nes-proj/platform/zoul/dev/rtcc.h

381 lines
12 KiB
C
Raw Normal View History

/*
* Copyright (c) 2015, Zolertia <http://www.zolertia.com>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the Contiki operating system.
*
*/
/* -------------------------------------------------------------------------- */
/**
* \addtogroup remote
* @{
*
* \defgroup remote-rtcc RE-Mote Real Time Clock Calendar
*
* Driver for the RE-Mote on-board ultra-low power RTCC (Real Time Clock
* Calendar)
* @{
*
* \file
* Header file for the RE-Mote RF antenna switch
*/
/* -------------------------------------------------------------------------- */
#ifndef RTCC_H_
#define RTCC_H_
/* -------------------------------------------------------------------------- */
#include <stdio.h>
#include "i2c.h"
/* -------------------------------------------------------------------------- */
/**
* \name Callback function to handle the RTCC alarm interrupt and macro
* @{
*/
#define RTCC_REGISTER_INT1(ptr) rtcc_int1_callback = ptr;
extern void (*rtcc_int1_callback)(uint8_t value);
/** @} */
/* -------------------------------------------------------------------------- */
/** \name AB08XX Address registers
* @{
*/
/* -------------------------------------------------------------------------- */
/* Time/date registers (no offset) */
#define CENTHS_ADDR 0x00
#define SEC_ADDR 0x01
#define MIN_ADDR 0x02
#define HOUR_ADDR 0x03
#define DAY_ADDR 0x04
#define MONTHS_ADDR 0x05
#define YEAR_ADDR 0x06
#define WEEKDAYLS_ADDR 0x07
/* Alarm registers */
#define ALARM_MAP_OFFSET 0x08
#define HUNDREDTHS_ALARM_ADDR 0x00
#define SECONDS_ALARM_ADDR 0x01
#define MINUTES_ALARM_ADDR 0x02
#define HOURS_ALARM_ADDR 0x03
#define DAY_ALARMS_ADDR 0x04
#define MONTHS_ALARM_ADDR 0x05
#define WEEKDAYS_ALARM_ADDR 0x06
/* Configuration registers */
#define CONFIG_MAP_OFFSET 0x0F
#define STATUS_ADDR 0x00
#define CTRL_1_ADDR 0x01
#define CTRL_2_ADDR 0x02
#define INT_MASK_ADDR 0x03
#define SQW_ADDR 0x04
#define CAL_XT_ADDR 0x05
#define CAL_RC_HI_ADDR 0x06
#define CAL_RC_LO_ADDR 0x07
#define INT_POL_ADDR 0x08
#define TIMER_CONTROL_ADDR 0x09
#define TIMER_COUNTDOWN_ADDR 0x0A
#define TIMER_INITIAL_ADDR 0x0B
#define WDT_ADDR 0x0C
#define OSC_CONTROL_ADDR 0x0D
#define OSC_STATUS_ADDR 0x0E
#define CONF_KEY_ADDR 0x10
#define TRICKLE_ADDR 0x11
#define BREF_CTRL_ADDR 0x12
#define AF_CTRL_ADDR 0x17
#define BAT_MODE_IO_ADDR 0x18
#define ASTAT_ADDR 0x20
#define OCTRL_ADDR 0x21
#define EXT_ADDR 0x30
/* 256b. The upper 2 bits are taken from XADS field */
#define RAM_1_ADDR (CONFIG_MAP_OFFSET + 0x31)
/* 256b. The upper 2 bits are taken from XADA field */
#define RAM_2_ADDR (CONFIG_MAP_OFFSET + 0x71)
/** @} */
/* -------------------------------------------------------------------------- */
/** \name RTCC Bitmasks and shifts
* @{
*/
#define STATUS_CB 0x80
#define STATUS_BAT 0x40
#define STATUS_WDT 0x20
#define STATUS_BL 0x10
#define STATUS_TIM 0x08
#define STATUS_ALM 0x04
#define STATUS_EX2 0x02
#define STATUS_EX1 0x01
#define CTRL1_WRTC 0x01
#define CTRL1_ARST 0x04
#define CTRL1_OUT 0x10
#define CTRL1_OUTB 0x20
#define CTRL1_1224 0x40
#define CTRL1_STOP 0x80
/* Defines the nIRQ pin control */
#define CTRL2_OUT1S_NIRQ_OUT 0x00
#define CTRL2_OUT1S_NIRQ_SQW_OUT 0x01
#define CTRL2_OUT1S_NIRQ_SQW_NIRQ 0x02
#define CTRL2_OUT1S_NIRQ_NAIRQ_OUT 0x03
/* Defines the nIRQ2 pin control */
#define CTRL2_OUT2S_SQW_OUT 0x04
#define CTRL2_OUT2S_NAIRQ_OUTB 0x0C
#define CTRL2_OUT2S_TIRQ_OUTB 0x10
#define CTRL2_OUT2S_NTIRQ_OUTB 0x14
#define CTRL2_OUT2S_OUTB 0x1C
/* Interrupt Mask */
#define INTMASK_EX1E 0x01
#define INTMASK_EX2E 0x02
#define INTMASK_AIE 0x04
#define INTMASK_TIE 0x08
#define INTMASK_BLIE 0x10
#define INTMASK_IM_HIGH 0x20
#define INTMASK_IM_MED 0x40
#define INTMASK_IM_LOW 0x60
#define INTMASK_CEB 0x80
/* Timer countdown control */
#define COUNTDOWN_TIMER_TE 0x80
#define COUNTDOWN_TIMER_TM 0x40
#define COUNTDOWN_TIMER_TRPT 0x20
#define COUNTDOWN_TIMER_RPT_SECOND 0x1C
#define COUNTDOWN_TIMER_RPT_MINUTE 0x18
#define COUNTDOWN_TIMER_RPT_HOUR 0x24
#define COUNTDOWN_TIMER_RPT_DAY 0x10
#define COUNTDOWN_TIMER_RPT_WEEK 0x0C
#define COUNTDOWN_TIMER_RPT_MONTH 0x08
#define COUNTDOWN_TIMER_RPT_YEAR 0x04
#define COUNTDOWN_TIMER_RPT_SHIFT 0x02
#define COUNTDOWN_TIMER_TFS_ONE 0x01
#define COUNTDOWN_TIMER_TFS_TWO 0x02
#define COUNTDOWN_TIMER_TFS_THREE 0x03
/* Oscillator control */
#define OSCONTROL_ACIE 0x01
#define OSCONTROL_OFIE 0x02
#define OSCONTROL_FOS 0x08
#define OSCONTROL_AOS 0x10
#define OSCONTROL_ACAL_NO_CAL 0x00
#define OSCONTROL_ACAL_17_MIN 0x40
#define OSCONTROL_ACAL_9_MIN 0x60
#define OSCONTROL_OSEL 0x80
/** @} */
/* -------------------------------------------------------------------------- */
/** \name RTCC operational values
* @{
*/
/* I2C address (7-bits) */
#define AB08XX_ADDR 0x69
#define INT_BUFF_SIZE 20L
#define TCS_DIODE_3K (TCS_ENABLE + 0x05)
#define TCS_DIODE_6K (TCS_ENABLE + 0x06)
#define TCS_DIODE_11K (TCS_ENABLE + 0x07)
#define RTCC_TOGGLE_PM_BIT 0x20
#define RTCC_FIX_10THS_HUNDRETHS 0xF0
#define RTCC_FIX_100THS_HUNDRETHS 0xFF
#define RTCC_TD_MAP_SIZE (WEEKDAYLS_ADDR + 1)
#define RTCC_ALARM_MAP_SIZE (WEEKDAYS_ALARM_ADDR + 1)
#define RTCC_CONFIG_MAP_SIZE (BREF_CTRL_ADDR + 1)
/** @} */
/* -------------------------------------------------------------------------- */
/** \name RTCC error values
* @{
*/
#define AB08_ERROR (-1)
#define AB08_SUCCESS 0x00
/** @} */
/* -------------------------------------------------------------------------- */
/** \name RTCC enumeration and options
* @{
*/
enum {
RTCC_PRINT_DATE = 0,
RTCC_PRINT_CONFIG,
RTCC_PRINT_ALARM,
RTCC_PRINT_ALARM_DEC,
RTCC_PRINT_DATE_DEC,
RTCC_PRINT_MAX,
};
/* -------------------------------------------------------------------------- */
enum {
RTCC_ALARM_OFF = 0,
RTCC_ALARM_ON,
RTCC_ALARM_MAX,
};
/* -------------------------------------------------------------------------- */
enum {
RTCC_CMD_UNLOCK = 0,
RTCC_CMD_LOCK,
RTCC_CMD_ENABLE,
RTCC_CMD_STOP,
RTCC_CMD_MAX,
};
/* -------------------------------------------------------------------------- */
enum {
RTCC_24H_MODE = 0,
RTCC_12H_MODE_AM,
RTCC_12H_MODE_PM,
};
/* -------------------------------------------------------------------------- */
enum {
RTCC_CENTURY_19XX_21XX = 1,
RTCC_CENTURY_20XX,
};
/* -------------------------------------------------------------------------- */
enum {
RTCC_REPEAT_NONE = 0,
RTCC_REPEAT_YEAR,
RTCC_REPEAT_MONTH,
RTCC_REPEAT_WEEK,
RTCC_REPEAT_DAY,
RTCC_REPEAT_HOUR,
RTCC_REPEAT_MINUTE,
RTCC_REPEAT_SECOND,
RTCC_REPEAT_10THS,
RTCC_REPEAT_100THS,
};
/* -------------------------------------------------------------------------- */
enum {
RTCC_CONFKEY_OSCONTROL = 0xA1,
RTCC_CONFKEY_SWRESET = 0x3C,
RTCC_CONFKEY_DEFREGS = 0x9D,
};
/* -------------------------------------------------------------------------- */
enum {
RTCC_CAL_XT_OSC = 0,
RTCC_CAL_RC_OSC,
};
/* -------------------------------------------------------------------------- */
enum {
RTCC_AUTOCAL_DISABLE = 0,
RTCC_AUTOCAL_ONCE,
RTCC_AUTOCAL_17_MIN,
RTCC_AUTOCAL_9_MIN,
};
/** @} */
/* -------------------------------------------------------------------------- */
/** \name Readable Date and time memory map implementation
*
* This simplified structure allows the user to set date/alarms with a
* reduced structure, without the bit-defined restrictions of the memory map,
* using decimal values
*
* @{
*/
typedef struct ab0805_struct_simple_td_reg {
uint8_t miliseconds;
uint8_t seconds;
uint8_t minutes;
uint8_t hours;
uint8_t day;
uint8_t months;
uint8_t years;
uint8_t weekdays;
uint8_t mode;
uint8_t century;
} __attribute__ ((packed)) simple_td_map;
/** @} */
/* -------------------------------------------------------------------------- */
/**
* \name RTCC User functions
* @{
*/
/**
* \brief Set the time and date
* \param *data Time and date value (decimal format)
* \return
* \ AB08_SUCCESS date/time set
* \ AB08_ERROR failed to set time/date (enable DEBUG for more info)
*/
int8_t rtcc_set_time_date(simple_td_map *data);
/**
* \brief Get the current time and date
* \param *data buffer to store the results
* \return
* \ AB08_SUCCESS date/time set
* \ AB08_ERROR failed to set time/date (enable DEBUG for more info)
*/
int8_t rtcc_get_time_date(simple_td_map *data);
/**
* \brief Print data from the RTCC module, either from the memory
* map (values in BCD) or actual readable data (decimal).
* \param value value to print, see RTCC_PRINT_* options available
* \return
* \ AB08_SUCCESS date/time set
* \ AB08_ERROR failed to set time/date (enable DEBUG for more info)
*/
int8_t rtcc_print(uint8_t value);
/**
* \brief Configure the RTCC to match an alarm counter
* \param data date and time values (in decimal) to match against
* \param state set on/off the alarm interruption
* \param repeat set the frequency of the alarm (minute, hourly, daily, etc.)
* \return
* \ AB08_SUCCESS date/time set
* \ AB08_ERROR failed to set time/date (enable DEBUG for more info)
*/
int8_t rtcc_set_alarm_time_date(simple_td_map *data, uint8_t state,
uint8_t repeat);
/**
* \brief Manually calibrate the RTCC
* \param mode oscillator to calibrate
* \param adjust value (in ppm) to adjust the oscillator
* \return
* \ AB08_SUCCESS date/time set
* \ AB08_ERROR failed to set time/date (enable DEBUG for more info)
*/
int8_t rtcc_set_calibration(uint8_t mode, int32_t adjust);
/**
* \brief Set the autocallibration period
* \param period autocalibration configuration
* \return
* \ AB08_SUCCESS date/time set
* \ AB08_ERROR failed to set time/date (enable DEBUG for more info)
*/
int8_t rtcc_set_autocalibration(uint8_t period);
/**
* \brief Initialize the RTCC, configures the I2C bus, interrupts and registers
* \return
* \ AB08_SUCCESS date/time set
* \ AB08_ERROR failed to set time/date (enable DEBUG for more info)
*/
int8_t rtcc_init(void);
/** @} */
/* -------------------------------------------------------------------------- */
#endif /* ifndef RTCC_H_ */
/* -------------------------------------------------------------------------- */
/**
* @}
* @}
*/