nes-proj/arch/platform/simplelink/cc13xx-cc26xx/srf06/button-sensor-arch.c

99 lines
4.2 KiB
C

/*
* Copyright (c) 2018, Texas Instruments Incorporated - http://www.ti.com/
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/**
* \addtogroup srf06-peripherals
* @{
*
* \file
* Button HAL definitions for the SmartRF06 Evaluation Board's buttons.
* Common across all CC13xx/CC26xx devices on SmartRF06 EB.
* \author
* Edvard Pettersen <e.pettersen@ti.com>
*/
/*---------------------------------------------------------------------------*/
#include "contiki.h"
#include "dev/button-hal.h"
/*---------------------------------------------------------------------------*/
#include <Board.h>
/*---------------------------------------------------------------------------*/
/* Key select button */
BUTTON_HAL_BUTTON(
key_select, /**< Name */
"Key Select", /**< Description */
Board_KEY_SELECT, /**< PIN */
GPIO_HAL_PIN_CFG_PULL_UP |
GPIO_HAL_PIN_CFG_HYSTERESIS, /**< Pull configuration */
BUTTON_HAL_ID_KEY_SELECT, /**< Unique ID */
true); /**< Negative logic */
/* Key up button */
BUTTON_HAL_BUTTON(
key_up, /**< Name */
"Key Up", /**< Description */
Board_KEY_UP, /**< PIN */
GPIO_HAL_PIN_CFG_PULL_UP |
GPIO_HAL_PIN_CFG_HYSTERESIS, /**< Pull configuration */
BUTTON_HAL_ID_KEY_UP, /**< Unique ID */
true); /**< Negative logic */
/* Key down button */
BUTTON_HAL_BUTTON(
key_down, /**< Name */
"Key Down", /**< Description */
Board_KEY_DOWN, /**< PIN */
GPIO_HAL_PIN_CFG_PULL_UP |
GPIO_HAL_PIN_CFG_HYSTERESIS, /**< Pull configuration */
BUTTON_HAL_ID_KEY_DOWN, /**< Unique ID */
true); /**< Negative logic */
/* Key left button */
BUTTON_HAL_BUTTON(
key_left, /**< Name */
"Key Left", /**< Description */
Board_KEY_LEFT, /**< PIN */
GPIO_HAL_PIN_CFG_PULL_UP |
GPIO_HAL_PIN_CFG_HYSTERESIS, /**< Pull configuration */
BUTTON_HAL_ID_KEY_LEFT, /**< Unique ID */
true); /**< Negative logic */
/* Key right button */
BUTTON_HAL_BUTTON(
key_right, /**< Name */
"Key Right", /**< Description */
Board_KEY_RIGHT, /**< PIN */
GPIO_HAL_PIN_CFG_PULL_UP |
GPIO_HAL_PIN_CFG_HYSTERESIS, /**< Pull configuration */
BUTTON_HAL_ID_KEY_RIGHT, /**< Unique ID */
true); /**< Negative logic */
/*---------------------------------------------------------------------------*/
BUTTON_HAL_BUTTONS(&key_select, &key_up, &key_down, &key_left, &key_right);
/*---------------------------------------------------------------------------*/
/** @} */