Burn and restore node id using external flash of Wismote

platform/wismote/apps/burn-nodeid.c

@@ -0,0 +1,80 @@
+/*
+ * Copyright (c) 2006, Swedish Institute of Computer Science.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the Institute nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * This file is part of the Contiki operating system.
+ *
+ */
+
+/**
+ * \file
+ *         A program for burning a node ID into the external flash of a Wismote.
+ * \author
+ *         Adam Dunkels <adam@sics.se>
+ */
+
+#include "dev/leds.h"
+#include "dev/watchdog.h"
+#include "sys/node-id.h"
+#include "contiki.h"
+#include "sys/etimer.h"
+
+#include <stdio.h>
+
+static struct etimer etimer;
+
+PROCESS(burn_process, "Burn node id");
+AUTOSTART_PROCESSES(&burn_process);
+/*---------------------------------------------------------------------------*/
+PROCESS_THREAD(burn_process, ev, data)
+{
+  PROCESS_BEGIN();
+
+  etimer_set(&etimer, 5 * CLOCK_SECOND);
+  PROCESS_WAIT_UNTIL(etimer_expired(&etimer));
+
+  watchdog_stop();
+  leds_on(LEDS_RED);
+#if NODEID
+  printf("Burning node id %d\n", NODEID);
+  node_id_burn(NODEID);
+  leds_on(LEDS_BLUE);
+  node_id_restore();
+  printf("Restored node id %d\n", node_id);
+#else
+#error "burn-nodeid must be compiled with nodeid=<the ID of the node>"
+  node_id_restore();
+  printf("Restored node id %d\n", node_id);
+#endif
+  leds_off(LEDS_RED + LEDS_BLUE);
+  watchdog_start();
+  while(1) {
+    PROCESS_WAIT_EVENT();
+  }
+  PROCESS_END();
+}
+/*---------------------------------------------------------------------------*/

platform/wismote/contiki-wismote-main.c

@@ -229,10 +229,12 @@ main(int argc, char **argv)
    * Hardware initialization done!
    */
 
-  node_id = NODE_ID;
-
   /* Restore node id if such has been stored in external mem */
-  //node_id_restore();
+  node_id_restore();
+
+  if(!node_id) {
+    node_id = NODE_ID;
+  }
 
   /* for setting "hardcoded" IEEE 802.15.4 MAC addresses */
 #ifdef IEEE_802154_MAC_ADDRESS

platform/wismote/node-id.c

@@ -47,25 +47,25 @@ unsigned short node_id = 0;
 void
 node_id_restore(void)
 {
-  /* unsigned char buf[4]; */
-  /* xmem_pread(buf, 4, NODE_ID_XMEM_OFFSET); */
-  /* if(buf[0] == 0xad && */
-  /*    buf[1] == 0xde) { */
-  /*   node_id = (buf[2] << 8) | buf[3]; */
-  /* } else { */
+  unsigned char buf[4];
+  xmem_pread(buf, 4, NODE_ID_XMEM_OFFSET);
+  if(buf[0] == 0xad &&
+     buf[1] == 0xde) {
+    node_id = (buf[2] << 8) | buf[3];
+  } else {
     node_id = 0;
-  /* } */
+  }
 }
 /*---------------------------------------------------------------------------*/
 void
 node_id_burn(unsigned short id)
 {
-  /* unsigned char buf[4]; */
-  /* buf[0] = 0xad; */
-  /* buf[1] = 0xde; */
-  /* buf[2] = id >> 8; */
-  /* buf[3] = id & 0xff; */
-  //xmem_erase(XMEM_ERASE_UNIT_SIZE, NODE_ID_XMEM_OFFSET);
-  //xmem_pwrite(buf, 4, NODE_ID_XMEM_OFFSET);
+  unsigned char buf[4];
+  buf[0] = 0xad;
+  buf[1] = 0xde;
+  buf[2] = id >> 8;
+  buf[3] = id & 0xff;
+  xmem_erase(XMEM_ERASE_UNIT_SIZE, NODE_ID_XMEM_OFFSET);
+  xmem_pwrite(buf, 4, NODE_ID_XMEM_OFFSET);
 }
 /*---------------------------------------------------------------------------*/