giomba
/
nes-proj
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

zoul: remote: Factor out duplicate RTC init 

Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
This commit is contained in:
Benoît Thébaudeau 2016-11-17 18:14:33 +01:00 committed by Benoît Thébaudeau
parent 2866ae0555
commit 12ea1bd492
11 changed files with 97 additions and 90 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
examples/zolertia/zoul/rev-b/Makefile
View File

@ -4,9 +4,6 @@ CONTIKI_PROJECT = test-power-mgmt
BOARD ?= remote-revb
# Works in Linux and probably on OSX too (RTCC example)
CFLAGS = -DDATE="\"`date +"%02u %02d %02m %02y %02H %02M %02S"`\""
all: $(CONTIKI_PROJECT)
CONTIKI = ../../../..

3
examples/zolertia/zoul/rev-b/project-conf.h
View File

@ -46,6 +46,9 @@
#define BROADCAST_CHANNEL 129
#define NETSTACK_CONF_RDC nullrdc_driver
#define RTC_CONF_INIT 1
#define RTC_CONF_SET_FROM_SYS 1
#endif /* PROJECT_CONF_H_ */
/**

38
examples/zolertia/zoul/rev-b/test-power-mgmt.c
View File

@ -59,10 +59,6 @@ static struct etimer et;
/* RE-Mote revision B, low-power PIC version */
#define PM_EXPECTED_VERSION 0x20
/*---------------------------------------------------------------------------*/
#ifndef DATE
#define DATE "Unknown"
#endif
/*---------------------------------------------------------------------------*/
#define TEST_LEDS_FAIL leds_off(LEDS_ALL); \
leds_on(LEDS_RED); \
PROCESS_EXIT();
@ -80,7 +76,6 @@ PROCESS_THREAD(test_remote_pm, ev, data)
static uint8_t aux;
static uint16_t voltage;
static uint32_t cycles;
static char *next;
PROCESS_BEGIN();
@ -162,38 +157,13 @@ PROCESS_THREAD(test_remote_pm, ev, data)
/* Configure the RTCC to schedule a "hard" restart of the shutdown mode,
* waking up from a RTCC interrupt to the low-power PIC
*/
printf("PM: System date: %s\n", DATE);
if(strcmp("Unknown", DATE) == 0) {
printf("PM: could not retrieve date from system\n");
printf("PM\n");
if(rtcc_get_time_date(simple_td) == AB08_ERROR) {
printf("PM: Couldn't read time and date\n");
TEST_LEDS_FAIL;
}
/* Configure RTC and return structure with all parameters */
rtcc_init();
/* Configure the RTC with the current values */
simple_td->weekdays = (uint8_t)strtol(DATE, &next, 10);
simple_td->day = (uint8_t)strtol(next, &next, 10);
simple_td->months = (uint8_t)strtol(next, &next, 10);
simple_td->years = (uint8_t)strtol(next, &next, 10);
simple_td->hours = (uint8_t)strtol(next, &next, 10);
simple_td->minutes = (uint8_t)strtol(next, &next, 10);
simple_td->seconds = (uint8_t)strtol(next, NULL, 10);
simple_td->miliseconds = 0;
simple_td->mode = RTCC_24H_MODE;
simple_td->century = RTCC_CENTURY_20XX;
if(rtcc_set_time_date(simple_td) == AB08_ERROR) {
printf("PM: Time and date configuration failed\n");
TEST_LEDS_FAIL;
} else {
if(rtcc_get_time_date(simple_td) == AB08_ERROR) {
printf("PM: Couldn't read time and date\n");
TEST_LEDS_FAIL;
}
}
printf("PM: Configured time: ");
rtcc_print(RTCC_PRINT_DATE_DEC);

3
examples/zolertia/zoul/rtcc/Makefile
View File

@ -3,9 +3,6 @@ CONTIKI_PROJECT = test-rtcc
TARGET = zoul
# Works in Linux and probably on OSX too (RTCC example)
CFLAGS = -DDATE="\"`date +"%02u %02d %02m %02y %02H %02M %02S"`\""
all: $(CONTIKI_PROJECT)
CONTIKI = ../../../..

3
examples/zolertia/zoul/rtcc/project-conf.h
View File

@ -47,6 +47,9 @@
#define NETSTACK_CONF_RDC nullrdc_driver
#define RTC_CONF_INIT 1
#define RTC_CONF_SET_FROM_SYS 1
#endif /* PROJECT_CONF_H_ */
/*---------------------------------------------------------------------------*/
/**

51
examples/zolertia/zoul/rtcc/test-rtcc.c
View File

@ -55,10 +55,6 @@
#include <stdio.h>
#include <stdlib.h>
/*---------------------------------------------------------------------------*/
#ifndef DATE
#define DATE "Unknown"
#endif
/*---------------------------------------------------------------------------*/
#define LOOP_PERIOD 60L
#define LOOP_INTERVAL (CLOCK_SECOND * LOOP_PERIOD)
#define TEST_ALARM_SECOND 15
@ -109,58 +105,13 @@ rtcc_interrupt_callback(uint8_t value)
/*---------------------------------------------------------------------------*/
PROCESS_THREAD(test_remote_rtcc_process, ev, data)
{
static char *next;
PROCESS_BEGIN();
/* Alternatively for test only, undefine DATE and define on your own as
* #define DATE "07 06 12 15 16 00 00"
* Also note that if you restart the node at a given time, it will use the
* already defined DATE, so if you want to update the device date/time you
* need to reflash the node
*/
/* Get the system date in the following format: wd dd mm yy hh mm ss */
printf("RE-Mote RTC test, system date: %s\n", DATE);
/* Sanity check */
if(strcmp("Unknown", DATE) == 0) {
printf("Fail: could not retrieve date from system\n");
PROCESS_EXIT();
}
/* Configure RTC and return structure with all parameters */
rtcc_init();
printf("RE-Mote RTC test\n");
/* Map interrupt callback handler */
RTCC_REGISTER_INT1(rtcc_interrupt_callback);
/* Configure the RTC with the current values */
simple_td->weekdays = (uint8_t)strtol(DATE, &next, 10);
simple_td->day = (uint8_t)strtol(next, &next, 10);
simple_td->months = (uint8_t)strtol(next, &next, 10);
simple_td->years = (uint8_t)strtol(next, &next, 10);
simple_td->hours = (uint8_t)strtol(next, &next, 10);
simple_td->minutes = (uint8_t)strtol(next, &next, 10);
simple_td->seconds = (uint8_t)strtol(next, NULL, 10);
/* Don't care about the milliseconds... */
simple_td->miliseconds = 0;
/* This example relies on 24h mode */
simple_td->mode = RTCC_24H_MODE;
/* And to simplify the configuration, it relies it will be executed in the
* present century
*/
simple_td->century = RTCC_CENTURY_20XX;
/* Set the time and date */
if(rtcc_set_time_date(simple_td) == AB08_ERROR) {
printf("Fail: Time and date not configured\n");
PROCESS_EXIT();
}
/* Wait a bit */
etimer_set(&et, (CLOCK_SECOND * 2));
PROCESS_WAIT_EVENT_UNTIL(etimer_expired(&et));

3
platform/zoul/Makefile.zoul
View File

@ -18,6 +18,9 @@ endif
PYTHON = python
BSL_FLAGS += -e -w -v
# Works in Linux and probably on OSX too (RTCC example)
CFLAGS += -DDATE="\"`date +"%02u %02d %02m %02y %02H %02M %02S"`\""
### Configure the build for the board and pull in board-specific sources
CONTIKI_TARGET_DIRS += . dev
CONTIKI_TARGET_DIRS += . $(BOARD)

21
platform/zoul/contiki-conf.h
View File

@ -577,6 +577,27 @@ typedef uint32_t rtimer_clock_t;
#endif
/** @} */
/*---------------------------------------------------------------------------*/
/**
* \name RTC
*
* @{
*/
#ifdef PLATFORM_HAS_RTC
#ifndef RTC_CONF_INIT
#define RTC_CONF_INIT 0 /**< Whether to initialize the RTC */
#endif
#ifndef RTC_CONF_SET_FROM_SYS
#define RTC_CONF_SET_FROM_SYS 0 /**< Whether to set the RTC from the build system */
#endif
#else
#undef RTC_CONF_INIT
#define RTC_CONF_INIT 0
#endif
/** @} */
/*---------------------------------------------------------------------------*/
#endif /* CONTIKI_CONF_H_ */

60
platform/zoul/contiki-main.c
View File

@ -57,6 +57,7 @@
#include "dev/cc2538-rf.h"
#include "dev/udma.h"
#include "dev/crypto.h"
#include "dev/rtcc.h"
#include "usb/usb-serial.h"
#include "lib/random.h"
#include "net/netstack.h"
@ -72,6 +73,7 @@
#include <stdint.h>
#include <string.h>
#include <stdlib.h>
#include <stdio.h>
/*---------------------------------------------------------------------------*/
#if STARTUP_CONF_VERBOSE
@ -109,6 +111,62 @@ fade(unsigned char l)
}
/*---------------------------------------------------------------------------*/
static void
rtc_init(void)
{
#if RTC_CONF_INIT
#if RTC_CONF_SET_FROM_SYS
char *next;
simple_td_map td;
#endif
/* Configure RTC and return structure with all parameters */
rtcc_init();
#if RTC_CONF_SET_FROM_SYS
#ifndef DATE
#error Could not retrieve date from system
#endif
/* Alternatively, for test only, undefine DATE and define it on your own as:
* #define DATE "07 06 12 15 16 00 00"
* Also note that if you restart the node at a given time, it will use the
* already defined DATE, so if you want to update the device date/time you
* need to reflash the node.
*/
/* Get the system date in the following format: wd dd mm yy hh mm ss */
PRINTF("Setting RTC from system date: %s\n", DATE);
/* Configure the RTC with the current values */
td.weekdays = (uint8_t)strtol(DATE, &next, 10);
td.day = (uint8_t)strtol(next, &next, 10);
td.months = (uint8_t)strtol(next, &next, 10);
td.years = (uint8_t)strtol(next, &next, 10);
td.hours = (uint8_t)strtol(next, &next, 10);
td.minutes = (uint8_t)strtol(next, &next, 10);
td.seconds = (uint8_t)strtol(next, NULL, 10);
/* Don't care about the milliseconds... */
td.miliseconds = 0;
/* This example relies on 24h mode */
td.mode = RTCC_24H_MODE;
/*
* And to simplify the configuration, it relies on the fact that it will be
* executed in the present century
*/
td.century = RTCC_CENTURY_20XX;
/* Set the time and date */
if(rtcc_set_time_date(&td) == AB08_ERROR) {
PRINTF("Failed to set time and date\n");
}
#endif
#endif
}
/*---------------------------------------------------------------------------*/
static void
set_rf_params(void)
{
uint16_t short_addr;
@ -204,6 +262,8 @@ main(void)
crypto_disable();
#endif
rtc_init();
netstack_init();
set_rf_params();

1
platform/zoul/remote-reva/board.h
View File

@ -455,6 +455,7 @@
* requiring to put the PIC into deep-sleep and waking up at a certain time.
* @{
*/
#define PLATFORM_HAS_RTC 1
#define RTC_SDA_PORT I2C_SDA_PORT
#define RTC_SDA_PIN I2C_SDA_PIN
#define RTC_SCL_PORT I2C_SCL_PORT

1
platform/zoul/remote-revb/board.h
View File

@ -482,6 +482,7 @@
*
* @{
*/
#define PLATFORM_HAS_RTC 1
#define RTC_SDA_PORT I2C_SDA_PORT
#define RTC_SDA_PIN I2C_SDA_PIN
#define RTC_SCL_PORT I2C_SCL_PORT