nes-proj/arch/cpu/cc2538/Makefile.cc2538

ifndef SOURCE_LDSCRIPT
SOURCE_LDSCRIPT = $(CONTIKI_CPU)/cc2538.lds
endif
LDSCRIPT = $(OBJECTDIR)/cc2538.ld

CFLAGS += -DCMSIS_DEV_HDR=\"cc2538_cm3.h\"

### If the user-specified a Node ID, pass a define
ifdef NODEID
  CFLAGS += -DIEEE_ADDR_NODE_ID=$(NODEID)
endif

### CPU-dependent directories
CONTIKI_CPU_DIRS = . dev usb usb/common usb/common/cdc-acm

### CPU-dependent source files
CONTIKI_CPU_SOURCEFILES += soc.c clock.c rtimer-arch.c uart.c watchdog.c
CONTIKI_CPU_SOURCEFILES += nvic.c sys-ctrl.c gpio.c ioc.c spi-legacy.c adc.c
CONTIKI_CPU_SOURCEFILES += spi-arch.c
CONTIKI_CPU_SOURCEFILES += crypto.c aes.c ecb.c cbc.c ctr.c cbc-mac.c gcm.c
CONTIKI_CPU_SOURCEFILES += ccm.c sha256.c gpio-hal-arch.c
CONTIKI_CPU_SOURCEFILES += cc2538-aes-128.c cc2538-ccm-star.c
CONTIKI_CPU_SOURCEFILES += cc2538-rf.c udma.c lpm.c int-master.c
CONTIKI_CPU_SOURCEFILES += pka.c bignum-driver.c ecc-driver.c ecc-algorithm.c
CONTIKI_CPU_SOURCEFILES += ecc-curve.c
CONTIKI_CPU_SOURCEFILES += dbg.c ieee-addr.c
CONTIKI_CPU_SOURCEFILES += slip-arch.c slip.c
CONTIKI_CPU_SOURCEFILES += i2c.c cc2538-temp-sensor.c vdd3-sensor.c
CONTIKI_CPU_SOURCEFILES += cfs-coffee.c cfs-coffee-arch.c pwm.c

USB_SOURCEFILES += usb-core.c cdc-acm.c usb-arch.c usb-serial.c cdc-acm-descriptors.c

CPU_START_SOURCEFILES = startup-gcc.c

CONTIKI_SOURCEFILES += $(CONTIKI_CPU_SOURCEFILES) $(USB_SOURCEFILES)

### Always re-build ieee-addr.o in case the command line passes a new NODEID
FORCE:

$(OBJECTDIR)/ieee-addr.o: ieee-addr.c FORCE | $(OBJECTDIR)
	$(TRACE_CC)
	$(Q)$(CC) $(CFLAGS) -c $< -o $@

### This rule is used to generate the correct linker script
LDGENFLAGS += $(CFLAGS)
LDGENFLAGS += -imacros "contiki-conf.h" -imacros "dev/cc2538-dev.h"
LDGENFLAGS += -imacros "dev/flash.h" -imacros "cfs-coffee-arch.h"
LDGENFLAGS += -x c -P -E

# NB: Assumes LDSCRIPT was not overridden and is in $(OBJECTDIR)
$(LDSCRIPT): $(SOURCE_LDSCRIPT) FORCE | $(OBJECTDIR)
	$(TRACE_CC)
	$(Q)$(CC) $(LDGENFLAGS) $< | grep -v '^\s*#\s*pragma\>' > $@

include $(CONTIKI)/arch/cpu/arm/cortex-m/cm3/Makefile.cm3
cc2538: Make it possible to use a custom linker script Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> 2013-10-29 13:14:35 +00:00			`ifndef SOURCE_LDSCRIPT`
			`SOURCE_LDSCRIPT = $(CONTIKI_CPU)/cc2538.lds`
			`endif`
New Platform: TI CC2538 Development Kit This commit adds cpu, platform and example files, providing support for running Contiki on TI's cc2538 DK 2013-01-12 22:44:42 +00:00			`LDSCRIPT = $(OBJECTDIR)/cc2538.ld`

Use the CM3 common Makefile to build CC2538-based platforms 2017-11-26 21:15:05 +00:00			`CFLAGS += -DCMSIS_DEV_HDR=\"cc2538_cm3.h\"`
New Platform: TI CC2538 Development Kit This commit adds cpu, platform and example files, providing support for running Contiki on TI's cc2538 DK 2013-01-12 22:44:42 +00:00
			`### If the user-specified a Node ID, pass a define`
			`ifdef NODEID`
			`CFLAGS += -DIEEE_ADDR_NODE_ID=$(NODEID)`
			`endif`

			`### CPU-dependent directories`
Use the CM3 common Makefile to build CC2538-based platforms 2017-11-26 21:15:05 +00:00			`CONTIKI_CPU_DIRS = . dev usb usb/common usb/common/cdc-acm`
New Platform: TI CC2538 Development Kit This commit adds cpu, platform and example files, providing support for running Contiki on TI's cc2538 DK 2013-01-12 22:44:42 +00:00
			`### CPU-dependent source files`
cc2538: Provide SoC information Add functions providing the SoC revision, SRAM size, and enabled hardware features, as well as a function printing SoC information. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com> 2016-06-11 21:15:22 +00:00			`CONTIKI_CPU_SOURCEFILES += soc.c clock.c rtimer-arch.c uart.c watchdog.c`
Rename old CC2538 SPI driver 2018-03-02 19:27:17 +00:00			`CONTIKI_CPU_SOURCEFILES += nvic.c sys-ctrl.c gpio.c ioc.c spi-legacy.c adc.c`
Rename arch-specific SPI HAL implementations 2018-03-02 19:58:20 +00:00			`CONTIKI_CPU_SOURCEFILES += spi-arch.c`
cc2538: Add crypto driver and example for AES-GCM Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com> 2016-01-02 03:20:16 +00:00			`CONTIKI_CPU_SOURCEFILES += crypto.c aes.c ecb.c cbc.c ctr.c cbc-mac.c gcm.c`
Build the GPIO HAL for the CC2538 2017-12-17 03:21:13 +00:00			`CONTIKI_CPU_SOURCEFILES += ccm.c sha256.c gpio-hal-arch.c`
cc2538: Add AES-CCM* driver Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com> 2015-12-25 23:42:39 +00:00			`CONTIKI_CPU_SOURCEFILES += cc2538-aes-128.c cc2538-ccm-star.c`
Implement master interrupt manipulation (CC2538) 2017-11-22 22:51:25 +00:00			`CONTIKI_CPU_SOURCEFILES += cc2538-rf.c udma.c lpm.c int-master.c`
cc2538: Add PKA drivers, ECC algorithms and examples 2015-10-18 18:14:17 +00:00			`CONTIKI_CPU_SOURCEFILES += pka.c bignum-driver.c ecc-driver.c ecc-algorithm.c`
			`CONTIKI_CPU_SOURCEFILES += ecc-curve.c`
New Platform: TI CC2538 Development Kit This commit adds cpu, platform and example files, providing support for running Contiki on TI's cc2538 DK 2013-01-12 22:44:42 +00:00			`CONTIKI_CPU_SOURCEFILES += dbg.c ieee-addr.c`
			`CONTIKI_CPU_SOURCEFILES += slip-arch.c slip.c`
Include CC2538 sensors in the build 2015-02-11 16:54:56 +00:00			`CONTIKI_CPU_SOURCEFILES += i2c.c cc2538-temp-sensor.c vdd3-sensor.c`
Added PWM driver for the Zolertia Zoul module and CC2538 platforms 2015-11-25 22:44:54 +00:00			`CONTIKI_CPU_SOURCEFILES += cfs-coffee.c cfs-coffee-arch.c pwm.c`
New Platform: TI CC2538 Development Kit This commit adds cpu, platform and example files, providing support for running Contiki on TI's cc2538 DK 2013-01-12 22:44:42 +00:00
Build CC2538 USB functionality from within our own CPU dir 2017-10-08 22:47:11 +00:00			`USB_SOURCEFILES += usb-core.c cdc-acm.c usb-arch.c usb-serial.c cdc-acm-descriptors.c`
New Platform: TI CC2538 Development Kit This commit adds cpu, platform and example files, providing support for running Contiki on TI's cc2538 DK 2013-01-12 22:44:42 +00:00
Use the CM3 common Makefile to build CC2538-based platforms 2017-11-26 21:15:05 +00:00			`CPU_START_SOURCEFILES = startup-gcc.c`
Move cc2538 startup-gcc.c to the CPU dir 2015-02-09 15:23:36 +00:00
Build dbg-io as a module 2018-03-24 21:25:04 +00:00			`CONTIKI_SOURCEFILES += $(CONTIKI_CPU_SOURCEFILES) $(USB_SOURCEFILES)`
New Platform: TI CC2538 Development Kit This commit adds cpu, platform and example files, providing support for running Contiki on TI's cc2538 DK 2013-01-12 22:44:42 +00:00
			`### Always re-build ieee-addr.o in case the command line passes a new NODEID`
			`FORCE:`

Makefile.include: support make clean all Historically $(OBJECTDIR) was created when Makefile.include is read. A consequence is that combining "clean" with "all" (or any other build target) results in an error because the clean removes the object directory that is required to exist when building dependencies. Creating $(OBJECTDIR) on-demand ensures it is present when needed. Removed creation of $(OBJECTDIR) on initial read, and added an order-only dependency forcing its creation all Makefile* rules where the target is explicitly or implicitly in $(OBJECTDIR). 2013-06-20 22:45:41 +00:00			`$(OBJECTDIR)/ieee-addr.o: ieee-addr.c FORCE \| $(OBJECTDIR)`
Add support for verbosity control 2013-08-06 15:46:57 +00:00			`$(TRACE_CC)`
			`$(Q)$(CC) $(CFLAGS) -c $< -o $@`
New Platform: TI CC2538 Development Kit This commit adds cpu, platform and example files, providing support for running Contiki on TI's cc2538 DK 2013-01-12 22:44:42 +00:00
			`### This rule is used to generate the correct linker script`
cc2538: Fix possible linker script breakage The conditional definitions in project-conf.h depending on CONTIKI_TARGET_<TARGET_NAME> were ignored at link time, which broke the linker script if it used these definitions, so the flashed applications could crash or malfunction. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com> 2016-05-29 21:05:17 +00:00			`LDGENFLAGS += $(CFLAGS)`
cc2538: Define and use device features Define the available CC2538 devices and their features, and use them to define the linker script memory regions. The .nrdata output section is now always defined in order to trigger an error if it is used but no memory is available for it. The CC2538 device used by Contiki is made a configuration option, the CC2538SF53 device being the default. This makes more sense than defining the flash memory address and size as configuration options like previously, all the more not all values are possible and all the features are linked by each device. This change also makes it possible to: - use the correct SRAM parameters for the CC2538NF11, - know at build time if the AES, SHA, ECC and RSA hardware features are available on the selected CC2538 device. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com> 2015-06-18 20:31:53 +00:00			`LDGENFLAGS += -imacros "contiki-conf.h" -imacros "dev/cc2538-dev.h"`
cc2538: Add support for Coffee Coffee is placed by default at the beginning of the flash memory, right before the firmware. This avoids the memory gaps that there could be before and after Coffee if it were placed after the firmware, because it is unlikely that the end of the firmware is aligned with a flash page boundary, and the CCA is not flash-page-aligned. Thanks to that, Coffee is also always in the same flash area if its size remains unchanged, even if the firmware changes, which makes it possible to keep the Coffee files when reprogramming the firmware after a partial flash erase command. The default configuration of Coffee is set to use sensible values for a typical usage on this SoC, i.e. for sensor data logging. The default size of Coffee is set to 0 in order not to waste flash if Coffee is unused. COFFEE_CONF_CUSTOM_PORT can be defined to a header file to be used with "#include" in order to override the default CC2538 port of Coffee. This makes it possible to use Coffee with an external memory device rather than with the internal flash memory, without having to alter the Contiki files. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com> 2015-07-12 19:48:18 +00:00			`LDGENFLAGS += -imacros "dev/flash.h" -imacros "cfs-coffee-arch.h"`
Add support for verbosity control 2013-08-06 15:46:57 +00:00			`LDGENFLAGS += -x c -P -E`
New Platform: TI CC2538 Development Kit This commit adds cpu, platform and example files, providing support for running Contiki on TI's cc2538 DK 2013-01-12 22:44:42 +00:00
Makefile.include: support make clean all Historically $(OBJECTDIR) was created when Makefile.include is read. A consequence is that combining "clean" with "all" (or any other build target) results in an error because the clean removes the object directory that is required to exist when building dependencies. Creating $(OBJECTDIR) on-demand ensures it is present when needed. Removed creation of $(OBJECTDIR) on initial read, and added an order-only dependency forcing its creation all Makefile* rules where the target is explicitly or implicitly in $(OBJECTDIR). 2013-06-20 22:45:41 +00:00			`# NB: Assumes LDSCRIPT was not overridden and is in $(OBJECTDIR)`
cc2538: Make it possible to use a custom linker script Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> 2013-10-29 13:14:35 +00:00			`$(LDSCRIPT): $(SOURCE_LDSCRIPT) FORCE \| $(OBJECTDIR)`
Add support for verbosity control 2013-08-06 15:46:57 +00:00			`$(TRACE_CC)`
CC2538: Use CMSIS-CORE Switch to CMSIS-CORE and remove the duplicate code. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com> 2016-07-23 21:39:56 +00:00			`$(Q)$(CC) $(LDGENFLAGS) $< \| grep -v '^\s#\spragma\>' > $@`
Use the CM3 common Makefile to build CC2538-based platforms 2017-11-26 21:15:05 +00:00
			`include $(CONTIKI)/arch/cpu/arm/cortex-m/cm3/Makefile.cm3`