nes-proj/cpu/rl78/adf7023/ADF7023.h
Ian Martin 174d4dd80c Adds support for ADF7023 sub-GHz radio from Analog Devices and RL78 series MCU from Renesas.
This example platform for this port is the EVAL-ADF7XXXMB4Z w/ radio
daughter cards:

    http://www.analog.com/en/evaluation/eval-adf7023/eb.html

See the platform readme for usage and platform information:

    https://github.com/contiki-os/contiki/tree/master/platform/eval-adf7xxxmb4z/readme.md

All files provided by Analog Devices for this port are released under
the same license as Contiki and copyright Analog Devices Inc. per
agreement between Redwire Consulting, LLC and Analog Devices Inc. (SOW 08122013)
2014-01-04 18:56:51 -05:00

411 lines
21 KiB
C

/*
* Copyright (c) 2014, Analog Devices, Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/**
* \author Dragos Bogdan <Dragos.Bogdan@Analog.com>
* Contributors: Ian Martin <martini@redwirellc.com>
*/
#ifndef __ADF7023_H__
#define __ADF7023_H__
/* Status Word */
#define STATUS_SPI_READY (0x1 << 7)
#define STATUS_IRQ_STATUS (0x1 << 6)
#define STATUS_CMD_READY (0x1 << 5)
#define STATUS_FW_STATE (0x1F << 0)
/* FW_STATE Description */
#define FW_STATE_INIT 0x0F
#define FW_STATE_BUSY 0x00
#define FW_STATE_PHY_OFF 0x11
#define FW_STATE_PHY_ON 0x12
#define FW_STATE_PHY_RX 0x13
#define FW_STATE_PHY_TX 0x14
#define FW_STATE_PHY_SLEEP 0x06
#define FW_STATE_GET_RSSI 0x05
#define FW_STATE_IR_CAL 0x07
#define FW_STATE_AES_DECRYPT_INIT 0x08
#define FW_STATE_AES_DECRYPT 0x09
#define FW_STATE_AES_ENCRYPT 0x0A
/* SPI Memory Access Commands */
#define SPI_MEM_WR 0x18 /* Write data to packet RAM sequentially. */
#define SPI_MEM_RD 0x38 /* Read data from packet RAM sequentially. */
#define SPI_MEMR_WR 0x08 /* Write data to packet RAM nonsequentially. */
#define SPI_MEMR_RD 0x28 /* Read data from packet RAM nonsequentially. */
#define SPI_NOP 0xFF /* No operation. */
/* Radio Controller Commands */
#define CMD_SYNC 0xA2 /* This is an optional command. It is not necessary to use it during device initialization */
#define CMD_PHY_OFF 0xB0 /* Performs a transition of the device into the PHY_OFF state. */
#define CMD_PHY_ON 0xB1 /* Performs a transition of the device into the PHY_ON state. */
#define CMD_PHY_RX 0xB2 /* Performs a transition of the device into the PHY_RX state. */
#define CMD_PHY_TX 0xB5 /* Performs a transition of the device into the PHY_TX state. */
#define CMD_PHY_SLEEP 0xBA /* Performs a transition of the device into the PHY_SLEEP state. */
#define CMD_CONFIG_DEV 0xBB /* Configures the radio parameters based on the BBRAM values. */
#define CMD_GET_RSSI 0xBC /* Performs an RSSI measurement. */
#define CMD_BB_CAL 0xBE /* Performs a calibration of the IF filter. */
#define CMD_HW_RESET 0xC8 /* Performs a full hardware reset. The device enters the PHY_SLEEP state. */
#define CMD_RAM_LOAD_INIT 0xBF /* Prepares the program RAM for a firmware module download. */
#define CMD_RAM_LOAD_DONE 0xC7 /* Performs a reset of the communications processor after download of a firmware module to program RAM. */
#define CMD_IR_CAL 0xBD /* Initiates an image rejection calibration routine. */
#define CMD_AES_ENCRYPT 0xD0 /* Performs an AES encryption on the transmit payload data stored in packet RAM. */
#define CMD_AES_DECRYPT 0xD2 /* Performs an AES decryption on the received payload data stored in packet RAM. */
#define CMD_AES_DECRYPT_INIT 0xD1 /* Initializes the internal variables required for AES decryption. */
#define CMD_RS_ENCODE_INIT 0xD1 /* Initializes the internal variables required for the Reed Solomon encoding. */
#define CMD_RS_ENCODE 0xD0 /* Calculates and appends the Reed Solomon check bytes to the transmit payload data stored in packet RAM. */
#define CMD_RS_DECODE 0xD2 /* Performs a Reed Solomon error correction on the received payload data stored in packet RAM. */
/* Battery Backup Memory (BBRAM) */
#define BBRAM_REG_INTERRUPT_MASK_0 0x100
#define BBRAM_REG_INTERRUPT_MASK_1 0x101
#define BBRAM_REG_NUMBER_OF_WAKEUPS_0 0x102
#define BBRAM_REG_NUMBER_OF_WAKEUPS_1 0x103
#define BBRAM_REG_NUMBER_OF_WAKEUPS_IRQ_THRESHOLD_0 0x104
#define BBRAM_REG_NUMBER_OF_WAKEUPS_IRQ_THRESHOLD_1 0x105
#define BBRAM_REG_RX_DWELL_TIME 0x106
#define BBRAM_REG_PARMTIME_DIVIDER 0x107
#define BBRAM_REG_SWM_RSSI_THRESH 0x108
#define BBRAM_REG_CHANNEL_FREQ_0 0x109
#define BBRAM_REG_CHANNEL_FREQ_1 0x10A
#define BBRAM_REG_CHANNEL_FREQ_2 0x10B
#define BBRAM_REG_RADIO_CFG_0 0x10C
#define BBRAM_REG_RADIO_CFG_1 0x10D
#define BBRAM_REG_RADIO_CFG_2 0x10E
#define BBRAM_REG_RADIO_CFG_3 0x10F
#define BBRAM_REG_RADIO_CFG_4 0x110
#define BBRAM_REG_RADIO_CFG_5 0x111
#define BBRAM_REG_RADIO_CFG_6 0x112
#define BBRAM_REG_RADIO_CFG_7 0x113
#define BBRAM_REG_RADIO_CFG_8 0x114
#define BBRAM_REG_RADIO_CFG_9 0x115
#define BBRAM_REG_RADIO_CFG_10 0x116
#define BBRAM_REG_RADIO_CFG_11 0x117
#define BBRAM_REG_IMAGE_REJECT_CAL_PHASE 0x118
#define BBRAM_REG_IMAGE_REJECT_CAL_AMPLITUDE 0x119
#define BBRAM_REG_MODE_CONTROL 0x11A
#define BBRAM_REG_PREAMBLE_MATCH 0x11B
#define BBRAM_REG_SYMBOL_MODE 0x11C
#define BBRAM_REG_PREAMBLE_LEN 0x11D
#define BBRAM_REG_CRC_POLY_0 0x11E
#define BBRAM_REG_CRC_POLY_1 0x11F
#define BBRAM_REG_SYNC_CONTROL 0x120
#define BBRAM_REG_SYNC_BYTE_0 0x121
#define BBRAM_REG_SYNC_BYTE_1 0x122
#define BBRAM_REG_SYNC_BYTE_2 0x123
#define BBRAM_REG_TX_BASE_ADR 0x124
#define BBRAM_REG_RX_BASE_ADR 0x125
#define BBRAM_REG_PACKET_LENGTH_CONTROL 0x126
#define BBRAM_REG_PACKET_LENGTH_MAX 0x127
#define BBRAM_REG_STATIC_REG_FIX 0x128
#define BBRAM_REG_ADDRESS_MATCH_OFFSET 0x129
#define BBRAM_REG_ADDRESS_LENGTH 0x12A
#define BBRAM_REG_ADDRESS_FILTERING_0 0x12B
#define BBRAM_REG_ADDRESS_FILTERING_1 0x12C
#define BBRAM_REG_ADDRESS_FILTERING_2 0x12D
#define BBRAM_REG_ADDRESS_FILTERING_3 0x12E
#define BBRAM_REG_ADDRESS_FILTERING_4 0x12F
#define BBRAM_REG_ADDRESS_FILTERING_5 0x130
#define BBRAM_REG_ADDRESS_FILTERING_6 0x131
#define BBRAM_REG_ADDRESS_FILTERING_7 0x132
#define BBRAM_REG_ADDRESS_FILTERING_8 0x133
#define BBRAM_REG_ADDRESS_FILTERING_9 0x134
#define BBRAM_REG_ADDRESS_FILTERING_10 0x135
#define BBRAM_REG_ADDRESS_FILTERING_11 0x136
#define BBRAM_REG_ADDRESS_FILTERING_12 0x137
#define BBRAM_REG_RSSI_WAIT_TIME 0x138
#define BBRAM_REG_TESTMODES 0x139
#define BBRAM_REG_TRANSITION_CLOCK_DIV 0x13A
#define BBRAM_REG_RESERVED_0 0x13B
#define BBRAM_REG_RESERVED_1 0x13C
#define BBRAM_REG_RESERVED_2 0x13D
#define BBRAM_REG_RX_SYNTH_LOCK_TIME 0x13E
#define BBRAM_REG_TX_SYNTH_LOCK_TIME 0x13F
/* BBRAM_REG_INTERRUPT_MASK_0 - 0x100 */
#define BBRAM_INTERRUPT_MASK_0_INTERRUPT_NUM_WAKEUPS (0x1 << 7)
#define BBRAM_INTERRUPT_MASK_0_INTERRUPT_SWM_RSSI_DET (0x1 << 6)
#define BBRAM_INTERRUPT_MASK_0_INTERRUPT_AES_DONE (0x1 << 5)
#define BBRAM_INTERRUPT_MASK_0_INTERRUPT_TX_EOF (0x1 << 4)
#define BBRAM_INTERRUPT_MASK_0_INTERRUPT_ADDRESS_MATCH (0x1 << 3)
#define BBRAM_INTERRUPT_MASK_0_INTERRUPT_CRC_CORRECT (0x1 << 2)
#define BBRAM_INTERRUPT_MASK_0_INTERRUPT_SYNC_DETECT (0x1 << 1)
#define BBRAM_INTERRUPT_MASK_0_INTERRUPT_PREMABLE_DETECT (0x1 << 0)
/* BBRAM_REG_INTERRUPT_MASK_1 - 0x101*/
#define BBRAM_INTERRUPT_MASK_1_BATTERY_ALARM (0x1 << 7)
#define BBRAM_INTERRUPT_MASK_1_CMD_READY (0x1 << 6)
#define BBRAM_INTERRUPT_MASK_1_WUC_TIMEOUT (0x1 << 4)
#define BBRAM_INTERRUPT_MASK_1_SPI_READY (0x1 << 1)
#define BBRAM_INTERRUPT_MASK_1_CMD_FINISHED (0x1 << 0)
/* BBRAM_REG_RADIO_CFG_0 - 0x10C */
#define BBRAM_RADIO_CFG_0_DATA_RATE_7_0(x) ((x & 0xFF) << 0)
/* BBRAM_REG_RADIO_CFG_1 - 0x10D */
#define BBRAM_RADIO_CFG_1_FREQ_DEVIATION_11_8(x) ((x & 0xF) << 4)
#define BBRAM_RADIO_CFG_1_DATA_RATE_11_8(x) ((x & 0xF) << 0)
/* BBRAM_REG_RADIO_CFG_2 - 0x10E */
#define BBRAM_RADIO_CFG_2_FREQ_DEVIATION_7_0(x) ((x & 0xFF) << 0)
/* BBRAM_REG_RADIO_CFG_6 - 0x112 */
#define BBRAM_RADIO_CFG_6_SYNTH_LUT_CONFIG_0(x) ((x & 0x3F) << 2)
#define BBRAM_RADIO_CFG_6_DISCRIM_PHASE(x) ((x & 0x3) << 0)
/* BBRAM_REG_RADIO_CFG_7 - 0x113 */
#define BBRAM_RADIO_CFG_7_AGC_LOCK_MODE(x) ((x & 0x3) << 6)
#define BBRAM_RADIO_CFG_7_SYNTH_LUT_CONTROL(x) ((x & 0x3) << 4)
#define BBRAM_RADIO_CFG_7_SYNTH_LUT_CONFIG_1(x) ((x & 0xF) << 0)
/* BBRAM_REG_RADIO_CFG_8 - 0x114 */
#define BBRAM_RADIO_CFG_8_PA_SINGLE_DIFF_SEL (0x1 << 7)
#define BBRAM_RADIO_CFG_8_PA_LEVEL(x) ((x & 0xF) << 3)
#define BBRAM_RADIO_CFG_8_PA_RAMP(x) ((x & 0x7) << 0)
/* BBRAM_REG_RADIO_CFG_9 - 0x115 */
#define BBRAM_RADIO_CFG_9_IFBW(x) ((x & 0x3) << 6)
#define BBRAM_RADIO_CFG_9_MOD_SCHEME(x) ((x & 0x7) << 3)
#define BBRAM_RADIO_CFG_9_DEMOD_SCHEME(x) ((x & 0x7) << 0)
/* BBRAM_REG_RADIO_CFG_10 - 0x116 */
#define BBRAM_RADIO_CFG_10_AFC_POLARITY (0x0 << 4)
#define BBRAM_RADIO_CFG_10_AFC_SCHEME(x) ((x & 0x3) << 2)
#define BBRAM_RADIO_CFG_10_AFC_LOCK_MODE(x) ((x & 0x3) << 0)
/* BBRAM_REG_RADIO_CFG_11 - 0x117 */
#define BBRAM_RADIO_CFG_11_AFC_KP(x) ((x & 0xF) << 4)
#define BBRAM_RADIO_CFG_11_AFC_KI(x) ((x & 0xF) << 0)
/* BBRAM_REG_MODE_CONTROL - 0x11A */
#define BBRAM_MODE_CONTROL_SWM_EN (0x1 << 7)
#define BBRAM_MODE_CONTROL_BB_CAL (0x1 << 6)
#define BBRAM_MODE_CONTROL_SWM_RSSI_QUAL (0x1 << 5)
#define BBRAM_MODE_CONTROL_TX_TO_RX_AUTO_TURNAROUND (0x1 << 4)
#define BBRAM_MODE_CONTROL_RX_TO_TX_AUTO_TURNAROUND (0x1 << 3)
#define BBRAM_MODE_CONTROL_CUSTOM_TRX_SYNTH_LOCK_TIME_EN (0x1 << 2)
#define BBRAM_MODE_CONTROL_EXT_LNA_EN (0x1 << 1)
#define BBRAM_MODE_CONTROL_EXT_PA_EN (0x1 << 0)
/* BBRAM_REG_SYMBOL_MODE - 0x11C */
#define BBRAM_SYMBOL_MODE_MANCHESTER_ENC (0x1 << 6)
#define BBRAM_SYMBOL_MODE_PROG_CRC_EN (0x1 << 5)
#define BBRAM_SYMBOL_MODE_EIGHT_TEN_ENC (0x1 << 4)
#define BBRAM_SYMBOL_MODE_DATA_WHITENING (0x1 << 3)
#define BBRAM_SYMBOL_MODE_SYMBOL_LENGTH(x) ((x & 0x7) << 0)
/* BBRAM_REG_SYNC_CONTROL - 0x120 */
#define BBRAM_SYNC_CONTROL_SYNC_ERROR_TOL(x) ((x & 0x3) << 6)
#define BBRAM_SYNC_CONTROL_SYNC_WORD_LENGTH(x) ((x & 0x1F) << 0)
/* BBRAM_REG_PACKET_LENGTH_CONTROL - 0x126 */
#define BBRAM_PACKET_LENGTH_CONTROL_DATA_BYTE (0x1 << 7)
#define BBRAM_PACKET_LENGTH_CONTROL_PACKET_LEN (0x1 << 6)
#define BBRAM_PACKET_LENGTH_CONTROL_CRC_EN (0x1 << 5)
#define BBRAM_PACKET_LENGTH_CONTROL_DATA_MODE(x) ((x & 0x3) << 3)
#define BBRAM_PACKET_LENGTH_CONTROL_LENGTH_OFFSET(x) ((x & 0x7) << 0)
/* BBRAM_REG_TESTMODES - 0x139 */
#define BBRAM_TESTMODES_EXT_PA_LNA_ATB_CONFIG (0x1 << 7)
#define BBRAM_TESTMODES_PER_IRQ_SELF_CLEAR (0x1 << 3)
#define BBRAM_TESTMODES_PER_ENABLE (0x1 << 2)
#define BBRAM_TESTMODES_CONTINUOUS_TX (0x1 << 1)
#define BBRAM_TESTMODES_CONTINUOUS_RX (0x1 << 0)
/* Modem Configuration Memory (MCR) */
#define MCR_REG_PA_LEVEL_MCR 0x307
#define MCR_REG_WUC_CONFIG_HIGH 0x30C
#define MCR_REG_WUC_CONFIG_LOW 0x30D
#define MCR_REG_WUC_VALUE_HIGH 0x30E
#define MCR_REG_WUC_VALUE_LOW 0x30F
#define MCR_REG_WUC_FLAG_RESET 0x310
#define MCR_REG_WUC_STATUS 0x311
#define MCR_REG_RSSI_READBACK 0x312
#define MCR_REG_MAX_AFC_RANGE 0x315
#define MCR_REG_IMAGE_REJECT_CAL_CONFIG 0x319
#define MCR_REG_CHIP_SHUTDOWN 0x322
#define MCR_REG_POWERDOWN_RX 0x324
#define MCR_REG_POWERDOWN_AUX 0x325
#define MCR_REG_ADC_READBACK_HIGH 0x327
#define MCR_REG_ADC_READBACK_LOW 0x328
#define MCR_REG_BATTERY_MONITOR_THRESHOLD_VOLTAGE 0x32D
#define MCR_REG_EXT_UC_CLK_DIVIDE 0x32E
#define MCR_REG_AGC_CLK_DIVIDE 0x32F
#define MCR_REG_INTERRUPT_SOURCE_0 0x336
#define MCR_REG_INTERRUPT_SOURCE_1 0x337
#define MCR_REG_CALIBRATION_CONTROL 0x338
#define MCR_REG_CALIBRATION_STATUS 0x339
#define MCR_REG_RXBB_CAL_CALWRD_READBACK 0x345
#define MCR_REG_RXBB_CAL_CALWRD_OVERWRITE 0x346
#define MCR_REG_RCOSC_CAL_READBACK_HIGH 0x34F
#define MCR_REG_RCOSC_CAL_READBACK_LOW 0x350
#define MCR_REG_ADC_CONFIG_LOW 0x359
#define MCR_REG_ADC_CONFIG_HIGH 0x35A
#define MCR_REG_AGC_OOK_CONTROL 0x35B
#define MCR_REG_AGC_CONFIG 0x35C
#define MCR_REG_AGC_MODE 0x35D
#define MCR_REG_AGC_LOW_THRESHOLD 0x35E
#define MCR_REG_AGC_HIGH_THRESHOLD 0x35F
#define MCR_REG_AGC_GAIN_STATUS 0x360
#define MCR_REG_AGC_ADC_WORD 0x361
#define MCR_REG_FREQUENCY_ERROR_READBACK 0x372
#define MCR_REG_VCO_BAND_OVRW_VAL 0x3CB
#define MCR_REG_VCO_AMPL_OVRW_VAL 0x3CC
#define MCR_REG_VCO_OVRW_EN 0x3CD
#define MCR_REG_VCO_CAL_CFG 0x3D0
#define MCR_REG_OSC_CONFIG 0x3D2
#define MCR_REG_VCO_BAND_READBACK 0x3DA
#define MCR_REG_VCO_AMPL_READBACK 0x3DB
#define MCR_REG_ANALOG_TEST_BUS 0x3F8
#define MCR_REG_RSSI_TSTMUX_SEL 0x3F9
#define MCR_REG_GPIO_CONFIGURE 0x3FA
#define MCR_REG_TEST_DAC_GAIN 0x3FD
struct ADF7023_BBRAM {
unsigned char interruptMask0; /* 0x100 */
unsigned char interruptMask1; /* 0x101 */
unsigned char numberOfWakeups0; /* 0x102 */
unsigned char numberOfWakeups1; /* 0x103 */
unsigned char numberOfWakeupsIrqThreshold0; /* 0x104 */
unsigned char numberOfWakeupsIrqThreshold1; /* 0x105 */
unsigned char rxDwellTime; /* 0x106 */
unsigned char parmtimeDivider; /* 0x107 */
unsigned char swmRssiThresh; /* 0x108 */
unsigned char channelFreq0; /* 0x109 */
unsigned char channelFreq1; /* 0x10A */
unsigned char channelFreq2; /* 0x10B */
unsigned char radioCfg0; /* 0x10C */
unsigned char radioCfg1; /* 0x10D */
unsigned char radioCfg2; /* 0x10E */
unsigned char radioCfg3; /* 0x10F */
unsigned char radioCfg4; /* 0x110 */
unsigned char radioCfg5; /* 0x111 */
unsigned char radioCfg6; /* 0x112 */
unsigned char radioCfg7; /* 0x113 */
unsigned char radioCfg8; /* 0x114 */
unsigned char radioCfg9; /* 0x115 */
unsigned char radioCfg10; /* 0x116 */
unsigned char radioCfg11; /* 0x117 */
unsigned char imageRejectCalPhase; /* 0x118 */
unsigned char imageRejectCalAmplitude; /* 0x119 */
unsigned char modeControl; /* 0x11A */
unsigned char preambleMatch; /* 0x11B */
unsigned char symbolMode; /* 0x11C */
unsigned char preambleLen; /* 0x11D */
unsigned char crcPoly0; /* 0x11E */
unsigned char crcPoly1; /* 0x11F */
unsigned char syncControl; /* 0x120 */
unsigned char syncByte0; /* 0x121 */
unsigned char syncByte1; /* 0x122 */
unsigned char syncByte2; /* 0x123 */
unsigned char txBaseAdr; /* 0x124 */
unsigned char rxBaseAdr; /* 0x125 */
unsigned char packetLengthControl; /* 0x126 */
unsigned char packetLengthMax; /* 0x127 */
unsigned char staticRegFix; /* 0x128 */
unsigned char addressMatchOffset; /* 0x129 */
unsigned char addressLength; /* 0x12A */
unsigned char addressFiltering0; /* 0x12B */
unsigned char addressFiltering1; /* 0x12C */
unsigned char addressFiltering2; /* 0x12D */
unsigned char addressFiltering3; /* 0x12E */
unsigned char addressFiltering4; /* 0x12F */
unsigned char addressFiltering5; /* 0x130 */
unsigned char addressFiltering6; /* 0x131 */
unsigned char addressFiltering7; /* 0x132 */
unsigned char addressFiltering8; /* 0x133 */
unsigned char addressFiltering9; /* 0x134 */
unsigned char addressFiltering10; /* 0x135 */
unsigned char addressFiltering11; /* 0x136 */
unsigned char addressFiltering12; /* 0x137 */
unsigned char rssiWaitTime; /* 0x138 */
unsigned char testmodes; /* 0x139 */
unsigned char transitionClockDiv; /* 0x13A */
unsigned char reserved0; /* 0x13B */
unsigned char reserved1; /* 0x13C */
unsigned char reserved2; /* 0x13D */
unsigned char rxSynthLockTime; /* 0x13E */
unsigned char txSynthLockTime; /* 0x13F */
};
#define ADF7023_RAM_SIZE 256
#define ADF7023_TX_BASE_ADR 0x10
#define ADF7023_RX_BASE_ADR ((ADF7023_TX_BASE_ADR + ADF7023_RAM_SIZE) / 2)
/******************************************************************************/
/************************ Functions Declarations ******************************/
/******************************************************************************/
/* Initializes the ADF7023. */
char ADF7023_Init(void);
/* Reads the status word of the ADF7023. */
void ADF7023_GetStatus(unsigned char *status);
/* Initiates a command. */
void ADF7023_SetCommand(unsigned char command);
/* Sets a FW state and waits until the device enters in that state. */
void ADF7023_SetFwState(unsigned char fwState);
/* Reads data from the RAM. */
void ADF7023_GetRAM(unsigned long address,
unsigned long length,
unsigned char *data);
/* Writes data to RAM. */
void ADF7023_SetRAM(unsigned long address,
unsigned long length,
unsigned char *data);
void ADF7023_SetRAM_And_Verify(unsigned long address, unsigned long length, unsigned char *data);
/* Indicates if an incoming packet is available. */
unsigned char ADF7023_ReceivePacketAvailable(void);
/* Receives one packet. */
void ADF7023_ReceivePacket(unsigned char *packet, unsigned char *payload_length);
/* Transmits one packet. */
void ADF7023_TransmitPacket(unsigned char *packet, unsigned char length);
/* Sets the channel frequency. */
void ADF7023_SetChannelFrequency(unsigned long chFreq);
/* Sets the data rate. */
void ADF7023_SetDataRate(unsigned long dataRate);
/* Sets the frequency deviation. */
void ADF7023_SetFrequencyDeviation(unsigned long freqDev);
#endif /* __ADF7023_H__ */