giomba
/
nes-proj
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

I2C driver taken from PR #677, uncrustified, made functions static and added burst modes

This commit is contained in:
Antonio Lignan 2015-03-06 16:32:33 +01:00
parent c76316adf2
commit 22be9fd8b7
3 changed files with 495 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
cpu/cc2538/Makefile.cc2538
View File

@ -52,6 +52,7 @@ CONTIKI_CPU_SOURCEFILES += nvic.c cpu.c sys-ctrl.c gpio.c ioc.c spi.c adc.c
CONTIKI_CPU_SOURCEFILES += cc2538-rf.c udma.c lpm.c
CONTIKI_CPU_SOURCEFILES += dbg.c ieee-addr.c
CONTIKI_CPU_SOURCEFILES += slip-arch.c slip.c
CONTIKI_CPU_SOURCEFILES += i2c.c
DEBUG_IO_SOURCEFILES += dbg-printf.c dbg-snprintf.c dbg-sprintf.c strformat.c

254
cpu/cc2538/dev/i2c.c Normal file
View File

@ -0,0 +1,254 @@
/*
* Copyright (c) 2015, Mehdi Migault
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/**
* \addtogroup cc2538-i2c cc2538 I2C Control
* @{
*
* \file
* Implementation file of the I2C Control module
*
* \author
* Mehdi Migault
*/
#include "i2c.h"
#include <stdint.h>
#include "clock.h"
/*---------------------------------------------------------------------------*/
/* Additional functions */
static uint32_t
get_sys_clock(void)
{
/* Get the clock status diviser */
return SYS_CTRL_32MHZ /
((REG(SYS_CTRL_CLOCK_STA) & SYS_CTRL_CLOCK_STA_SYS_DIV) + 1);
}
/*---------------------------------------------------------------------------*/
void
i2c_init(uint8_t port_sda, uint8_t pin_sda, uint8_t port_scl, uint8_t pin_scl,
uint32_t bus_speed)
{
/* Enable I2C clock in different modes */
REG(SYS_CTRL_RCGCI2C) |= 1; /* Run mode */
/* Reset I2C peripheral */
REG(SYS_CTRL_SRI2C) |= 1; /* Reset position */
/* Delay for a little bit */
clock_delay_usec(50);
REG(SYS_CTRL_SRI2C) &= ~1; /* Normal position */
/* Set pins in input */
GPIO_SET_INPUT(GPIO_PORT_TO_BASE(port_sda), GPIO_PIN_MASK(pin_sda));
GPIO_SET_INPUT(GPIO_PORT_TO_BASE(port_scl), GPIO_PIN_MASK(pin_scl));
/* Set peripheral control for the pins */
GPIO_PERIPHERAL_CONTROL(GPIO_PORT_TO_BASE(port_sda), GPIO_PIN_MASK(pin_sda));
GPIO_PERIPHERAL_CONTROL(GPIO_PORT_TO_BASE(port_scl), GPIO_PIN_MASK(pin_scl));
/* Set the pad to no drive type */
ioc_set_over(port_sda, pin_sda, IOC_OVERRIDE_DIS);
ioc_set_over(port_scl, pin_scl, IOC_OVERRIDE_DIS);
/* Set pins as peripheral inputs */
REG(IOC_I2CMSSDA) = ioc_input_sel(port_sda, pin_sda);
REG(IOC_I2CMSSCL) = ioc_input_sel(port_scl, pin_scl);
/* Set pins as peripheral outputs */
ioc_set_sel(port_sda, pin_sda, IOC_PXX_SEL_I2C_CMSSDA);
ioc_set_sel(port_scl, pin_scl, IOC_PXX_SEL_I2C_CMSSCL);
/* Enable the I2C master module */
i2c_master_enable();
/* t the master clock frequency */
i2c_set_frequency(bus_speed);
}
/*---------------------------------------------------------------------------*/
void
i2c_master_enable(void)
{
REG(I2CM_CR) |= 0x10; /* Set MFE bit */
}
/*---------------------------------------------------------------------------*/
void
i2c_master_disable(void)
{
REG(I2CM_CR) &= ~0x10; /* Reset MFE bit */
}
/*---------------------------------------------------------------------------*/
void
i2c_set_frequency(uint32_t freq)
{
/* Peripheral clock setting, using the system clock */
REG(I2CM_TPR) = ((get_sys_clock() + (2 * 10 * freq) - 1) /
(2 * 10 * freq)) - 1;
}
/*---------------------------------------------------------------------------*/
void
i2c_master_set_slave_address(uint8_t slave_addr, uint8_t access_mode)
{
if(access_mode) {
REG(I2CM_SA) = ((slave_addr << 1) | 1);
} else {
REG(I2CM_SA) = (slave_addr << 1);
}
}
/*---------------------------------------------------------------------------*/
void
i2c_master_data_put(uint8_t data)
{
REG(I2CM_DR) = data;
}
/*---------------------------------------------------------------------------*/
uint8_t
i2c_master_data_get(void)
{
return REG(I2CM_DR);
}
/*---------------------------------------------------------------------------*/
void
i2c_master_command(uint8_t cmd)
{
REG(I2CM_CTRL) = cmd;
/* Here we need a delay, otherwise the I2C module keep the receiver mode */
clock_delay_usec(1);
}
/*---------------------------------------------------------------------------*/
uint8_t
i2c_master_busy(void)
{
return REG(I2CM_STAT) & I2CM_STAT_BUSY;
}
/*---------------------------------------------------------------------------*/
uint8_t
i2c_master_error(void)
{
uint8_t temp = REG(I2CM_STAT); /* Get all status */
if(temp & I2CM_STAT_BUSY) { /* No valid if BUSY bit is set */
return I2C_MASTER_ERR_NONE;
} else if(temp & (I2CM_STAT_ERROR | I2CM_STAT_ARBLST)) {
return temp; /* Compare later */
}
return I2C_MASTER_ERR_NONE;
}
/*---------------------------------------------------------------------------*/
uint8_t
i2c_single_send(uint8_t slave_addr, uint8_t data)
{
i2c_master_set_slave_address(slave_addr, I2C_SEND);
i2c_master_data_put(data);
i2c_master_command(I2C_MASTER_CMD_SINGLE_SEND);
while(i2c_master_busy());
/* Return the STAT register of I2C module if error occured, I2C_MASTER_ERR_NONE otherwise */
return i2c_master_error();
}
/*---------------------------------------------------------------------------*/
uint8_t
i2c_single_receive(uint8_t slave_addr, uint8_t *data)
{
uint32_t temp;
i2c_master_set_slave_address(slave_addr, I2C_RECEIVE);
i2c_master_command(I2C_MASTER_CMD_SINGLE_RECEIVE);
while(i2c_master_busy());
temp = i2c_master_error();
if(temp == I2C_MASTER_ERR_NONE) {
*data = i2c_master_data_get();
}
return temp;
}
/*---------------------------------------------------------------------------*/
uint8_t
i2c_burst_send(uint8_t slave_addr, uint8_t *data, uint8_t len)
{
uint8_t sent;
if((len == 0) || (data == NULL)) {
return I2CM_STAT_INVALID;
}
if(len == 1) {
return i2c_single_send(slave_addr, data[0]);
}
i2c_master_set_slave_address(slave_addr, I2C_SEND);
i2c_master_data_put(data[0]);
i2c_master_command(I2C_MASTER_CMD_BURST_SEND_START);
while(i2c_master_busy());
if(i2c_master_error() == I2C_MASTER_ERR_NONE) {
for(sent = 1; sent <= (len - 2); sent++) {
i2c_master_data_put(data[sent]);
i2c_master_command(I2C_MASTER_CMD_BURST_SEND_CONT);
while(i2c_master_busy());
}
/* This should be the last byte, stop sending */
i2c_master_data_put(data[len - 1]);
i2c_master_command(I2C_MASTER_CMD_BURST_SEND_FINISH);
while(i2c_master_busy());
}
/* Return the STAT register of I2C module if error occurred, I2C_MASTER_ERR_NONE otherwise */
return i2c_master_error();
}
/*---------------------------------------------------------------------------*/
uint8_t
i2c_burst_receive(uint8_t slave_addr, uint8_t *data, uint8_t len)
{
uint8_t recv = 0;
if((len == 0) || data == NULL) {
return I2CM_STAT_INVALID;
}
if(len == 1) {
return i2c_single_receive(slave_addr, &data[0]);
}
i2c_master_set_slave_address(slave_addr, I2C_RECEIVE);
i2c_master_command(I2C_MASTER_CMD_BURST_RECEIVE_START);
while(i2c_master_busy());
if(i2c_master_error() == I2C_MASTER_ERR_NONE) {
data[0] = i2c_master_data_get();
/* If we got 2 or more bytes pending to be received, keep going*/
for(recv = 1; recv <= (len - 2); recv++) {
i2c_master_command(I2C_MASTER_CMD_BURST_RECEIVE_CONT);
while(i2c_master_busy());
data[recv] = i2c_master_data_get();
}
/* This should be the last byte, stop receiving */
i2c_master_command(I2C_MASTER_CMD_BURST_RECEIVE_FINISH);
while(i2c_master_busy());
data[len - 1] = i2c_master_data_get();
}
return i2c_master_error();
}
/*---------------------------------------------------------------------------*/
/** @} */

240
cpu/cc2538/dev/i2c.h Normal file
View File

@ -0,0 +1,240 @@
/*
* Copyright (c) 2015, Mehdi Migault
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/**
* \addtogroup cc2538
* @{
*
* \defgroup cc2538-i2c cc2538 I2C Control
*
* cc2538 I2C Control Module
* @{
*
* \file
* Header file with declarations for the I2C Control module
*
* \author
* Mehdi Migault
*/
#ifndef I2C_H_
#define I2C_H_
#include "reg.h"
#include "sys-ctrl.h"
#include "gpio.h"
#include "ioc.h"
#include <stdio.h> /* For debug */
#include "clock.h" /* For temporisation */
/*---------------------------------------------------------------------------*/
/** \name I2C Master commands
* @{
*/
#define I2C_MASTER_CMD_SINGLE_SEND 0x00000007
#define I2C_MASTER_CMD_SINGLE_RECEIVE 0x00000007
#define I2C_MASTER_CMD_BURST_SEND_START 0x00000003
#define I2C_MASTER_CMD_BURST_SEND_CONT 0x00000001
#define I2C_MASTER_CMD_BURST_SEND_FINISH 0x00000005
#define I2C_MASTER_CMD_BURST_SEND_ERROR_STOP 0x00000004
#define I2C_MASTER_CMD_BURST_RECEIVE_START 0x0000000b
#define I2C_MASTER_CMD_BURST_RECEIVE_CONT 0x00000009
#define I2C_MASTER_CMD_BURST_RECEIVE_FINISH 0x00000005
#define I2C_MASTER_CMD_BURST_RECEIVE_ERROR_STOP 0x00000004
/** @} */
/*---------------------------------------------------------------------------*/
/** \name I2C Master status flags
* @{
*/
#define I2C_MASTER_ERR_NONE 0
#define I2CM_STAT_BUSY 0x00000001
#define I2CM_STAT_ERROR 0x00000002
#define I2CM_STAT_ADRACK 0x00000004
#define I2CM_STAT_DATACK 0x00000008
#define I2CM_STAT_ARBLST 0x00000010
#define I2CM_STAT_IDLE 0x00000020
#define I2CM_STAT_BUSBSY 0x00000040
#define I2CM_STAT_INVALID 0x00000080
/** @} */
/*---------------------------------------------------------------------------*/
/** \name I2C registers
* @{
*/
#define I2CM_CR 0x40020020 /* I2C master config */
#define I2CM_TPR 0x4002000C /* I2C master timer period */
#define I2CM_SA 0x40020000 /* I2C master slave address */
#define I2CM_DR 0x40020008 /* I2C master data */
#define I2CM_CTRL 0x40020004 /* Master control in write */
#define I2CM_STAT I2CM_CTRL /* Master status in read */
/** @} */
/*---------------------------------------------------------------------------*/
/** \name I2C Miscellaneous
* @{
*/
#define I2C_SCL_NORMAL_BUS_SPEED 100000 /* 100KHz I2C */
#define I2C_SCL_FAST_BUS_SPEED 400000 /* 400KHz I2C */
#define I2C_RECEIVE 0x01 /* Master receive */
#define I2C_SEND 0x00 /* Master send */
/** @} */
/*---------------------------------------------------------------------------*/
/**
* \name I2C Functions
* @{
*/
/**
* \brief Initialize the I2C peripheral and pins
* \param port_sda The GPIO number of the pin used fort SDA
* \param pin_sda The pin number used for SDA
* \param port_scl The GPIO number of the pin used fort SCL
* \param pin_scl The pin number used for SCL
* \param bus_speed The clock frequency used by I2C module
*
* \e bus_speed can take the following values:
*
* - I2C_SCL_NORMAL_BUS_SPEED : 100KHz
* - I2C_SCL_FAST_BUS_SPEED : 400KHz
*/
void i2c_init(uint8_t port_sda, uint8_t pin_sda, uint8_t port_scl,
uint8_t pin_scl, uint32_t bus_speed);
/** \brief Enable master I2C module */
void i2c_master_enable(void);
/** \brief Disable master I2C module */
void i2c_master_disable(void);
/**
* \brief Initialize I2C peripheral clock with given frequency
* \param freq The desired frequency
*
* \e freq can take the following values:
*
* - I2C_SCL_NORMAL_BUS_SPEED : 100KHz
* - I2C_SCL_FAST_BUS_SPEED : 400KHz
*/
void i2c_set_frequency(uint32_t freq);
/**
* \brief Set the address of slave and access mode for the next I2C communication
* \param slave_addr The receiver slave address on 7 bits
* \param access_mode The I2C access mode (send/receive)
*
* \e access_mode can take the following values:
*
* - I2C_RECEIVE : 1
* - I2C_SEND : 0
*/
void i2c_master_set_slave_address(uint8_t slave_addr, uint8_t access_mode);
/**
* \brief Prepare data to be transmitted
* \param data The byte of data to be transmitted from the I2C master
*/
void i2c_master_data_put(uint8_t data);
/**
* \brief Return received data from I2C
* \return The byte received by I2C after à receive command
*/
uint8_t i2c_master_data_get(void);
/**
* \brief Control the state of the master module for send and receive operations
* \param cmd The operation to perform
*
* \e cmd can take the following values:
*
* - I2C_MASTER_CMD_SINGLE_SEND
* - I2C_MASTER_CMD_SINGLE_RECEIVE
* - I2C_MASTER_CMD_BURST_SEND_START
* - I2C_MASTER_CMD_BURST_SEND_CONT
* - I2C_MASTER_CMD_BURST_SEND_FINISH
* - I2C_MASTER_CMD_BURST_SEND_ERROR_STOP
* - I2C_MASTER_CMD_BURST_RECEIVE_START
* - I2C_MASTER_CMD_BURST_RECEIVE_CONT
* - I2C_MASTER_CMD_BURST_RECEIVE_FINISH
* - I2C_MASTER_CMD_BURST_RECEIVE_ERROR_STOP
*/
void i2c_master_command(uint8_t cmd);
/**
* \brief Return the busy state of I2C module
* \retval 0 The I2C module is not busy
* \retval 1 The I2C module is busy
*/
uint8_t i2c_master_busy(void);
/**
* \brief Return the status register if error occurred during last communication
* \retval I2C_MASTER_ERR_NONE Return 0 if no error occurred
*
* If an error occurred, return the status register of the I2C module.
* Use the result with the I2CM_STAT_* flags to custom your processing
*/
uint8_t i2c_master_error(void);
/**
* \brief Perform all operations to send a byte to a slave
* \param slave_addr The adress of the slave to which data are sent
* \param data The data to send to the slave
* \return Return the value of i2c_master_error() after the I2C operation
*/
uint8_t i2c_single_send(uint8_t slave_addr, uint8_t data);
/**
* \brief Perform all operations to receive a byte from a slave
* \param slave_addr The address of the slave from which data are received
* \param data A pointer to store the received data
* \return Return the value of i2c_master_error() after the I2C operation
*/
uint8_t i2c_single_receive(uint8_t slave_addr, uint8_t *data);
/**
* \brief Perform all operations to send multiple bytes to a slave
* \param slave_addr The address of the slave to which data are sent
* \param data A pointer to the data to send to the slave
* \param len Number of bytes to send
* \return Return the value of i2c_master_error() after the I2C operation
*/
uint8_t i2c_burst_send(uint8_t slave_addr, uint8_t *data, uint8_t len);
/**
* \brief Perform all operations to receive multiple bytes from a slave
* \param slave_addr The address of the slave from which data are received
* \param data A pointer to store the received data
* \param len Number of bytes to receive
* \return Return the value of i2c_master_error() after the I2C operation
*/
uint8_t i2c_burst_receive(uint8_t slave_addr, uint8_t *data, uint8_t len);
/** @} */
#endif /* I2C_H_ */
/**
* @}
* @}
*/