CC = arm-none-eabi-gcc CPP = arm-none-eabi-cpp LD = arm-none-eabi-gcc AR = arm-none-eabi-ar OBJCOPY = arm-none-eabi-objcopy OBJDUMP = arm-none-eabi-objdump NM = arm-none-eabi-nm SIZE = arm-none-eabi-size SREC_CAT = srec_cat CPU_ABS_PATH = cpu/cc26xx-cc13xx TI_XXWARE = $(CONTIKI_CPU)/$(TI_XXWARE_PATH) ### cc26xxware sources under driverlib will be added to the MODULES list TI_XXWARE_SRC = $(CPU_ABS_PATH)/$(TI_XXWARE_PATH)/driverlib ### The directory with startup sources will be added to the CONTIKI_CPU_DIRS ### and the sources therein are added to the sources list explicitly. They are ### also listed explicitly in the linker command (through TARGET_STARTFILES), ### to make sure they always get linked in the image TI_XXWARE_STARTUP_DIR = $(TI_XXWARE_PATH)/startup_files TI_XXWARE_STARTUP_SRCS = ccfg.c startup_gcc.c ### MODULES will add some of these to the include path, but we need to add ### them earlier to prevent filename clashes with Contiki core files CFLAGS += -I$(TI_XXWARE) -I$(CONTIKI)/$(TI_XXWARE_SRC) CFLAGS += -I$(TI_XXWARE)/inc MODULES += $(TI_XXWARE_SRC) LDSCRIPT = $(CONTIKI_CPU)/cc26xx.ld CFLAGS += -mcpu=cortex-m3 -mthumb -mlittle-endian CFLAGS += -ffunction-sections -fdata-sections CFLAGS += -fshort-enums -fomit-frame-pointer -fno-strict-aliasing CFLAGS += -Wall -std=c99 LDFLAGS += -mcpu=cortex-m3 -mthumb -mlittle-endian -nostartfiles LDFLAGS += -T $(LDSCRIPT) LDFLAGS += -Wl,--gc-sections,--sort-section=alignment LDFLAGS += -Wl,-Map=$(@:.elf=-$(TARGET).map),--cref,--no-warn-mismatch OBJCOPY_FLAGS += -O binary --gap-fill 0xff OBJDUMP_FLAGS += --disassemble --source --disassembler-options=force-thumb ifdef WERROR CFLAGS += -Werror endif ### Are we building with code size optimisations? ifeq ($(SMALL),1) CFLAGS += -Os else CFLAGS += -O2 endif ### If the user-specified a Node ID, pass a define ifdef NODEID CFLAGS += -DIEEE_ADDR_NODE_ID=$(NODEID) endif ### CPU-dependent cleanup files CLEAN += symbols.c symbols.h *.d *.elf *.hex ### CPU-dependent directories CONTIKI_CPU_DIRS = . dev rf-core rf-core/api $(TI_XXWARE_STARTUP_DIR) ### Use the existing debug I/O in cpu/arm/common CONTIKI_CPU_DIRS += ../arm/common/dbg-io ### CPU-dependent source files CONTIKI_CPU_SOURCEFILES += clock.c rtimer-arch.c soc-rtc.c uart.c CONTIKI_CPU_SOURCEFILES += contiki-watchdog.c aux-ctrl.c CONTIKI_CPU_SOURCEFILES += putchar.c ieee-addr.c batmon-sensor.c adc-sensor.c CONTIKI_CPU_SOURCEFILES += slip-arch.c slip.c cc26xx-uart.c lpm.c CONTIKI_CPU_SOURCEFILES += gpio-interrupt.c oscillators.c CONTIKI_CPU_SOURCEFILES += rf-core.c rf-ble.c ieee-mode.c CONTIKI_CPU_SOURCEFILES += random.c soc-trng.c DEBUG_IO_SOURCEFILES += dbg-printf.c dbg-snprintf.c dbg-sprintf.c strformat.c CONTIKI_SOURCEFILES += $(CONTIKI_CPU_SOURCEFILES) $(DEBUG_IO_SOURCEFILES) TARGET_START_SOURCEFILES += fault-handlers.c $(TI_XXWARE_STARTUP_SRCS) TARGET_STARTFILES = $(addprefix $(OBJECTDIR)/,$(call oname, $(TARGET_START_SOURCEFILES))) PYTHON = python BSL_FLAGS += -e -w -v ifdef PORT BSL_FLAGS += -p $(PORT) endif BSL = $(CONTIKI)/tools/cc2538-bsl/cc2538-bsl.py ### Don't treat the .elf as intermediate .PRECIOUS: %.elf %.hex %.bin ### Always re-build ieee-addr.o in case the command line passes a new NODEID FORCE: $(OBJECTDIR)/ieee-addr.o: ieee-addr.c FORCE | $(OBJECTDIR) $(TRACE_CC) $(Q)$(CC) $(CFLAGS) -c $< -o $@ ### Always re-build ccfg.c so changes to ccfg-conf.h will apply without having ### to make clean first $(OBJECTDIR)/ccfg.o: ccfg.c FORCE | $(OBJECTDIR) $(TRACE_CC) $(Q)$(CC) $(CFLAGS) -include "contiki-conf.h" -c $< -o $@ ### Compilation rules CUSTOM_RULE_LINK=1 %.elf: $(TARGET_STARTFILES) %.co $(PROJECT_OBJECTFILES) $(PROJECT_LIBRARIES) contiki-$(TARGET).a $(LDSCRIPT) $(TRACE_LD) $(Q)$(LD) $(LDFLAGS) ${filter-out $(LDSCRIPT) %.a,$^} ${filter %.a,$^} $(TARGET_LIBFILES) -lm -o $@ %.i16hex: %.elf $(OBJCOPY) -O ihex $< $@ %.hex: %.i16hex $(SREC_CAT) $< -intel -o $@ -intel %.bin: %.elf $(OBJCOPY) $(OBJCOPY_FLAGS) $< $@ %.lst: %.elf $(OBJDUMP) $(OBJDUMP_FLAGS) $< > $@ ### We don't really need the .hex and .bin for the .$(TARGET) but let's make ### sure they get built %.$(TARGET): %.elf %.hex %.bin cp $< $@ # a target that gives a user-friendly memory profile, taking into account the RAM # that is statically occupied by the stack as defined in the linker script # see $(LDSCRIPT) RAM_SIZE = 0x00003E00 FLASH_SIZE = 0x0001E000 STACK_SIZE = 0 %.size: %.$(TARGET) @$(SIZE) -A $< | egrep "data|bss" | awk '{s+=$$2} END {s=s+$(STACK_SIZE); f=$(RAM_SIZE)-s; printf "[RAM] used %6d, free %6d\n",s,f;}' @$(SIZE) -A $< | egrep "text|isr_vector" | awk '{s+=$$2} END {f=$(FLASH_SIZE)-s; printf "[Flash] used %6d, free %6d\n",s,f;}' ifeq ($(BOARD_SUPPORTS_BSL),1) %.upload: %.bin ifeq ($(wildcard $(BSL)), ) @echo "ERROR: Could not find the cc2538-bsl script. Did you run 'git submodule update --init' ?" else $(PYTHON) $(BSL) $(BSL_FLAGS) $< endif else %.upload: @echo "This board cannot be programmed through the ROM bootloader and therefore does not support the .upload target." endif # Check if we are running under Windows ifeq ($(HOST_OS),Windows) SERIALDUMP ?= $(CONTIKI)/tools/sky/serialdump-windows else ifeq ($(HOST_OS),Darwin) SERIALDUMP ?= $(CONTIKI)/tools/sky/serialdump-macos else # Else assume Linux SERIALDUMP ?= $(CONTIKI)/tools/sky/serialdump-linux endif endif UART_BAUDRATE = 115200 login: $(SERIALDUMP) -b$(UART_BAUDRATE) $(PORT)