37 lines
1.3 KiB
Markdown
37 lines
1.3 KiB
Markdown
# GPIO HAL Example
|
|
This example demonstrates and tests the functionality of the GPIO HAL. You can
|
|
use it to:
|
|
|
|
* Understand the logic of the GPIO HAL.
|
|
* Test your implementation of arch-specific GPIO HAL components if you are
|
|
developing a new port.
|
|
|
|
This example assumes a device with:
|
|
|
|
* 3 output pins (e.g. LEDs).
|
|
* 1 button.
|
|
|
|
# Supported devices
|
|
This example is expected to work off-the-shelf on the following boards:
|
|
|
|
* All CC13xx/CC26xx devices
|
|
* All CC2538 devices
|
|
|
|
# Extending for other platforms
|
|
Create a sub-directory with the same name as your platform. For example, for
|
|
platform `my-new-platform` create a subdirectory called `my-new-platform`.
|
|
Source files in this directory will be compiled automatically. In the most
|
|
simple case, all you will need is a source file called e.g. `pins.c` (it's OK
|
|
to use a different filename). In this file, you will need to provide
|
|
definitions of the variables used by the example to manipulate pins. These
|
|
variables are:
|
|
|
|
* `out_pin1`, `out_pin2` and `out_pin3` for output pins.
|
|
* `btn_pin` for the button pin.
|
|
|
|
Assign to those variables a value that corresponds to the output pin in your
|
|
board that you wish to test with the example. For example, if you have a LED
|
|
connected to pin 20, then you will need to
|
|
|
|
gpio_hal_pin_t out_pin1 = 20;
|