nes-proj/os/net/ipv6/resolv.c

1478 lines
41 KiB
C
Raw Normal View History

/*
* Copyright (c) 2002-2003, Adam Dunkels.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote
* products derived from this software without specific prior
* written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* This file is part of the uIP TCP/IP stack.
*
*
*/
/**
* \file
* DNS host name to IP address resolver.
* \author Adam Dunkels <adam@dunkels.com>
* \author Robert Quattlebaum <darco@deepdarc.com>
*
* This file implements a DNS host name to IP address resolver,
* as well as an MDNS responder and resolver.
*/
/**
* \addtogroup uip
* @{
*/
/**
* \defgroup uipdns uIP hostname resolver functions
* @{
*
* The uIP DNS resolver functions are used to lookup a hostname and
* map it to a numerical IP address. It maintains a list of resolved
* hostnames that can be queried with the resolv_lookup()
* function. New hostnames can be resolved using the resolv_query()
* function.
*
* The event resolv_event_found is posted when a hostname has been
* resolved. It is up to the receiving process to determine if the
* correct hostname has been found by calling the resolv_lookup()
* function with the hostname.
*/
2017-09-22 13:06:44 +00:00
#include "net/ipv6/tcpip.h"
#include "net/ipv6/resolv.h"
#include "net/ipv6/uip-udp-packet.h"
#include "net/ipv6/uip-nameserver.h"
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
#include "lib/random.h"
#ifndef DEBUG
#define DEBUG CONTIKI_TARGET_COOJA
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
#endif
#if UIP_UDP
#include <string.h>
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
#include <stdio.h>
#include <ctype.h>
#ifndef NULL
#define NULL (void *)0
#endif /* NULL */
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
#if !defined(__SDCC) && defined(SDCC_REVISION)
2013-03-13 15:14:29 +00:00
#define __SDCC 1
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
#endif
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
#if VERBOSE_DEBUG
#define DEBUG_PRINTF(...) printf(__VA_ARGS__)
#else
#define DEBUG_PRINTF(...) do { } while(0)
#endif
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
#if DEBUG || VERBOSE_DEBUG
#define PRINTF(...) printf(__VA_ARGS__)
#else
#define PRINTF(...) do { } while(0)
#endif
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
#ifdef __SDCC
static int
strncasecmp(const char *s1, const char *s2, size_t n)
{
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
/* TODO: Add case support! */
return strncmp(s1, s2, n);
}
static int
strcasecmp(const char *s1, const char *s2)
{
/* TODO: Add case support! */
return strcmp(s1, s2);
}
#else
int strcasecmp(const char *s1, const char *s2);
int strncasecmp(const char *s1, const char *s2, size_t n);
2013-03-13 15:14:29 +00:00
#endif /* __SDCC */
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
2013-03-13 15:14:29 +00:00
#define UIP_UDP_BUF ((struct uip_udpip_hdr *)&uip_buf[UIP_LLH_LEN])
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
/* If RESOLV_CONF_SUPPORTS_MDNS is set, then queries
* for domain names in the local TLD will use mDNS as
* described by draft-cheshire-dnsext-multicastdns.
*/
#ifndef RESOLV_CONF_SUPPORTS_MDNS
2013-03-13 15:14:29 +00:00
#define RESOLV_CONF_SUPPORTS_MDNS 1
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
#endif
#ifndef RESOLV_CONF_MDNS_INCLUDE_GLOBAL_V6_ADDRS
2013-03-13 15:14:29 +00:00
#define RESOLV_CONF_MDNS_INCLUDE_GLOBAL_V6_ADDRS 0
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
#endif
/** The maximum number of retries when asking for a name. */
#ifndef RESOLV_CONF_MAX_RETRIES
2013-03-13 15:14:29 +00:00
#define RESOLV_CONF_MAX_RETRIES 4
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
#endif
#ifndef RESOLV_CONF_MAX_MDNS_RETRIES
2013-03-13 15:14:29 +00:00
#define RESOLV_CONF_MAX_MDNS_RETRIES 3
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
#endif
#ifndef RESOLV_CONF_MAX_DOMAIN_NAME_SIZE
2013-03-13 15:14:29 +00:00
#define RESOLV_CONF_MAX_DOMAIN_NAME_SIZE 32
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
#endif
#ifdef RESOLV_CONF_AUTO_REMOVE_TRAILING_DOTS
#define RESOLV_AUTO_REMOVE_TRAILING_DOTS RESOLV_CONF_AUTO_REMOVE_TRAILING_DOTS
#else
#define RESOLV_AUTO_REMOVE_TRAILING_DOTS RESOLV_CONF_SUPPORTS_MDNS
#endif
#ifdef RESOLV_CONF_VERIFY_ANSWER_NAMES
#define RESOLV_VERIFY_ANSWER_NAMES RESOLV_CONF_VERIFY_ANSWER_NAMES
#else
#define RESOLV_VERIFY_ANSWER_NAMES RESOLV_CONF_SUPPORTS_MDNS
#endif
#ifdef RESOLV_CONF_SUPPORTS_RECORD_EXPIRATION
#define RESOLV_SUPPORTS_RECORD_EXPIRATION RESOLV_CONF_SUPPORTS_RECORD_EXPIRATION
#else
#define RESOLV_SUPPORTS_RECORD_EXPIRATION 1
#endif
#if RESOLV_CONF_SUPPORTS_MDNS && !RESOLV_VERIFY_ANSWER_NAMES
#error RESOLV_CONF_SUPPORTS_MDNS cannot be set without RESOLV_CONF_VERIFY_ANSWER_NAMES
#endif
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
#if !defined(CONTIKI_TARGET_NAME) && defined(BOARD)
2013-03-13 15:14:29 +00:00
#define stringy2(x) #x
#define stringy(x) stringy2(x)
#define CONTIKI_TARGET_NAME stringy(BOARD)
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
#endif
#ifndef CONTIKI_CONF_DEFAULT_HOSTNAME
#ifdef CONTIKI_TARGET_NAME
2013-03-13 15:14:29 +00:00
#define CONTIKI_CONF_DEFAULT_HOSTNAME "contiki-"CONTIKI_TARGET_NAME
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
#else
2013-03-13 15:14:29 +00:00
#define CONTIKI_CONF_DEFAULT_HOSTNAME "contiki"
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
#endif
#endif
2013-03-13 15:14:29 +00:00
#define DNS_TYPE_A 1
#define DNS_TYPE_CNAME 5
#define DNS_TYPE_PTR 12
#define DNS_TYPE_MX 15
#define DNS_TYPE_TXT 16
#define DNS_TYPE_AAAA 28
#define DNS_TYPE_SRV 33
#define DNS_TYPE_ANY 255
#define DNS_TYPE_NSEC 47
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
#define NATIVE_DNS_TYPE DNS_TYPE_AAAA /* IPv6 */
2013-03-13 15:14:29 +00:00
#define DNS_CLASS_IN 1
#define DNS_CLASS_ANY 255
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
#ifndef DNS_PORT
2013-03-13 15:14:29 +00:00
#define DNS_PORT 53
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
#endif
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
#ifndef MDNS_PORT
2013-03-13 15:14:29 +00:00
#define MDNS_PORT 5353
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
#endif
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
#ifndef MDNS_RESPONDER_PORT
2013-03-13 15:14:29 +00:00
#define MDNS_RESPONDER_PORT 5354
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
#endif
/** \internal The DNS message header. */
struct dns_hdr {
uint16_t id;
uint8_t flags1, flags2;
#define DNS_FLAG1_RESPONSE 0x80
#define DNS_FLAG1_OPCODE_STATUS 0x10
#define DNS_FLAG1_OPCODE_INVERSE 0x08
#define DNS_FLAG1_OPCODE_STANDARD 0x00
#define DNS_FLAG1_AUTHORATIVE 0x04
#define DNS_FLAG1_TRUNC 0x02
#define DNS_FLAG1_RD 0x01
#define DNS_FLAG2_RA 0x80
#define DNS_FLAG2_ERR_MASK 0x0f
#define DNS_FLAG2_ERR_NONE 0x00
#define DNS_FLAG2_ERR_NAME 0x03
uint16_t numquestions;
uint16_t numanswers;
uint16_t numauthrr;
uint16_t numextrarr;
};
/** \internal The DNS answer message structure. */
struct dns_answer {
/* DNS answer record starts with either a domain name or a pointer
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
* to a name already present somewhere in the packet. */
uint16_t type;
uint16_t class;
uint16_t ttl[2];
uint16_t len;
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
uint8_t ipaddr[16];
};
struct namemap {
#define STATE_UNUSED 0
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
#define STATE_ERROR 1
#define STATE_NEW 2
#define STATE_ASKING 3
#define STATE_DONE 4
uint8_t state;
uint8_t tmr;
uint16_t id;
uint8_t retries;
uint8_t seqno;
#if RESOLV_SUPPORTS_RECORD_EXPIRATION
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
unsigned long expiration;
#endif /* RESOLV_SUPPORTS_RECORD_EXPIRATION */
uip_ipaddr_t ipaddr;
uint8_t err;
uint8_t server;
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
#if RESOLV_CONF_SUPPORTS_MDNS
2013-03-12 01:07:29 +00:00
int is_mdns:1, is_probe:1;
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
#endif
char name[RESOLV_CONF_MAX_DOMAIN_NAME_SIZE + 1];
};
#ifndef UIP_CONF_RESOLV_ENTRIES
#define RESOLV_ENTRIES 4
#else /* UIP_CONF_RESOLV_ENTRIES */
#define RESOLV_ENTRIES UIP_CONF_RESOLV_ENTRIES
#endif /* UIP_CONF_RESOLV_ENTRIES */
static struct namemap names[RESOLV_ENTRIES];
static uint8_t seqno;
static struct uip_udp_conn *resolv_conn = NULL;
static struct etimer retry;
process_event_t resolv_event_found;
PROCESS(resolv_process, "DNS resolver");
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
static void resolv_found(char *name, uip_ipaddr_t * ipaddr);
/** \internal The DNS question message structure. */
struct dns_question {
uint16_t type;
uint16_t class;
};
#if RESOLV_CONF_SUPPORTS_MDNS
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
static char resolv_hostname[RESOLV_CONF_MAX_DOMAIN_NAME_SIZE + 1];
enum {
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
MDNS_STATE_WAIT_BEFORE_PROBE,
MDNS_STATE_PROBING,
MDNS_STATE_READY,
};
static uint8_t mdns_state;
static const uip_ipaddr_t resolv_mdns_addr =
{ { 0xff, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfb } };
#include "net/ipv6/uip-ds6.h"
2017-06-16 15:02:42 +00:00
static int mdns_needs_host_announce;
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
PROCESS(mdns_probe_process, "mDNS probe");
#endif /* RESOLV_CONF_SUPPORTS_MDNS */
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
/*---------------------------------------------------------------------------*/
#if RESOLV_VERIFY_ANSWER_NAMES || VERBOSE_DEBUG
/** \internal
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
* \brief Decodes a DNS name from the DNS format into the given string.
* \return 1 upon success, 0 if the size of the name would be too large.
*
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
* \note `dest` must point to a buffer with at least
* `RESOLV_CONF_MAX_DOMAIN_NAME_SIZE+1` bytes large.
*/
static uint8_t
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
decode_name(const unsigned char *query, char *dest,
const unsigned char *packet)
{
int len = RESOLV_CONF_MAX_DOMAIN_NAME_SIZE;
unsigned char n = *query++;
//DEBUG_PRINTF("resolver: decoding name: \"");
while(len && n) {
if(n & 0xc0) {
const uint16_t offset = query[0] + ((n & ~0xC0) << 8);
//DEBUG_PRINTF("<skip-to-%d>",offset);
query = packet + offset;
n = *query++;
}
if(!n)
break;
for(; n; --n) {
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
//DEBUG_PRINTF("%c",*query);
*dest++ = *query++;
if(!--len) {
*dest = 0;
return 0;
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
}
}
n = *query++;
if(n) {
//DEBUG_PRINTF(".");
*dest++ = '.';
--len;
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
}
}
//DEBUG_PRINTF("\"\n");
*dest = 0;
return len != 0;
}
/*---------------------------------------------------------------------------*/
/** \internal
*/
static uint8_t
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
dns_name_isequal(const unsigned char *queryptr, const char *name,
const unsigned char *packet)
{
unsigned char n = *queryptr++;
if(*name == 0)
return 0;
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
while(n) {
if(n & 0xc0) {
queryptr = packet + queryptr[0] + ((n & ~0xC0) << 8);
n = *queryptr++;
}
for(; n; --n) {
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
if(!*name) {
return 0;
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
}
if(tolower((unsigned int)*name++) != tolower((unsigned int)*queryptr++)) {
return 0;
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
}
}
n = *queryptr++;
if((n != 0) && (*name++ != '.')) {
return 0;
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
}
}
if(*name == '.')
++name;
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
return name[0] == 0;
}
#endif /* RESOLV_VERIFY_ANSWER_NAMES */
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
/*---------------------------------------------------------------------------*/
/** \internal
*/
static unsigned char *
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
skip_name(unsigned char *query)
{
unsigned char n;
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
DEBUG_PRINTF("resolver: skip name: ");
do {
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
n = *query;
if(n & 0xc0) {
DEBUG_PRINTF("<skip-to-%d>", query[0] + ((n & ~0xC0) << 8));
++query;
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
break;
}
++query;
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
while(n > 0) {
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
DEBUG_PRINTF("%c", *query);
++query;
--n;
};
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
DEBUG_PRINTF(".");
} while(*query != 0);
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
DEBUG_PRINTF("\n");
return query + 1;
}
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
/*---------------------------------------------------------------------------*/
/** \internal
*/
static unsigned char *
encode_name(unsigned char *query, const char *nameptr)
{
char *nptr;
--nameptr;
/* Convert hostname into suitable query format. */
do {
uint8_t n = 0;
++nameptr;
nptr = (char *)query;
++query;
for(n = 0; *nameptr != '.' && *nameptr != 0; ++nameptr) {
*query = *nameptr;
++query;
++n;
}
*nptr = n;
} while(*nameptr != 0);
/* End the the name. */
*query++ = 0;
return query;
}
/*---------------------------------------------------------------------------*/
2013-03-13 15:14:29 +00:00
#if RESOLV_CONF_SUPPORTS_MDNS
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
/** \internal
*/
static void
mdns_announce_requested(void)
{
mdns_needs_host_announce = 1;
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
}
/*---------------------------------------------------------------------------*/
/** \internal
*/
static void
start_name_collision_check(clock_time_t after)
{
process_exit(&mdns_probe_process);
process_start(&mdns_probe_process, (void *)&after);
}
/*---------------------------------------------------------------------------*/
/** \internal
*/
static unsigned char *
mdns_write_announce_records(unsigned char *queryptr, uint8_t *count)
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
{
uint8_t i;
for(i = 0; i < UIP_DS6_ADDR_NB; ++i) {
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
if(uip_ds6_if.addr_list[i].isused
#if !RESOLV_CONF_MDNS_INCLUDE_GLOBAL_V6_ADDRS
&& uip_is_addr_linklocal(&uip_ds6_if.addr_list[i].ipaddr)
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
#endif
) {
if(!*count) {
queryptr = encode_name(queryptr, resolv_hostname);
} else {
/* Use name compression to refer back to the first name */
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
*queryptr++ = 0xc0;
*queryptr++ = sizeof(struct dns_hdr);
}
*queryptr++ = (uint8_t) ((NATIVE_DNS_TYPE) >> 8);
*queryptr++ = (uint8_t) ((NATIVE_DNS_TYPE));
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
*queryptr++ = (uint8_t) ((DNS_CLASS_IN | 0x8000) >> 8);
*queryptr++ = (uint8_t) ((DNS_CLASS_IN | 0x8000));
*queryptr++ = 0;
*queryptr++ = 0;
*queryptr++ = 0;
*queryptr++ = 120;
*queryptr++ = 0;
*queryptr++ = sizeof(uip_ipaddr_t);
uip_ipaddr_copy((uip_ipaddr_t*)queryptr, &uip_ds6_if.addr_list[i].ipaddr);
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
queryptr += sizeof(uip_ipaddr_t);
++(*count);
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
}
}
return queryptr;
}
/*---------------------------------------------------------------------------*/
/** \internal
* Called when we need to announce ourselves
*/
static size_t
mdns_prep_host_announce_packet(void)
{
static const struct {
uint16_t type;
uint16_t class;
uint16_t ttl[2];
uint16_t len;
uint8_t data[8];
} nsec_record = {
UIP_HTONS(DNS_TYPE_NSEC),
UIP_HTONS(DNS_CLASS_IN | 0x8000),
{ 0, UIP_HTONS(120) },
UIP_HTONS(8),
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
{
0xc0,
sizeof(struct dns_hdr), /* Name compression. Re-using the name of first record. */
0x00,
0x04,
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
0x00,
0x00,
0x00,
0x08,
}
};
unsigned char *queryptr;
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
uint8_t total_answers = 0;
/* Be aware that, unless `ARCH_DOESNT_NEED_ALIGNED_STRUCTS` is set,
* writing directly to the uint16_t members of this struct is an error. */
struct dns_hdr *hdr = (struct dns_hdr *)uip_appdata;
/* Zero out the header */
memset((void *)hdr, 0, sizeof(*hdr));
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
hdr->flags1 |= DNS_FLAG1_RESPONSE | DNS_FLAG1_AUTHORATIVE;
queryptr = (unsigned char *)uip_appdata + sizeof(*hdr);
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
queryptr = mdns_write_announce_records(queryptr, &total_answers);
/* We now need to add an NSEC record to indicate
* that this is all there is.
*/
if(!total_answers) {
queryptr = encode_name(queryptr, resolv_hostname);
} else {
/* Name compression. Re-using the name of first record. */
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
*queryptr++ = 0xc0;
*queryptr++ = sizeof(*hdr);
}
memcpy((void *)queryptr, (void *)&nsec_record, sizeof(nsec_record));
queryptr += sizeof(nsec_record);
/* This platform might be picky about alignment. To avoid the possibility
* of doing an unaligned write, we are going to do this manually. */
((uint8_t*)&hdr->numanswers)[1] = total_answers;
((uint8_t*)&hdr->numextrarr)[1] = 1;
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
return (queryptr - (unsigned char *)uip_appdata);
}
2013-03-13 15:14:29 +00:00
#endif /* RESOLV_CONF_SUPPORTS_MDNS */
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
/*---------------------------------------------------------------------------*/
static char
try_next_server(struct namemap *namemapptr)
{
#if VERBOSE_DEBUG
printf("server %d\n", namemapptr->server);
#endif
2014-12-10 08:28:34 +00:00
namemapptr->server++;
if(uip_nameserver_get(namemapptr->server) != NULL) {
namemapptr->retries = 0;
return 1;
}
namemapptr->server = 0;
return 0;
}
/*---------------------------------------------------------------------------*/
/** \internal
* Runs through the list of names to see if there are any that have
* not yet been queried and, if so, sends out a query.
*/
static void
check_entries(void)
{
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
volatile uint8_t i;
uint8_t *query;
register struct dns_hdr *hdr;
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
register struct namemap *namemapptr;
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
for(i = 0; i < RESOLV_ENTRIES; ++i) {
namemapptr = &names[i];
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
if(namemapptr->state == STATE_NEW || namemapptr->state == STATE_ASKING) {
etimer_set(&retry, CLOCK_SECOND / 4);
if(namemapptr->state == STATE_ASKING) {
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
if(--namemapptr->tmr == 0) {
#if RESOLV_CONF_SUPPORTS_MDNS
if(++namemapptr->retries ==
(namemapptr->is_mdns ? RESOLV_CONF_MAX_MDNS_RETRIES :
RESOLV_CONF_MAX_RETRIES))
2013-03-13 15:14:29 +00:00
#else /* RESOLV_CONF_SUPPORTS_MDNS */
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
if(++namemapptr->retries == RESOLV_CONF_MAX_RETRIES)
2013-03-13 15:14:29 +00:00
#endif /* RESOLV_CONF_SUPPORTS_MDNS */
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
{
/* Try the next server (if possible) before failing. Otherwise
simply mark the entry as failed. */
if(try_next_server(namemapptr) == 0) {
/* STATE_ERROR basically means "not found". */
namemapptr->state = STATE_ERROR;
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
#if RESOLV_SUPPORTS_RECORD_EXPIRATION
/* Keep the "not found" error valid for 30 seconds */
namemapptr->expiration = clock_seconds() + 30;
#endif /* RESOLV_SUPPORTS_RECORD_EXPIRATION */
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
resolv_found(namemapptr->name, NULL);
continue;
}
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
}
namemapptr->tmr = namemapptr->retries * namemapptr->retries * 3;
#if RESOLV_CONF_SUPPORTS_MDNS
if(namemapptr->is_probe) {
/* Probing retries are much more aggressive, 250ms */
namemapptr->tmr = 2;
}
2013-03-13 15:14:29 +00:00
#endif /* RESOLV_CONF_SUPPORTS_MDNS */
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
} else {
/* Its timer has not run out, so we move on to next
* entry.
*/
continue;
}
} else {
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
namemapptr->state = STATE_ASKING;
namemapptr->tmr = 1;
namemapptr->retries = 0;
}
hdr = (struct dns_hdr *)uip_appdata;
memset(hdr, 0, sizeof(struct dns_hdr));
hdr->id = random_rand();
namemapptr->id = hdr->id;
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
#if RESOLV_CONF_SUPPORTS_MDNS
if(!namemapptr->is_mdns || namemapptr->is_probe) {
hdr->flags1 = DNS_FLAG1_RD;
}
if(namemapptr->is_mdns) {
hdr->id = 0;
}
2013-03-13 15:14:29 +00:00
#else /* RESOLV_CONF_SUPPORTS_MDNS */
hdr->flags1 = DNS_FLAG1_RD;
2013-03-13 15:14:29 +00:00
#endif /* RESOLV_CONF_SUPPORTS_MDNS */
hdr->numquestions = UIP_HTONS(1);
query = (unsigned char *)uip_appdata + sizeof(*hdr);
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
query = encode_name(query, namemapptr->name);
#if RESOLV_CONF_SUPPORTS_MDNS
if(namemapptr->is_probe) {
*query++ = (uint8_t) ((DNS_TYPE_ANY) >> 8);
*query++ = (uint8_t) ((DNS_TYPE_ANY));
} else
2013-03-13 15:14:29 +00:00
#endif /* RESOLV_CONF_SUPPORTS_MDNS */
{
*query++ = (uint8_t) ((NATIVE_DNS_TYPE) >> 8);
*query++ = (uint8_t) ((NATIVE_DNS_TYPE));
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
}
*query++ = (uint8_t) ((DNS_CLASS_IN) >> 8);
*query++ = (uint8_t) ((DNS_CLASS_IN));
#if RESOLV_CONF_SUPPORTS_MDNS
if(namemapptr->is_mdns) {
if(namemapptr->is_probe) {
/* This is our conflict detection request.
* In order to be in compliance with the MDNS
* spec, we need to add the records we are proposing
* to the rrauth section.
*/
uint8_t count = 0;
query = mdns_write_announce_records(query, &count);
hdr->numauthrr = UIP_HTONS(count);
}
2013-03-13 15:14:29 +00:00
uip_udp_packet_sendto(resolv_conn, uip_appdata,
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
(query - (uint8_t *) uip_appdata),
&resolv_mdns_addr, UIP_HTONS(MDNS_PORT));
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
PRINTF("resolver: (i=%d) Sent MDNS %s for \"%s\".\n", i,
namemapptr->is_probe?"probe":"request",namemapptr->name);
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
} else {
2013-03-13 15:14:29 +00:00
uip_udp_packet_sendto(resolv_conn, uip_appdata,
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
(query - (uint8_t *) uip_appdata),
(const uip_ipaddr_t *)
2017-06-16 15:02:42 +00:00
uip_nameserver_get(namemapptr->server),
UIP_HTONS(DNS_PORT));
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
PRINTF("resolver: (i=%d) Sent DNS request for \"%s\".\n", i,
namemapptr->name);
}
2013-03-13 15:14:29 +00:00
#else /* RESOLV_CONF_SUPPORTS_MDNS */
uip_udp_packet_sendto(resolv_conn, uip_appdata,
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
(query - (uint8_t *) uip_appdata),
2017-06-16 15:02:42 +00:00
uip_nameserver_get(namemapptr->server),
UIP_HTONS(DNS_PORT));
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
PRINTF("resolver: (i=%d) Sent DNS request for \"%s\".\n", i,
namemapptr->name);
2013-03-13 15:14:29 +00:00
#endif /* RESOLV_CONF_SUPPORTS_MDNS */
break;
}
}
}
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
/*---------------------------------------------------------------------------*/
/** \internal
* Called when new UDP data arrives.
*/
static void
newdata(void)
{
uint8_t nquestions, nanswers;
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
int8_t i;
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
2015-05-06 14:56:19 +00:00
register struct namemap *namemapptr = NULL;
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
struct dns_answer *ans;
register struct dns_hdr const *hdr = (struct dns_hdr *)uip_appdata;
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
unsigned char *queryptr = (unsigned char *)hdr + sizeof(*hdr);
const uint8_t is_request = ((hdr->flags1 & ~1) == 0) && (hdr->flags2 == 0);
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
/* We only care about the question(s) and the answers. The authrr
* and the extrarr are simply discarded.
*/
nquestions = (uint8_t) uip_ntohs(hdr->numquestions);
nanswers = (uint8_t) uip_ntohs(hdr->numanswers);
queryptr = (unsigned char *)hdr + sizeof(*hdr);
i = 0;
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
DEBUG_PRINTF
("resolver: flags1=0x%02X flags2=0x%02X nquestions=%d, nanswers=%d, nauthrr=%d, nextrarr=%d\n",
hdr->flags1, hdr->flags2, (uint8_t) nquestions, (uint8_t) nanswers,
(uint8_t) uip_ntohs(hdr->numauthrr),
(uint8_t) uip_ntohs(hdr->numextrarr));
if(is_request && (nquestions == 0)) {
/* Skip requests with no questions. */
DEBUG_PRINTF("resolver: Skipping request with no questions.\n");
return;
}
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
/** QUESTION HANDLING SECTION ************************************************/
for(; nquestions > 0;
queryptr = skip_name(queryptr) + sizeof(struct dns_question),
--nquestions
) {
#if RESOLV_CONF_SUPPORTS_MDNS
if(!is_request) {
/* If this isn't a request, we don't need to bother
* looking at the individual questions. For the most
* part, this loop to just used to skip past them.
*/
continue;
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
}
{
struct dns_question *question = (struct dns_question *)skip_name(queryptr);
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
#if !ARCH_DOESNT_NEED_ALIGNED_STRUCTS
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
static struct dns_question aligned;
memcpy(&aligned, question, sizeof(aligned));
question = &aligned;
#endif /* !ARCH_DOESNT_NEED_ALIGNED_STRUCTS */
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
DEBUG_PRINTF("resolver: Question %d: type=%d class=%d\n", ++i,
uip_htons(question->type), uip_htons(question->class));
if(((uip_ntohs(question->class) & 0x7FFF) != DNS_CLASS_IN) ||
((question->type != UIP_HTONS(DNS_TYPE_ANY)) &&
(question->type != UIP_HTONS(NATIVE_DNS_TYPE)))) {
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
/* Skip unrecognised records. */
continue;
}
if(!dns_name_isequal(queryptr, resolv_hostname, uip_appdata)) {
continue;
}
PRINTF("resolver: THIS IS A REQUEST FOR US!!!\n");
if(mdns_state == MDNS_STATE_READY) {
/* We only send immediately if this isn't an MDNS request.
* Otherwise, we schedule ourselves to send later.
*/
if(UIP_UDP_BUF->srcport == UIP_HTONS(MDNS_PORT)) {
mdns_announce_requested();
} else {
2013-03-13 15:14:29 +00:00
uip_udp_packet_sendto(resolv_conn, uip_appdata,
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
mdns_prep_host_announce_packet(),
&UIP_UDP_BUF->srcipaddr,
UIP_UDP_BUF->srcport);
}
return;
} else {
uint8_t nauthrr;
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
PRINTF("resolver: But we are still probing. Waiting...\n");
/* We are still probing. We need to do the mDNS
* probe race condition check here and make sure
* we don't need to delay probing for a second.
*/
nauthrr = (uint8_t)uip_ntohs(hdr->numauthrr);
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
/* For now, we will always restart the collision check if
* there are *any* authority records present.
* In the future we should follow the spec more closely,
* but this should eventually converge to something reasonable.
*/
if(nauthrr) {
start_name_collision_check(CLOCK_SECOND);
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
}
}
}
#endif /* RESOLV_CONF_SUPPORTS_MDNS */
}
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
/** ANSWER HANDLING SECTION **************************************************/
if(nanswers == 0) {
/* Skip responses with no answers. */
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
return;
}
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
#if RESOLV_CONF_SUPPORTS_MDNS
if(UIP_UDP_BUF->srcport == UIP_HTONS(MDNS_PORT) &&
hdr->id == 0) {
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
/* OK, this was from MDNS. Things get a little weird here,
* because we can't use the `id` field. We will look up the
* appropriate request in a later step. */
i = -1;
namemapptr = NULL;
} else
2013-03-13 15:14:29 +00:00
#endif /* RESOLV_CONF_SUPPORTS_MDNS */
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
{
for(i = 0; i < RESOLV_ENTRIES; ++i) {
namemapptr = &names[i];
if(namemapptr->state == STATE_ASKING &&
namemapptr->id == hdr->id) {
break;
}
}
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
if(i >= RESOLV_ENTRIES || i < 0 || namemapptr->state != STATE_ASKING) {
PRINTF("resolver: DNS response has bad ID (%04X) \n", uip_ntohs(hdr->id));
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
return;
}
PRINTF("resolver: Incoming response for \"%s\".\n", namemapptr->name);
/* We'll change this to DONE when we find the record. */
namemapptr->state = STATE_ERROR;
namemapptr->err = hdr->flags2 & DNS_FLAG2_ERR_MASK;
#if RESOLV_SUPPORTS_RECORD_EXPIRATION
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
/* If we remain in the error state, keep it cached for 30 seconds. */
namemapptr->expiration = clock_seconds() + 30;
#endif /* RESOLV_SUPPORTS_RECORD_EXPIRATION */
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
/* Check for error. If so, call callback to inform. */
if(namemapptr->err != 0) {
namemapptr->state = STATE_ERROR;
resolv_found(namemapptr->name, NULL);
return;
}
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
}
i = 0;
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
/* Answer parsing loop */
while(nanswers > 0) {
ans = (struct dns_answer *)skip_name(queryptr);
#if !ARCH_DOESNT_NEED_ALIGNED_STRUCTS
2013-03-12 01:07:29 +00:00
{
static struct dns_answer aligned;
memcpy(&aligned, ans, sizeof(aligned));
ans = &aligned;
}
#endif /* !ARCH_DOESNT_NEED_ALIGNED_STRUCTS */
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
#if VERBOSE_DEBUG
char debug_name[40];
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
decode_name(queryptr, debug_name, uip_appdata);
DEBUG_PRINTF("resolver: Answer %d: \"%s\", type %d, class %d, ttl %d, length %d\n",
++i, debug_name, uip_ntohs(ans->type),
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
uip_ntohs(ans->class) & 0x7FFF,
(int)((uint32_t) uip_ntohs(ans->ttl[0]) << 16) | (uint32_t)
uip_ntohs(ans->ttl[1]), uip_ntohs(ans->len));
2013-03-13 15:14:29 +00:00
#endif /* VERBOSE_DEBUG */
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
/* Check the class and length of the answer to make sure
* it matches what we are expecting
*/
2013-03-13 15:14:29 +00:00
if(((uip_ntohs(ans->class) & 0x7FFF) != DNS_CLASS_IN) ||
(ans->len != UIP_HTONS(sizeof(uip_ipaddr_t)))) {
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
goto skip_to_next_answer;
}
if(ans->type != UIP_HTONS(NATIVE_DNS_TYPE)) {
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
goto skip_to_next_answer;
}
#if RESOLV_CONF_SUPPORTS_MDNS
if(UIP_UDP_BUF->srcport == UIP_HTONS(MDNS_PORT) &&
hdr->id == 0) {
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
int8_t available_i = RESOLV_ENTRIES;
DEBUG_PRINTF("resolver: MDNS query.\n");
/* For MDNS, we need to actually look up the name we
* are looking for.
*/
for(i = 0; i < RESOLV_ENTRIES; ++i) {
namemapptr = &names[i];
if(dns_name_isequal(queryptr, namemapptr->name, uip_appdata)) {
break;
}
if((namemapptr->state == STATE_UNUSED)
#if RESOLV_SUPPORTS_RECORD_EXPIRATION
|| (namemapptr->state == STATE_DONE && clock_seconds() > namemapptr->expiration)
#endif /* RESOLV_SUPPORTS_RECORD_EXPIRATION */
) {
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
available_i = i;
}
}
if(i == RESOLV_ENTRIES) {
DEBUG_PRINTF("resolver: Unsolicited MDNS response.\n");
i = available_i;
namemapptr = &names[i];
if(!decode_name(queryptr, namemapptr->name, uip_appdata)) {
DEBUG_PRINTF("resolver: MDNS name too big to cache.\n");
namemapptr = NULL;
goto skip_to_next_answer;
}
}
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
if(i == RESOLV_ENTRIES) {
DEBUG_PRINTF
("resolver: Not enough room to keep track of unsolicited MDNS answer.\n");
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
if(dns_name_isequal(queryptr, resolv_hostname, uip_appdata)) {
/* Oh snap, they say they are us! We had better report them... */
resolv_found(resolv_hostname, (uip_ipaddr_t *) ans->ipaddr);
}
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
namemapptr = NULL;
goto skip_to_next_answer;
}
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
namemapptr = &names[i];
} else
2013-03-13 15:14:29 +00:00
#endif /* RESOLV_CONF_SUPPORTS_MDNS */
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
{
/* This will force us to stop even if there are more answers. */
nanswers = 1;
}
/* This is disabled for now, so that we don't fail on CNAME records.
#if RESOLV_VERIFY_ANSWER_NAMES
if(namemapptr && !dns_name_isequal(queryptr, namemapptr->name, uip_appdata)) {
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
DEBUG_PRINTF("resolver: Answer name doesn't match question...!\n");
goto skip_to_next_answer;
}
#endif
*/
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
DEBUG_PRINTF("resolver: Answer for \"%s\" is usable.\n", namemapptr->name);
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
namemapptr->state = STATE_DONE;
#if RESOLV_SUPPORTS_RECORD_EXPIRATION
namemapptr->expiration = (uint32_t) uip_ntohs(ans->ttl[0]) << 16 |
(uint32_t) uip_ntohs(ans->ttl[1]);
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
namemapptr->expiration += clock_seconds();
#endif /* RESOLV_SUPPORTS_RECORD_EXPIRATION */
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
uip_ipaddr_copy(&namemapptr->ipaddr, (uip_ipaddr_t *) ans->ipaddr);
resolv_found(namemapptr->name, &namemapptr->ipaddr);
break;
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
skip_to_next_answer:
2013-03-13 15:14:29 +00:00
queryptr = (unsigned char *)skip_name(queryptr) + 10 + uip_htons(ans->len);
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
--nanswers;
}
/* Got to this point there's no answer, try next nameserver if available
since this one doesn't know the answer */
#if RESOLV_CONF_SUPPORTS_MDNS
2017-06-16 15:02:42 +00:00
if(nanswers == 0 && UIP_UDP_BUF->srcport != UIP_HTONS(MDNS_PORT)
&& hdr->id != 0)
#else
2017-06-16 15:02:42 +00:00
if(nanswers == 0)
#endif
{
if(try_next_server(namemapptr)) {
namemapptr->state = STATE_ASKING;
process_post(&resolv_process, PROCESS_EVENT_TIMER, NULL);
}
}
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
}
/*---------------------------------------------------------------------------*/
2013-03-13 15:14:29 +00:00
#if RESOLV_CONF_SUPPORTS_MDNS
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
/**
* \brief Changes the local hostname advertised by MDNS.
* \param hostname The new hostname to advertise.
*/
void
resolv_set_hostname(const char *hostname)
{
strncpy(resolv_hostname, hostname, RESOLV_CONF_MAX_DOMAIN_NAME_SIZE);
/* Add the .local suffix if it isn't already there */
2013-03-13 15:14:29 +00:00
if(strlen(resolv_hostname) < 7 ||
strcasecmp(resolv_hostname + strlen(resolv_hostname) - 6, ".local") != 0) {
2017-04-11 13:27:55 +00:00
strncat(resolv_hostname, ".local", RESOLV_CONF_MAX_DOMAIN_NAME_SIZE - strlen(resolv_hostname));
}
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
PRINTF("resolver: hostname changed to \"%s\"\n", resolv_hostname);
start_name_collision_check(0);
}
/*---------------------------------------------------------------------------*/
/**
* \brief Returns the local hostname being advertised via MDNS.
* \return C-string containing the local hostname.
*/
const char *
resolv_get_hostname(void)
{
return resolv_hostname;
}
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
/*---------------------------------------------------------------------------*/
/** \internal
* Process for probing for name conflicts.
*/
PROCESS_THREAD(mdns_probe_process, ev, data)
{
static struct etimer delay;
PROCESS_BEGIN();
mdns_state = MDNS_STATE_WAIT_BEFORE_PROBE;
PRINTF("mdns-probe: Process (re)started.\n");
/* Wait extra time if specified in data */
if(NULL != data) {
PRINTF("mdns-probe: Probing will begin in %ld clocks.\n",
(long)*(clock_time_t *) data);
etimer_set(&delay, *(clock_time_t *) data);
PROCESS_WAIT_EVENT_UNTIL(ev == PROCESS_EVENT_TIMER);
}
/* We need to wait a random (0-250ms) period of time before
* probing to be in compliance with the MDNS spec. */
etimer_set(&delay, CLOCK_SECOND * (random_rand() & 0xFF) / 1024);
PROCESS_WAIT_EVENT_UNTIL(ev == PROCESS_EVENT_TIMER);
/* Begin searching for our name. */
mdns_state = MDNS_STATE_PROBING;
resolv_query(resolv_hostname);
do {
PROCESS_WAIT_EVENT_UNTIL(ev == resolv_event_found);
} while(strcasecmp(resolv_hostname, data) != 0);
mdns_state = MDNS_STATE_READY;
mdns_announce_requested();
PRINTF("mdns-probe: Finished probing.\n");
PROCESS_END();
}
2013-03-13 15:14:29 +00:00
#endif /* RESOLV_CONF_SUPPORTS_MDNS */
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
/*---------------------------------------------------------------------------*/
/** \internal
* The main UDP function.
*/
PROCESS_THREAD(resolv_process, ev, data)
{
PROCESS_BEGIN();
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
memset(names, 0, sizeof(names));
resolv_event_found = process_alloc_event();
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
PRINTF("resolver: Process started.\n");
resolv_conn = udp_new(NULL, 0, NULL);
#if RESOLV_CONF_SUPPORTS_MDNS
PRINTF("resolver: Supports MDNS.\n");
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
uip_udp_bind(resolv_conn, UIP_HTONS(MDNS_PORT));
uip_ds6_maddr_add(&resolv_mdns_addr);
resolv_set_hostname(CONTIKI_CONF_DEFAULT_HOSTNAME);
#endif /* RESOLV_CONF_SUPPORTS_MDNS */
while(1) {
PROCESS_WAIT_EVENT();
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
if(ev == PROCESS_EVENT_TIMER) {
tcpip_poll_udp(resolv_conn);
} else if(ev == tcpip_event) {
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
if(uip_udp_conn == resolv_conn) {
if(uip_newdata()) {
newdata();
}
if(uip_poll()) {
#if RESOLV_CONF_SUPPORTS_MDNS
if(mdns_needs_host_announce) {
size_t len;
PRINTF("resolver: Announcing that we are \"%s\".\n",
resolv_hostname);
memset(uip_appdata, 0, sizeof(struct dns_hdr));
len = mdns_prep_host_announce_packet();
2013-03-13 15:14:29 +00:00
uip_udp_packet_sendto(resolv_conn, uip_appdata,
len, &resolv_mdns_addr, UIP_HTONS(MDNS_PORT));
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
mdns_needs_host_announce = 0;
/* Poll again in case this fired
* at the same time the event timer did.
*/
tcpip_poll_udp(resolv_conn);
} else
2013-03-13 15:14:29 +00:00
#endif /* RESOLV_CONF_SUPPORTS_MDNS */
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
{
check_entries();
}
}
}
}
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
#if RESOLV_CONF_SUPPORTS_MDNS
if(mdns_needs_host_announce) {
tcpip_poll_udp(resolv_conn);
}
2013-03-13 15:14:29 +00:00
#endif /* RESOLV_CONF_SUPPORTS_MDNS */
}
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
PROCESS_END();
}
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
/*---------------------------------------------------------------------------*/
static void
init(void)
{
static uint8_t initialized = 0;
if(!initialized) {
process_start(&resolv_process, NULL);
initialized = 1;
}
}
/*---------------------------------------------------------------------------*/
#if RESOLV_AUTO_REMOVE_TRAILING_DOTS
static const char *
remove_trailing_dots(const char *name) {
static char dns_name_without_dots[RESOLV_CONF_MAX_DOMAIN_NAME_SIZE + 1];
size_t len = strlen(name);
2017-04-11 13:27:55 +00:00
if(len && name[len - 1] == '.') {
strncpy(dns_name_without_dots, name, RESOLV_CONF_MAX_DOMAIN_NAME_SIZE);
while(len && (dns_name_without_dots[len - 1] == '.')) {
dns_name_without_dots[--len] = 0;
}
name = dns_name_without_dots;
}
return name;
}
#else /* RESOLV_AUTO_REMOVE_TRAILING_DOTS */
#define remove_trailing_dots(x) (x)
#endif /* RESOLV_AUTO_REMOVE_TRAILING_DOTS */
/*---------------------------------------------------------------------------*/
/**
* Queues a name so that a question for the name will be sent out.
*
* \param name The hostname that is to be queried.
*/
void
resolv_query(const char *name)
{
uint8_t i;
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
uint8_t lseq, lseqi;
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
register struct namemap *nameptr = 0;
init();
2017-06-16 15:02:42 +00:00
lseq = lseqi = 0;
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
2013-03-13 15:14:29 +00:00
/* Remove trailing dots, if present. */
name = remove_trailing_dots(name);
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
for(i = 0; i < RESOLV_ENTRIES; ++i) {
nameptr = &names[i];
if(0 == strcasecmp(nameptr->name, name)) {
break;
}
if((nameptr->state == STATE_UNUSED)
#if RESOLV_SUPPORTS_RECORD_EXPIRATION
|| (nameptr->state == STATE_DONE && clock_seconds() > nameptr->expiration)
#endif /* RESOLV_SUPPORTS_RECORD_EXPIRATION */
) {
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
lseqi = i;
lseq = 255;
} else if(seqno - nameptr->seqno > lseq) {
lseq = seqno - nameptr->seqno;
lseqi = i;
}
}
if(i == RESOLV_ENTRIES) {
i = lseqi;
nameptr = &names[i];
}
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
PRINTF("resolver: Starting query for \"%s\".\n", name);
memset(nameptr, 0, sizeof(*nameptr));
2017-04-11 13:27:55 +00:00
strncpy(nameptr->name, name, sizeof(nameptr->name) - 1);
nameptr->state = STATE_NEW;
nameptr->seqno = seqno;
++seqno;
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
#if RESOLV_CONF_SUPPORTS_MDNS
{
size_t name_len = strlen(name);
const char local_suffix[] = "local";
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
2013-03-13 15:14:29 +00:00
if((name_len > (sizeof(local_suffix) - 1)) &&
(0 == strcasecmp(name + name_len - (sizeof(local_suffix) - 1), local_suffix))) {
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
PRINTF("resolver: Using MDNS to look up \"%s\".\n", name);
nameptr->is_mdns = 1;
} else {
nameptr->is_mdns = 0;
}
}
2013-03-13 15:14:29 +00:00
nameptr->is_probe = (mdns_state == MDNS_STATE_PROBING) &&
(0 == strcmp(nameptr->name, resolv_hostname));
2013-03-13 15:14:29 +00:00
#endif /* RESOLV_CONF_SUPPORTS_MDNS */
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
/* Force check_entires() to run on our process. */
process_post(&resolv_process, PROCESS_EVENT_TIMER, 0);
}
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
/*---------------------------------------------------------------------------*/
/**
* Look up a hostname in the array of known hostnames.
*
* \note This function only looks in the internal array of known
* hostnames, it does not send out a query for the hostname if none
* was found. The function resolv_query() can be used to send a query
* for a hostname.
*
*/
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
resolv_status_t
resolv_lookup(const char *name, uip_ipaddr_t ** ipaddr)
{
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
resolv_status_t ret = RESOLV_STATUS_UNCACHED;
uint8_t i;
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
struct namemap *nameptr;
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
2013-03-13 15:14:29 +00:00
/* Remove trailing dots, if present. */
name = remove_trailing_dots(name);
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
#if UIP_CONF_LOOPBACK_INTERFACE
if(strcmp(name, "localhost")) {
static uip_ipaddr_t loopback =
{ { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01 } };
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
if(ipaddr) {
*ipaddr = &loopback;
}
ret = RESOLV_STATUS_CACHED;
}
2013-03-13 15:14:29 +00:00
#endif /* UIP_CONF_LOOPBACK_INTERFACE */
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
/* Walk through the list to see if the name is in there. */
for(i = 0; i < RESOLV_ENTRIES; ++i) {
nameptr = &names[i];
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
if(strcasecmp(name, nameptr->name) == 0) {
switch (nameptr->state) {
case STATE_DONE:
ret = RESOLV_STATUS_CACHED;
#if RESOLV_SUPPORTS_RECORD_EXPIRATION
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
if(clock_seconds() > nameptr->expiration) {
ret = RESOLV_STATUS_EXPIRED;
}
#endif /* RESOLV_SUPPORTS_RECORD_EXPIRATION */
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
break;
case STATE_NEW:
case STATE_ASKING:
ret = RESOLV_STATUS_RESOLVING;
break;
2013-03-13 15:14:29 +00:00
/* Almost certainly a not-found error from server */
case STATE_ERROR:
ret = RESOLV_STATUS_NOT_FOUND;
#if RESOLV_SUPPORTS_RECORD_EXPIRATION
if(clock_seconds() > nameptr->expiration) {
ret = RESOLV_STATUS_UNCACHED;
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
}
#endif /* RESOLV_SUPPORTS_RECORD_EXPIRATION */
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
break;
}
if(ipaddr) {
*ipaddr = &nameptr->ipaddr;
}
/* Break out of for loop. */
break;
}
}
#if VERBOSE_DEBUG
switch (ret) {
case RESOLV_STATUS_CACHED:
if(ipaddr) {
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
PRINTF("resolver: Found \"%s\" in cache.\n", name);
const uip_ipaddr_t *addr = *ipaddr;
DEBUG_PRINTF
("resolver: %02x%02x:%02x%02x:%02x%02x:%02x%02x:%02x%02x:%02x%02x:%02x%02x:%02x%02x \n",
((uint8_t *) addr)[0], ((uint8_t *) addr)[1], ((uint8_t *) addr)[2],
((uint8_t *) addr)[3], ((uint8_t *) addr)[4], ((uint8_t *) addr)[5],
((uint8_t *) addr)[6], ((uint8_t *) addr)[7], ((uint8_t *) addr)[8],
((uint8_t *) addr)[9], ((uint8_t *) addr)[10],
((uint8_t *) addr)[11], ((uint8_t *) addr)[12],
((uint8_t *) addr)[13], ((uint8_t *) addr)[14],
((uint8_t *) addr)[15]);
break;
}
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
default:
DEBUG_PRINTF("resolver: \"%s\" is NOT cached.\n", name);
break;
}
2013-03-13 15:14:29 +00:00
#endif /* VERBOSE_DEBUG */
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
return ret;
}
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
/*---------------------------------------------------------------------------*/
/** \internal
* Callback function which is called when a hostname is found.
*
*/
static void
resolv_found(char *name, uip_ipaddr_t * ipaddr)
{
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
#if RESOLV_CONF_SUPPORTS_MDNS
if(strncasecmp(resolv_hostname, name, strlen(resolv_hostname)) == 0 &&
ipaddr
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
&& !uip_ds6_is_my_addr(ipaddr)
) {
uint8_t i;
if(mdns_state == MDNS_STATE_PROBING) {
/* We found this new name while probing.
* We must now rename ourselves.
*/
PRINTF("resolver: Name collision detected for \"%s\".\n", name);
/* Remove the ".local" suffix. */
resolv_hostname[strlen(resolv_hostname) - 6] = 0;
/* Append the last three hex parts of the link-level address. */
for(i = 0; i < 3; ++i) {
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
uint8_t val = uip_lladdr.addr[(UIP_LLADDR_LEN - 3) + i];
char append_str[4] = "-XX";
append_str[2] = (((val & 0xF) > 9) ? 'a' : '0') + (val & 0xF);
val >>= 4;
append_str[1] = (((val & 0xF) > 9) ? 'a' : '0') + (val & 0xF);
strncat(resolv_hostname, append_str,
sizeof(resolv_hostname) - strlen(resolv_hostname) - 1); /* -1 in order to fit the terminating null byte. */
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
}
/* Re-add the .local suffix */
2017-04-11 13:27:55 +00:00
strncat(resolv_hostname, ".local", RESOLV_CONF_MAX_DOMAIN_NAME_SIZE - strlen(resolv_hostname));
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
start_name_collision_check(CLOCK_SECOND * 5);
} else if(mdns_state == MDNS_STATE_READY) {
/* We found a collision after we had already asserted
* that we owned this name. We need to immediately
* and explicitly begin probing.
*/
PRINTF("resolver: Possible name collision, probing...\n");
start_name_collision_check(0);
}
} else
2013-03-13 15:14:29 +00:00
#endif /* RESOLV_CONF_SUPPORTS_MDNS */
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
#if VERBOSE_DEBUG
if(ipaddr) {
PRINTF("resolver: Found address for \"%s\".\n", name);
PRINTF
("resolver: %02x%02x:%02x%02x:%02x%02x:%02x%02x:%02x%02x:%02x%02x:%02x%02x:%02x%02x \n",
((uint8_t *) ipaddr)[0], ((uint8_t *) ipaddr)[1],
((uint8_t *) ipaddr)[2], ((uint8_t *) ipaddr)[3],
((uint8_t *) ipaddr)[4], ((uint8_t *) ipaddr)[5],
((uint8_t *) ipaddr)[6], ((uint8_t *) ipaddr)[7],
((uint8_t *) ipaddr)[8], ((uint8_t *) ipaddr)[9],
((uint8_t *) ipaddr)[10], ((uint8_t *) ipaddr)[11],
((uint8_t *) ipaddr)[12], ((uint8_t *) ipaddr)[13],
((uint8_t *) ipaddr)[14], ((uint8_t *) ipaddr)[15]);
} else {
PRINTF("resolver: Unable to retrieve address for \"%s\".\n", name);
}
2013-03-13 15:14:29 +00:00
#endif /* VERBOSE_DEBUG */
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
process_post(PROCESS_BROADCAST, resolv_event_found, name);
}
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor. This patch updates the DNS resolver to support IPv6 and introduces an improved API for looking up DNS entries. This patch also adds optional support for mDNS lookups and responses to the DNS resolver. Here is a quick summary of the changes: * Added support for IPv6 lookups. * DNS queries now honor record expiration. * Added support for mDNS, compatible with "Bonjour". * Implemented a new lookup api, `resolv_lookup2()`, which provides more information about the state of the record(error, expired, looking-up, etc.). About mDNS/Bonjour Support -------------------------- This patch adds basic support for mDNS/Bonjour, which allows you to refer to the name of a device instead of its IP address. This is incredibly convenient for IPv6 addresses because they tend to be very long and difficult to remember. It is especially important for link-local IPv6 addresses, since not all programs support the '%' notation for indicating a network interface (required on systems with more than one network interface to disambiguate). In other words, instead of typing in this: * `http://[fe80::58dc:d7ed:a644:628f%en1]/` You can type this instead: * `http://contiki.local/` Huge improvement, no? The convenience extends beyond that: this mechanism can be used for nodes to talk to each other based on their human-readable names instead of their IPv6 addresses. So instead of a switch on `aaaa::58dc:d7ed:a644:628f` triggering an actuator on `aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the actuator on `living-room-lights.local`. What you need to do to be able to look up `.local` names on your workstation depends on a few factors: * Your machine needs to be able to send and receive multicast packets to and from the LoWPAN. You can do this easily with the Jackdaw firmware on an RZUSBStick. If you have a border router, you will need it to bridge the mDNS multicast packets across the border. * If you are using a Mac, you win. All Apple devices support mDNS lookups. * If you are using Windows, you can install Apple's Bonjour for Windows package. (This may be already installed on your machine if you have installed iTunes) After you install this you can easily do `.local` lookups. * If you are using a Unix machine, you can install Avahi. The default hostname is set to `contiki.local.`. You can change the hostname programmatically by calling `resolv_set_hostname()`. You can change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`. You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to `0`. --------------------------------- core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()` Note that this patch should fix several `resolv_lookup()` bugs that already existed. There were many cases where `resolv_lookup()` was being called and the IP address ignored, but later code assumed that the IP address had been fetched... ANYWAY, those should be fixed now. --------------------------------- examples/udp-ipv6: Updated client to use MDNS to lookup the server. Also updated the Cooja regression test simulation.
2012-05-17 15:24:08 +00:00
/*---------------------------------------------------------------------------*/
#endif /* UIP_UDP */
/** @} */
/** @} */