nes-proj/arch/cpu/cc26x0-cc13x0/cc13xx-cc26xx-conf.h
2019-01-09 16:54:03 +02:00

221 lines
7.1 KiB
C

/*
* Copyright (c) 2017, George Oikonomou - http://www.spd.gr
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*---------------------------------------------------------------------------*/
/**
* \addtogroup cc26xx
* @{
*
* \file
* Header with configuration defines common to all CC13xx/CC26xx platforms
*/
/*---------------------------------------------------------------------------*/
#ifndef CC13XX_CC26XX_CONF_H_
#define CC13XX_CC26XX_CONF_H_
/*---------------------------------------------------------------------------*/
/**
* \name Network Stack Configuration
*
* @{
*/
/*
* If set, the systems keeps the HF crystal oscillator on even when the radio is off.
* You need to set this to 1 to use TSCH with its default 2.2ms or larger guard time.
*/
#ifndef CC2650_FAST_RADIO_STARTUP
#define CC2650_FAST_RADIO_STARTUP (MAC_CONF_WITH_TSCH)
#endif
/* Number of Prop Mode RX buffers */
#ifndef PROP_MODE_CONF_RX_BUF_CNT
#define PROP_MODE_CONF_RX_BUF_CNT 4
#endif
/*
* Auto-configure Prop-mode radio if we are running on CC13xx, unless the
* project has specified otherwise. Depending on the final mode, determine a
* default channel (again, if unspecified) and configure RDC params
*/
#if CPU_FAMILY_CC13X0
#ifndef CC13XX_CONF_PROP_MODE
#define CC13XX_CONF_PROP_MODE 1
#endif /* CC13XX_CONF_PROP_MODE */
#endif /* CPU_FAMILY_CC13X0 */
#if CC13XX_CONF_PROP_MODE
#ifndef NETSTACK_CONF_RADIO
#define NETSTACK_CONF_RADIO prop_mode_driver
#endif /* NETSTACK_CONF_RADIO */
/* Channels count from 0 upwards in IEEE 802.15.4g */
#ifndef IEEE802154_CONF_DEFAULT_CHANNEL
#define IEEE802154_CONF_DEFAULT_CHANNEL 0
#endif /* IEEE802154_CONF_DEFAULT_CHANNEL */
#ifndef CSMA_CONF_ACK_WAIT_TIME
#define CSMA_CONF_ACK_WAIT_TIME (RTIMER_SECOND / 400)
#endif /* CSMA_CONF_ACK_WAIT_TIME */
#ifndef CSMA_CONF_AFTER_ACK_DETECTED_WAIT_TIME
#define CSMA_CONF_AFTER_ACK_DETECTED_WAIT_TIME (RTIMER_SECOND / 1000)
#endif /* CSMA_CONF_AFTER_ACK_DETECTED_WAIT_TIME */
#ifndef CSMA_CONF_SEND_SOFT_ACK
#define CSMA_CONF_SEND_SOFT_ACK 1
#endif /* CSMA_CONF_SEND_SOFT_ACK */
#else /* CC13XX_CONF_PROP_MODE */
#ifndef NETSTACK_CONF_RADIO
#define NETSTACK_CONF_RADIO ieee_mode_driver
#endif
#define CSMA_CONF_SEND_SOFT_ACK 0
#endif /* CC13XX_CONF_PROP_MODE */
#define NETSTACK_RADIO_MAX_PAYLOAD_LEN 125
/* Platform-specific (H/W) AES implementation */
#ifndef AES_128_CONF
#define AES_128_CONF cc26xx_aes_128_driver
#endif /* AES_128_CONF */
/** @} */
/*---------------------------------------------------------------------------*/
/**
* \name IEEE address configuration
*
* Used to generate our link-local & IPv6 address
* @{
*/
/**
* \brief Location of the IEEE address
* 0 => Read from InfoPage,
* 1 => Use a hardcoded address, configured by IEEE_ADDR_CONF_ADDRESS
*/
#ifndef IEEE_ADDR_CONF_HARDCODED
#define IEEE_ADDR_CONF_HARDCODED 0
#endif
/**
* \brief The hardcoded IEEE address to be used when IEEE_ADDR_CONF_HARDCODED
* is defined as 1
*/
#ifndef IEEE_ADDR_CONF_ADDRESS
#define IEEE_ADDR_CONF_ADDRESS { 0x00, 0x12, 0x4B, 0x00, 0x89, 0xAB, 0xCD, 0xEF }
#endif
/** @} */
/*---------------------------------------------------------------------------*/
/**
* \name RF configuration
*
* @{
*/
/* RF Config */
#ifndef IEEE_MODE_CONF_AUTOACK
#define IEEE_MODE_CONF_AUTOACK 1 /**< RF H/W generates ACKs */
#endif
#ifndef IEEE_MODE_CONF_PROMISCOUS
#define IEEE_MODE_CONF_PROMISCOUS 0 /**< 1 to enable promiscous mode */
#endif
#ifndef RF_BLE_CONF_ENABLED
#define RF_BLE_CONF_ENABLED 0 /**< 0 to disable BLE support */
#endif
/** @} */
/*---------------------------------------------------------------------------*/
/**
* \name Character I/O Configuration
*
* @{
*/
#ifndef CC26XX_UART_CONF_ENABLE
#define CC26XX_UART_CONF_ENABLE 1 /**< Enable/Disable UART I/O */
#endif
#ifndef CC26XX_UART_CONF_BAUD_RATE
#define CC26XX_UART_CONF_BAUD_RATE 115200 /**< Default UART0 baud rate */
#endif
/* Enable I/O over the Debugger Devpack - Only relevant for the SensorTag */
#ifndef BOARD_CONF_DEBUGGER_DEVPACK
#define BOARD_CONF_DEBUGGER_DEVPACK 1
#endif
#ifndef SLIP_ARCH_CONF_ENABLED
/*
* Determine whether we need SLIP
* This will keep working while UIP_FALLBACK_INTERFACE and CMD_CONF_OUTPUT
* keep using SLIP
*/
#if defined(UIP_FALLBACK_INTERFACE) || defined(CMD_CONF_OUTPUT)
#define SLIP_ARCH_CONF_ENABLED 1
#endif
#endif
/** @} */
/*---------------------------------------------------------------------------*/
/**
* \name JTAG interface configuration
*
* Enable/Disable the JTAG DAP and TAP interfaces on the chip.
* Setting this to 0 will disable access to the debug interface
* to secure deployed images.
* @{
*/
#ifndef CCXXWARE_CONF_JTAG_INTERFACE_ENABLE
#define CCXXWARE_CONF_JTAG_INTERFACE_ENABLE 1
#endif
/** @} */
/*---------------------------------------------------------------------------*/
/**
* \name ROM Bootloader configuration
*
* Enable/Disable the ROM bootloader in your image, if the board supports it.
* Look in board.h to choose the DIO and corresponding level that will cause
* the chip to enter bootloader mode.
* @{
*/
/* Backward compatibility */
#ifdef ROM_BOOTLOADER_ENABLE
#define CCXXWARE_CONF_ROM_BOOTLOADER_ENABLE ROM_BOOTLOADER_ENABLE
#endif
#ifndef CCXXWARE_CONF_ROM_BOOTLOADER_ENABLE
#define CCXXWARE_CONF_ROM_BOOTLOADER_ENABLE 1
#endif
/** @} */
/*---------------------------------------------------------------------------*/
#endif /* CC13XX_CC26XX_CONF_H_ */
/*---------------------------------------------------------------------------*/
/** @} */