nes-proj/cpu/cc2430/dev/cc2430_rf.c

/**
 * \file
 *         CC2430 RF driver
 * \author
 *         Zach Shelby <zach@sensinode.com>
 *
 *  bankable code for cc2430 rf driver.  this code can be placed in any bank.
 *
 */

#include <stdio.h>

#include "contiki.h"
#include "dev/radio.h"
#include "dev/cc2430_rf.h"
#include "cc2430_sfr.h"
#include "sys/clock.h"

#include "net/packetbuf.h"
#include "net/rime/rimestats.h"

extern void (* receiver_callback)(const struct radio_driver *);
#ifndef RF_DEFAULT_POWER
#define RF_DEFAULT_POWER 100
#endif

#ifndef RF_DEFAULT_CHANNEL
#define RF_DEFAULT_CHANNEL 18
#endif

#ifndef CC2430_CONF_CHECKSUM
#define CC2430_CONF_CHECKSUM 0
#endif /* CC2420_CONF_CHECKSUM */

#if CC2430_CONF_CHECKSUM
#include "lib/crc16.h"
#define CHECKSUM_LEN 2
#else
#define CHECKSUM_LEN 2
#endif /* CC2430_CONF_CHECKSUM */
#if DEBUG_LEDS
/* moved leds code to BANK1 to make space for cc2430_rf_process in HOME */
/* can't call code in BANK1 from alternate banks unless it is marked with __banked */
#include "dev/leds.h"
#define RF_RX_LED_ON()		leds_on(LEDS_RED);
#define RF_RX_LED_OFF()		leds_off(LEDS_RED);
#define RF_TX_LED_ON()		leds_on(LEDS_GREEN);
#define RF_TX_LED_OFF()		leds_off(LEDS_GREEN);
#else
#define RF_RX_LED_ON()		
#define RF_RX_LED_OFF()		
#define RF_TX_LED_ON()		
#define RF_TX_LED_OFF()		
#endif
#define DEBUG 0
#if DEBUG
#define PRINTF(...) printf(__VA_ARGS__)
#else
#define PRINTF(...) do {} while (0)
#endif

#define RX_ACTIVE 0x80
#define TX_ACK 0x40
#define TX_ON_AIR 0x20
#define RX_NO_DMA

#ifdef HAVE_RF_ERROR
uint8_t rf_error = 0;
#endif

uint8_t rf_initialized = 0;
uint8_t rf_tx_power;
uint8_t rf_flags;
uint8_t rf_channel = 0;
rf_address_mode_t rf_addr_mode;
uint16_t rf_manfid;
uint8_t rf_softack;
uint16_t rf_panid;

/*---------------------------------------------------------------------------*/
PROCESS_NAME(cc2430_rf_process);
/*---------------------------------------------------------------------------*/

const struct radio_driver cc2430_rf_driver =
  {
    cc2430_rf_send,
    cc2430_rf_read,
    cc2430_rf_set_receiver,
    cc2430_rf_on,
    cc2430_rf_off,
  };

/*---------------------------------------------------------------------------*/
void
cc2430_rf_init(void) __banked
{
  if(rf_initialized) {
    return;
  }

  PRINTF("cc2430_rf_init called\n");

  RFPWR &= ~RREG_RADIO_PD;	/*make sure it's powered*/
  while((RFPWR & ADI_RADIO_PD) == 1);
  while((RFIF & IRQ_RREG_ON) == 0);	/*wait for power up*/
  SLEEP &= ~OSC_PD; /*Osc on*/
  while((SLEEP & XOSC_STB) == 0);	/*wait for power up*/

  rf_flags = 0;
  rf_softack = 0;

  FSMTC1 = 1;	/*don't abort reception, if enable called, accept ack, auto rx after tx*/

  MDMCTRL0H = 0x02;	 /* Generic client, standard hysteresis, decoder on 0x0a */
  MDMCTRL0L = 0xE2;	 /* automatic ACK and CRC, standard CCA and preamble 0xf2 */

  MDMCTRL1H = 0x30;			/* Defaults */
  MDMCTRL1L = 0x0;

  RXCTRL0H = 0x32;			/* RX tuning optimized */
  RXCTRL0L = 0xf5;

  /* get ID for MAC */
  rf_manfid = CHVER;
  rf_manfid <<= 8;
  rf_manfid += CHIPID;
  cc2430_rf_channel_set(RF_DEFAULT_CHANNEL);
  cc2430_rf_command(ISFLUSHTX);
  cc2430_rf_command(ISFLUSHRX);

  cc2430_rf_set_addr(0xffff, 0x0000, NULL);
  cc2430_rf_address_decoder_mode(RF_DECODER_NONE);

  RFIM = IRQ_FIFOP;
  RFIF &= ~(IRQ_FIFOP);

  S1CON &= ~(RFIF_0 | RFIF_1);
  IEN2 |= RFIE;

  RF_TX_LED_OFF();
  RF_RX_LED_OFF();
  rf_initialized = 1;
  process_start(&cc2430_rf_process, NULL);
}
/*---------------------------------------------------------------------------*/
int
cc2430_rf_send_b(void *payload, unsigned short payload_len) __banked
{
  uint8_t i, counter;
  
  if(rf_flags & TX_ACK) {
    return -1;
  }
  if((rf_flags & RX_ACTIVE) == 0) {
    cc2430_rf_rx_enable();
  }
  /* Check packet attributes */
  /*printf("packetbuf_attr: txpower = %d\n", packetbuf_attr(PACKETBUF_ATTR_RADIO_TXPOWER));*/
  /* Should set TX power according to this if > 0 */

  PRINTF("cc2430_rf: sending %ud byte payload\n", payload_len);

  RIMESTATS_ADD(lltx);

  cc2430_rf_command(ISFLUSHTX);
  PRINTF("cc2430_rf: sent = ");
  /* Send the phy length byte first */
  RFD = payload_len+CHECKSUM_LEN; 	/* Payload plus FCS */
  PRINTF("(%d)", payload_len+CHECKSUM_LEN);
  for(i = 0 ; i < payload_len; i++) {
    RFD = ((unsigned char*)(payload))[i];
    PRINTF("%02X", ((unsigned char*)(payload))[i]);
  }
  PRINTF("\n");

  /* Leave space for the FCS */
  RFD = 0;
  RFD = 0;

  if(cc2430_rf_cca_check(0,0) == -1) {
    return -1;
  }

  /* Start the transmission */

  RFIF &= ~IRQ_TXDONE;
  cc2430_rf_command(ISTXON);
  counter = 0;
  while(!(RFSTATUS & TX_ACTIVE) && (counter++ < 3)) {
    clock_delay(10);
  }

  if(!(RFSTATUS & TX_ACTIVE)) {
    PRINTF("cc2430_rf: TX never active.\n");
    cc2430_rf_command(ISFLUSHTX);
    return -1;
  } else {
    RF_RX_LED_OFF();
    RF_TX_LED_ON();
    // rf_flags |= TX_ON_AIR;
  }
  return 1;
}
/*---------------------------------------------------------------------------*/
int
cc2430_rf_read_banked(void *buf, unsigned short bufsize) __banked
{
  uint8_t i, len;
#if CC2420_CONF_CHECKSUM
  uint16_t checksum;
#endif /* CC2420_CONF_CHECKSUM */

  /* RX interrupt polled the cc2430_rf_process, now read the RX FIFO */

  /* Check the length */
  len = RFD;

  /* Check for validity */
  if(len > CC2430_MAX_PACKET_LEN) {
    /* Oops, we must be out of sync. */
	PRINTF("error: bad sync\n");
    cc2430_rf_command(ISFLUSHRX);
    RIMESTATS_ADD(badsynch);
    return 0;
  }

  if(len <= CC2430_MIN_PACKET_LEN) {
	PRINTF("error: too short\n");
    cc2430_rf_command(ISFLUSHRX);
    RIMESTATS_ADD(tooshort);
    return 0;
  }

  if(len - CHECKSUM_LEN > bufsize) {
	PRINTF("error: too long\n");
    cc2430_rf_command(ISFLUSHRX);
    RIMESTATS_ADD(toolong);
    return 0;
  }

  /* Read the buffer */
  PRINTF("cc2430_rf: read = ");
  PRINTF("(%d)", len);
  for(i = 0; i < (len - CHECKSUM_LEN); i++) {
      ((unsigned char*)(buf))[i] = RFD;
      PRINTF("%02X", ((unsigned char*)(buf))[i]);
  }
  PRINTF("\n");

#if CC2430_CONF_CHECKSUM
    /* Deal with the checksum */
    checksum = RFD * 256;
    checksum += RFD;
#endif /* CC2430_CONF_CHECKSUM */
  packetbuf_set_attr(PACKETBUF_ATTR_RSSI, ((int8_t) RFD) - 45);
  packetbuf_set_attr(PACKETBUF_ATTR_LINK_QUALITY, RFD);

  RFIF &= ~IRQ_FIFOP;
  RFSTATUS &= ~FIFO;
  cc2430_rf_command(ISFLUSHRX);
  cc2430_rf_command(ISFLUSHRX);
  RF_RX_LED_OFF();

  RIMESTATS_ADD(llrx);

  return (len - CHECKSUM_LEN);
}
/**
 * Execute a single CSP command.
 *
 * \param command command to execute
 *
 */
void cc2430_rf_command(uint8_t command) __banked
{
  if(command >= 0xE0) {	/*immediate strobe*/
    uint8_t fifo_count;
    switch(command) {	/*hardware bug workaround*/
    case ISRFOFF:
    case ISRXON:
    case ISTXON:
      fifo_count = RXFIFOCNT;
      RFST = command;
      clock_delay(2);
      if(fifo_count != RXFIFOCNT) {
	RFST = ISFLUSHRX;
	RFST = ISFLUSHRX;
      }
      break;

    default:
      RFST = command;
    }
  } else if(command == SSTART) {
    RFIF &= ~IRQ_CSP_STOP;	/*clear IRQ flag*/
    RFST = SSTOP;	/*make sure there is a stop in the end*/
    RFST = ISSTART;	/*start execution*/
    while((RFIF & IRQ_CSP_STOP) == 0);
  } else {
    RFST = command;	/*write command*/
  }
}
/*---------------------------------------------------------------------------*/
/*---------------------------------------------------------------------------*/

/**
 * Select RF channel.
 *
 * \param channel channel number to select
 *
 * \return channel value or negative (invalid channel number)
 */

 /* channel freqdiv = (2048 + FSCTRL(9:0)) / 4
            freq = (2048 + FSCTRL(9:0)) MHz */

int8_t
cc2430_rf_channel_set(uint8_t channel)
{
  uint16_t freq;

  if((channel < 11) || (channel > 26)) {
    return -1;
  }

  cc2430_rf_command(ISSTOP);	/*make sure CSP is not running*/
  cc2430_rf_command(ISRFOFF);
  /* Channel values: 11-26 */
  freq = (uint16_t) channel - 11;
  freq *= 5;	/*channel spacing*/
  freq += 357; /*correct channel range*/
  freq |= 0x4000; /*LOCK_THR = 1*/
  FSCTRLH = (freq >> 8);
  FSCTRLL = (uint8_t)freq;

  cc2430_rf_command(ISRXON);

  rf_channel = channel;

  return (int8_t) channel;
}
/*---------------------------------------------------------------------------*/
/*PA_LEVEL TXCTRL register Output Power [dBm] Current Consumption [mA]
	31 0xA0FF 0 17.4
	27 0xA0FB -1 16.5
	23 0xA0F7 -3 15.2
	19 0xA0F3 -5 13.9
	15 0xA0EF -7 12.5
	11 0xA0EB -10 11.2
	 7 0xA0E7 -15 9.9
	 3 0xA0E3 -25 8.5*/

/**
 * Select RF transmit power.
 *
 * \param new_power new power level (in per cent)
 *
 * \return new level or negative (value out of range)
 */

int8_t
cc2430_rf_power_set(uint8_t new_power)
{
  uint16_t power;

  if(new_power > 100) {
    return -1;
  }

  power = 31 * new_power;
  power /= 100;
  power += 0xA160;

  /* Set transmitter power */
  TXCTRLH = (power >> 8);
  TXCTRLL = (uint8_t)power;

  rf_tx_power = (int8_t) new_power;
  return rf_tx_power;
}
/*---------------------------------------------------------------------------*/
/**
 * Enable RF receiver.
 *
 *
 * \return pdTRUE
 * \return pdFALSE	bus not free
 */
int8_t
cc2430_rf_rx_enable(void) __banked
{
  PRINTF("cc2430_rf_rx_enable called\n");
  if(!(rf_flags & RX_ACTIVE)) {
    IOCFG0 = 0x7f;   // Set the FIFOP threshold 127
    RSSIH = 0xd2; /* -84dbm = 0xd2 default, 0xe0 -70 dbm */
    rf_flags |= RX_ACTIVE;

    RFPWR &= ~RREG_RADIO_PD;	/*make sure it's powered*/
    while((RFIF & IRQ_RREG_ON) == 0);	/*wait for power up*/
    SLEEP &= ~OSC_PD; /*Osc on*/
    while((SLEEP & XOSC_STB) == 0);	/*wait for power up*/

    cc2430_rf_command(ISRXON);
    cc2430_rf_command(ISFLUSHRX);
  }
  PRINTF("cc2430_rf_rx_enable done\n");
  return 1;
}
/*---------------------------------------------------------------------------*/
/**
 * Disable RF receiver.
 *
 *
 * \return pdTRUE
 * \return pdFALSE	bus not free
 */
int8_t cc2430_rf_rx_disable(void) __banked
{
  cc2430_rf_command(ISSTOP);	/*make sure CSP is not running*/
  cc2430_rf_command(ISRFOFF);

  RFPWR |= RREG_RADIO_PD;		/*RF powerdown*/

  rf_flags = 0;
  return 1;
}
/*---------------------------------------------------------------------------*/
/**
 * Enable RF transmitter.
 *
 *
 * \return pdTRUE
 * \return pdFALSE	bus not free
 */
int8_t
cc2430_rf_tx_enable(void)
{
  DMAARM = 0x80 + (1 << 0);	/*ABORT + channel bit*/

  return 1;
}

/**
	* Set MAC addresses
	*
	*	\param pan The PAN address to set
	*	\param adde The short address to set
	*	\param ieee_addr The 64-bit IEEE address to set
	*/
void
cc2430_rf_set_addr(unsigned pan, unsigned addr, const uint8_t *ieee_addr)
{
	uint8_t f;
	__xdata unsigned char *ptr;

	rf_panid = pan;
	PANIDH = pan >> 8;
	PANIDL = pan & 0xff;

	SHORTADDRH = addr >> 8;
	SHORTADDRL = addr & 0xff;

	if(ieee_addr != NULL) {
		ptr = &IEEE_ADDR0;
	    /* LSB first, MSB last for 802.15.4 addresses in CC2420 */
		for (f = 0; f < 8; f++) {
			*ptr++ = ieee_addr[f];
		}
	}
}

/*---------------------------------------------------------------------------*/
/**
 * Set address decoder on/off.
 *
 * \param param 1=on 0=off.
 * \return pdTRUE operation successful
 */
int8_t
cc2430_rf_address_decoder_mode(rf_address_mode_t mode)
{
  int8_t retval = -1;

  rf_softack = 0;
  /* set oscillator on*/
  switch(mode) {
  case RF_SOFTACK_MONITOR:
    rf_softack = 1;
  case RF_MONITOR:
    MDMCTRL0H |= 0x10;	 /*Address-decode off , coordinator*/
    MDMCTRL0L &= ~0x10;	 /*no automatic ACK */
    break;

  case RF_DECODER_COORDINATOR:
    MDMCTRL0H |= 0x18;	 /*Address-decode on , coordinator*/
    MDMCTRL0L |= 0x10;	 /*automatic ACK */
    break;

  case RF_DECODER_ON:
    MDMCTRL0H |= 0x08;	 /*Address-decode on */
    MDMCTRL0L &= ~0x10;	 /* no automatic ACK */
    break;

  default:
    MDMCTRL0H &= ~0x18;	 /* Generic client */
    MDMCTRL0L &= ~0x10;	 /* no automatic ACK */
    break;
  }
  rf_addr_mode = mode;

  retval = 1;
  return retval;
}
/*---------------------------------------------------------------------------*/
/**
 * Channel energy detect.
 *
 * Coordinator use this function detect best channel for PAN-network.
 * \return RSSI-energy level dBm.
 * \return 0	operation failed.
 */

int8_t
cc2430_rf_analyze_rssi(void)
{
  int8_t retval = -128;
  /*pause_us(128);*/

  retval = (int8_t)RSSIL;
  retval -= 45;
  return retval;
}
/*---------------------------------------------------------------------------*/
/**
 * Clear channel assesment check.
 *
 * \return pdTRUE	CCA clear
 * \return pdFALSE	CCA reserved
 */
int8_t
cc2430_rf_cca_check(uint8_t backoff_count, uint8_t slotted)
{
  uint8_t counter, cca = 1;
  int8_t retval = 1;
  backoff_count;
  cc2430_rf_command(ISRXON);

  clock_delay(64);
  switch(slotted) {
  case 1:

    if(RFSTATUS & CCA) {
      counter = 0;
      cca = 1;
      while(cca != 0) {
	if(counter > 1) {
	  cca = 0;
	}
	clock_delay(256);
	if(!(RFSTATUS & CCA)) {
	  cca = 0;
	  retval = -1;
	}
	counter++;
      }
    } else {
      retval = -1;
    }
    break;

  case 0:
    if(!(RFSTATUS & CCA)) {
      retval = -1;
    } else {

    }
    break;
  }
  return retval;
}
/*---------------------------------------------------------------------------*/
/**
 * Send ACK.
 *
 *\param pending set up pending flag if pending > 0.
 */
void
cc2430_rf_send_ack(uint8_t pending) __banked
{
  if(pending) {
    cc2430_rf_command(ISACKPEND);
  } else {
    cc2430_rf_command(ISACK);
  }
}
/*---------------------------------------------------------------------------*/