nes-proj/platform/stepper-robot/contiki-conf.h

79 lines
2.0 KiB
C
Raw Normal View History

#ifndef __CONTIKI_CONF_H__CDBB4VIH3I__
#define __CONTIKI_CONF_H__CDBB4VIH3I__
#include <stdint.h>
#include <cc2420-interrupt.h>
#include <AT91SAM7S64.h>
#include <io.h>
#define CCIF
#define CLIF
#define WITH_UIP 1
#define WITH_ASCII 1
#define CLOCK_CONF_SECOND 100
typedef uint8_t u8_t;
typedef uint16_t u16_t;
typedef uint32_t u32_t;
typedef unsigned int clock_time_t;
typedef unsigned int uip_stats_t;
#ifndef BV
#define BV(x) (1<<(x))
#endif
/* SPI */
#define SPI_TXBUF *AT91C_SPI_TDR
#define SPI_RXBUF ((unsigned char)*AT91C_SPI_RDR)
#define SPI_WAITFOREOTx() while ((*AT91C_SPI_SR & AT91C_SPI_TXEMPTY) == 0)
#define SPI_WAITFOREORx() while ((*AT91C_SPI_SR & AT91C_SPI_RDRF) == 0)
/* CC2420 control pins */
#define FIFO_IS_1 (*AT91C_PIOA_PDSR & AT91C_PIO_PA2)
#define VREG_IS_1 1 /* Hardwired */
#define FIFOP_IS_1 (*AT91C_PIOA_PDSR & AT91C_PIO_PA30)
#define SFD_IS_1 (*AT91C_PIOA_PDSR & AT91C_PIO_PA15)
#define SET_RESET_INACTIVE() cc2420_setreg(CC2420_MAIN, 0xf800);
#define SET_RESET_ACTIVE() cc2420_setreg(CC2420_MAIN, 0x0000);
#define SET_VREG_ACTIVE()
#define SET_VREG_INACTIVE()
#define FIFOP_INT_INIT() cc2420_interrupt_fifop_int_init()
#define DISABLE_FIFOP_INT() (*AT91C_AIC_IDCR = (1 << AT91C_ID_IRQ1))
#define ENABLE_FIFOP_INT() (*AT91C_AIC_IECR = (1 << AT91C_ID_IRQ1))
#define CC2420_DEFAULT_DEV 1
#define SPI_ENABLE() \
do { \
*AT91C_SPI_MR = ((*AT91C_SPI_MR & ~AT91C_SPI_PCS) \
| ((~(1<<CC2420_DEFAULT_DEV) & 0x0f) << 16));\
} while(0)
/* Automatically enabled when transmitting */
#define SPI_DISABLE() (*AT91C_SPI_CR = AT91C_SPI_LASTXFER)
#define CLEAR_FIFOP_INT() /* Cleared by the wrapper */
#define LOOP_20_SYMBOLS (MCK/28125) /* Assume the loop takes 9 cycles */
/* uIP configuration */
#define UIP_CONF_LLH_LEN 0
#define UIP_CONF_BROADCAST 1
#define UIP_CONF_LOGGING 1
#define UIP_CONF_BUFFER_SIZE 116
/* Prefix for relocation sections in ELF files */
#define REL_SECT_PREFIX ".rel"
#endif /* __CONTIKI_CONF_H__CDBB4VIH3I__ */