giomba/nes-proj
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Allow to use up to 6xADC channels (now hardcoded), disabling the user button

Browse Source 
(PA3) if ADC6 is enabled
This commit is contained in:
Toni Lozano 2016-04-04 10:48:43 +02:00
parent fb31d8d641
commit a81b4007b0
7 changed files with 210 additions and 54 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
platform/zoul/contiki-main.c
View File

@ -218,9 +218,9 @@ main(void)
#endif /* NETSTACK_CONF_WITH_IPV6 */
process_start(&sensors_process, NULL);
#if PLATFOM_HAS_BUTTON
SENSORS_ACTIVATE(button_sensor);
#endif
energest_init();
ENERGEST_ON(ENERGEST_TYPE_CPU);

2
platform/zoul/dev/adc-sensors.c
View File

@ -175,7 +175,7 @@ configure(int type, int value)
return ADC_WRAPPER_ERROR;
}
if((value < 0x01) || (value > 0x07) || (value == BUTTON_USER_PIN)) {
if((value < 0x01) || (value > 0x07) || ((value == BUTTON_USER_PIN) && (ADC_SENSORS_ADC6_PIN < 0))) {
PRINTF("ADC sensors: invalid pin value, (PA0-PA1, PA3) are reserved\n");
return ADC_WRAPPER_ERROR;
}

8
platform/zoul/dev/adc-zoul.c
View File

@ -93,6 +93,9 @@ get_channel_pin(int type)
if((ZOUL_SENSORS_ADC5) && (type == ZOUL_SENSORS_ADC5)) {
return SOC_ADC_ADCCON_CH_AIN0 + ADC_SENSORS_ADC5_PIN;
}
if((ZOUL_SENSORS_ADC6) && (type == ZOUL_SENSORS_ADC6)) {
return SOC_ADC_ADCCON_CH_AIN0 + ADC_SENSORS_ADC6_PIN;
}
return ZOUL_SENSORS_ERROR;
}
/*---------------------------------------------------------------------------*/
@ -154,9 +157,12 @@ configure(int type, int value)
if(value & ZOUL_SENSORS_ADC5) {
ioc_set_over(GPIO_A_NUM, ADC_SENSORS_ADC5_PIN, IOC_OVERRIDE_ANA);
}
if(value & ZOUL_SENSORS_ADC6) {
ioc_set_over(GPIO_A_NUM, ADC_SENSORS_ADC6_PIN, IOC_OVERRIDE_ANA);
}
adc_init();
set_decimation_rate(SOC_ADC_ADCCON_DIV_512);
enabled_channels = value;
enabled_channels += value;
break;
case ZOUL_SENSORS_CONFIGURE_TYPE_DECIMATION_RATE:

14
platform/zoul/dev/adc-zoul.h
View File

@ -38,7 +38,9 @@
*
* Driver for the Zoul ADC interface
*
* This driver supports analogue sensors connected to ADC1, ADC2 and AND3 inputs
* This driver supports analogue sensors connected to ADC1, ADC2, ADC3,
* ADC4, ADC5 and ADC6 inputs. ADC6 is shared with the user button, so disable
* user button if ADC6 is needed.
* This is controlled by the type argument of the value() function. Possible
* choices are:
*
@ -47,6 +49,7 @@
* - ZOUL_SENSORS_ADC3
* - ZOUL_SENSORS_ADC4
* - ZOUL_SENSORS_ADC5
* - ZOUL_SENSORS_ADC6
*
* To initialize the ADC sensors use the configure() function, using as first
* argument SENSORS_HW_INIT, and choose which ADC channels to enable passing as
@ -128,13 +131,20 @@
#else
#define ZOUL_SENSORS_ADC5 0
#endif
/* ADC phidget-like connector ADC6 */
#if ADC_SENSORS_ADC6_PIN >= ZOUL_SENSORS_ADC_MIN
#define ZOUL_SENSORS_ADC6 GPIO_PIN_MASK(ADC_SENSORS_ADC6_PIN)
#else
#define ZOUL_SENSORS_ADC6 0
#endif
/*
* This is safe as the disabled sensors should have a zero value thus not
* affecting the mask operations
*/
#define ZOUL_SENSORS_ADC_ALL (ZOUL_SENSORS_ADC1 + ZOUL_SENSORS_ADC2 + \
ZOUL_SENSORS_ADC3 + ZOUL_SENSORS_ADC4 + \
ZOUL_SENSORS_ADC5)
ZOUL_SENSORS_ADC5 + ZOUL_SENSORS_ADC6)
/** @} */
/*---------------------------------------------------------------------------*/
extern const struct sensors_sensor adc_zoul;

7
platform/zoul/dev/zoul-sensors.c
View File

@ -47,7 +47,12 @@
#include <string.h>
/*---------------------------------------------------------------------------*/
/** \brief Exports global symbols for the sensor API */
SENSORS(&button_sensor, &vdd3_sensor, &cc2538_temp_sensor);
SENSORS(&vdd3_sensor,
#if PLATFORM_HAS_BUTTON
&button_sensor,
#endif
&cc2538_temp_sensor
);
/*---------------------------------------------------------------------------*/
/**
* @}

122
platform/zoul/firefly/board.h
View File

@ -168,6 +168,92 @@
#define UART1_RTS_PIN (-1) /**< 0 */
/** @} */
/*---------------------------------------------------------------------------*/
/**
* \name ADC configuration
*
* These values configure which CC2538 pins and ADC channels to use for the ADC
* inputs. There pins are suggested as they can be changed, but note that only
* pins from PA can be configured as ADC.
*
* - ADC1: up to 3.3V.
* - ADC2: up to 3.3V.
* - ADC3: up to 3.3V.
* - ADC4: up to 3.3V.
* - ADC5: up to 3.3V.
* - ADC6: up to 3.3V, shared with user button.
*
* Only ADC1 and ADC3 are enabled as default.
*
* The internal ADC reference is 1190mV, use either a voltage divider as input,
* or a different voltage reference, like AVDD5 or other externally (AIN7 or
* AIN6).
* @{
*/
#define ADC_SENSORS_PORT GPIO_A_NUM /**< ADC GPIO control port */
#ifndef ADC_SENSORS_CONF_ADC1_PIN
#define ADC_SENSORS_ADC1_PIN 5 /**< ADC1 to PA5 */
#else
#if ((ADC_SENSORS_CONF_ADC1_PIN != -1) && (ADC_SENSORS_CONF_ADC1_PIN != 5))
#error "ADC1 channel should be mapped to PA5 or disabled with -1"
#else
#define ADC_SENSORS_ADC1_PIN ADC_SENSORS_CONF_ADC1_PIN
#endif
#endif
#ifndef ADC_SENSORS_CONF_ADC2_PIN
#define ADC_SENSORS_ADC2_PIN 4 /**< ADC2 to PA4 */
#else
#if ((ADC_SENSORS_CONF_ADC2_PIN != -1) && (ADC_SENSORS_CONF_ADC2_PIN != 4))
#error "ADC2 channel should be mapped to PA4 or disabled with -1"
#else
#define ADC_SENSORS_ADC2_PIN ADC_SENSORS_CONF_ADC2_PIN
#endif
#endif
#ifndef ADC_SENSORS_CONF_ADC3_PIN
#define ADC_SENSORS_ADC3_PIN 2 /**< ADC3 to PA2 */
#else
#if ((ADC_SENSORS_CONF_ADC3_PIN != -1) && (ADC_SENSORS_CONF_ADC3_PIN != 2))
#error "ADC3 channel should be mapped to PA2 or disabled with -1"
#else
#define ADC_SENSORS_ADC3_PIN ADC_SENSORS_CONF_ADC3_PIN
#endif
#endif
#ifndef ADC_SENSORS_CONF_ADC4_PIN
#define ADC_SENSORS_ADC4_PIN 6 /**< ADC4 to PA6 */
#else
#if ((ADC_SENSORS_CONF_ADC4_PIN != -1) && (ADC_SENSORS_CONF_ADC4_PIN != 6))
#error "ADC4 channel should be mapped to PA6 or disabled with -1"
#else
#define ADC_SENSORS_ADC4_PIN ADC_SENSORS_CONF_ADC4_PIN
#endif
#endif
#ifndef ADC_SENSORS_CONF_ADC5_PIN
#define ADC_SENSORS_ADC5_PIN 7 /**< ADC5 to PA7 */
#else
#if ((ADC_SENSORS_CONF_ADC5_PIN != -1) && (ADC_SENSORS_CONF_ADC5_PIN != 7))
#error "ADC5 channel should be mapped to PA7 or disabled with -1"
#else
#define ADC_SENSORS_ADC5_PIN ADC_SENSORS_CONF_ADC5_PIN
#endif
#endif
#ifndef ADC_SENSORS_CONF_ADC6_PIN
#define ADC_SENSORS_ADC6_PIN (-1) /**< ADC6 not declared */
#else
#define ADC_SENSORS_ADC6_PIN 3 /**< Hard-coded to PA3 */
#endif
#ifndef ADC_SENSORS_CONF_MAX
#define ADC_SENSORS_MAX 5 /**< Maximum sensors */
#else
#define ADC_SENSORS_MAX ADC_SENSORS_CONF_MAX
#endif
/** @} */
/*---------------------------------------------------------------------------*/
/** \name Firefly Button configuration
*
* Buttons on the Firefly are connected as follows:
@ -180,31 +266,19 @@
#define BUTTON_USER_PIN 3
#define BUTTON_USER_VECTOR NVIC_INT_GPIO_PORT_A
/* Notify various examples that we have Buttons */
#define PLATFORM_HAS_BUTTON 1
/** @} */
/*---------------------------------------------------------------------------*/
/**
* \name ADC configuration
*
* These values configure which CC2538 pins and ADC channels to use for the ADC
* inputs. There pins are suggested as they can be changed, but note that only
* pins from PA can be configured as ADC.
*
* The Firefly, as it is, only allows 3.3VDC sensors.
*
* The internal ADC reference is 1190mV, use either a voltage divider as input,
* or a different voltage reference, like AVDD5 or other externally (AIN7 or
* AIN6).
* @{
/* Notify various examples that we have an user button.
* If ADC6 channel is used, then disable the user button
*/
#define ADC_SENSORS_PORT GPIO_A_NUM /**< ADC GPIO control port */
#define ADC_SENSORS_ADC1_PIN 5 /**< ADC1 to PA5, 3V3 */
#define ADC_SENSORS_ADC2_PIN 4 /**< ADC2 to PA4, 3V3 */
#define ADC_SENSORS_ADC3_PIN 2 /**< ADC3 to PA2, 3V3 */
#define ADC_SENSORS_ADC4_PIN 6 /**< ADC4 to PA6, 3V3 */
#define ADC_SENSORS_ADC5_PIN 7 /**< ADC5 to PA7, 3V3 */
#define ADC_SENSORS_MAX 5 /**< PA2, PA4, PA5, PA6, PA7 */
#ifdef PLATFORM_CONF_WITH_BUTTON
#if (PLATFORM_CONF_WITH_BUTTON && (ADC_SENSORS_ADC6_PIN == 3))
#error "The ADC6 (PA3) and user button cannot be enabled at the same time"
#else
#define PLATFORM_HAS_BUTTON (PLATFORM_CONF_WITH_BUTTON && \
!(ADC_SENSORS_ADC6_PIN == 3))
#endif /* (PLATFORM_CONF_WITH_BUTTON && (ADC_SENSORS_ADC6_PIN == 3)) */
#else
#define PLATFORM_HAS_BUTTON !(ADC_SENSORS_ADC6_PIN == 3)
#endif /* PLATFORM_CONF_WITH_BUTTON */
/** @} */
/*---------------------------------------------------------------------------*/
/**

107
platform/zoul/remote/board.h
View File

@ -171,23 +171,6 @@
#define UART1_RTS_PIN (-1)
/** @} */
/*---------------------------------------------------------------------------*/
/** \name RE-Mote Button configuration
*
* Buttons on the RE-Mote are connected as follows:
* - BUTTON_USER -> PA3, S1 user button, shared with bootloader and RTC_INT1
* - BUTTON_RESET -> RESET_N line, S2 reset both CC2538 and CoP
* - BUTTON_PIC1W -> shared with SHUTDOWN_ENABLE, not mounted.
* @{
*/
/** BUTTON_USER -> PA3 */
#define BUTTON_USER_PORT GPIO_A_NUM
#define BUTTON_USER_PIN 3
#define BUTTON_USER_VECTOR NVIC_INT_GPIO_PORT_A
/* Notify various examples that we have Buttons */
#define PLATFORM_HAS_BUTTON 1
/** @} */
/*---------------------------------------------------------------------------*/
/**
* \name ADC configuration
*
@ -201,6 +184,12 @@
* - ADC2: up to 3.3V, shared with RTC_INT
* - ADC3: up to 5V, by means of a 2/3 voltage divider.
*
* Also there are other ADC channels shared by default with Micro SD card and
* user button implementations:
* - ADC4: up to 3.3V.
* - ADC5: up to 3.3V.
* - ADC6: up to 3.3V.
*
* ADC inputs can only be on port A.
* All ADCx are exposed in JP5 connector, but only ADC1 and ADC3 have GND and
* VDD (3/5V) pins next to it, so these can be exposed into a 3-pin phidget-like
@ -216,12 +205,84 @@
* @{
*/
#define ADC_SENSORS_PORT GPIO_A_NUM /**< ADC GPIO control port */
#define ADC_SENSORS_ADC1_PIN 5 /**< ADC1 to PA5, 3V3 */
#define ADC_SENSORS_ADC2_PIN (-1) /**< ADC2 to PA4, 3V3 */
#define ADC_SENSORS_ADC3_PIN 2 /**< ADC3 to PA2, 5V0 */
#define ADC_SENSORS_ADC4_PIN (-1) /**< Not present */
#define ADC_SENSORS_ADC5_PIN (-1) /**< Not present */
#define ADC_SENSORS_MAX 2 /**< PA2, PA5 */
#ifndef ADC_SENSORS_CONF_ADC1_PIN
#define ADC_SENSORS_ADC1_PIN 5 /**< ADC1 to PA5, 3V3 */
#else
#if ((ADC_SENSORS_CONF_ADC1_PIN != -1) && (ADC_SENSORS_CONF_ADC1_PIN != 5))
#error "ADC1 channel should be mapped to PA5 or disabled with -1"
#else
#define ADC_SENSORS_ADC1_PIN ADC_SENSORS_CONF_ADC1_PIN
#endif
#endif
#ifndef ADC_SENSORS_CONF_ADC3_PIN
#define ADC_SENSORS_ADC3_PIN 2 /**< ADC3 to PA2, 5V */
#else
#if ((ADC_SENSORS_CONF_ADC3_PIN != -1) && (ADC_SENSORS_CONF_ADC3_PIN != 2))
#error "ADC3 channel should be mapped to PA2 or disabled with -1"
#else
#define ADC_SENSORS_ADC3_PIN ADC_SENSORS_CONF_ADC3_PIN
#endif
#endif
#ifndef ADC_SENSORS_CONF_ADC2_PIN
#define ADC_SENSORS_ADC2_PIN (-1) /**< ADC2 no declared */
#else
#define ADC_SENSORS_ADC2_PIN 4 /**< Hard-coded to PA4 */
#endif
#ifndef ADC_SENSORS_CONF_ADC4_PIN
#define ADC_SENSORS_ADC4_PIN (-1) /**< ADC4 not declared */
#else
#define ADC_SENSORS_ADC4_PIN 6 /**< Hard-coded to PA6 */
#endif
#ifndef ADC_SENSORS_CONF_ADC5_PIN
#define ADC_SENSORS_ADC5_PIN (-1) /**< ADC5 not declared */
#else
#define ADC_SENSORS_ADC5_PIN 7 /**< Hard-coded to PA7 */
#endif
#ifndef ADC_SENSORS_CONF_ADC6_PIN
#define ADC_SENSORS_ADC6_PIN (-1) /**< ADC6 not declared */
#else
#define ADC_SENSORS_ADC6_PIN 3 /**< Hard-coded to PA3 */
#endif
#ifndef ADC_SENSORS_CONF_MAX
#define ADC_SENSORS_MAX 2 /**< Maximum sensors */
#else
#define ADC_SENSORS_MAX ADC_SENSORS_CONF_MAX
#endif
/** @} */
/*---------------------------------------------------------------------------*/
/** \name RE-Mote Button configuration
*
* Buttons on the RE-Mote are connected as follows:
* - BUTTON_USER -> PA3, S1 user button, shared with bootloader and RTC_INT1
* - BUTTON_RESET -> RESET_N line, S2 reset both CC2538 and CoP
* - BUTTON_PIC1W -> shared with SHUTDOWN_ENABLE, not mounted.
* @{
*/
/** BUTTON_USER -> PA3 */
#define BUTTON_USER_PORT GPIO_A_NUM
#define BUTTON_USER_PIN 3
#define BUTTON_USER_VECTOR NVIC_INT_GPIO_PORT_A
/* Notify various examples that we have an user button.
* If ADC6 channel is used, then disable the user button
*/
#ifdef PLATFORM_CONF_WITH_BUTTON
#if (PLATFORM_CONF_WITH_BUTTON && (ADC_SENSORS_ADC6_PIN == 3))
#error "The ADC6 (PA3) and user button cannot be enabled at the same time"
#else
#define PLATFORM_HAS_BUTTON (PLATFORM_CONF_WITH_BUTTON && \
!(ADC_SENSORS_ADC6_PIN == 3))
#endif /* (PLATFORM_CONF_WITH_BUTTON && (ADC_SENSORS_ADC6_PIN == 3)) */
#else
#define PLATFORM_HAS_BUTTON !(ADC_SENSORS_ADC6_PIN == 3)
#endif /* PLATFORM_CONF_WITH_BUTTON */
/** @} */
/*---------------------------------------------------------------------------*/
/**