/*
 * Copyright (c) 2006, Technical University of Munich
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. Neither the name of the Institute nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 * This file is part of the Contiki operating system.
 *
 * @(#)$$
 */

/**
 * \file
 *         Configuration for sample STK 501 Contiki kernel
 *
 * \author
 *         Simon Barner <barner@in.tum.de
 */

#ifndef CONTIKI_CONF_H_
#define CONTIKI_CONF_H_

#include <stdint.h>

//typedef int32_t s32_t;

/*
 * MCU and clock rate
 */
 /* Platform name, type, and MCU clock rate */
#define PLATFORM_NAME  "RCB"
#define PLATFORM_TYPE  RCB_B
#ifndef F_CPU
#define F_CPU          8000000UL
#endif

/* The AVR tick interrupt usually is done with an 8 bit counter around 128 Hz.
 * 125 Hz needs slightly more overhead during the interrupt, as does a 32 bit
 * clock_time_t.
 */
/* Clock ticks per second */
#define CLOCK_CONF_SECOND 125
#if 1
/* 16 bit counter overflows every ~10 minutes */
typedef unsigned short clock_time_t;
#define CLOCK_LT(a,b)  ((signed short)((a)-(b)) < 0)
#define INFINITE_TIME 0xffff
#define RIME_CONF_BROADCAST_ANNOUNCEMENT_MAX_TIME INFINITE_TIME/CLOCK_CONF_SECOND /* Default uses 600 */
#define COLLECT_CONF_BROADCAST_ANNOUNCEMENT_MAX_TIME INFINITE_TIME/CLOCK_CONF_SECOND /* Default uses 600 */
#else
typedef unsigned long clock_time_t;
#define CLOCK_LT(a,b)  ((signed long)((a)-(b)) < 0)
#define INFINITE_TIME 0xffffffff
#endif
/* These routines are not part of the contiki core but can be enabled in cpu/avr/clock.c */
void clock_delay_msec(uint16_t howlong);
void clock_adjust_ticks(clock_time_t howmany);

/* COM port to be used for SLIP connection */
#define SLIP_PORT RS232_PORT_0

/* Pre-allocated memory for loadable modules heap space (in bytes)*/
#define MMEM_CONF_SIZE 256

/* Use the following address for code received via the codeprop
 * facility
 */
#define EEPROMFS_ADDR_CODEPROP 0x8000

#define CCIF
#define CLIF

#define LINKADDR_CONF_SIZE       8
#define PACKETBUF_CONF_HDR_SIZE    48	/* Choose a buffersize != 0 for the messages which should be sended over the wireless interface */

/* Uncomment this lines to activate the specific drivers */
//#define NETSTACK_CONF_NETWORK     rime_driver		
//#define NETSTACK_CONF_MAC         nullmac_driver
//#define NETSTACK_CONF_RDC         sicslowmac_driver	
//#define NETSTACK_CONF_FRAMER      framer_802154	/* Framer for 802.15.4 Medium Access Control */
#define NETSTACK_CONF_RADIO       rf230_driver		/* Select the wireless driver, otherwise contiki would operate with the "nulldriver" which does nothing */

#define RF230_CONF_AUTOACK        1
#define CXMAC_CONF_ANNOUNCEMENTS  10
#define NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE 8

/* 211 bytes per queue buffer. Burst mode will need 15 for a 1280 byte MTU */
#define QUEUEBUF_CONF_NUM         15
/* 54 bytes per queue ref buffer */
#define QUEUEBUF_CONF_REF_NUM     2

#define SICSLOWPAN_CONF_COMPRESSION       SICSLOWPAN_COMPRESSION_HC06
#define SICSLOWPAN_CONF_MAX_ADDR_CONTEXTS 2
#define SICSLOWPAN_CONF_FRAG              1

#define SICSLOWPAN_CONF_MAXAGE 5

#define UIP_CONF_LL_802154       1
#define UIP_CONF_LLH_LEN         0

#define UIP_CONF_MAX_CONNECTIONS 2
#define UIP_CONF_MAX_LISTENPORTS 2
#define UIP_CONF_UDP_CONNS       2

#define UIP_CONF_IP_FORWARD      0
#define UIP_CONF_FWCACHE_SIZE    0

#define UIP_CONF_IPV6_CHECKS     1
#define UIP_CONF_IPV6_QUEUE_PKT  0
#define UIP_CONF_IPV6_REASSEMBLY 0
#define UIP_CONF_NETIF_MAX_ADDRESSES  3
#if NETSTACK_CONF_WITH_IPV6 //tcpip.c error on ipv4 build if UIP_CONF_ICMP6 defined
#define UIP_CONF_ICMP6 1
#endif

#define UIP_CONF_UDP             1
#define UIP_CONF_UDP_CHECKSUMS   1

#define UIP_CONF_TCP             1
#define UIP_CONF_TCP_SPLIT       0

/* These names are deprecated, use C99 names. */
/*typedef unsigned char u8_t;
typedef unsigned short u16_t;
typedef unsigned long u32_t;
*/
typedef unsigned short uip_stats_t;
typedef unsigned long off_t;

#endif /* CONTIKI_CONF_H_ */