUE_PKT 0 #define UIP_CONF_IPV6_REASSEMBLY 0 #define UIP_CONF_NETIF_MAX_ADDRESSES 3 #define UIP_CONF_ND6_MAX_PREFIXES 3 #define UIP_CONF_ND6_MAX_DEFROUTERS 2 #define UIP_CONF_UDP_CHECKSUMS 1 #define UIP_CONF_TCP_SPLIT 1 /* These names are deprecated, use C99 names. */ /* typedef unsigned char u8_t; typedef unsigned short u16_t; typedef unsigned long u32_t; typedef int32_t s32_t; */ typedef unsigned short uip_stats_t; typedef unsigned long off_t; #endif /* CONTIKI_CONF_H_ */