nes-proj/cpu/cc253x/dev/cc2530-rf.c

819 lines
22 KiB
C
Raw Normal View History

/*
* Copyright (c) 2011, George Oikonomou - <oikonomou@users.sourceforge.net>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the Contiki operating system.
*/
/**
* \file
* Implementation of the cc2530 RF driver
*
* \author
* George Oikonomou - <oikonomou@users.sourceforge.net>
*/
#include "contiki.h"
#include "dev/radio.h"
#include "dev/cc2530-rf.h"
#include "cc253x.h"
#include "sfr-bits.h"
#include "sys/clock.h"
#include "sys/rtimer.h"
#include "net/packetbuf.h"
#include "net/rime/rimestats.h"
#include "net/linkaddr.h"
#include "net/netstack.h"
#include <string.h>
/*---------------------------------------------------------------------------*/
#define CHECKSUM_LEN 2
/*---------------------------------------------------------------------------*/
#if CC2530_RF_CONF_LEDS
#define CC2530_RF_LEDS CC2530_RF_CONF_LEDS
#else
#define CC2530_RF_LEDS 0
#endif
#if CC2530_RF_LEDS
#include "dev/leds.h"
#define RF_RX_LED_ON() leds_on(LEDS_RED);
#define RF_RX_LED_OFF() leds_off(LEDS_RED);
#define RF_TX_LED_ON() leds_on(LEDS_GREEN);
#define RF_TX_LED_OFF() leds_off(LEDS_GREEN);
#else
#define RF_RX_LED_ON()
2012-12-16 13:10:28 +00:00
#define RF_RX_LED_OFF()
#define RF_TX_LED_ON()
2012-12-16 13:10:28 +00:00
#define RF_TX_LED_OFF()
#endif
/*---------------------------------------------------------------------------*/
#define DEBUG 0
#if DEBUG
#include "debug.h"
#define PUTSTRING(...) putstring(__VA_ARGS__)
#define PUTHEX(...) puthex(__VA_ARGS__)
#else
#define PUTSTRING(...)
#define PUTHEX(...)
#endif
/*---------------------------------------------------------------------------*/
/* Local RF Flags */
#define RX_ACTIVE 0x80
#define WAS_OFF 0x10
#define RF_ON 0x01
/* Bit Masks for the last byte in the RX FIFO */
#define CRC_BIT_MASK 0x80
#define LQI_BIT_MASK 0x7F
2012-06-20 10:23:52 +00:00
/* RSSI Offset */
#define RSSI_OFFSET 73
/* 192 ms, radio off -> on interval */
#define ONOFF_TIME RTIMER_ARCH_SECOND / 3125
#define CC2530_RF_CHANNEL_SET_ERROR -1
#define CC2530_RF_TX_POWER_TXCTRL_MIN_VAL 0x09 /* Value for min TX Power */
#define CC2530_RF_TX_POWER_TXCTRL_DEF_VAL 0x69 /* Reset Value */
/*---------------------------------------------------------------------------*/
#if CC2530_RF_CONF_HEXDUMP
#include "dev/io-arch.h"
static const uint8_t magic[] = { 0x53, 0x6E, 0x69, 0x66 }; /* Snif */
#endif
/*---------------------------------------------------------------------------*/
#ifdef CC2530_RF_CONF_AUTOACK
#define CC2530_RF_AUTOACK CC2530_RF_CONF_AUTOACK
#else
#define CC2530_RF_AUTOACK 1
#endif
/*---------------------------------------------------------------------------*/
static uint8_t CC_AT_DATA rf_flags;
static int on(void); /* prepare() needs our prototype */
static int off(void); /* transmit() needs our prototype */
static int channel_clear(void); /* transmit() needs our prototype */
/*---------------------------------------------------------------------------*/
/* TX Power dBm lookup table. Values from SmartRF Studio v1.16.0 */
typedef struct output_config {
radio_value_t power;
uint8_t txpower_val;
} output_config_t;
static const output_config_t output_power[] = {
{ 5, 0xF5 }, /* 4.5 */
{ 3, 0xE5 }, /* 2.5 */
{ 1, 0xD5 },
{ 0, 0xC5 }, /* -0.5 */
{ -1, 0xB5 }, /* -1.5 */
{ -3, 0xA5 },
{ -4, 0x95 },
{ -6, 0x85 },
{ -8, 0x75 },
{-10, 0x65 },
{-12, 0x55 },
{-14, 0x45 },
{-16, 0x35 },
{-18, 0x25 },
{-20, 0x15 },
{-22, 0x05 },
{-28, 0x05 }, /* TXCTRL must be set to 0x09 */
};
#define OUTPUT_CONFIG_COUNT (sizeof(output_power) / sizeof(output_config_t))
/* Max and Min Output Power in dBm */
#define OUTPUT_POWER_MIN (output_power[OUTPUT_CONFIG_COUNT - 1].power)
#define OUTPUT_POWER_MAX (output_power[0].power)
/*---------------------------------------------------------------------------*/
/**
* \brief Get the current operating channel
* \return Returns a value in [11,26] representing the current channel
*/
static uint8_t
get_channel()
{
return (uint8_t)((FREQCTRL + 44) / 5);
}
/*---------------------------------------------------------------------------*/
/**
* \brief Set the current operating channel
* \param channel The desired channel as a value in [11,26]
* \return Returns a value in [11,26] representing the current channel
* or a negative value if \e channel was out of bounds
*/
static int8_t
set_channel(uint8_t channel)
{
PUTSTRING("RF: Set Chan\n");
if((channel < CC2530_RF_CHANNEL_MIN) || (channel > CC2530_RF_CHANNEL_MAX)) {
return CC2530_RF_CHANNEL_SET_ERROR;
}
/* Changes to FREQCTRL take effect after the next recalibration */
/* Changes to FREQCTRL take effect after the next recalibration */
off();
FREQCTRL = (CC2530_RF_CHANNEL_MIN
+ (channel - CC2530_RF_CHANNEL_MIN) * CC2530_RF_CHANNEL_SPACING);
on();
return (int8_t)channel;
}
/*---------------------------------------------------------------------------*/
static radio_value_t
get_pan_id(void)
{
return (radio_value_t)(PAN_ID1 << 8 | PAN_ID0);
}
/*---------------------------------------------------------------------------*/
static void
set_pan_id(uint16_t pan)
{
PAN_ID0 = pan & 0xFF;
PAN_ID1 = pan >> 8;
}
/*---------------------------------------------------------------------------*/
static radio_value_t
get_short_addr(void)
{
return (radio_value_t)(SHORT_ADDR1 << 8 | SHORT_ADDR0);
}
/*---------------------------------------------------------------------------*/
static void
set_short_addr(uint16_t addr)
{
SHORT_ADDR0 = addr & 0xFF;
SHORT_ADDR1 = addr >> 8;
}
/*---------------------------------------------------------------------------*/
/**
* \brief Reads the current signal strength (RSSI)
* \return The current RSSI in dBm
*
* This function reads the current RSSI on the currently configured
* channel.
*/
static radio_value_t
get_rssi(void)
{
int8_t rssi;
/* If we are off, turn on first */
if(RXENABLE == 0) {
rf_flags |= WAS_OFF;
on();
}
/* Wait on RSSI_VALID */
while((RSSISTAT & RSSISTAT_RSSI_VALID) == 0);
rssi = (radio_value_t)RSSI - RSSI_OFFSET;
/* If we were off, turn back off */
if((rf_flags & WAS_OFF) == WAS_OFF) {
rf_flags &= ~WAS_OFF;
off();
}
return rssi;
}
/*---------------------------------------------------------------------------*/
/* Returns the current CCA threshold in dBm */
static radio_value_t
get_cca_threshold(void)
{
return (int8_t)CCACTRL0 - RSSI_OFFSET;
}
/*---------------------------------------------------------------------------*/
/* Sets the CCA threshold in dBm */
static void
set_cca_threshold(radio_value_t value)
{
CCACTRL0 = (value + RSSI_OFFSET) & 0xFF;
}
/*---------------------------------------------------------------------------*/
/* Returns the current TX power in dBm */
static radio_value_t
get_tx_power(void)
{
int i;
uint8_t reg_val = TXPOWER;
if(TXCTRL == CC2530_RF_TX_POWER_TXCTRL_MIN_VAL) {
return OUTPUT_POWER_MIN;
}
/*
* Find the TXPOWER value in the lookup table
* If the value has been written with set_tx_power, we should be able to
* find the exact value. However, in case the register has been written in
* a different fashion, we return the immediately lower value of the lookup
*/
for(i = 0; i < OUTPUT_CONFIG_COUNT; i++) {
if(reg_val >= output_power[i].txpower_val) {
return output_power[i].power;
}
}
return OUTPUT_POWER_MIN;
}
/*---------------------------------------------------------------------------*/
/*
* Set TX power to 'at least' power dBm
* This works with a lookup table. If the value of 'power' does not exist in
* the lookup table, TXPOWER will be set to the immediately higher available
* value
*/
static void
set_tx_power(radio_value_t power)
{
int i;
if(power <= output_power[OUTPUT_CONFIG_COUNT - 1].power) {
TXCTRL = CC2530_RF_TX_POWER_TXCTRL_MIN_VAL;
TXPOWER = output_power[OUTPUT_CONFIG_COUNT - 1].txpower_val;
return;
}
for(i = OUTPUT_CONFIG_COUNT - 2; i >= 0; --i) {
if(power <= output_power[i].power) {
/* Perhaps an earlier call set TXCTRL to 0x09. Restore */
TXCTRL = CC2530_RF_TX_POWER_TXCTRL_DEF_VAL;
TXPOWER = output_power[i].txpower_val;
return;
}
}
}
/*---------------------------------------------------------------------------*/
static void
set_frame_filtering(uint8_t enable)
{
if(enable) {
FRMFILT0 |= FRMFILT0_FRAME_FILTER_EN;
} else {
FRMFILT0 &= ~FRMFILT0_FRAME_FILTER_EN;
}
}
/*---------------------------------------------------------------------------*/
static void
set_auto_ack(uint8_t enable)
{
if(enable) {
FRMCTRL0 |= FRMCTRL0_AUTOACK;
} else {
FRMCTRL0 &= ~FRMCTRL0_AUTOACK;
}
}
/*---------------------------------------------------------------------------*/
/* Netstack API radio driver functions */
/*---------------------------------------------------------------------------*/
static int
init(void)
{
PUTSTRING("RF: Init\n");
if(rf_flags & RF_ON) {
return 0;
}
#if CC2530_RF_LOW_POWER_RX
/* Reduce RX power consumption current to 20mA at the cost of sensitivity */
RXCTRL = 0x00;
FSCTRL = 0x50;
#else
RXCTRL = 0x3F;
FSCTRL = 0x55;
#endif /* CC2530_RF_LOW_POWER_RX */
CCACTRL0 = CC2530_RF_CCA_THRES;
/*
* According to the user guide, these registers must be updated from their
* defaults for optimal performance
*
* Table 23-6, Sec. 23.15.1, p. 259
*/
TXFILTCFG = 0x09; /* TX anti-aliasing filter */
AGCCTRL1 = 0x15; /* AGC target value */
FSCAL1 = 0x00; /* Reduce the VCO leakage */
/* Auto ACKs and CRC calculation, default RX and TX modes with FIFOs */
FRMCTRL0 = FRMCTRL0_AUTOCRC;
#if CC2530_RF_AUTOACK
FRMCTRL0 |= FRMCTRL0_AUTOACK;
#endif
/* Disable source address matching and autopend */
SRCMATCH = 0; /* investigate */
/* MAX FIFOP threshold */
FIFOPCTRL = CC2530_RF_MAX_PACKET_LEN;
TXPOWER = CC2530_RF_TX_POWER;
RF_TX_LED_OFF();
RF_RX_LED_OFF();
rf_flags |= RF_ON;
return 1;
}
/*---------------------------------------------------------------------------*/
static int
prepare(const void *payload, unsigned short payload_len)
{
uint8_t i;
PUTSTRING("RF: Prepare 0x");
PUTHEX(payload_len + CHECKSUM_LEN);
PUTSTRING(" bytes\n");
/*
* When we transmit in very quick bursts, make sure previous transmission
* is not still in progress before re-writing to the TX FIFO
*/
while(FSMSTAT1 & FSMSTAT1_TX_ACTIVE);
if((rf_flags & RX_ACTIVE) == 0) {
on();
}
CC2530_CSP_ISFLUSHTX();
PUTSTRING("RF: data = ");
/* Send the phy length byte first */
RFD = payload_len + CHECKSUM_LEN; /* Payload plus FCS */
for(i = 0; i < payload_len; i++) {
2012-12-16 13:10:28 +00:00
RFD = ((unsigned char *)(payload))[i];
PUTHEX(((unsigned char *)(payload))[i]);
}
PUTSTRING("\n");
/* Leave space for the FCS */
RFD = 0;
RFD = 0;
return 0;
}
/*---------------------------------------------------------------------------*/
static int
transmit(unsigned short transmit_len)
{
uint8_t counter;
int ret = RADIO_TX_ERR;
rtimer_clock_t t0;
transmit_len; /* hush the warning */
if(!(rf_flags & RX_ACTIVE)) {
t0 = RTIMER_NOW();
on();
rf_flags |= WAS_OFF;
2012-12-16 13:10:28 +00:00
while(RTIMER_CLOCK_LT(RTIMER_NOW(), t0 + ONOFF_TIME));
}
if(channel_clear() == CC2530_RF_CCA_BUSY) {
RIMESTATS_ADD(contentiondrop);
return RADIO_TX_COLLISION;
}
/*
* prepare() double checked that TX_ACTIVE is low. If SFD is high we are
* receiving. Abort transmission and bail out with RADIO_TX_COLLISION
*/
if(FSMSTAT1 & FSMSTAT1_SFD) {
RIMESTATS_ADD(contentiondrop);
return RADIO_TX_COLLISION;
}
/* Start the transmission */
RF_TX_LED_ON();
ENERGEST_OFF(ENERGEST_TYPE_LISTEN);
ENERGEST_ON(ENERGEST_TYPE_TRANSMIT);
CC2530_CSP_ISTXON();
counter = 0;
while(!(FSMSTAT1 & FSMSTAT1_TX_ACTIVE) && (counter++ < 3)) {
clock_delay_usec(6);
}
if(!(FSMSTAT1 & FSMSTAT1_TX_ACTIVE)) {
PUTSTRING("RF: TX never active.\n");
CC2530_CSP_ISFLUSHTX();
ret = RADIO_TX_ERR;
} else {
/* Wait for the transmission to finish */
while(FSMSTAT1 & FSMSTAT1_TX_ACTIVE);
ret = RADIO_TX_OK;
}
ENERGEST_OFF(ENERGEST_TYPE_TRANSMIT);
ENERGEST_ON(ENERGEST_TYPE_LISTEN);
2012-12-16 13:10:28 +00:00
if(rf_flags & WAS_OFF) {
off();
}
RIMESTATS_ADD(lltx);
RF_TX_LED_OFF();
/* OK, sent. We are now ready to send more */
return ret;
}
/*---------------------------------------------------------------------------*/
static int
send(const void *payload, unsigned short payload_len)
{
prepare(payload, payload_len);
return transmit(payload_len);
}
/*---------------------------------------------------------------------------*/
static int
read(void *buf, unsigned short bufsize)
{
uint8_t i;
uint8_t len;
uint8_t crc_corr;
int8_t rssi;
PUTSTRING("RF: Read\n");
/* Check the length */
len = RFD;
/* Check for validity */
if(len > CC2530_RF_MAX_PACKET_LEN) {
/* Oops, we must be out of sync. */
PUTSTRING("RF: bad sync\n");
RIMESTATS_ADD(badsynch);
CC2530_CSP_ISFLUSHRX();
return 0;
}
if(len <= CC2530_RF_MIN_PACKET_LEN) {
PUTSTRING("RF: too short\n");
RIMESTATS_ADD(tooshort);
CC2530_CSP_ISFLUSHRX();
return 0;
}
if(len - CHECKSUM_LEN > bufsize) {
PUTSTRING("RF: too long\n");
RIMESTATS_ADD(toolong);
CC2530_CSP_ISFLUSHRX();
return 0;
}
#if CC2530_RF_CONF_HEXDUMP
/* If we reach here, chances are the FIFO is holding a valid frame */
io_arch_writeb(magic[0]);
io_arch_writeb(magic[1]);
io_arch_writeb(magic[2]);
io_arch_writeb(magic[3]);
io_arch_writeb(len);
#endif
RF_RX_LED_ON();
PUTSTRING("RF: read (0x");
PUTHEX(len);
PUTSTRING(" bytes) = ");
len -= CHECKSUM_LEN;
for(i = 0; i < len; ++i) {
2012-12-16 13:10:28 +00:00
((unsigned char *)(buf))[i] = RFD;
#if CC2530_RF_CONF_HEXDUMP
2012-12-16 13:10:28 +00:00
io_arch_writeb(((unsigned char *)(buf))[i]);
#endif
2012-12-16 13:10:28 +00:00
PUTHEX(((unsigned char *)(buf))[i]);
}
PUTSTRING("\n");
/* Read the RSSI and CRC/Corr bytes */
2012-06-20 10:23:52 +00:00
rssi = ((int8_t) RFD) - RSSI_OFFSET;
crc_corr = RFD;
#if CC2530_RF_CONF_HEXDUMP
io_arch_writeb(rssi);
io_arch_writeb(crc_corr);
io_arch_flush();
#endif
/* MS bit CRC OK/Not OK, 7 LS Bits, Correlation value */
if(crc_corr & CRC_BIT_MASK) {
packetbuf_set_attr(PACKETBUF_ATTR_RSSI, rssi);
packetbuf_set_attr(PACKETBUF_ATTR_LINK_QUALITY, crc_corr & LQI_BIT_MASK);
RIMESTATS_ADD(llrx);
} else {
RIMESTATS_ADD(badcrc);
CC2530_CSP_ISFLUSHRX();
RF_RX_LED_OFF();
return 0;
}
/* If FIFOP==1 and FIFO==0 then we had a FIFO overflow at some point. */
if((FSMSTAT1 & (FSMSTAT1_FIFO | FSMSTAT1_FIFOP)) == FSMSTAT1_FIFOP) {
/*
* If we reach here means that there might be more intact packets in the
* FIFO despite the overflow. This can happen with bursts of small packets.
*
* Only flush if the FIFO is actually empty. If not, then next pass we will
* pick up one more packet or flush due to an error.
*/
if(!RXFIFOCNT) {
CC2530_CSP_ISFLUSHRX();
}
}
RF_RX_LED_OFF();
return (len);
}
/*---------------------------------------------------------------------------*/
static int
channel_clear(void)
{
if(FSMSTAT1 & FSMSTAT1_CCA) {
return CC2530_RF_CCA_CLEAR;
}
return CC2530_RF_CCA_BUSY;
}
/*---------------------------------------------------------------------------*/
static int
receiving_packet(void)
{
PUTSTRING("RF: Receiving\n");
/*
* SFD high while transmitting and receiving.
* TX_ACTIVE high only when transmitting
*
* FSMSTAT1 & (TX_ACTIVE | SFD) == SFD <=> receiving
*/
return (FSMSTAT1 & (FSMSTAT1_TX_ACTIVE | FSMSTAT1_SFD) == FSMSTAT1_SFD);
}
/*---------------------------------------------------------------------------*/
static int
pending_packet(void)
{
return (FSMSTAT1 & FSMSTAT1_FIFOP);
}
/*---------------------------------------------------------------------------*/
static int
on(void)
{
if(!(rf_flags & RX_ACTIVE)) {
CC2530_CSP_ISFLUSHRX();
CC2530_CSP_ISRXON();
rf_flags |= RX_ACTIVE;
}
ENERGEST_ON(ENERGEST_TYPE_LISTEN);
return 1;
}
/*---------------------------------------------------------------------------*/
static int
off(void)
{
CC2530_CSP_ISRFOFF();
CC2530_CSP_ISFLUSHRX();
2012-04-30 16:21:23 +00:00
rf_flags &= ~RX_ACTIVE;
ENERGEST_OFF(ENERGEST_TYPE_LISTEN);
return 1;
}
/*---------------------------------------------------------------------------*/
static radio_result_t
get_value(radio_param_t param, radio_value_t *value)
{
if(!value) {
return RADIO_RESULT_INVALID_VALUE;
}
switch(param) {
case RADIO_PARAM_POWER_MODE:
*value = RXENABLE == 0 ? RADIO_POWER_MODE_OFF : RADIO_POWER_MODE_ON;
return RADIO_RESULT_OK;
case RADIO_PARAM_CHANNEL:
*value = (radio_value_t)get_channel();
return RADIO_RESULT_OK;
case RADIO_PARAM_PAN_ID:
*value = get_pan_id();
return RADIO_RESULT_OK;
case RADIO_PARAM_16BIT_ADDR:
*value = get_short_addr();
return RADIO_RESULT_OK;
case RADIO_PARAM_RX_MODE:
*value = 0;
if(FRMFILT0 & FRMFILT0_FRAME_FILTER_EN) {
*value |= RADIO_RX_MODE_ADDRESS_FILTER;
}
if(FRMCTRL0 & FRMCTRL0_AUTOACK) {
*value |= RADIO_RX_MODE_AUTOACK;
}
return RADIO_RESULT_OK;
case RADIO_PARAM_TXPOWER:
*value = get_tx_power();
return RADIO_RESULT_OK;
case RADIO_PARAM_CCA_THRESHOLD:
*value = get_cca_threshold();
return RADIO_RESULT_OK;
case RADIO_PARAM_RSSI:
*value = get_rssi();
return RADIO_RESULT_OK;
case RADIO_CONST_CHANNEL_MIN:
*value = CC2530_RF_CHANNEL_MIN;
return RADIO_RESULT_OK;
case RADIO_CONST_CHANNEL_MAX:
*value = CC2530_RF_CHANNEL_MAX;
return RADIO_RESULT_OK;
case RADIO_CONST_TXPOWER_MIN:
*value = OUTPUT_POWER_MIN;
return RADIO_RESULT_OK;
case RADIO_CONST_TXPOWER_MAX:
*value = OUTPUT_POWER_MAX;
return RADIO_RESULT_OK;
default:
return RADIO_RESULT_NOT_SUPPORTED;
}
}
/*---------------------------------------------------------------------------*/
static radio_result_t
set_value(radio_param_t param, radio_value_t value)
{
switch(param) {
case RADIO_PARAM_POWER_MODE:
if(value == RADIO_POWER_MODE_ON) {
on();
return RADIO_RESULT_OK;
}
if(value == RADIO_POWER_MODE_OFF) {
off();
return RADIO_RESULT_OK;
}
return RADIO_RESULT_INVALID_VALUE;
case RADIO_PARAM_CHANNEL:
if(value < CC2530_RF_CHANNEL_MIN || value > CC2530_RF_CHANNEL_MAX) {
return RADIO_RESULT_INVALID_VALUE;
}
if(set_channel(value) == CC2530_RF_CHANNEL_SET_ERROR) {
return RADIO_RESULT_ERROR;
}
return RADIO_RESULT_OK;
case RADIO_PARAM_PAN_ID:
set_pan_id(value & 0xffff);
return RADIO_RESULT_OK;
case RADIO_PARAM_16BIT_ADDR:
set_short_addr(value & 0xffff);
return RADIO_RESULT_OK;
case RADIO_PARAM_RX_MODE:
if(value & ~(RADIO_RX_MODE_ADDRESS_FILTER |
RADIO_RX_MODE_AUTOACK)) {
return RADIO_RESULT_INVALID_VALUE;
}
set_frame_filtering((value & RADIO_RX_MODE_ADDRESS_FILTER) != 0);
set_auto_ack((value & RADIO_RX_MODE_AUTOACK) != 0);
return RADIO_RESULT_OK;
case RADIO_PARAM_TXPOWER:
if(value < OUTPUT_POWER_MIN || value > OUTPUT_POWER_MAX) {
return RADIO_RESULT_INVALID_VALUE;
}
set_tx_power(value);
return RADIO_RESULT_OK;
case RADIO_PARAM_CCA_THRESHOLD:
set_cca_threshold(value);
return RADIO_RESULT_OK;
default:
return RADIO_RESULT_NOT_SUPPORTED;
}
}
/*---------------------------------------------------------------------------*/
static radio_result_t
get_object(radio_param_t param, void *dest, size_t size)
{
uint8_t *target;
int i;
if(param == RADIO_PARAM_64BIT_ADDR) {
if(size != 8 || !dest) {
return RADIO_RESULT_INVALID_VALUE;
}
target = dest;
for(i = 0; i < 8; i++) {
target[i] = ((uint8_t *)&EXT_ADDR0)[7 - i] & 0xFF;
}
return RADIO_RESULT_OK;
}
return RADIO_RESULT_NOT_SUPPORTED;
}
/*---------------------------------------------------------------------------*/
static radio_result_t
set_object(radio_param_t param, const void *src, size_t size)
{
int i;
if(param == RADIO_PARAM_64BIT_ADDR) {
if(size != 8 || !src) {
return RADIO_RESULT_INVALID_VALUE;
}
for(i = 0; i < 8; i++) {
((uint8_t *)&EXT_ADDR0)[i] = ((uint8_t *)src)[7 - i];
}
return RADIO_RESULT_OK;
}
return RADIO_RESULT_NOT_SUPPORTED;
}
/*---------------------------------------------------------------------------*/
2012-12-16 13:10:28 +00:00
const struct radio_driver cc2530_rf_driver = {
init,
prepare,
transmit,
send,
read,
channel_clear,
receiving_packet,
pending_packet,
on,
off,
get_value,
set_value,
get_object,
set_object
};
/*---------------------------------------------------------------------------*/