CC26xx - fully shutdown the rf-core & abort rx op

Prior to this patch, the ieee radio driver did not explicitly abort
the rx operation or power down the analog components of the radio
prior to shutting down the rf-core.

The result of this was that the rf-core continued to use a lot of
power even while "off".

This patch fixes this problem.
This commit is contained in:
Billy Kozak 2015-09-14 13:18:01 -06:00
parent 552408b241
commit 324d03b53c
2 changed files with 27 additions and 0 deletions

View File

@ -1101,6 +1101,8 @@ off(void)
while(transmitting());
/* stopping the rx explicitly results in lower sleep-mode power usage */
rx_off();
rf_core_power_down();
/* Switch HF clock source to the RCOSC to preserve power */

View File

@ -201,6 +201,28 @@ rf_core_wait_cmd_done(void *cmd)
== RF_CORE_RADIO_OP_STATUS_DONE_OK;
}
/*---------------------------------------------------------------------------*/
static int
fs_powerdown(void)
{
rfc_CMD_FS_POWERDOWN_t cmd;
uint32_t cmd_status;
rf_core_init_radio_op((rfc_radioOp_t *)&cmd, sizeof(cmd), CMD_FS_POWERDOWN);
if(rf_core_send_cmd((uint32_t)&cmd, &cmd_status) != RF_CORE_CMD_OK) {
PRINTF("fs_powerdown: CMDSTA=0x%08lx\n", cmd_status);
return RF_CORE_CMD_ERROR;
}
if(rf_core_wait_cmd_done(&cmd) != RF_CORE_CMD_OK) {
PRINTF("fs_powerdown: CMDSTA=0x%08lx, status=0x%04x\n",
cmd_status, cmd.status);
return RF_CORE_CMD_ERROR;
}
return RF_CORE_CMD_OK;
}
/*---------------------------------------------------------------------------*/
int
rf_core_power_up()
{
@ -256,6 +278,9 @@ rf_core_power_down()
if(rf_core_is_accessible()) {
HWREG(RFC_DBELL_NONBUF_BASE + RFC_DBELL_O_RFCPEIFG) = 0x0;
HWREG(RFC_DBELL_NONBUF_BASE + RFC_DBELL_O_RFCPEIEN) = 0x0;
/* need to send FS_POWERDOWN or analog components will use power */
fs_powerdown();
}
/* Shut down the RFCORE clock domain in the MCU VD */