331 lines
9.7 KiB
C
331 lines
9.7 KiB
C
|
/*
|
||
|
|
* Copyright (c) 2017, George Oikonomou - http://www.spd.gr
|
||
|
|
* All rights reserved.
|
||
|
|
*
|
||
|
|
* Redistribution and use in source and binary forms, with or without
|
||
|
|
* modification, are permitted provided that the following conditions
|
||
|
|
* are met:
|
||
|
|
*
|
||
|
|
* 1. Redistributions of source code must retain the above copyright
|
||
|
|
* notice, this list of conditions and the following disclaimer.
|
||
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
||
|
|
* notice, this list of conditions and the following disclaimer in the
|
||
|
|
* documentation and/or other materials provided with the distribution.
|
||
|
|
* 3. Neither the name of the copyright holder nor the names of its
|
||
|
|
* contributors may be used to endorse or promote products derived
|
||
|
|
* from this software without specific prior written permission.
|
||
|
|
*
|
||
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||
|
|
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||
|
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||
|
|
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||
|
|
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||
|
|
*/
|
||
|
|
/*---------------------------------------------------------------------------*/
|
||
|
|
/**
|
||
|
|
* \addtogroup cc2538
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
/*---------------------------------------------------------------------------*/
|
||
|
|
#ifndef CC2538_CONF_H_
|
||
|
|
#define CC2538_CONF_H_
|
||
|
|
/*---------------------------------------------------------------------------*/
|
||
|
|
/**
|
||
|
|
* \name CFS configuration
|
||
|
|
*
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#ifndef COFFEE_CONF_SIZE
|
||
|
|
#define COFFEE_CONF_SIZE (4 * COFFEE_SECTOR_SIZE)
|
||
|
|
#endif
|
||
|
|
/** @} */
|
||
|
|
/*---------------------------------------------------------------------------*/
|
||
|
|
/**
|
||
|
|
* \name CC2538 System Control configuration
|
||
|
|
*
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#ifndef SYS_CTRL_CONF_OSC32K_USE_XTAL
|
||
|
|
#define SYS_CTRL_CONF_OSC32K_USE_XTAL 0 /**< Use the on-board 32.768-kHz crystal */
|
||
|
|
#endif
|
||
|
|
/** @} */
|
||
|
|
/*---------------------------------------------------------------------------*/
|
||
|
|
/**
|
||
|
|
* \name Watchdog Timer configuration
|
||
|
|
*
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#ifndef WATCHDOG_CONF_ENABLE
|
||
|
|
#define WATCHDOG_CONF_ENABLE 1 /**< Enable the watchdog timer */
|
||
|
|
#endif
|
||
|
|
/** @} */
|
||
|
|
/*---------------------------------------------------------------------------*/
|
||
|
|
/**
|
||
|
|
* \name USB 'core' configuration
|
||
|
|
*
|
||
|
|
* Those values are not meant to be modified by the user, except where stated
|
||
|
|
* otherwise
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#define CTRL_EP_SIZE 8
|
||
|
|
#define USB_EP1_SIZE 32
|
||
|
|
#define USB_EP2_SIZE 64
|
||
|
|
#define USB_EP3_SIZE 64
|
||
|
|
#define USB_ARCH_WRITE_NOTIFY 0
|
||
|
|
|
||
|
|
#ifndef USB_ARCH_CONF_DMA
|
||
|
|
#define USB_ARCH_CONF_DMA 1 /**< Change to Enable/Disable USB DMA */
|
||
|
|
|
||
|
|
#endif
|
||
|
|
/** @} */
|
||
|
|
/**
|
||
|
|
* \name uDMA Configuration and channel allocations
|
||
|
|
*
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#define USB_ARCH_CONF_RX_DMA_CHAN 0 /**< USB -> RAM DMA channel */
|
||
|
|
#define USB_ARCH_CONF_TX_DMA_CHAN 1 /**< RAM -> USB DMA channel */
|
||
|
|
#define CC2538_RF_CONF_TX_DMA_CHAN 2 /**< RF -> RAM DMA channel */
|
||
|
|
#define CC2538_RF_CONF_RX_DMA_CHAN 3 /**< RAM -> RF DMA channel */
|
||
|
|
#define UDMA_CONF_MAX_CHANNEL CC2538_RF_CONF_RX_DMA_CHAN
|
||
|
|
/** @} */
|
||
|
|
/*---------------------------------------------------------------------------*/
|
||
|
|
/**
|
||
|
|
* \name Character I/O Configuration
|
||
|
|
*
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#ifndef UART_CONF_ENABLE
|
||
|
|
#define UART_CONF_ENABLE 1 /**< Enable/Disable UART I/O */
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#ifndef UART0_CONF_BAUD_RATE
|
||
|
|
#define UART0_CONF_BAUD_RATE 115200 /**< Default UART0 baud rate */
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#ifndef UART1_CONF_BAUD_RATE
|
||
|
|
#define UART1_CONF_BAUD_RATE 115200 /**< Default UART1 baud rate */
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#ifndef SLIP_ARCH_CONF_USB
|
||
|
|
#define SLIP_ARCH_CONF_USB 0 /**< SLIP over UART by default */
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#ifndef DBG_CONF_USB
|
||
|
|
#define DBG_CONF_USB 0 /**< All debugging over UART by default */
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#ifndef SERIAL_LINE_CONF_UART
|
||
|
|
#define SERIAL_LINE_CONF_UART 0 /**< UART to use with serial line */
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#if !SLIP_ARCH_CONF_USB
|
||
|
|
#ifndef SLIP_ARCH_CONF_UART
|
||
|
|
#define SLIP_ARCH_CONF_UART 0 /**< UART to use with SLIP */
|
||
|
|
#endif
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#if !DBG_CONF_USB
|
||
|
|
#ifndef DBG_CONF_UART
|
||
|
|
#define DBG_CONF_UART 0 /**< UART to use for debugging */
|
||
|
|
#endif
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#ifndef UART1_CONF_UART
|
||
|
|
#define UART1_CONF_UART 0 /**< UART to use for examples relying on
|
||
|
|
the uart1_* API */
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#ifndef SLIP_ARCH_CONF_ENABLED
|
||
|
|
/*
|
||
|
|
* Determine whether we need SLIP
|
||
|
|
* This will keep working while UIP_FALLBACK_INTERFACE and CMD_CONF_OUTPUT
|
||
|
|
* keep using SLIP
|
||
|
|
*/
|
||
|
|
#if defined(UIP_FALLBACK_INTERFACE) || defined(CMD_CONF_OUTPUT)
|
||
|
|
#define SLIP_ARCH_CONF_ENABLED 1
|
||
|
|
#endif
|
||
|
|
#endif
|
||
|
|
|
||
|
|
/**
|
||
|
|
* \brief Define this as 1 to build a headless node.
|
||
|
|
*
|
||
|
|
* The UART will not be initialised its clock will be gated, offering some
|
||
|
|
* energy savings. The USB will not be initialised either
|
||
|
|
*/
|
||
|
|
#ifndef CC2538_CONF_QUIET
|
||
|
|
#define CC2538_CONF_QUIET 0
|
||
|
|
#endif
|
||
|
|
|
||
|
|
/* CC2538_CONF_QUIET is hard and overrides all other related defines */
|
||
|
|
#if CC2538_CONF_QUIET
|
||
|
|
#undef USB_SERIAL_CONF_ENABLE
|
||
|
|
#define USB_SERIAL_CONF_ENABLE 0
|
||
|
|
|
||
|
|
#undef UART_CONF_ENABLE
|
||
|
|
#define UART_CONF_ENABLE 0
|
||
|
|
#endif /* CC2538_CONF_QUIET */
|
||
|
|
|
||
|
|
/**
|
||
|
|
* \brief Enable the USB core only if we need it
|
||
|
|
*/
|
||
|
|
#ifndef USB_SERIAL_CONF_ENABLE
|
||
|
|
#define USB_SERIAL_CONF_ENABLE \
|
||
|
|
((SLIP_ARCH_CONF_USB && SLIP_ARCH_CONF_ENABLED) || \
|
||
|
|
(MAC_CONF_WITH_TSCH && (SLIP_ARCH_CONF_ENABLED || BUILD_WITH_SHELL)) || \
|
||
|
|
DBG_CONF_USB)
|
||
|
|
#endif
|
||
|
|
|
||
|
|
/*
|
||
|
|
* If debugging and SLIP use the same peripheral, this will be 1. Don't modify
|
||
|
|
* this
|
||
|
|
*/
|
||
|
|
#if SLIP_ARCH_CONF_ENABLED
|
||
|
|
#define DBG_CONF_SLIP_MUX (SLIP_ARCH_CONF_USB == DBG_CONF_USB && \
|
||
|
|
(SLIP_ARCH_CONF_USB || \
|
||
|
|
SLIP_ARCH_CONF_UART == DBG_CONF_UART))
|
||
|
|
#endif
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Automatic detection of whether a specific UART is in use
|
||
|
|
*/
|
||
|
|
#define UART_IN_USE_BY_SERIAL_LINE(u) (SERIAL_LINE_CONF_UART == (u))
|
||
|
|
#define UART_IN_USE_BY_SLIP(u) (SLIP_ARCH_CONF_ENABLED && \
|
||
|
|
!SLIP_ARCH_CONF_USB && \
|
||
|
|
SLIP_ARCH_CONF_UART == (u))
|
||
|
|
#define UART_IN_USE_BY_DBG(u) (!DBG_CONF_USB && DBG_CONF_UART == (u))
|
||
|
|
#define UART_IN_USE_BY_UART1(u) (UART1_CONF_UART == (u))
|
||
|
|
|
||
|
|
#define UART_IN_USE(u) ( \
|
||
|
|
UART_CONF_ENABLE && \
|
||
|
|
(UART_IN_USE_BY_SERIAL_LINE(u) || \
|
||
|
|
UART_IN_USE_BY_SLIP(u) || \
|
||
|
|
UART_IN_USE_BY_DBG(u) || \
|
||
|
|
UART_IN_USE_BY_UART1(u)) \
|
||
|
|
)
|
||
|
|
/** @} */
|
||
|
|
/*---------------------------------------------------------------------------*/
|
||
|
|
/**
|
||
|
|
* \name RF configuration
|
||
|
|
*
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
/* RF Config */
|
||
|
|
|
||
|
|
#ifdef RF_CHANNEL
|
||
|
|
#define CC2538_RF_CONF_CHANNEL RF_CHANNEL
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#ifndef CC2538_RF_CONF_CHANNEL
|
||
|
|
#define CC2538_RF_CONF_CHANNEL 26
|
||
|
|
#endif /* CC2538_RF_CONF_CHANNEL */
|
||
|
|
|
||
|
|
#ifndef CC2538_RF_CONF_AUTOACK
|
||
|
|
#define CC2538_RF_CONF_AUTOACK 1 /**< RF H/W generates ACKs */
|
||
|
|
#endif /* CC2538_CONF_AUTOACK */
|
||
|
|
|
||
|
|
#ifndef CC2538_RF_CONF_TX_USE_DMA
|
||
|
|
#define CC2538_RF_CONF_TX_USE_DMA 1 /**< RF TX over DMA */
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#ifndef CC2538_RF_CONF_RX_USE_DMA
|
||
|
|
#define CC2538_RF_CONF_RX_USE_DMA 1 /**< RF RX over DMA */
|
||
|
|
#endif
|
||
|
|
/** @} */
|
||
|
|
/*---------------------------------------------------------------------------*/
|
||
|
|
/**
|
||
|
|
* \name LPM configuration
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#ifndef LPM_CONF_ENABLE
|
||
|
|
#define LPM_CONF_ENABLE 1 /**< Set to 0 to disable LPM entirely */
|
||
|
|
#endif
|
||
|
|
|
||
|
|
/**
|
||
|
|
* \brief Maximum PM
|
||
|
|
*
|
||
|
|
* The SoC will never drop to a Power Mode deeper than the one specified here.
|
||
|
|
* 0 for PM0, 1 for PM1 and 2 for PM2
|
||
|
|
*/
|
||
|
|
#ifndef LPM_CONF_MAX_PM
|
||
|
|
#define LPM_CONF_MAX_PM 1
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#ifndef LPM_CONF_STATS
|
||
|
|
#define LPM_CONF_STATS 0 /**< Set to 1 to enable LPM-related stats */
|
||
|
|
#endif
|
||
|
|
/** @} */
|
||
|
|
/*---------------------------------------------------------------------------*/
|
||
|
|
/**
|
||
|
|
* \name Radio Configuration
|
||
|
|
*
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#ifndef NETSTACK_CONF_RADIO
|
||
|
|
#define NETSTACK_CONF_RADIO cc2538_rf_driver
|
||
|
|
#endif
|
||
|
|
/** @} */
|
||
|
|
/*---------------------------------------------------------------------------*/
|
||
|
|
/**
|
||
|
|
* \name IEEE address configuration
|
||
|
|
*
|
||
|
|
* Used to generate our link-layer & IPv6 address
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
/**
|
||
|
|
* \brief Location of the IEEE address
|
||
|
|
* 0 => Read from InfoPage,
|
||
|
|
* 1 => Use a hardcoded address, configured by IEEE_ADDR_CONF_ADDRESS
|
||
|
|
*/
|
||
|
|
#ifndef IEEE_ADDR_CONF_HARDCODED
|
||
|
|
#define IEEE_ADDR_CONF_HARDCODED 0
|
||
|
|
#endif
|
||
|
|
|
||
|
|
/**
|
||
|
|
* \brief The hardcoded IEEE address to be used when IEEE_ADDR_CONF_HARDCODED
|
||
|
|
* is defined as 1
|
||
|
|
*/
|
||
|
|
#ifndef IEEE_ADDR_CONF_ADDRESS
|
||
|
|
#define IEEE_ADDR_CONF_ADDRESS { 0x00, 0x12, 0x4B, 0x00, 0x89, 0xAB, 0xCD, 0xEF }
|
||
|
|
#endif
|
||
|
|
|
||
|
|
/**
|
||
|
|
* \brief Location of the IEEE address in the InfoPage when
|
||
|
|
* IEEE_ADDR_CONF_HARDCODED is defined as 0
|
||
|
|
* 0 => Use the primary address location
|
||
|
|
* 1 => Use the secondary address location
|
||
|
|
*/
|
||
|
|
#ifndef IEEE_ADDR_CONF_USE_SECONDARY_LOCATION
|
||
|
|
#define IEEE_ADDR_CONF_USE_SECONDARY_LOCATION 0
|
||
|
|
#endif
|
||
|
|
/** @} */
|
||
|
|
/*---------------------------------------------------------------------------*/
|
||
|
|
/**
|
||
|
|
* \name Security
|
||
|
|
*
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#ifndef CRYPTO_CONF_INIT
|
||
|
|
#define CRYPTO_CONF_INIT 1 /**< Whether to init cryptoprocessor */
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#ifndef AES_128_CONF
|
||
|
|
#define AES_128_CONF cc2538_aes_128_driver /**< AES-128 driver */
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#ifndef CCM_STAR_CONF
|
||
|
|
#define CCM_STAR_CONF cc2538_ccm_star_driver /**< AES-CCM* driver */
|
||
|
|
#endif
|
||
|
|
/** @} */
|
||
|
|
/*---------------------------------------------------------------------------*/
|
||
|
|
#endif /* CC2538_CONF_H_ */
|
||
|
|
/*---------------------------------------------------------------------------*/
|
||
|
|
/** @} */
|