nes-proj/arch/platform/simplelink/cc13xx-cc26xx/launchpad/board-conf.h
2018-09-11 17:39:17 +02:00

124 lines
4.4 KiB
C

/*
* Copyright (c) 2018, Texas Instruments Incorporated - http://www.ti.com/
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/**
* \addtogroup cc13xx-cc26xx-platform
* @{
*
* \defgroup launchpad-peripherals LaunchPad peripherals
*
* Defines related to configuring LaunchPad peripherals. All LaunchPads
* are identical to a very large extent. Everything documented within this
* group applies to both sensortags
*
* @{
*
* \file
* Header file with definitions related to LaunchPad boards.
* \author
* Edvard Pettersen <e.pettersen@ti.com>
* \note
* This file should not be included directly
*/
/*---------------------------------------------------------------------------*/
#ifndef BOARD_CONF_H_
#define BOARD_CONF_H_
/*---------------------------------------------------------------------------*/
#include "contiki-conf.h"
/*---------------------------------------------------------------------------*/
/**
* \name LED configurations for the dev/leds.h API.
*
* Those values are not meant to be modified by the user
* @{
*/
#define PLATFORM_HAS_LEDS 1
#define LEDS_CONF_COUNT 2
#define LEDS_CONF_RED 0
#define LEDS_CONF_GREEN 1
#define LEDS_CONF_ALL ((1 << LEDS_CONF_COUNT) - 1)
/** @} */
/*---------------------------------------------------------------------------*/
/**
* \name Button configurations for the dev/button-hal.h API.
*
* Those values are not meant to be modified by the user
* @{
*/
#define PLATFORM_HAS_BUTTON 1
#define PLATFORM_SUPPORTS_BUTTON_HAL 1
#define BUTTON_HAL_ID_KEY_LEFT 0
#define BUTTON_HAL_ID_KEY_RIGHT 1
/** @} */
/*---------------------------------------------------------------------------*/
/**
* \name LaunchPad does not have any sensors.
*
* Those values are not meant to be modified by the user
* @{
*/
#define BOARD_CONF_HAS_SENSORS 0
/** @} */
/*---------------------------------------------------------------------------*/
/**
* \name The external flash SPI CS pin, defined in Board.h.
*
* Note that SPI SCK, MOSI and MISO does not need to be defined, as they are
* implicitly defined via the Board_SPI0 controller.
*
* Those values are not meant to be modified by the user
* @{
*/
#if TI_SPI_CONF_SPI0_ENABLE
#define EXT_FLASH_SPI_CONTROLLER Board_SPI0
#define EXT_FLASH_SPI_PIN_SCK Board_SPI0_SCK
#define EXT_FLASH_SPI_PIN_MOSI Board_SPI0_MOSI
#define EXT_FLASH_SPI_PIN_MISO Board_SPI0_MISO
#define EXT_FLASH_SPI_PIN_CS Board_SPI_FLASH_CS
#define EXT_FLASH_DEVICE_ID 0x14
#define EXT_FLASH_MID 0xC2
#define EXT_FLASH_PROGRAM_PAGE_SIZE 256
#define EXT_FLASH_ERASE_SECTOR_SIZE 4096
#endif /* TI_SPI_CONF_SPI0_ENABLE */
/** @} */
/*---------------------------------------------------------------------------*/
#endif /* BOARD_CONF_H_ */
/*---------------------------------------------------------------------------*/
/**
* @}
* @}
*/