giomba/nes-proj
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Improvement batch.

Browse Source
This commit is contained in:
nvt-se 2007-07-05 08:35:13 +00:00
parent b13e9dde90
commit 836eae63cb
6 changed files with 64 additions and 65 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

46
platform/msb430/dev/cc1020-internal.h
View File

@ -54,17 +54,17 @@
#define CC1020_STATUS7 0x4B
// For CC1020_STATUS
#define LOCK_CONTINUOUS 0x10
#define CAL_COMPLETE 0x80
#define PA_POWER 0x0F // initial default for output power
#define LOCK_NOK 0x00
#define LOCK_OK 0x01
#define LOCK_RECAL_OK 0x02
#define CAL_TIMEOUT 0x7FFE
#define LOCK_TIMEOUT 0x7FFE
#define RESET_TIMEOUT 0x7FFE
#define TX_CURRENT 0x87
#define RX_CURRENT 0x86
#define LOCK_CONTINUOUS 0x10
#define CAL_COMPLETE 0x80
#define PA_POWER 0x0F // initial default for output power
#define LOCK_NOK 0x00
#define LOCK_OK 0x01
#define LOCK_RECAL_OK 0x02
#define CAL_TIMEOUT 0x7FFE
#define LOCK_TIMEOUT 0x7FFE
#define RESET_TIMEOUT 0x7FFE
#define TX_CURRENT 0x87
#define RX_CURRENT 0x86
// CC1020 driver configuration
#define CC1020_BUFFERSIZE 250
@ -99,14 +99,14 @@
#define ACK_TIMEOUT_115 4 // In RADIO_STROKE ticks
#define ACK_TIMEOUT_19 16
#define MHZ_869525 1
#define MHZ_869525 1
const u8_t cc1020_config_19200[41] = {
0x01, // 0x00, MAIN
0x0F, // 0x01, INTERFACE
0xFF, // 0x02, RESET
0x8F, // 0x03, SEQUENCING
//869.525 bei 50kHz
// 869.525 at 50kHz
0x3A, // 0x04, FREQ_2A
0x32, // 0x05, FREQ_1A
0x97, // 0x06, FREQ_0A // 19200
@ -152,7 +152,7 @@ const u8_t cc1020_config_115200[41] = {
0x0F, // 0x01, INTERFACE
0xFF, // 0x02, RESET
0x8F, // 0x03, SEQUENCING
// 869.525 bei 200kHz
// 869.525 at 200kHz
0x3A, // 0x04, FREQ_2A
0x32, // 0x05, FREQ_1A
0x97, // 0x06, FREQ_0A // 19200
@ -204,17 +204,21 @@ enum cc1020_state {
* @name Packet specification
* @{
*/
#define PREAMBLESIZE 6 // number of bytes in preamble
#define PREAMBLE 0xAA
#define SYNCWDSIZE 2 // number of bytes in syncword
const u8_t syncword[2] = {0xD3,0x91};
#define HDRSIZE 1 // number of bytes in header
#define TAILSIZE 2 // number of bytes in tail
#define TAIL 0xFA
__attribute__((packed))
struct cc1020_header {
u8_t length; // header: number of bytes in packet (incl. header)
u8_t length; // header: number of bytes in packet including header
};
#define PREAMBLESIZE 6
#define PREAMBLE 0xAA
#define TAILSIZE 2
#define TAIL 0xFA
#define SYNCWDSIZE (sizeof (syncword))
#define HDRSIZE (sizeof (struct cc1020_header))
///@}
/// cc1020 receiver state

59
platform/msb430/dev/cc1020.c
View File

@ -84,7 +84,7 @@ static enum cc1020_rxstate cc1020_rxstate = CC1020_RX_SEARCHING;
static unsigned short cc1020_rxlen = 0;
/// received signal strength indicator reading for last received packet
static unsigned char rssi;
static volatile unsigned char rssi;
/// callback when a packet has been received
static unsigned char cc1020_pa_power = PA_POWER;
@ -109,7 +109,6 @@ void
cc1020_init(const u8_t *config)
{
cc1020_event = process_alloc_event();
printf("cc1020_event = %d\n", cc1020_event);
cc1020_setupPD();
cc1020_reset();
@ -138,7 +137,6 @@ int
cc1020_on(void)
{
if (cc1020_power_mode == CC1020_ALWAYS_ON) {
// Switch to receive mode
cc1020_set_rx();
} else {
@ -152,6 +150,7 @@ cc1020_off(void)
{
if (cc1020_rxstate == CC1020_OFF)
return;
LNA_POWER_OFF(); // power down lna
_DINT();
cc1020_rxstate = CC1020_OFF;
@ -175,7 +174,7 @@ cc1020_set_rx(void)
UCTL0 |= CHAR | SYNC; // 8-bit character, SPI, Slave mode
// CKPH works also, but not CKPH+CKPL or none of them!!
UTCTL0 = CKPL + STC;
UTCTL0 = CKPL | STC;
URCTL0 = 0x00;
UBR00 = 0x00; // No baudrate divider
UBR10 = 0x00; // settings for a spi
@ -202,7 +201,6 @@ cc1020_set_rx(void)
void
cc1020_set_tx(void)
{
// configure radio rx
LNA_POWER_OFF(); // power down LNA
_DINT();
@ -222,19 +220,18 @@ cc1020_set_tx(void)
}
void
cc1020_set_receiver(void (*recv) (void))
cc1020_set_receiver(void (*recv)(void))
{
printf("cc1020_set_receiver\n");
receiver_callback = recv;
}
__inline void
void
cc1020_set_power_mode(enum cc1020_power_mode mode)
{
cc1020_power_mode = mode;
}
__inline void
void
cc1020_set_power(u8_t pa_power)
{
cc1020_pa_power = pa_power;
@ -260,7 +257,7 @@ cc1020_read(u8_t *buf, unsigned int bufsize)
return 0;
}
__inline u8_t
u8_t
cc1020_get_rssi(void)
{
return rssi;
@ -276,8 +273,7 @@ cc1020_send(u8_t *buf, unsigned int len)
if (cc1020_txlen > 0)
return 0;
// prefix
// (preamble+syncword are already in buffer)
/* The preamble and the sync word are already in buffer. */
cc1020_txlen = PREAMBLESIZE + SYNCWDSIZE;
// header
@ -288,8 +284,8 @@ cc1020_send(u8_t *buf, unsigned int len)
cc1020_txlen += len;
// suffix
cc1020_txbuf[cc1020_txlen++] = 0xFA;
cc1020_txbuf[cc1020_txlen++] = 0xFA;
cc1020_txbuf[cc1020_txlen++] = TAIL;
cc1020_txbuf[cc1020_txlen++] = TAIL;
process_poll(&cc1020_sender_process);
@ -318,7 +314,6 @@ interrupt(UART0RX_VECTOR) cc1020_rxhandler(void)
shiftbuf.b2 = shiftbuf.b3;
shiftbuf.b3 = shiftbuf.b4;
shiftbuf.b4 = RXBUF0;
if (shiftbuf.i1 == 0xAAD3 && shiftbuf.i2 == 0x9100) {
// 0 AA D3 91 00 | FF 00 |
syncbs = 0;
@ -348,9 +343,10 @@ interrupt(UART0RX_VECTOR) cc1020_rxhandler(void)
return;
}
cc1020_rxstate = CC1020_RX_RECEIVE;
// Signal "Channel busy"
// Update RSSI.
rssi = cc1020_read_reg(CC1020_RSS);
cc1020_rxstate = CC1020_RX_RECEIVE;
break;
case CC1020_RX_RECEIVE:
if (syncbs == 0) {
@ -360,30 +356,29 @@ interrupt(UART0RX_VECTOR) cc1020_rxhandler(void)
shiftbuf.b4 = RXBUF0;
if (syncbs < 0) {
shiftbuf.i1 = shiftbuf.i2 << -syncbs;
cc1020_rxbuf[cc1020_rxlen] = shiftbuf.b1;
shiftbuf.i1 = shiftbuf.i2 << -syncbs;
cc1020_rxbuf[cc1020_rxlen] = shiftbuf.b1;
} else {
shiftbuf.i1 = shiftbuf.i2 >> syncbs;
cc1020_rxbuf[cc1020_rxlen] = shiftbuf.b2;
shiftbuf.i1 = shiftbuf.i2 >> syncbs;
cc1020_rxbuf[cc1020_rxlen] = shiftbuf.b2;
}
}
cc1020_rxlen++;
if (cc1020_rxlen > HDRSIZE) {
if (cc1020_rxlen == ((struct cc1020_header *) cc1020_rxbuf)->length) {
// disable receiver
DISABLE_RX_IRQ();
cc1020_rxstate = CC1020_RX_PROCESSING;
printf("read %u bytes.\n", cc1020_rxlen);
// disable receiver
DISABLE_RX_IRQ();
cc1020_rxstate = CC1020_RX_PROCESSING;
// call receiver to copy from buffer
if (receiver_callback != NULL)
receiver_callback();
// call receiver to copy from buffer
if (receiver_callback != NULL)
receiver_callback();
// reset receiver
cc1020_rxlen = 0;
cc1020_rxstate = CC1020_RX_SEARCHING;
ENABLE_RX_IRQ();
// reset receiver
cc1020_rxlen = 0;
cc1020_rxstate = CC1020_RX_SEARCHING;
ENABLE_RX_IRQ();
}
}
break;

14
platform/msb430/dev/cc1020.h
View File

@ -60,15 +60,15 @@ extern const u8_t cc1020_config_115200[];
void cc1020_init(const u8_t* config);
int cc1020_on();
int cc1020_on(void);
void cc1020_set_rx();
void cc1020_set_rx(void);
void cc1020_set_tx();
void cc1020_set_tx(void);
void cc1020_off();
void cc1020_off(void);
void cc1020_set_receiver(void (* recv)(void));
void cc1020_set_receiver(void (*recv)(void));
void cc1020_set_power_mode(enum cc1020_power_mode mode);
@ -86,9 +86,9 @@ unsigned int cc1020_read(u8_t *buf, unsigned int bufsize);
*
* Best to call in packet handler
*/
u8_t cc1020_get_rssi();
u8_t cc1020_get_rssi(void);
unsigned int cc1020_send(u8_t* buf, unsigned int bufsize);
unsigned int cc1020_send(u8_t *buf, unsigned int bufsize);
extern const struct radio_driver cc1020_driver;

2
platform/msb430/dev/dma.c
View File

@ -69,7 +69,7 @@ interrupt(DACDMA_VECTOR) irq_dacdma(void)
}
void
dma_transfer(char *buf, unsigned len)
dma_transfer(unsigned char *buf, unsigned len)
{
// Configure DMA Channel 0 for UART0 TXIFG.
DMACTL0 = DMA0TSEL_4;

4
platform/msb430/dev/dma.h
View File

@ -28,12 +28,12 @@
*
* This file is part of the Contiki operating system.
*
* $Id: dma.h,v 1.2 2007/06/28 14:41:17 nvt-se Exp $
* $Id: dma.h,v 1.3 2007/07/05 08:35:13 nvt-se Exp $
*/
#ifndef DMA_H
#define DMA_H
void dma_transfer(char *, unsigned);
void dma_transfer(unsigned char *, unsigned);
#endif

4
platform/msb430/msb430-slip-arch.c
View File

@ -7,7 +7,7 @@
void
slip_arch_writeb(unsigned char c)
{
rs232_send(c);
rs232_send(c);
}
/*---------------------------------------------------------------------------*/
@ -52,5 +52,5 @@ putchar(int c)
void
slip_arch_init(unsigned long ubr)
{
rs232_set_input(slip_input_byte);
rs232_set_input(slip_input_byte);
}