giomba
/
nes-proj
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Code style fixes: cc2430

This commit is contained in:
George Oikonomou 2012-12-16 12:44:44 +00:00
parent b4bb51e811
commit 874bec26a5
16 changed files with 99 additions and 102 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
cpu/cc2430/dev/bus.c
View File

@ -44,7 +44,7 @@
/*---------------------------------------------------------------------------*/
void
bus_init (void)
bus_init(void)
{
CLKCON = (0x00 | OSC32K); /* 32k internal */
while(CLKCON != (0x00 | OSC32K));

53
cpu/cc2430/dev/cc2430_rf.c
View File

@ -263,7 +263,7 @@ cc2430_rf_set_addr(unsigned pan, unsigned addr, const uint8_t *ieee_addr)
if(ieee_addr != NULL) {
ptr = &IEEE_ADDR7;
/* LSB first, MSB last for 802.15.4 addresses in CC2420 */
for (f = 0; f < 8; f++) {
for(f = 0; f < 8; f++) {
*ptr-- = ieee_addr[f];
}
}
@ -396,10 +396,10 @@ prepare(const void *payload, unsigned short payload_len)
PRINTF("cc2430_rf: data = ");
/* Send the phy length byte first */
RFD = payload_len + CHECKSUM_LEN; /* Payload plus FCS */
PRINTF("(%d)", payload_len+CHECKSUM_LEN);
PRINTF("(%d)", payload_len + CHECKSUM_LEN);
for(i = 0; i < payload_len; i++) {
RFD = ((unsigned char*) (payload))[i];
PRINTF("%02X", ((unsigned char*)(payload))[i]);
RFD = ((unsigned char *)(payload))[i];
PRINTF("%02X", ((unsigned char *)(payload))[i]);
}
PRINTF("\n");
@ -460,7 +460,7 @@ transmit(unsigned short transmit_len)
ENERGEST_OFF(ENERGEST_TYPE_TRANSMIT);
ENERGEST_ON(ENERGEST_TYPE_LISTEN);
if(rf_flags & WAS_OFF){
if(rf_flags & WAS_OFF) {
off();
}
@ -510,7 +510,7 @@ read(void *buf, unsigned short bufsize)
}
if(len <= CC2430_MIN_PACKET_LEN) {
PRINTF("error: too short\n");
PRINTF("error: too short\n");
RIMESTATS_ADD(tooshort);
flush_rx();
@ -518,7 +518,7 @@ read(void *buf, unsigned short bufsize)
}
if(len - CHECKSUM_LEN > bufsize) {
PRINTF("error: too long\n");
PRINTF("error: too long\n");
RIMESTATS_ADD(toolong);
flush_rx();
@ -538,11 +538,11 @@ read(void *buf, unsigned short bufsize)
PRINTF("(%d)", len);
len -= CHECKSUM_LEN;
for(i = 0; i < len; ++i) {
((unsigned char*)(buf))[i] = RFD;
((unsigned char *)(buf))[i] = RFD;
#if CC2430_RF_CONF_HEXDUMP
uart1_writeb(((unsigned char*)(buf))[i]);
uart1_writeb(((unsigned char *)(buf))[i]);
#endif
PRINTF("%02X", ((unsigned char*)(buf))[i]);
PRINTF("%02X", ((unsigned char *)(buf))[i]);
}
PRINTF("\n");
@ -570,17 +570,17 @@ read(void *buf, unsigned short bufsize)
RIMESTATS_ADD(badcrc);
flush_rx();
return 0;
}
}
/* If FIFOP==1 and FIFO==0 then we had a FIFO overflow at some point. */
if((RFSTATUS & (FIFO | FIFOP)) == FIFOP) {
/*
* If we reach here means that there might be more intact packets in the
* FIFO despite the overflow. This can happen with bursts of small packets.
*
*
* Only flush if the FIFO is actually empty. If not, then next pass we will
* pick up one more packet or flush due to an error.
*/
*/
if(!RXFIFOCNT) {
flush_rx();
}
@ -646,14 +646,14 @@ on(void)
RSSIH = 0xd2; /* -84dbm = 0xd2 default, 0xe0 -70 dbm */
RFPWR &= ~RREG_RADIO_PD; /* make sure it's powered */
while ((RFIF & IRQ_RREG_ON) == 0); /* wait for power up */
while((RFIF & IRQ_RREG_ON) == 0); /* wait for power up */
/* Make sure the RREG On Interrupt Flag is 0 next time we get called */
RFIF &= ~IRQ_RREG_ON;
cc2430_rf_command(ISRXON);
cc2430_rf_command(ISFLUSHRX);
while (RTIMER_CLOCK_LT(RTIMER_NOW(), t0 + ONOFF_TIME));
while(RTIMER_CLOCK_LT(RTIMER_NOW(), t0 + ONOFF_TIME));
}
PRINTF("cc2430_rf_rx_enable done\n");
@ -686,18 +686,17 @@ off(void)
return 1;
}
/*---------------------------------------------------------------------------*/
const struct radio_driver cc2430_rf_driver =
{
init,
prepare,
transmit,
send,
read,
channel_clear,
receiving_packet,
pending_packet,
on,
off,
const struct radio_driver cc2430_rf_driver = {
init,
prepare,
transmit,
send,
read,
channel_clear,
receiving_packet,
pending_packet,
on,
off,
};
/*---------------------------------------------------------------------------*/
#if !NETSTACK_CONF_SHORTCUTS

21
cpu/cc2430/dev/cc2430_rf.h
View File

@ -16,15 +16,14 @@
#endif
/* Constants */
typedef enum rf_address_mode_t
{
RF_DECODER_NONE = 0,
RF_DECODER_COORDINATOR,
RF_SOFTACK_MONITOR,
RF_MONITOR,
RF_SOFTACK_CLIENT,
RF_DECODER_ON
}rf_address_mode_t;
typedef enum rf_address_mode_t {
RF_DECODER_NONE = 0,
RF_DECODER_COORDINATOR,
RF_SOFTACK_MONITOR,
RF_MONITOR,
RF_SOFTACK_CLIENT,
RF_DECODER_ON
} rf_address_mode_t;
/*CSP command set*/
#define SSTOP 0xDF
@ -79,10 +78,10 @@ uint8_t cc2430_rf_power_set(uint8_t new_power);
void cc2430_rf_set_addr(unsigned pan, unsigned addr, const uint8_t *ieee_addr);
#if !NETSTACK_CONF_SHORTCUTS
extern void cc2430_rf_ISR( void ) __interrupt (RF_VECTOR);
extern void cc2430_rf_ISR(void) __interrupt(RF_VECTOR);
#endif
#if CC2430_RFERR_INTERRUPT
extern void cc2430_rf_error_ISR( void ) __interrupt (RFERR_VECTOR);
extern void cc2430_rf_error_ISR(void) __interrupt(RFERR_VECTOR);
#endif
#ifdef HAVE_RF_DMA

10
cpu/cc2430/dev/cc2430_rf_intr.c
View File

@ -61,7 +61,7 @@ PROCESS_NAME(cc2430_rf_process);
#pragma exclude bits
#endif
void
cc2430_rf_ISR( void ) __interrupt (RF_VECTOR)
cc2430_rf_ISR(void) __interrupt(RF_VECTOR)
{
EA = 0;
ENERGEST_ON(ENERGEST_TYPE_IRQ);
@ -70,9 +70,9 @@ cc2430_rf_ISR( void ) __interrupt (RF_VECTOR)
* Just double check the flag.
*/
if(RFIF & IRQ_FIFOP) {
RF_RX_LED_ON();
/* Poll the RF process which calls cc2430_rf_read() */
process_poll(&cc2430_rf_process);
RF_RX_LED_ON();
/* Poll the RF process which calls cc2430_rf_read() */
process_poll(&cc2430_rf_process);
}
S1CON &= ~(RFIF_0 | RFIF_1);
@ -92,7 +92,7 @@ cc2430_rf_ISR( void ) __interrupt (RF_VECTOR)
#pragma exclude bits
#endif
void
cc2430_rf_error_ISR( void ) __interrupt (RFERR_VECTOR)
cc2430_rf_error_ISR(void) __interrupt(RFERR_VECTOR)
{
EA = 0;
TCON_RFERRIF = 0;

32
cpu/cc2430/dev/clock.c
View File

@ -98,14 +98,14 @@ clock_init(void)
CLKCON = OSC32K | TICKSPD2 | TICKSPD1; /* tickspeed 500 kHz for timers[1-4] */
/* Initialize tick value */
timer_value = ST0; /* ST low bits [7:0] */
timer_value += ((unsigned long int) ST1) << 8; /* middle bits [15:8] */
timer_value += ((unsigned long int) ST2) << 16; /* high bits [23:16] */
timer_value += TICK_VAL; /* Init value 256 */
ST2 = (unsigned char) (timer_value >> 16);
ST1 = (unsigned char) (timer_value >> 8);
ST0 = (unsigned char) timer_value;
timer_value = ST0; /* ST low bits [7:0] */
timer_value += ((unsigned long int)ST1) << 8; /* middle bits [15:8] */
timer_value += ((unsigned long int)ST2) << 16; /* high bits [23:16] */
timer_value += TICK_VAL; /* Init value 256 */
ST2 = (unsigned char)(timer_value >> 16);
ST1 = (unsigned char)(timer_value >> 8);
ST0 = (unsigned char)timer_value;
IEN0_STIE = 1; /* IEN0.STIE acknowledge Sleep Timer Interrupt */
}
/*---------------------------------------------------------------------------*/
@ -131,15 +131,15 @@ clock_ISR(void) __interrupt(ST_VECTOR)
* Next interrupt occurs after the current time + TICK_VAL
*/
timer_value = ST0;
timer_value += ((unsigned long int) ST1) << 8;
timer_value += ((unsigned long int) ST2) << 16;
timer_value += ((unsigned long int)ST1) << 8;
timer_value += ((unsigned long int)ST2) << 16;
timer_value += TICK_VAL;
ST2 = (unsigned char) (timer_value >> 16);
ST1 = (unsigned char) (timer_value >> 8);
ST0 = (unsigned char) timer_value;
ST2 = (unsigned char)(timer_value >> 16);
ST1 = (unsigned char)(timer_value >> 8);
ST0 = (unsigned char)timer_value;
++count;
/* Make sure the CLOCK_CONF_SECOND is a power of two, to ensure
that the modulo operation below becomes a logical and and not
an expensive divide. Algorithm from Wikipedia:
@ -160,7 +160,7 @@ clock_ISR(void) __interrupt(ST_VECTOR)
etimer_request_poll();
}
#endif
IRCON_STIF = 0;
ENERGEST_OFF(ENERGEST_TYPE_IRQ);
ENABLE_INTERRUPTS();

8
cpu/cc2430/dev/dma.c
View File

@ -16,7 +16,7 @@
#if DMA_ON
struct dma_config dma_conf[DMA_CHANNEL_COUNT]; /* DMA Descriptors */
struct process * dma_callback[DMA_CHANNEL_COUNT];
struct process *dma_callback[DMA_CHANNEL_COUNT];
/*---------------------------------------------------------------------------*/
void
dma_init(void)
@ -30,7 +30,7 @@ dma_init(void)
}
/* The address of the descriptor for Channel 0 is configured separately */
tmp_ptr = (uint16_t) &(dma_conf[0]);
tmp_ptr = (uint16_t)&(dma_conf[0]);
DMA0CFGH = tmp_ptr >> 8;
DMA0CFGL = tmp_ptr;
@ -40,7 +40,7 @@ dma_init(void)
* derived by the SoC
*/
#if (DMA_CHANNEL_COUNT > 1)
tmp_ptr = (uint16_t) &(dma_conf[1]);
tmp_ptr = (uint16_t)&(dma_conf[1]);
DMA1CFGH = tmp_ptr >> 8;
DMA1CFGL = tmp_ptr;
#endif
@ -53,7 +53,7 @@ dma_init(void)
* completes, the ISR will poll this process.
*/
void
dma_associate_process(struct process * p, uint8_t c)
dma_associate_process(struct process *p, uint8_t c)
{
if((!c) || (c >= DMA_CHANNEL_COUNT)) {
return;

4
cpu/cc2430/dev/dma.h
View File

@ -138,11 +138,11 @@ extern dma_config_t dma_conf[DMA_CHANNEL_COUNT];
/* Functions Declarations */
void dma_init(void);
void dma_associate_process (struct process * p, uint8_t c);
void dma_associate_process(struct process *p, uint8_t c);
/* Only link the ISR when DMA_ON is .... on */
#if DMA_ON
void dma_ISR( void ) __interrupt (DMA_VECTOR);
void dma_ISR(void) __interrupt(DMA_VECTOR);
#endif
#endif /*__DMA_H*/

8
cpu/cc2430/dev/dma_intr.c
View File

@ -16,7 +16,7 @@
#include "cc2430_sfr.h"
#if DMA_ON
extern struct process * dma_callback[DMA_CHANNEL_COUNT];
extern struct process *dma_callback[DMA_CHANNEL_COUNT];
#endif
/*---------------------------------------------------------------------------*/
@ -37,17 +37,17 @@ extern void spi_rx_dma_callback(void);
#pragma exclude bits
#endif
void
dma_ISR(void) __interrupt (DMA_VECTOR)
dma_ISR(void) __interrupt(DMA_VECTOR)
{
#if DMA_ON
uint8_t i;
#endif
EA=0;
EA = 0;
IRCON_DMAIF = 0;
#ifdef HAVE_RF_DMA
if((DMAIRQ & 1) != 0) {
DMAIRQ &= ~1;
DMAARM=0x81;
DMAARM = 0x81;
rf_dma_callback_isr();
}
#endif

8
cpu/cc2430/dev/uart0.h
View File

@ -20,12 +20,12 @@
void uart0_init();
void uart0_writeb(uint8_t byte);
void uart0_set_input(int (*input)(unsigned char c));
void uart0_set_input(int (* input)(unsigned char c));
void uart0_rx_ISR( void ) __interrupt (URX0_VECTOR);
void uart0_tx_ISR( void ) __interrupt (UTX0_VECTOR);
void uart0_rx_ISR(void) __interrupt(URX0_VECTOR);
void uart0_tx_ISR(void) __interrupt(UTX0_VECTOR);
/* Macro to turn on / off UART RX Interrupt */
#define UART0_RX_INT(v) IEN0_URX0IE = v
#define UART0_RX_INT(v) do { IEN0_URX0IE = v; } while(0)
#endif
#endif /* UART_0_H */

6
cpu/cc2430/dev/uart1.h
View File

@ -22,10 +22,10 @@ void uart1_writeb(uint8_t byte);
void uart1_set_input(int (*input)(unsigned char c));
#if UART_ONE_CONF_WITH_INPUT
void uart1_rx_ISR( void ) __interrupt (URX1_VECTOR);
void uart1_tx_ISR( void ) __interrupt (UTX1_VECTOR);
void uart1_rx_ISR(void) __interrupt(URX1_VECTOR);
void uart1_tx_ISR(void) __interrupt(UTX1_VECTOR);
/* Macro to turn on / off UART RX Interrupt */
#define UART1_RX_INT(v) IEN0_URX1IE = v
#define UART1_RX_INT(v) do { IEN0_URX1IE = v; } while(0)
#else
#define UART1_RX_INT(v)
#endif /* UART_ONE_CONF_WITH_INPUT */

16
cpu/cc2430/dev/uart_intr.c
View File

@ -21,16 +21,16 @@
#include "sys/energest.h"
#if UART_ZERO_ENABLE
static int (*uart0_input_handler)(unsigned char c);
static int (* uart0_input_handler)(unsigned char c);
#endif
#if UART_ONE_ENABLE
static int (*uart1_input_handler)(unsigned char c);
static int (* uart1_input_handler)(unsigned char c);
#endif
#if UART_ZERO_ENABLE
/*---------------------------------------------------------------------------*/
void
uart0_set_input(int (*input)(unsigned char c))
uart0_set_input(int (* input)(unsigned char c))
{
uart0_input_handler = input;
}
@ -41,7 +41,7 @@ uart0_set_input(int (*input)(unsigned char c))
#pragma exclude bits
#endif
void
uart0_rx_ISR(void) __interrupt (URX0_VECTOR)
uart0_rx_ISR(void) __interrupt(URX0_VECTOR)
{
ENERGEST_ON(ENERGEST_TYPE_IRQ);
TCON_URX0IF = 0;
@ -52,7 +52,7 @@ uart0_rx_ISR(void) __interrupt (URX0_VECTOR)
}
/*---------------------------------------------------------------------------*/
void
uart0_tx_ISR( void ) __interrupt (UTX0_VECTOR)
uart0_tx_ISR(void) __interrupt(UTX0_VECTOR)
{
}
#pragma restore
@ -60,7 +60,7 @@ uart0_tx_ISR( void ) __interrupt (UTX0_VECTOR)
#if UART_ONE_ENABLE
/*---------------------------------------------------------------------------*/
void
uart1_set_input(int (*input)(unsigned char c))
uart1_set_input(int (* input)(unsigned char c))
{
uart1_input_handler = input;
}
@ -71,7 +71,7 @@ uart1_set_input(int (*input)(unsigned char c))
#pragma exclude bits
#endif
void
uart1_rx_ISR(void) __interrupt (URX1_VECTOR)
uart1_rx_ISR(void) __interrupt(URX1_VECTOR)
{
ENERGEST_ON(ENERGEST_TYPE_IRQ);
TCON_URX1IF = 0;
@ -82,7 +82,7 @@ uart1_rx_ISR(void) __interrupt (URX1_VECTOR)
}
/*---------------------------------------------------------------------------*/
void
uart1_tx_ISR( void ) __interrupt (UTX1_VECTOR)
uart1_tx_ISR(void) __interrupt(UTX1_VECTOR)
{
}
#pragma restore

2
cpu/cc2430/dev/watchdog-cc2430.c
View File

@ -52,7 +52,7 @@
#pragma exclude bits
#endif
void
cc4230_watchdog_ISR(void) __interrupt (WDT_VECTOR)
cc4230_watchdog_ISR(void) __interrupt(WDT_VECTOR)
{
EA = 0;
ENERGEST_ON(ENERGEST_TYPE_IRQ);

21
cpu/cc2430/mtarch.h
View File

@ -29,16 +29,16 @@
*
*/
/*
* \file
* Stub header file for cc2430 multi-threading. It doesn't do anything, it
* just exists so that mt.c can compile cleanly.
*
* This is based on the original mtarch.h for z80 by Takahide Matsutsuka
*
* \author
* George Oikonomou - <oikonomou@users.sourceforge.net>
*/
/*
* \file
* Stub header file for cc2430 multi-threading. It doesn't do anything, it
* just exists so that mt.c can compile cleanly.
*
* This is based on the original mtarch.h for z80 by Takahide Matsutsuka
*
* \author
* George Oikonomou - <oikonomou@users.sourceforge.net>
*/
#ifndef __MTARCH_H__
#define __MTARCH_H__
@ -47,4 +47,3 @@ struct mtarch_thread {
};
#endif /* __MTARCH_H__ */

6
cpu/cc2430/rtimer-arch.c
View File

@ -95,8 +95,8 @@ rtimer_arch_schedule(rtimer_clock_t t)
PRINTF("rtimer_arch_schedule(%u)\n", t);
/* set the compare mode values so we can get an interrupt after t */
T1CC1L = (unsigned char) t;
T1CC1H = (unsigned char) (t >> 8);
T1CC1L = (unsigned char)t;
T1CC1H = (unsigned char)(t >> 8);
PRINTF("T1CC1=%u, t=%u\n", (T1CC1L + (T1CC1H << 8)), t);
/* Turn on compare mode interrupt */
@ -109,7 +109,7 @@ rtimer_arch_schedule(rtimer_clock_t t)
#pragma exclude bits
#endif
void
cc2430_timer_1_ISR(void) __interrupt (T1_VECTOR)
cc2430_timer_1_ISR(void) __interrupt(T1_VECTOR)
{
IEN1_T1IE = 0; /* Ignore Timer 1 Interrupts */
ENERGEST_ON(ENERGEST_TYPE_IRQ);

2
cpu/cc2430/rtimer-arch.h
View File

@ -57,6 +57,6 @@
#define rtimer_arch_now() ((rtimer_clock_t)(T1CNTL + (T1CNTH << 8)))
void cc2430_timer_1_ISR(void) __interrupt (T1_VECTOR);
void cc2430_timer_1_ISR(void) __interrupt(T1_VECTOR);
#endif /* __RTIMER_ARCH_H__ */

2
cpu/cc2430/stack.c
View File

@ -60,7 +60,7 @@ poison_loop:
uint8_t
stack_get_max(void)
{
__data uint8_t * sp = (__data uint8_t *) 0xff;
__data uint8_t *sp = (__data uint8_t *)0xff;
uint8_t free = 0;
while(*sp-- == STACK_POISON) {