//*********************************************************************************
// Generated by SmartRF Studio version 2.8.0 ( build #41)
// Compatible with SimpleLink SDK version: CC13x2 SDK 1.60.xx.xx
// Device: CC1352 Rev. 1.0
//
//*********************************************************************************


//*********************************************************************************
// Parameter summary
// IEEE Channel: 11
// Frequency: 2405 MHz
// SFD: 0
// Preamble (32 bit): 01010101...
// TX Power: 5 dBm

#include <ti/devices/DeviceFamily.h>
#include DeviceFamily_constructPath(driverlib/rf_mailbox.h)
#include DeviceFamily_constructPath(driverlib/rf_common_cmd.h)
#include DeviceFamily_constructPath(driverlib/rf_ieee_cmd.h)
#include <ti/drivers/rf/RF.h>
#include DeviceFamily_constructPath(rf_patches/rf_patch_cpe_ieee_802_15_4.h)
#include DeviceFamily_constructPath(rf_patches/rf_patch_mce_ieee_802_15_4.h)

#include "rf-common.h"

/*---------------------------------------------------------------------------*/
/* Default TX power settings for the 2.4 GHz band */
RF_TxPower RF_ieeeTxPower[] = {
  {   5, 0x9330 },
  {   4, 0x9324 },
  {   3, 0x5a1c },
  {   2, 0x4e18 },
  {   1, 0x4214 },
  {   0, 0x3161 },
  {  -3, 0x2558 },
  {  -6, 0x1d52 },
  {  -9, 0x194e },
  { -12, 0x144b },
  { -15, 0x0ccb },
  { -18, 0x0cc9 },
  { -21, 0x0cc7 },
  {-128, 0xFFFF },
};
const size_t RF_ieeeTxPowerLen = sizeof(RF_ieeeTxPower) / sizeof(RF_ieeeTxPower[0]);


// TI-RTOS RF Mode Object
RF_Mode RF_ieeeMode =
{
    .rfMode = RF_MODE_AUTO,
    .cpePatchFxn = &rf_patch_cpe_ieee_802_15_4,
    .mcePatchFxn = &rf_patch_mce_ieee_802_15_4,
    .rfePatchFxn = 0,
};


// Overrides for CMD_RADIO_SETUP
static uint32_t pOverrides[] =
{
    // override_use_patch_ieee_802_15_4.xml
    // PHY: Use MCE RAM patch, RFE ROM bank 1
    MCE_RFE_OVERRIDE(1,0,0,0,1,0),
    // override_synth_ieee_802_15_4.xml
    // Synth: Use 48 MHz crystal
    (uint32_t)0x00408403,
    // override_dcdc_rx_tx_common.xml
    // DC/DC regulator: In Tx, use DCDCCTL5[3:0]=0xC (DITHER_EN=1 and IPEAK=4). In Rx, use DCDCCTL5[3:0]=0xC (DITHER_EN=1 and IPEAK=4).
    (uint32_t)0xFCFC08C3,
    (uint32_t)0xFFFFFFFF,
};


// CMD_RADIO_SETUP
// Radio Setup Command for Pre-Defined Schemes
rfc_CMD_RADIO_SETUP_t RF_cmdRadioSetup =
{
    .commandNo = 0x0802,
    .status = 0x0000,
    .pNextOp = 0, // INSERT APPLICABLE POINTER: (uint8_t*)&xxx
    .startTime = 0x00000000,
    .startTrigger.triggerType = 0x0,
    .startTrigger.bEnaCmd = 0x0,
    .startTrigger.triggerNo = 0x0,
    .startTrigger.pastTrig = 0x0,
    .condition.rule = 0x1,
    .condition.nSkip = 0x0,
    .mode = 0x01,
    .loDivider = 0x00,
    .config.frontEndMode = 0x0,
    .config.biasMode = 0x0,
    .config.analogCfgMode = 0x0,
    .config.bNoFsPowerUp = 0x0,
    .txPower = 0x001F,
    .pRegOverride = pOverrides,
};


// CMD_FS
// Frequency Synthesizer Programming Command
rfc_CMD_FS_t RF_cmdFs =
{
    .commandNo = 0x0803,
    .status = 0x0000,
    .pNextOp = 0, // INSERT APPLICABLE POINTER: (uint8_t*)&xxx
    .startTime = 0x00000000,
    .startTrigger.triggerType = 0x0,
    .startTrigger.bEnaCmd = 0x0,
    .startTrigger.triggerNo = 0x0,
    .startTrigger.pastTrig = 0x0,
    .condition.rule = 0x1,
    .condition.nSkip = 0x0,
    .frequency = 0x0965,
    .fractFreq = 0x0000,
    .synthConf.bTxMode = 0x0,
    .synthConf.refFreq = 0x0,
    .__dummy0 = 0x00,
    .__dummy1 = 0x00,
    .__dummy2 = 0x00,
    .__dummy3 = 0x0000,
};


// CMD_IEEE_RX
// IEEE 802.15.4 Receive Command
rfc_CMD_IEEE_RX_t RF_cmdIeeeRx =
{
    .commandNo = CMD_IEEE_RX,
    .status = IDLE,
    .pNextOp = NULL,
    .startTime = 0x00000000,
    .startTrigger.triggerType = TRIG_NOW,
    .condition.rule = COND_NEVER,
    .channel = 0,
    .rxConfig.bAutoFlushCrc = 0x1,
    .rxConfig.bAutoFlushIgn = 0x0,
    .rxConfig.bIncludePhyHdr = 0x0,
    .rxConfig.bIncludeCrc = 0x1,
    .rxConfig.bAppendRssi = 0x1,
    .rxConfig.bAppendCorrCrc = 0x1,
    .rxConfig.bAppendSrcInd = 0x0,
    .rxConfig.bAppendTimestamp = 0x1,
    .pRxQ = NULL,
    .pOutput = NULL,
    .frameFiltOpt.frameFiltEn = 0x0,
    .frameFiltOpt.frameFiltStop = 0x1,
    .frameFiltOpt.autoAckEn = 0x0,
    .frameFiltOpt.slottedAckEn = 0x0,
    .frameFiltOpt.autoPendEn = 0x0,
    .frameFiltOpt.defaultPend = 0x0,
    .frameFiltOpt.bPendDataReqOnly = 0x0,
    .frameFiltOpt.bPanCoord = 0x0,
    .frameFiltOpt.maxFrameVersion = 0x2,
    .frameFiltOpt.fcfReservedMask = 0x0,
    .frameFiltOpt.modifyFtFilter = 0x0,
    .frameFiltOpt.bStrictLenFilter = 0x0,
    .frameTypes.bAcceptFt0Beacon = 0x1,
    .frameTypes.bAcceptFt1Data = 0x1,
    .frameTypes.bAcceptFt2Ack = 0x1,
    .frameTypes.bAcceptFt3MacCmd = 0x1,
    .frameTypes.bAcceptFt4Reserved = 0x1,
    .frameTypes.bAcceptFt5Reserved = 0x1,
    .frameTypes.bAcceptFt6Reserved = 0x1,
    .frameTypes.bAcceptFt7Reserved = 0x1,
    .ccaOpt.ccaEnEnergy = 0x1,
    .ccaOpt.ccaEnCorr = 0x1,
    .ccaOpt.ccaEnSync = 0x1,
    .ccaOpt.ccaCorrOp = 0x1,
    .ccaOpt.ccaSyncOp = 0x0,
    .ccaOpt.ccaCorrThr = 0x3,
    .ccaRssiThr = 0x64,
    .numExtEntries = 0x00,
    .numShortEntries = 0x00,
    .pExtEntryList = NULL,
    .pShortEntryList = NULL,
    .localExtAddr = 0x0000000012345678,
    .localShortAddr = 0xABBA,
    .localPanID = 0x0000,
    .endTrigger.triggerType = TRIG_NEVER,
    .endTrigger.bEnaCmd = 0x0,
    .endTrigger.triggerNo = 0x0,
    .endTrigger.pastTrig = 0x0,
    .endTime = 0x00000000,
};


// CMD_IEEE_TX
// IEEE 802.15.4 Transmit Command
rfc_CMD_IEEE_TX_t RF_cmdIeeeTx =
{
    .commandNo = 0x2C01,
    .status = 0x0000,
    .pNextOp = 0, // INSERT APPLICABLE POINTER: (uint8_t*)&xxx
    .startTime = 0x00000000,
    .startTrigger.triggerType = 0x0,
    .startTrigger.bEnaCmd = 0x0,
    .startTrigger.triggerNo = 0x0,
    .startTrigger.pastTrig = 0x0,
    .condition.rule = 0x1,
    .condition.nSkip = 0x0,
    .txOpt.bIncludePhyHdr = 0x0,
    .txOpt.bIncludeCrc = 0x0,
    .txOpt.payloadLenMsb = 0x0,
    .payloadLen = 0x1E,
    .pPayload = 0, // INSERT APPLICABLE POINTER: (uint8_t*)&xxx
    .timeStamp = 0x00000000,
};