nes-proj/arch/platform/simplelink/cc13xx-cc26xx/platform.c
Edvard Pettersen dff3e760b8 Fix correct LOG_INFO in platform.c
When logging info about channel and PANID a newline is added for each
logging statement. It should only add a newline for the first LOG_INFO.
2018-11-29 16:42:45 +01:00

276 lines
7.9 KiB
C

/*
* Copyright (c) 2018, Texas Instruments Incorporated - http://www.ti.com/
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/**
* \addtogroup cc13xx-cc26xx-platform
* @{
*
* \file
* Setup the SimpleLink CC13xx/CC26xx ecosystem with the
* Contiki environment.
* \author
* Edvard Pettersen <e.pettersen@ti.com>
*/
/*---------------------------------------------------------------------------*/
#include "contiki.h"
#include "contiki-net.h"
#include "sys/clock.h"
#include "sys/rtimer.h"
#include "sys/node-id.h"
#include "sys/platform.h"
#include "dev/button-hal.h"
#include "dev/gpio-hal.h"
#include "dev/serial-line.h"
#include "dev/leds.h"
#include "net/mac/framer/frame802154.h"
#include "lib/random.h"
#include "lib/sensors.h"
/*---------------------------------------------------------------------------*/
#include <Board.h>
#include <NoRTOS.h>
#include <ti/devices/DeviceFamily.h>
#include DeviceFamily_constructPath(driverlib/driverlib_release.h)
#include DeviceFamily_constructPath(driverlib/chipinfo.h)
#include DeviceFamily_constructPath(driverlib/vims.h)
#include <ti/drivers/dpl/HwiP.h>
#include <ti/drivers/I2C.h>
#include <ti/drivers/NVS.h>
#include <ti/drivers/PIN.h>
#include <ti/drivers/pin/PINCC26XX.h>
#include <ti/drivers/Power.h>
#include <ti/drivers/SPI.h>
#include <ti/drivers/TRNG.h>
#include <ti/drivers/UART.h>
/*---------------------------------------------------------------------------*/
#include "board-peripherals.h"
#include "uart0-arch.h"
#include "trng-arch.h"
/*---------------------------------------------------------------------------*/
#include "rf/rf.h"
#include "rf/ble-beacond.h"
#include "rf/ieee-addr.h"
/*---------------------------------------------------------------------------*/
#include <stdio.h>
#include <string.h>
/*---------------------------------------------------------------------------*/
/* Log configuration */
#include "sys/log.h"
#define LOG_MODULE "CC13xx/CC26xx"
#define LOG_LEVEL LOG_LEVEL_MAIN
/*---------------------------------------------------------------------------*/
/*
* Board-specific initialization function. This function is defined in
* the <BOARD>_fxns.c file.
*/
extern void Board_initHook(void);
/*---------------------------------------------------------------------------*/
/*
* \brief Fade a specified LED.
*/
static void
fade(PIN_Id pin)
{
volatile uint32_t i;
uint32_t k;
uint32_t j;
uint32_t pivot = 800;
uint32_t pivot_half = pivot / 2;
for(k = 0; k < pivot; ++k) {
j = (k > pivot_half) ? pivot - k : k;
PINCC26XX_setOutputValue(pin, 1);
for(i = 0; i < j; ++i) {
__asm__ __volatile__ ("nop");
}
PINCC26XX_setOutputValue(pin, 0);
for(i = 0; i < pivot_half - j; ++i) {
__asm__ __volatile__ ("nop");
}
}
}
/*---------------------------------------------------------------------------*/
/*
* \brief Configure RF params for the radio driver.
*/
static void
set_rf_params(void)
{
uint8_t ext_addr[8];
uint16_t short_addr;
memset(ext_addr, 0x0, sizeof(ext_addr));
ieee_addr_cpy_to(ext_addr, sizeof(ext_addr));
/* Short address is the last two bytes of the MAC address */
short_addr = (((uint16_t)ext_addr[7] << 0) |
((uint16_t)ext_addr[6] << 8));
NETSTACK_RADIO.set_value(RADIO_PARAM_PAN_ID, IEEE802154_PANID);
NETSTACK_RADIO.set_value(RADIO_PARAM_16BIT_ADDR, short_addr);
NETSTACK_RADIO.set_object(RADIO_PARAM_64BIT_ADDR, ext_addr, sizeof(ext_addr));
}
/*---------------------------------------------------------------------------*/
void
platform_init_stage_one(void)
{
DRIVERLIB_ASSERT_CURR_RELEASE();
/* Enable flash cache */
VIMSModeSet(VIMS_BASE, VIMS_MODE_ENABLED);
/* Configure round robin arbitration and prefetching */
VIMSConfigure(VIMS_BASE, true, true);
Power_init();
/* BoardGpioInitTable declared in Board.h */
if(PIN_init(BoardGpioInitTable) != PIN_SUCCESS) {
/*
* Something is seriously wrong if PIN initialization of the Board GPIO
* table fails.
*/
for(;;) { /* hang */ }
}
/* Perform board-specific initialization */
Board_initHook();
/* Contiki drivers init */
gpio_hal_init();
leds_init();
fade(Board_PIN_LED0);
/* TI Drivers init */
#if TI_UART_CONF_ENABLE
UART_init();
#endif
#if TI_I2C_CONF_ENABLE
I2C_init();
#endif
#if TI_SPI_CONF_ENABLE
SPI_init();
#endif
#if TI_NVS_CONF_ENABLE
NVS_init();
#endif
TRNG_init();
fade(Board_PIN_LED1);
/* NoRTOS must be called last */
NoRTOS_start();
}
/*---------------------------------------------------------------------------*/
void
platform_init_stage_two(void)
{
serial_line_init();
#if TI_UART_CONF_UART0_ENABLE
uart0_init();
#endif
#if BUILD_WITH_SHELL
uart0_set_callback(serial_line_input_byte);
#endif
/* Use TRNG to seed PRNG. If TRNG fails, use a hard-coded seed. */
unsigned short seed = 0;
if(!trng_rand((uint8_t *)&seed, sizeof(seed), TRNG_WAIT_FOREVER)) {
/* Default to some hard-coded seed. */
seed = 0x1234;
}
random_init(seed);
/* Populate linkaddr_node_addr */
ieee_addr_cpy_to(linkaddr_node_addr.u8, LINKADDR_SIZE);
button_hal_init();
fade(Board_PIN_LED0);
}
/*---------------------------------------------------------------------------*/
void
platform_init_stage_three(void)
{
#if RF_CONF_BLE_BEACON_ENABLE
rf_ble_beacond_init();
#endif
radio_value_t chan = 0;
radio_value_t pan = 0;
set_rf_params();
LOG_DBG("With DriverLib v%u.%u\n", DRIVERLIB_RELEASE_GROUP,
DRIVERLIB_RELEASE_BUILD);
LOG_DBG("IEEE 802.15.4: %s, Sub-1 GHz: %s, BLE: %s\n",
ChipInfo_SupportsIEEE_802_15_4() ? "Yes" : "No",
ChipInfo_SupportsPROPRIETARY() ? "Yes" : "No",
ChipInfo_SupportsBLE() ? "Yes" : "No");
#if (RF_MODE == RF_MODE_SUB_1_GHZ)
LOG_INFO("Operating frequency on Sub-1 GHz\n");
#elif (RF_MODE == RF_MODE_2_4_GHZ)
LOG_INFO("Operating frequency on 2.4 GHz\n");
#endif
NETSTACK_RADIO.get_value(RADIO_PARAM_CHANNEL, &chan);
LOG_INFO("RF: Channel %d", chan);
if(NETSTACK_RADIO.get_value(RADIO_PARAM_PAN_ID, &pan) == RADIO_RESULT_OK) {
LOG_INFO_(", PANID 0x%04X", pan);
}
LOG_INFO_("\n");
LOG_INFO("Node ID: %d\n", node_id);
#if BOARD_CONF_SENSORS_ENABLE
process_start(&sensors_process, NULL);
#endif
fade(Board_PIN_LED1);
}
/*---------------------------------------------------------------------------*/
void
platform_idle(void)
{
/* Drop to some low power mode */
Power_idleFunc();
}
/*---------------------------------------------------------------------------*/
/**
* @}
*/