History

Mohamed seliem 452666b43e add missing include		2016-12-04 03:29:49 +02:00
..
dev	Moving the avr-rss2 platform examples to the global examples	2016-05-14 12:05:19 +02:00
resources	Moving the avr-rss2 platform examples to the global examples	2016-05-14 12:05:19 +02:00
coap-client.c	Fix the leftover mentions of aaaa as a prefix to be UIP_DS6_DEFAULT_PREFIX (now fd00)	2016-12-04 03:29:49 +02:00
coap-server.c	add missing include	2016-12-04 03:29:49 +02:00
dc-rpl-coap.csc	Moving the avr-rss2 platform examples to the global examples	2016-05-14 12:05:19 +02:00
er-dc-test.h	Moving the avr-rss2 platform examples to the global examples	2016-05-14 12:05:19 +02:00
Makefile	Correct paths when moving examples for regession tests	2016-05-14 22:48:09 +02:00
project-conf.h	Moving the avr-rss2 platform examples to the global examples	2016-05-14 12:05:19 +02:00
README.md	Moving the avr-rss2 platform examples to the global examples	2016-05-14 12:05:19 +02:00

README.md

Example: mockup of DC converter functionality for IoT-grid.

This example imitates DC converter functionality for IoT-grid. We use standard IoT protocol stack with CoAP application-level protocol. The settings are as follows.

APPLICATION: CoAP
TRANSPORT: UDP
NETWORK: IPv6/RPL
ADAPTATION: 6LoWPAN
MAC: nullmac_driver
RADIO DUTY CYCLE: nullrdc_driver
PHYSICAL: IEEE 802.15.4

CoAP resources

We define a CoAP resource for each functionality of DC converter. Since each functionality may have several parameters, we define each resource as a vector of parameters as follows.

/dcdc/status read-only parameters for power monitoring. It also support periodic monitoring through CoAP observe option. ** 0 VOUT Output voltage ** 1 VIN Input voltage ** 2 IOUT Output current ** 3 IIN Input current
/dcdc/vdc configurable parameters for voltage droop control function. ** 0 VGRID Desired grid output voltage ** 1 SLOPE Slope of voltage droop control function ** 2 PMAX Maximum output power allowed
/dcdc/hwcfg configurable parameters for DC converter hardware. ** 0 VMAX Maximum output voltage allowed ** 1 IMAX Maximum output current allowed

Each functionality is implemented as a sensor type device. They are located in "dev" folder.

dc-status-sensor for /dcdc/status
dc-vdc-sensor for /dcdc/vdc
dc-hw-sensor for /dcdc/hwcfg

The corresponding CoAP handler for each resource is defined in "resources" folder.

res-dc-status-obs for /dcdc/status
res-dc-vdc for /dcdc/vdc
res-dc-hwcfg for /dcdc/hwcfg

coap-server.c

The server acts as the RPL root node. It has 3 CoAP resources as described above.

coap-client.c

The client periodically send a CoAP command (either GET or PUT) to monitor/update values of parameters of a resource.

project-conf.h

This file contains definitions needed for this IoT-grid example as follows.

Enable IPv6 network stack
Set nullrdc_driver
Set nullmac_driver
Activate CoAP observe client library (COAP_OBSERVE_CLIENT = 1)
Increase the maximum number of observee and maximum number of open transaction to 10 (COAP_MAX_OPEN_TRANSACTIONS and COAP_MAX_OBSERVEES = 10)