Merge branch 'develop' into contrib/readme

arch/platform/zoul/dev/ac-dimmer.c

@@ -40,6 +40,7 @@
 #include "contiki.h"
 #include "ac-dimmer.h"
 #include "dev/gpio.h"
+#include "dev/gpio-hal.h"
 #include "lib/sensors.h"
 #include "dev/ioc.h"
 /*---------------------------------------------------------------------------*/
@@ -76,13 +77,17 @@ PROCESS_THREAD(ac_dimmer_int_process, ev, data)
 }
 /*---------------------------------------------------------------------------*/
 static void
-dimmer_zero_cross_int_handler(uint8_t port, uint8_t pin)
+dimmer_zero_cross_int_handler(gpio_hal_pin_mask_t pin_mask)
 {
-  if((port == DIMMER_SYNC_PORT) && (pin == DIMMER_SYNC_PIN)) {
   process_poll(&ac_dimmer_int_process);
-  }
 }
 /*---------------------------------------------------------------------------*/
+static gpio_hal_event_handler_t dimmer_handler = {
+  .next = NULL,
+  .handler = dimmer_zero_cross_int_handler,
+  .pin_mask = gpio_hal_pin_to_mask(DIMMER_SYNC_PIN) << (DIMMER_SYNC_PORT << 3),
+};
+/*---------------------------------------------------------------------------*/
 static int
 status(int type)
 {
@@ -128,8 +133,7 @@ configure(int type, int value)
     GPIO_DETECT_EDGE(DIMMER_SYNC_PORT_BASE, DIMMER_SYNC_PIN_MASK);
     GPIO_TRIGGER_SINGLE_EDGE(DIMMER_SYNC_PORT_BASE, DIMMER_SYNC_PIN_MASK);
     GPIO_DETECT_RISING(DIMMER_SYNC_PORT_BASE, DIMMER_SYNC_PIN_MASK);
-    gpio_register_callback(dimmer_zero_cross_int_handler, DIMMER_SYNC_PORT,
+    gpio_hal_register_handler(&dimmer_handler);
-                           DIMMER_SYNC_PIN);
 
     /* Spin process until an interrupt is received */
     process_start(&ac_dimmer_int_process, NULL);

arch/platform/zoul/dev/grove-gyro.c

@@ -44,6 +44,7 @@
 #include "contiki.h"
 #include "dev/i2c.h"
 #include "dev/grove-gyro.h"
+#include "dev/gpio-hal.h"
 #include "lib/sensors.h"
 #include "dev/watchdog.h"
 /*---------------------------------------------------------------------------*/
@@ -458,11 +459,17 @@ PROCESS_THREAD(grove_gyro_int_process, ev, data)
 }
 /*---------------------------------------------------------------------------*/
 static void
-grove_gyro_interrupt_handler(uint8_t port, uint8_t pin)
+grove_gyro_interrupt_handler(gpio_hal_pin_mask_t pin_mask)
 {
   process_poll(&grove_gyro_int_process);
 }
 /*---------------------------------------------------------------------------*/
+static gpio_hal_event_handler_t gyro_handler = {
+  .next = NULL,
+  .handler = grove_gyro_interrupt_handler,
+  .pin_mask = gpio_hal_pin_to_mask(I2C_INT_PIN) << (I2C_INT_PORT << 3),
+};
+/*---------------------------------------------------------------------------*/
 static int
 value(int type)
 {
@@ -593,8 +600,7 @@ configure(int type, int value)
     GPIO_DETECT_EDGE(GROVE_GYRO_INT_PORT_BASE, GROVE_GYRO_INT_PIN_MASK);
     GPIO_TRIGGER_SINGLE_EDGE(GROVE_GYRO_INT_PORT_BASE, GROVE_GYRO_INT_PIN_MASK);
     GPIO_DETECT_FALLING(GROVE_GYRO_INT_PORT_BASE, GROVE_GYRO_INT_PIN_MASK);
-    gpio_register_callback(grove_gyro_interrupt_handler, I2C_INT_PORT,
+    gpio_hal_register_handler(&gyro_handler);
-                           I2C_INT_PIN);
 
     /* Spin process until an interrupt is received */
     process_start(&grove_gyro_int_process, NULL);

arch/platform/zoul/dev/motion-sensor.c

@@ -47,6 +47,7 @@
 #include "lib/sensors.h"
 #include "dev/sys-ctrl.h"
 #include "dev/gpio.h"
+#include "dev/gpio-hal.h"
 #include "dev/ioc.h"
 /*---------------------------------------------------------------------------*/
 #define DEBUG 0
@@ -76,11 +77,17 @@ PROCESS_THREAD(motion_int_process, ev, data)
 }
 /*---------------------------------------------------------------------------*/
 static void
-motion_interrupt_handler(uint8_t port, uint8_t pin)
+motion_interrupt_handler(gpio_hal_pin_mask_t pin_mask)
 {
   process_poll(&motion_int_process);
 }
 /*---------------------------------------------------------------------------*/
+static gpio_hal_event_handler_t motion_handler = {
+  .next = NULL,
+  .handler = motion_interrupt_handler,
+  .pin_mask = gpio_hal_pin_to_mask(MOTION_SENSOR_PIN) << (MOTION_SENSOR_PORT << 3),
+};
+/*---------------------------------------------------------------------------*/
 static int
 status(int type)
 {
@@ -113,8 +120,7 @@ configure(int type, int value)
   GPIO_DETECT_RISING(MOTION_SENSOR_PORT_BASE, MOTION_SENSOR_PIN_MASK);
   GPIO_TRIGGER_SINGLE_EDGE(MOTION_SENSOR_PORT_BASE, MOTION_SENSOR_PIN_MASK);
   ioc_set_over(MOTION_SENSOR_PORT, MOTION_SENSOR_PIN, IOC_OVERRIDE_DIS);
-  gpio_register_callback(motion_interrupt_handler, MOTION_SENSOR_PORT,
+  gpio_hal_register_handler(&motion_handler);
-                         MOTION_SENSOR_PIN);
 
   process_start(&motion_int_process, NULL);
 

arch/platform/zoul/dev/tsl256x.c

@@ -43,6 +43,7 @@
 #include "contiki.h"
 #include "dev/i2c.h"
 #include "dev/gpio.h"
+#include "dev/gpio-hal.h"
 #include "dev/zoul-sensors.h"
 #include "lib/sensors.h"
 #include "tsl256x.h"
@@ -255,7 +256,7 @@ PROCESS_THREAD(tsl256x_int_process, ev, data)
 }
 /*---------------------------------------------------------------------------*/
 static void
-tsl256x_interrupt_handler(uint8_t port, uint8_t pin)
+tsl256x_interrupt_handler(gpio_hal_pin_mask_t pin_mask)
 {
   /* There's no alert/interruption flag to check, clear the interruption by
    * writting to the CLEAR bit in the COMMAND register
@@ -263,6 +264,12 @@ tsl256x_interrupt_handler(uint8_t port, uint8_t pin)
   process_poll(&tsl256x_int_process);
 }
 /*---------------------------------------------------------------------------*/
+static gpio_hal_event_handler_t tsl256x_handler = {
+  .next = NULL,
+  .handler = tsl256x_interrupt_handler,
+  .pin_mask = gpio_hal_pin_to_mask(I2C_INT_PIN) << (I2C_INT_PORT << 3),
+};
+/*---------------------------------------------------------------------------*/
 static int
 configure(int type, int value)
 {
@@ -440,7 +447,7 @@ configure(int type, int value)
   GPIO_DETECT_EDGE(TSL256X_INT_PORT_BASE, TSL256X_INT_PIN_MASK);
   GPIO_TRIGGER_SINGLE_EDGE(TSL256X_INT_PORT_BASE, TSL256X_INT_PIN_MASK);
   GPIO_DETECT_FALLING(TSL256X_INT_PORT_BASE, TSL256X_INT_PIN_MASK);
-  gpio_register_callback(tsl256x_interrupt_handler, I2C_INT_PORT, I2C_INT_PIN);
+  gpio_hal_register_handler(&tsl256x_handler);
 
   /* Spin process until an interrupt is received */
   process_start(&tsl256x_int_process, NULL);

arch/platform/zoul/dev/weather-meter.c

@@ -51,6 +51,7 @@
 #include "lib/sensors.h"
 #include "dev/sys-ctrl.h"
 #include "dev/gpio.h"
+#include "dev/gpio-hal.h"
 #include "dev/ioc.h"
 #include "sys/timer.h"
 #include "sys/ctimer.h"
@@ -292,8 +293,22 @@ PROCESS_THREAD(weather_meter_int_process, ev, data)
   PROCESS_END();
 }
 /*---------------------------------------------------------------------------*/
+static void weather_meter_interrupt_handler(gpio_hal_pin_mask_t pin_mask);
+/*---------------------------------------------------------------------------*/
+static gpio_hal_event_handler_t rain_handler = {
+  .next = NULL,
+  .handler = weather_meter_interrupt_handler,
+  .pin_mask = gpio_hal_pin_to_mask(RAIN_GAUGE_SENSOR_PIN) << (RAIN_GAUGE_SENSOR_PORT << 3),
+};
+/*---------------------------------------------------------------------------*/
+static gpio_hal_event_handler_t anemometer_handler = {
+  .next = NULL,
+  .handler = weather_meter_interrupt_handler,
+  .pin_mask = gpio_hal_pin_to_mask(ANEMOMETER_SENSOR_PIN) << (ANEMOMETER_SENSOR_PORT << 3),
+};
+/*---------------------------------------------------------------------------*/
 static void
-weather_meter_interrupt_handler(uint8_t port, uint8_t pin)
+weather_meter_interrupt_handler(gpio_hal_pin_mask_t pin_mask)
 {
   uint32_t aux;
 
@@ -308,10 +323,10 @@ weather_meter_interrupt_handler(uint8_t port, uint8_t pin)
    * value
    */
 
-  if((port == ANEMOMETER_SENSOR_PORT) && (pin == ANEMOMETER_SENSOR_PIN)) {
+  if(pin_mask == rain_handler.pin_mask) {
     weather_sensors.anemometer.ticks++;
     process_post(&weather_meter_int_process, anemometer_int_event, NULL);
-  } else if((port == RAIN_GAUGE_SENSOR_PORT) && (pin == RAIN_GAUGE_SENSOR_PIN)) {
+  } else if(pin_mask == anemometer_handler.pin_mask) {
     weather_sensors.rain_gauge.ticks++;
     aux = weather_sensors.rain_gauge.ticks * WEATHER_METER_AUX_RAIN_MM;
     aux /= 1000;
@@ -427,8 +442,7 @@ configure(int type, int value)
     GPIO_TRIGGER_SINGLE_EDGE(ANEMOMETER_SENSOR_PORT_BASE,
                              ANEMOMETER_SENSOR_PIN_MASK);
     ioc_set_over(ANEMOMETER_SENSOR_PORT, ANEMOMETER_SENSOR_PIN, IOC_OVERRIDE_DIS);
-    gpio_register_callback(weather_meter_interrupt_handler, ANEMOMETER_SENSOR_PORT,
+    gpio_hal_register_handler(&anemometer_handler);
-                           ANEMOMETER_SENSOR_PIN);
 
     /* Configure rain gauge interruption */
     GPIO_SOFTWARE_CONTROL(RAIN_GAUGE_SENSOR_PORT_BASE, RAIN_GAUGE_SENSOR_PIN_MASK);
@@ -437,8 +451,7 @@ configure(int type, int value)
     GPIO_TRIGGER_SINGLE_EDGE(RAIN_GAUGE_SENSOR_PORT_BASE,
                              RAIN_GAUGE_SENSOR_PIN_MASK);
     ioc_set_over(RAIN_GAUGE_SENSOR_PORT, RAIN_GAUGE_SENSOR_PIN, IOC_OVERRIDE_DIS);
-    gpio_register_callback(weather_meter_interrupt_handler, RAIN_GAUGE_SENSOR_PORT,
+    gpio_hal_register_handler(&rain_handler);
-                           RAIN_GAUGE_SENSOR_PIN);
 
     process_start(&weather_meter_int_process, NULL);
 

examples/6tisch/simple-node/Makefile

@@ -3,9 +3,12 @@ all: $(CONTIKI_PROJECT)
 
 CONTIKI=../../..
 
-MAKE_WITH_ORCHESTRA ?= 0 # force Orchestra from command line
+ # force Orchestra from command line
-MAKE_WITH_SECURITY ?= 0 # force Security from command line
+MAKE_WITH_ORCHESTRA ?= 0
-MAKE_WITH_PERIODIC_ROUTES_PRINT ?= 0 # print #routes periodically, used for regression tests
+# force Security from command line
+MAKE_WITH_SECURITY ?= 0
+ # print #routes periodically, used for regression tests
+MAKE_WITH_PERIODIC_ROUTES_PRINT ?= 0
 
 MAKE_MAC = MAKE_MAC_TSCH
 MODULES += os/services/shell

os/net/ipv6/sicslowpan.c

@@ -671,8 +671,8 @@ compress_hdr_iphc(linkaddr_t *link_destaddr)
   int ext_hdr_len;
   struct uip_udp_hdr *udp_buf;
 
-#if LOG_DBG_ENABLED
+  if(LOG_DBG_ENABLED) {
-  { uint16_t ndx;
+    uint16_t ndx;
     LOG_DBG("before compression (%d): ", UIP_IP_BUF->len[1]);
     for(ndx = 0; ndx < UIP_IP_BUF->len[1] + 40; ndx++) {
       uint8_t data = ((uint8_t *) (UIP_IP_BUF))[ndx];
@@ -680,7 +680,6 @@ compress_hdr_iphc(linkaddr_t *link_destaddr)
     }
     LOG_DBG("\n");
   }
-#endif /* LOG_DBG_ENABLED */
 
   hc06_ptr = PACKETBUF_IPHC_BUF + 2;
   /*
@@ -996,8 +995,8 @@ compress_hdr_iphc(linkaddr_t *link_destaddr)
   PACKETBUF_IPHC_BUF[0] = iphc0;
   PACKETBUF_IPHC_BUF[1] = iphc1;
 
-#if LOG_DBG_ENABLED
+  if(LOG_DBG_ENABLED) {
-  { uint16_t ndx;
+    uint16_t ndx;
     LOG_DBG("after compression %d: ", (int)(hc06_ptr - packetbuf_ptr));
     for(ndx = 0; ndx < hc06_ptr - packetbuf_ptr; ndx++) {
       uint8_t data = ((uint8_t *) packetbuf_ptr)[ndx];
@@ -1005,7 +1004,6 @@ compress_hdr_iphc(linkaddr_t *link_destaddr)
     }
     LOG_DBG("\n");
   }
-#endif
 
   packetbuf_hdr_len = hc06_ptr - packetbuf_ptr;
 }
@@ -1906,8 +1904,7 @@ input(void)
     LOG_INFO("input: IP packet ready (length %d)\n",
 	    uip_len);
 
-#if LOG_DBG_ENABLED
+    if(LOG_DBG_ENABLED) {
-    {
       uint16_t ndx;
       LOG_DBG("after decompression %u:", UIP_IP_BUF->len[1]);
       for (ndx = 0; ndx < UIP_IP_BUF->len[1] + 40; ndx++) {
@@ -1916,7 +1913,6 @@ input(void)
       }
       LOG_DBG("\n");
     }
-#endif /* LOG_DBG_ENABLED */
 
     /* if callback is set then set attributes and call */
     if(callback) {

os/net/ipv6/uip-ds6-route.c

@@ -103,7 +103,6 @@ LIST(notificationlist);
 #endif
 
 /*---------------------------------------------------------------------------*/
-#if LOG_DBG_ENABLED
 static void
 assert_nbr_routes_list_sane(void)
 {
@@ -131,7 +130,6 @@ assert_nbr_routes_list_sane(void)
   }
 #endif /* (UIP_MAX_ROUTES != 0) */
 }
-#endif /* LOG_DBG_ENABLED */
 /*---------------------------------------------------------------------------*/
 #if UIP_DS6_NOTIFICATIONS
 static void
@@ -330,9 +328,9 @@ uip_ds6_route_add(uip_ipaddr_t *ipaddr, uint8_t length,
   uip_ds6_route_t *r;
   struct uip_ds6_route_neighbor_route *nbrr;
 
-#if LOG_DBG_ENABLED
+  if(LOG_DBG_ENABLED) {
     assert_nbr_routes_list_sane();
-#endif /* LOG_DBG_ENABLED */
+  }
 
   if(ipaddr == NULL || nexthop == NULL) {
     return NULL;
@@ -473,9 +471,9 @@ uip_ds6_route_add(uip_ipaddr_t *ipaddr, uint8_t length,
   call_route_callback(UIP_DS6_NOTIFICATION_ROUTE_ADD, ipaddr, nexthop);
 #endif
 
-#if LOG_DBG_ENABLED
+  if(LOG_DBG_ENABLED) {
     assert_nbr_routes_list_sane();
-#endif /* LOG_DBG_ENABLED */
+  }
   return r;
 
 #else /* (UIP_MAX_ROUTES != 0) */
@@ -489,9 +487,11 @@ uip_ds6_route_rm(uip_ds6_route_t *route)
 {
 #if (UIP_MAX_ROUTES != 0)
   struct uip_ds6_route_neighbor_route *neighbor_route;
-#if LOG_DBG_ENABLED
+
+  if(LOG_DBG_ENABLED) {
     assert_nbr_routes_list_sane();
-#endif /* LOG_DBG_ENABLED */
+  }
+
   if(route != NULL && route->neighbor_routes != NULL) {
 
     LOG_INFO("Rm: removing route: ");
@@ -541,9 +541,9 @@ uip_ds6_route_rm(uip_ds6_route_t *route)
 #endif
   }
 
-#if LOG_DBG_ENABLED
+  if(LOG_DBG_ENABLED) {
     assert_nbr_routes_list_sane();
-#endif /* LOG_DBG_ENABLED */
+  }
 
 #endif /* (UIP_MAX_ROUTES != 0) */
   return;
@@ -553,9 +553,10 @@ uip_ds6_route_rm(uip_ds6_route_t *route)
 static void
 rm_routelist(struct uip_ds6_route_neighbor_routes *routes)
 {
-#if LOG_DBG_ENABLED
+  if(LOG_DBG_ENABLED) {
     assert_nbr_routes_list_sane();
-#endif /* LOG_DBG_ENABLED */
+  }
+
   if(routes != NULL && routes->route_list != NULL) {
     struct uip_ds6_route_neighbor_route *r;
     r = list_head(routes->route_list);
@@ -565,9 +566,10 @@ rm_routelist(struct uip_ds6_route_neighbor_routes *routes)
     }
     nbr_table_remove(nbr_routes, routes);
   }
-#if LOG_DBG_ENABLED
+
+  if(LOG_DBG_ENABLED) {
     assert_nbr_routes_list_sane();
-#endif /* LOG_DBG_ENABLED */
+  }
 }
 /*---------------------------------------------------------------------------*/
 static void
@@ -603,9 +605,9 @@ uip_ds6_defrt_add(uip_ipaddr_t *ipaddr, unsigned long interval)
 {
   uip_ds6_defrt_t *d;
 
-#if LOG_DBG_ENABLED
+  if(LOG_DBG_ENABLED) {
     assert_nbr_routes_list_sane();
-#endif /* LOG_DBG_ENABLED */
+  }
 
   if(ipaddr == NULL) {
     return NULL;
@@ -643,9 +645,9 @@ uip_ds6_defrt_add(uip_ipaddr_t *ipaddr, unsigned long interval)
   call_route_callback(UIP_DS6_NOTIFICATION_DEFRT_ADD, ipaddr, ipaddr);
 #endif
 
-#if LOG_DBG_ENABLED
+if(LOG_DBG_ENABLED) {
   assert_nbr_routes_list_sane();
-#endif /* LOG_DBG_ENABLED */
+}
 
   return d;
 }
@@ -655,9 +657,9 @@ uip_ds6_defrt_rm(uip_ds6_defrt_t *defrt)
 {
   uip_ds6_defrt_t *d;
 
-#if LOG_DBG_ENABLED
+  if(LOG_DBG_ENABLED) {
     assert_nbr_routes_list_sane();
-#endif /* LOG_DBG_ENABLED */
+  }
 
   /* Make sure that the defrt is in the list before we remove it. */
   for(d = list_head(defaultrouterlist);
@@ -675,10 +677,10 @@ uip_ds6_defrt_rm(uip_ds6_defrt_t *defrt)
       return;
     }
   }
-#if LOG_DBG_ENABLED
-  assert_nbr_routes_list_sane();
-#endif /* LOG_DBG_ENABLED */
 
+  if(LOG_DBG_ENABLED) {
+    assert_nbr_routes_list_sane();
+  }
 }
 /*---------------------------------------------------------------------------*/
 uip_ds6_defrt_t *

os/net/ipv6/uip-sr.c

@@ -217,13 +217,13 @@ uip_sr_periodic(unsigned seconds)
           break;
         }
       }
-#if LOG_INFO_ENABLED
+      if(LOG_INFO_ENABLED) {
         uip_ipaddr_t node_addr;
         NETSTACK_ROUTING.get_sr_node_ipaddr(&node_addr, l);
         LOG_INFO("NS: removing expired node ");
         LOG_INFO_6ADDR(&node_addr);
         LOG_INFO_("\n");
-#endif /* LOG_INFO_ENABLED */
+      }
       /* No child found, deallocate node */
       list_remove(nodelist, l);
       memb_free(&nodememb, l);

os/net/mac/tsch/tsch-schedule.c

@@ -452,16 +452,15 @@ tsch_schedule_print(void)
   if(!tsch_is_locked()) {
     struct tsch_slotframe *sf = list_head(slotframe_list);
 
-    printf("Schedule: slotframe list\n");
+    LOG_PRINT("----- start slotframe list -----\n");
 
     while(sf != NULL) {
       struct tsch_link *l = list_head(sf->links_list);
 
-      printf("[Slotframe] Handle %u, size %u\n", sf->handle, sf->size.val);
+      LOG_PRINT("Slotframe Handle %u, size %u\n", sf->handle, sf->size.val);
-      printf("List of links:\n");
 
       while(l != NULL) {
-        printf("[Link] Options %02x, type %u, timeslot %u, channel offset %u, address %u\n",
+        LOG_PRINT("* Link Options %02x, type %u, timeslot %u, channel offset %u, address %u\n",
                l->link_options, l->link_type, l->timeslot, l->channel_offset, l->addr.u8[7]);
         l = list_item_next(l);
       }
@@ -469,7 +468,7 @@ tsch_schedule_print(void)
       sf = list_item_next(sf);
     }
 
-    printf("Schedule: end of slotframe list\n");
+    LOG_PRINT("----- end slotframe list -----\n");
   }
 }
 /*---------------------------------------------------------------------------*/

os/net/routing/rpl-lite/rpl-dag.c

@@ -185,9 +185,9 @@ rpl_global_repair(const char *str)
   if(rpl_dag_root_is_root()) {
     LOG_WARN("initiating global repair (%s), version %u, rank %u)\n",
          str, curr_instance.dag.version, curr_instance.dag.rank);
-#if LOG_INFO_ENABLED
+    if(LOG_INFO_ENABLED) {
       rpl_neighbor_print_list("Global repair (before)");
-#endif /* LOG_INFO_ENABLED */
+    }
 
     /* Initiate global repair */
     RPL_LOLLIPOP_INCREMENT(curr_instance.dag.version);  /* New DAG version */
@@ -202,9 +202,9 @@ global_repair_non_root(rpl_dio_t *dio)
   if(!rpl_dag_root_is_root()) {
     LOG_WARN("participating in global repair, version %u, rank %u)\n",
          curr_instance.dag.version, curr_instance.dag.rank);
-#if LOG_INFO_ENABLED
+    if(LOG_INFO_ENABLED) {
       rpl_neighbor_print_list("Global repair (before)");
-#endif /* LOG_INFO_ENABLED */
+    }
     /* Re-initialize configuration from DIO */
     init_dag_from_dio(dio);
     rpl_local_repair("Global repair");
@@ -325,9 +325,9 @@ rpl_dag_update_state(void)
         rpl_timers_schedule_leaving();
       }
 
-#if LOG_INFO_ENABLED
+      if(LOG_INFO_ENABLED) {
         rpl_neighbor_print_list("Parent switch");
-#endif /* LOG_INFO_ENABLED */
+      }
     }
   }
 

os/net/routing/rpl-lite/rpl-nbr-policy.c

@@ -65,19 +65,7 @@ static int num_parents;   /* all nodes that are possible parents */
 static int num_free;
 static linkaddr_t *worst_rank_nbr_lladdr; /* lladdr of the the neighbor with the worst rank */
 static rpl_rank_t worst_rank;
-/*---------------------------------------------------------------------------*/
+
-#if LOG_DBG_ENABLED
-/* Print out state periodically */
-static void update_state(void);
-static struct ctimer periodic_timer;
-static int timer_init = 0;
-static void
-handle_periodic_timer(void *ptr)
-{
-  update_state();
-  ctimer_restart(&periodic_timer);
-}
-#endif /* LOG_DBG_ENABLED */
 /*---------------------------------------------------------------------------*/
 static void
 update_state(void)
@@ -87,14 +75,6 @@ update_state(void)
   rpl_rank_t nbr_rank;
   int num_used = 0;
 
-#if LOG_DBG_ENABLED
-  if(!timer_init) {
-    timer_init = 1;
-    ctimer_set(&periodic_timer, 60 * CLOCK_SECOND,
-               &handle_periodic_timer, NULL);
-  }
-#endif /* LOG_DBG_ENABLED */
-
   worst_rank = 0;
   worst_rank_nbr_lladdr = NULL;
   num_parents = 0;

os/net/routing/rpl-lite/rpl-timers.c

@@ -514,9 +514,9 @@ handle_periodic_timer(void *ptr)
   the meaning of last_advertised_rank changes with time */
   rpl_dag_update_state();
 
-#if LOG_INFO_ENABLED
+  if(LOG_INFO_ENABLED) {
     rpl_neighbor_print_list("Periodic");
-#endif /* LOG_INFO_ENABLED */
+  }
 
   ctimer_reset(&periodic_timer);
 }

os/sys/log.h

@@ -145,27 +145,36 @@ extern struct log_module all_modules[];
                          } while (0)
 
 /* More compact versions of LOG macros */
+#define LOG_PRINT(...)         LOG(1, 0, "PRI", __VA_ARGS__)
 #define LOG_ERR(...)           LOG(1, LOG_LEVEL_ERR, "ERR", __VA_ARGS__)
 #define LOG_WARN(...)          LOG(1, LOG_LEVEL_WARN, "WARN", __VA_ARGS__)
 #define LOG_INFO(...)          LOG(1, LOG_LEVEL_INFO, "INFO", __VA_ARGS__)
 #define LOG_DBG(...)           LOG(1, LOG_LEVEL_DBG, "DBG", __VA_ARGS__)
 
+#define LOG_PRINT_(...)         LOG(0, 0, "PRI", __VA_ARGS__)
 #define LOG_ERR_(...)           LOG(0, LOG_LEVEL_ERR, "ERR", __VA_ARGS__)
 #define LOG_WARN_(...)          LOG(0, LOG_LEVEL_WARN, "WARN", __VA_ARGS__)
 #define LOG_INFO_(...)          LOG(0, LOG_LEVEL_INFO, "INFO", __VA_ARGS__)
 #define LOG_DBG_(...)           LOG(0, LOG_LEVEL_DBG, "DBG", __VA_ARGS__)
 
+#define LOG_PRINT_LLADDR(...)  LOG_LLADDR(0, __VA_ARGS__)
 #define LOG_ERR_LLADDR(...)    LOG_LLADDR(LOG_LEVEL_ERR, __VA_ARGS__)
 #define LOG_WARN_LLADDR(...)   LOG_LLADDR(LOG_LEVEL_WARN, __VA_ARGS__)
 #define LOG_INFO_LLADDR(...)   LOG_LLADDR(LOG_LEVEL_INFO, __VA_ARGS__)
 #define LOG_DBG_LLADDR(...)    LOG_LLADDR(LOG_LEVEL_DBG, __VA_ARGS__)
 
+#define LOG_PRINT_6ADDR(...)   LOG_6ADDR(0, __VA_ARGS__)
 #define LOG_ERR_6ADDR(...)     LOG_6ADDR(LOG_LEVEL_ERR, __VA_ARGS__)
 #define LOG_WARN_6ADDR(...)    LOG_6ADDR(LOG_LEVEL_WARN, __VA_ARGS__)
 #define LOG_INFO_6ADDR(...)    LOG_6ADDR(LOG_LEVEL_INFO, __VA_ARGS__)
 #define LOG_DBG_6ADDR(...)     LOG_6ADDR(LOG_LEVEL_DBG, __VA_ARGS__)
 
-/* For testing log level */
+/* For checking log level.
+   As this builds on curr_log_level variables, this should not be used
+   in pre-processor macros. Use in a C 'if' statement instead, e.g.:
+   if(LOG_INFO_ENABLED) { ... }
+   Note that most compilers will still be able to strip the code out
+   for low enough log levels configurations. */
 #define LOG_ERR_ENABLED        ((LOG_LEVEL) >= LOG_LEVEL_ERR)
 #define LOG_WARN_ENABLED       ((LOG_LEVEL) >= LOG_LEVEL_WARN)
 #define LOG_INFO_ENABLED       ((LOG_LEVEL) >= LOG_LEVEL_INFO)