//*********************************************************************************
// Generated by SmartRF Studio version 2.10.0 (build#106)
// Compatible with SimpleLink SDK version: No known SDK for this device
// Device: CC2650 Rev. 2.2
// 
//*********************************************************************************


//*********************************************************************************
// Parameter summary
// Adv. Address: 010203040506 
// Adv. Data: 255 
// BLE Channel: 17 
// Frequency: 2440 MHz
// PDU Payload length:: 30 
// TX Power: 5 dBm 
// Whitening: true 

#include <ti/devices/DeviceFamily.h>
#include DeviceFamily_constructPath(driverlib/rf_mailbox.h)
#include DeviceFamily_constructPath(driverlib/rf_common_cmd.h)
#include DeviceFamily_constructPath(driverlib/rf_ble_cmd.h)
#include <ti/drivers/rf/RF.h>
#include DeviceFamily_constructPath(rf_patches/rf_patch_cpe_ble.h)
#include DeviceFamily_constructPath(rf_patches/rf_patch_rfe_ble.h)
#include "ieee_settings.h"


// TI-RTOS RF Mode Object
RF_Mode RF_ble =
{
    .rfMode = RF_MODE_BLE,
    .cpePatchFxn = &rf_patch_cpe_ble,
    .mcePatchFxn = 0,
    .rfePatchFxn = &rf_patch_rfe_ble,
};

// TX Power table
// The RF_TxPowerTable_DEFAULT_PA_ENTRY macro is defined in RF.h and requires the following arguments:
// RF_TxPowerTable_DEFAULT_PA_ENTRY(bias, gain, boost coefficient)
// See the Technical Reference Manual for further details about the "txPower" Command field.
// The PA settings require the CCFG_FORCE_VDDR_HH = 0 unless stated otherwise.
RF_TxPowerTable_Entry txPowerTable[TX_POWER_TABLE_SIZE] = 
{ 
    {-21, RF_TxPowerTable_DEFAULT_PA_ENTRY(7, 3, 0, 6) },
    {-18, RF_TxPowerTable_DEFAULT_PA_ENTRY(9, 3, 0, 6) },
    {-15, RF_TxPowerTable_DEFAULT_PA_ENTRY(11, 3, 0, 6) },
    {-12, RF_TxPowerTable_DEFAULT_PA_ENTRY(11, 1, 0, 10) },
    {-9, RF_TxPowerTable_DEFAULT_PA_ENTRY(14, 1, 1, 12) },
    {-6, RF_TxPowerTable_DEFAULT_PA_ENTRY(18, 1, 1, 14) },
    {-3, RF_TxPowerTable_DEFAULT_PA_ENTRY(24, 1, 1, 18) },
    {0, RF_TxPowerTable_DEFAULT_PA_ENTRY(33, 1, 1, 24) },
    {1, RF_TxPowerTable_DEFAULT_PA_ENTRY(20, 0, 0, 33) },
    {2, RF_TxPowerTable_DEFAULT_PA_ENTRY(24, 0, 0, 39) },
    {3, RF_TxPowerTable_DEFAULT_PA_ENTRY(28, 0, 0, 45) },
    {4, RF_TxPowerTable_DEFAULT_PA_ENTRY(36, 0, 1, 73) },
    {5, RF_TxPowerTable_DEFAULT_PA_ENTRY(48, 0, 1, 73) },
    RF_TxPowerTable_TERMINATION_ENTRY
};


// Overrides for CMD_RADIO_SETUP
uint32_t pOverrides[] =
{
    // override_use_patch_ble_1mbps.xml
    // PHY: Use MCE ROM, RFE RAM patch
    MCE_RFE_OVERRIDE(0,0,0,1,0,0),
    // override_synth_ble_1mbps.xml
    // Synth: Set recommended RTRIM to 5
    HW_REG_OVERRIDE(0x4038,0x0035),
    // Synth: Set Fref to 3.43 MHz
    (uint32_t)0x000784A3,
    // Synth: Set loop bandwidth after lock to 80 kHz
    (uint32_t)0xA47E0583,
    // Synth: Set loop bandwidth after lock to 80 kHz
    (uint32_t)0xEAE00603,
    // Synth: Set loop bandwidth after lock to 80 kHz
    (uint32_t)0x00010623,
    // Synth: Configure PLL bias
    HW32_ARRAY_OVERRIDE(0x405C,1),
    // Synth: Configure PLL bias
    (uint32_t)0x1801F800,
    // Synth: Configure PLL latency
    HW32_ARRAY_OVERRIDE(0x402C,1),
    // Synth: Configure PLL latency
    (uint32_t)0x00608402,
    // Synth: Use 24 MHz XOSC as synth clock, enable extra PLL filtering
    (uint32_t)0x02010403,
    // Synth: Configure extra PLL filtering
    HW32_ARRAY_OVERRIDE(0x4034,1),
    // Synth: Configure extra PLL filtering
    (uint32_t)0x177F0408,
    // Synth: Configure extra PLL filtering
    (uint32_t)0x38000463,
    // override_phy_ble_1mbps.xml
    // Tx: Configure symbol shape for BLE frequency deviation requirements
    (uint32_t)0x013800C3,
    // Rx: Configure AGC reference level
    HW_REG_OVERRIDE(0x6088, 0x0045),
    // Tx: Configure pilot tone length to ensure stable frequency before start of packet
    HW_REG_OVERRIDE(0x52AC, 0x0360),
    // Tx: Compensate timing offset to match new pilot tone setting
    (uint32_t)0x01AD02A3,
    // Tx: Compensate timing offset to match new pilot tone setting
    (uint32_t)0x01680263,
    // override_frontend_id.xml
    (uint32_t)0xFFFFFFFF,
};


// CMD_RADIO_SETUP
// Radio Setup Command for Pre-Defined Schemes
rfc_CMD_RADIO_SETUP_t RF_cmdRadioSetup =
{
    .commandNo = 0x0802,
    .status = 0x0000,
    .pNextOp = 0, // INSERT APPLICABLE POINTER: (uint8_t*)&xxx
    .startTime = 0x00000000,
    .startTrigger.triggerType = 0x0,
    .startTrigger.bEnaCmd = 0x0,
    .startTrigger.triggerNo = 0x0,
    .startTrigger.pastTrig = 0x0,
    .condition.rule = 0x1,
    .condition.nSkip = 0x0,
    .mode = 0x00,
    .__dummy0 = 0x00,
    .config.frontEndMode = 0x0,
    .config.biasMode = 0x0,
    .config.analogCfgMode = 0x0,
    .config.bNoFsPowerUp = 0x0,
    .txPower = 0x9330,
    .pRegOverride = pOverrides,
};

// CMD_FS
// Frequency Synthesizer Programming Command
rfc_CMD_FS_t RF_cmdFs =
{
    .commandNo = 0x0803,
    .status = 0x0000,
    .pNextOp = 0, // INSERT APPLICABLE POINTER: (uint8_t*)&xxx
    .startTime = 0x00000000,
    .startTrigger.triggerType = 0x0,
    .startTrigger.bEnaCmd = 0x0,
    .startTrigger.triggerNo = 0x0,
    .startTrigger.pastTrig = 0x0,
    .condition.rule = 0x1,
    .condition.nSkip = 0x0,
    .frequency = 0x0988,
    .fractFreq = 0x0000,
    .synthConf.bTxMode = 0x0,
    .synthConf.refFreq = 0x0,
    .__dummy0 = 0x00,
    .__dummy1 = 0x00,
    .__dummy2 = 0x00,
    .__dummy3 = 0x0000,
};

// Structure for CMD_BLE_ADV_NC.pParams
rfc_bleAdvPar_t bleAdvPar =
{
    .pRxQ = 0, // INSERT APPLICABLE POINTER: (dataQueue_t*)&xxx
    .rxConfig.bAutoFlushIgnored = 0x0,
    .rxConfig.bAutoFlushCrcErr = 0x0,
    .rxConfig.bAutoFlushEmpty = 0x0,
    .rxConfig.bIncludeLenByte = 0x0,
    .rxConfig.bIncludeCrc = 0x0,
    .rxConfig.bAppendRssi = 0x0,
    .rxConfig.bAppendStatus = 0x0,
    .rxConfig.bAppendTimestamp = 0x0,
    .advConfig.advFilterPolicy = 0x0,
    .advConfig.deviceAddrType = 0x0,
    .advConfig.peerAddrType = 0x0,
    .advConfig.bStrictLenFilter = 0x0,
    .advConfig.rpaMode = 0x0,
    .advLen = 0x18,
    .scanRspLen = 0x00,
    .pAdvData = 0, // INSERT APPLICABLE POINTER: (uint8_t*)&xxx
    .pScanRspData = 0, // INSERT APPLICABLE POINTER: (uint8_t*)&xxx
    .pDeviceAddress = 0, // INSERT APPLICABLE POINTER: (uint16_t*)&xxx
    .pWhiteList = 0, // INSERT APPLICABLE POINTER: (uint32_t*)&xxx
    .__dummy0 = 0x0000,
    .__dummy1 = 0x00,
    .endTrigger.triggerType = 0x1,
    .endTrigger.bEnaCmd = 0x0,
    .endTrigger.triggerNo = 0x0,
    .endTrigger.pastTrig = 0x0,
    .endTime = 0x00000000,
};

// CMD_BLE_ADV_NC
// BLE Non-Connectable Advertiser Command
rfc_CMD_BLE_ADV_NC_t RF_cmdBleAdvNc =
{
    .commandNo = 0x1805,
    .status = 0x0000,
    .pNextOp = 0, // INSERT APPLICABLE POINTER: (uint8_t*)&xxx
    .startTime = 0x00000000,
    .startTrigger.triggerType = 0x0,
    .startTrigger.bEnaCmd = 0x0,
    .startTrigger.triggerNo = 0x0,
    .startTrigger.pastTrig = 0x0,
    .condition.rule = 0x1,
    .condition.nSkip = 0x0,
    .channel = 0x8C,
    .whitening.init = 0x51,
    .whitening.bOverride = 0x1,
    .pParams = &bleAdvPar,
    .pOutput = 0, // INSERT APPLICABLE POINTER: (uint8_t*)&xxx
};

// Structure for CMD_BLE_GENERIC_RX.pParams
rfc_bleGenericRxPar_t bleGenericRxPar =
{
    .pRxQ = 0, // INSERT APPLICABLE POINTER: (dataQueue_t*)&xxx
    .rxConfig.bAutoFlushIgnored = 0x0,
    .rxConfig.bAutoFlushCrcErr = 0x0,
    .rxConfig.bAutoFlushEmpty = 0x0,
    .rxConfig.bIncludeLenByte = 0x1,
    .rxConfig.bIncludeCrc = 0x1,
    .rxConfig.bAppendRssi = 0x1,
    .rxConfig.bAppendStatus = 0x1,
    .rxConfig.bAppendTimestamp = 0x0,
    .bRepeat = 0x01,
    .__dummy0 = 0x0000,
    .accessAddress = 0x8E89BED6,
    .crcInit0 = 0x55,
    .crcInit1 = 0x55,
    .crcInit2 = 0x55,
    .endTrigger.triggerType = 0x1,
    .endTrigger.bEnaCmd = 0x0,
    .endTrigger.triggerNo = 0x0,
    .endTrigger.pastTrig = 0x0,
    .endTime = 0x00000001,
};

// CMD_BLE_GENERIC_RX
// BLE Generic Receiver Command
rfc_CMD_BLE_GENERIC_RX_t RF_cmdBleGenericRx =
{
    .commandNo = 0x1809,
    .status = 0x0000,
    .pNextOp = 0, // INSERT APPLICABLE POINTER: (uint8_t*)&xxx
    .startTime = 0x00000000,
    .startTrigger.triggerType = 0x0,
    .startTrigger.bEnaCmd = 0x0,
    .startTrigger.triggerNo = 0x0,
    .startTrigger.pastTrig = 0x0,
    .condition.rule = 0x1,
    .condition.nSkip = 0x0,
    .channel = 0x8C,
    .whitening.init = 0x51,
    .whitening.bOverride = 0x1,
    .pParams = &bleGenericRxPar,
    .pOutput = 0, // INSERT APPLICABLE POINTER: (uint8_t*)&xxx
};