giomba
/
nes-proj
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

* Added f2xxx for two series (for example z1) 

* f1xxx is baseline and always included
* Cleaned up the names of uart and spi (no x in names)
* Updated SPI configuration for WiSMote
This commit is contained in:
Niclas Finne 2011-10-06 14:05:57 +02:00
parent 1a761ec3eb
commit cdfa8708e3
15 changed files with 289 additions and 204 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
cpu/msp430/Makefile.msp430
View File

@ -12,11 +12,15 @@ CONTIKI_CPU=$(CONTIKI)/cpu/msp430
### Define the source files we have in the MSP430 port
ifneq (,$(findstring msp430x5,$(MCU)))
CONTIKI_CPU_DIRS = ${addprefix f5xxx/,. dev} . dev
CONTIKI_CPU_FAM_DIR = f5xxx
else
CONTIKI_CPU_DIRS = ${addprefix f1xxx/,. dev} . dev
ifneq (,$(findstring msp430x2,$(MCU)))
CONTIKI_CPU_FAM_DIR = f2xxx
endif
endif
CONTIKI_CPU_DIRS = $(CONTIKI_CPU_FAM_DIR) f1xxx . dev
MSP430 = msp430.c flash.c clock.c leds.c leds-arch.c \
watchdog.c lpm.c mtarch.c rtimer-arch.c
UIPDRIVERS = me.c me_tabs.c slip.c crc16.c

2
cpu/msp430/f1xxx/clock.c
View File

@ -182,7 +182,7 @@ void
clock_delay(unsigned int i)
{
while(i--) {
asm("nop");
_NOP();
}
}
/*---------------------------------------------------------------------------*/

86
cpu/msp430/dev/uart1.c → cpu/msp430/f1xxx/uart1.c
View File

@ -92,11 +92,7 @@ handle_rxdma_timer(void *ptr)
uint8_t
uart1_active(void)
{
#if CONTIKI_TARGET_WISMOTE
return rx_in_progress | transmitting;
#else
return ((~ UTCTL1) & TXEPT) | rx_in_progress | transmitting;
#endif
}
/*---------------------------------------------------------------------------*/
void
@ -126,21 +122,16 @@ uart1_writeb(unsigned char c)
/* Loop until the transmission buffer is available. */
/*while((IFG2 & UTXIFG1) == 0);*/
UCA1TXBUF = ringbuf_get(&txbuf);
TXBUF1 = ringbuf_get(&txbuf);
}
#else /* TX_WITH_INTERRUPT */
#if CONTIKI_TARGET_WISMOTE
while(!(UCA1IFG & UCTXIFG)); // USCI_A1 TX buffer ready?
UCA1TXBUF = c;
#else
/* Loop until the transmission buffer is available. */
while((IFG2 & UTXIFG1) == 0);
/* Transmit the data. */
TXBUF1 = c;
#endif
#endif /* TX_WITH_INTERRUPT */
}
/*---------------------------------------------------------------------------*/
@ -151,35 +142,6 @@ uart1_writeb(unsigned char c)
void
uart1_init(unsigned long ubr)
{
#if CONTIKI_TARGET_WISMOTE
P4DIR |= BIT5;
P4OUT |= BIT5 ;
P5SEL |= BIT6|BIT7; // P5.6,7 = USCI_A1 TXD/RXD
P4SEL |= BIT7;
P4DIR |= BIT7;
UCA1CTL1 |= UCSWRST; // **Put state machine in reset**
UCA1CTL1 |= UCSSEL_2; // SMCLK
UCA1BR0 = 139;//69; // Baudrate 57600 (see User's Guide)
UCA1BR1 = 0; //
UCA1MCTL |= UCBRS_2 + UCBRF_0; // Modulation UCBRFx=0
UCA1CTL1 &= ~UCSWRST; // **Initialize USCI state machine**
UCA1IE |= UCRXIE;
UCA1IFG &= ~UCRXIFG;
//UCA1IFG &= ~UCTXIFG;
// UCA1TCTL1 |= URXSE;
rx_in_progress = 0;
transmitting = 0;
#if TX_WITH_INTERRUPT
ringbuf_init(&txbuf, txbuf_data, sizeof(txbuf_data));
UCA1IE |= UCTXIE;
//UCA1IFG &= ~UCTXIFG;
#endif /* TX_WITH_INTERRUPT */
#else
/* RS232 */
P3DIR &= ~0x80; /* Select P37 for input (UART1RX) */
P3DIR |= 0x40; /* Select P36 for output (UART1TX) */
@ -271,53 +233,8 @@ uart1_init(unsigned long ubr)
msp430_add_lpm_req(MSP430_REQUIRE_LPM1);
#endif /* RX_WITH_DMA */
#endif
}
/*---------------------------------------------------------------------------*/
#if CONTIKI_TARGET_WISMOTE
#ifdef __IAR_SYSTEMS_ICC__
#pragma vector=USCI_A1_VECTOR
__interrupt void
#else
interrupt(USCI_A1_VECTOR)
#endif
uart1_rx_interrupt(void)
{
uint8_t c;
ENERGEST_ON(ENERGEST_TYPE_IRQ);
if(UCRXIFG & UCA1IFG) {
rx_in_progress = 0;
// Check status register for receive errors.
if(UCA1STAT & UCRXERR) {
c = UCA1RXBUF; // Clear error flags by forcing a dummy read.
} else {
c = UCA1RXBUF;
if(uart1_input_handler != NULL) {
if(uart1_input_handler(c)) {
LPM4_EXIT;
}
}
}
UCA1IFG &= ~UCRXIFG;
}
#if TX_WITH_INTERRUPT
if(UCTXIFG & UCA1IFG) {
if(ringbuf_elements(&txbuf) == 0) {
transmitting = 0;
} else {
UCA1TXBUF = ringbuf_get(&txbuf);
}
UCA1IFG &= ~UCTXIFG;
}
#endif
//UCA1IFG &= 0x00;
ENERGEST_OFF(ENERGEST_TYPE_IRQ);
}
#else
#if !RX_WITH_DMA
#ifdef __IAR_SYSTEMS_ICC__
#pragma vector=UART1RX_VECTOR
@ -375,5 +292,4 @@ uart1_tx_interrupt(void)
ENERGEST_OFF(ENERGEST_TYPE_IRQ);
}
#endif /* TX_WITH_INTERRUPT */
#endif
/*---------------------------------------------------------------------------*/

9
cpu/msp430/f1xxx/spix.c → cpu/msp430/f2xxx/spi.c
View File

@ -25,8 +25,6 @@
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)$Id: spix.c,v 1.1 2010/08/24 16:23:20 joxe Exp $
*/
#include "contiki.h"
@ -43,12 +41,7 @@ unsigned char spi_busy = 0;
void
spi_init(void)
{
//static unsigned char spi_inited = 0;
//if (spi_inited)
//return;
// Initalize ports for communication with SPI units.
// Initialize ports for communication with SPI units.
UCB0CTL1 |= UCSWRST; //reset usci
UCB0CTL1 |= UCSSEL_2; //smclk while usci is reset

0
cpu/msp430/dev/uart0x.c → cpu/msp430/f2xxx/uart0.c
View File

0
cpu/msp430/dev/uart1x.c → cpu/msp430/f2xxx/uart1.c
View File

2
cpu/msp430/f5xxx/clock.c
View File

@ -179,7 +179,7 @@ void
clock_delay(unsigned int i)
{
while(i--) {
asm("nop");
_NOP();
}
}
/*---------------------------------------------------------------------------*/

0
cpu/msp430/f5xxx/spix.c → cpu/msp430/f5xxx/spi.c
View File

126
cpu/msp430/f5xxx/uart0.c Normal file
View File

@ -0,0 +1,126 @@
/*
* Copyright (c) 2011, Swedish Institute of Computer Science
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* Yet another machine dependent MSP430X UART0 code.
* IF2, etc. can not be used here... need to abstract to some macros
* later.
*/
#include "contiki.h"
#include <stdlib.h>
#include "sys/energest.h"
#include "dev/uart0.h"
#include "dev/watchdog.h"
static int (*uart0_input_handler)(unsigned char c);
static volatile uint8_t transmitting;
/*---------------------------------------------------------------------------*/
uint8_t
uart0_active(void)
{
return (UCA0STAT & UCBUSY) | transmitting;
}
/*---------------------------------------------------------------------------*/
void
uart0_set_input(int (*input)(unsigned char c))
{
uart0_input_handler = input;
}
/*---------------------------------------------------------------------------*/
void
uart0_writeb(unsigned char c)
{
watchdog_periodic();
/* Loop until the transmission buffer is available. */
while((UCA0STAT & UCBUSY));
/* Transmit the data. */
UCA0TXBUF = c;
}
/*---------------------------------------------------------------------------*/
/**
* Initalize the RS232 port.
*
*/
void
uart0_init(unsigned long ubr)
{
/* RS232 */
UCA0CTL1 |= UCSWRST; /* Hold peripheral in reset state */
UCA0CTL1 |= UCSSEL_2; /* CLK = SMCLK */
ubr = (MSP430_CPU_SPEED / ubr);
UCA0BR0 = ubr & 0xff;
UCA0BR1 = (ubr >> 8) & 0xff;
UCA0MCTL = UCBRS_3; /* Modulation UCBRSx = 3 */
P3DIR &= ~0x20; /* P3.5 = USCI_A0 RXD as input */
P3DIR |= 0x10; /* P3.4 = USCI_A0 TXD as output */
P3SEL |= 0x30; /* P3.4,5 = USCI_A0 TXD/RXD */
/*UCA0CTL1 &= ~UCSWRST;*/ /* Initialize USCI state machine */
transmitting = 0;
/* XXX Clear pending interrupts before enable */
UCA0IE &= ~UCRXIFG;
UCA0IE &= ~UCTXIFG;
UCA0CTL1 &= ~UCSWRST; /* Initialize USCI state machine **before** enabling interrupts */
UCA0IE |= UCRXIE; /* Enable UCA0 RX interrupt */
}
/*---------------------------------------------------------------------------*/
#ifdef __IAR_SYSTEMS_ICC__
#pragma vector=USCI_A0_VECTOR
__interrupt void
#else
interrupt(USCI_A0_VECTOR)
#endif
uart0_rx_interrupt(void)
{
uint8_t c;
ENERGEST_ON(ENERGEST_TYPE_IRQ);
if (UCA0IV == 2) {
if(UCA0STAT & UCRXERR) {
c = UCA0RXBUF; /* Clear error flags by forcing a dummy read. */
} else {
c = UCA0RXBUF;
if(uart0_input_handler != NULL) {
if(uart0_input_handler(c)) {
LPM4_EXIT;
}
}
}
}
ENERGEST_OFF(ENERGEST_TYPE_IRQ);
}
/*---------------------------------------------------------------------------*/

131
cpu/msp430/f5xxx/uart1.c Normal file
View File

@ -0,0 +1,131 @@
/*
* Copyright (c) 2011, Swedish Institute of Computer Science
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* Yet another machine dependent MSP430X UART0 code.
* IF2, etc. can not be used here... need to abstract to some macros
* later.
*/
#include "contiki.h"
#include <stdlib.h>
#include "sys/energest.h"
#include "dev/uart1.h"
#include "dev/watchdog.h"
static int (*uart1_input_handler)(unsigned char c);
static volatile uint8_t transmitting;
/*---------------------------------------------------------------------------*/
uint8_t
uart1_active(void)
{
return (UCA1STAT & UCBUSY) | transmitting;
}
/*---------------------------------------------------------------------------*/
void
uart1_set_input(int (*input)(unsigned char c))
{
uart1_input_handler = input;
}
/*---------------------------------------------------------------------------*/
void
uart1_writeb(unsigned char c)
{
watchdog_periodic();
/* Loop until the transmission buffer is available. */
while((UCA1STAT & UCBUSY));
/* Transmit the data. */
UCA1TXBUF = c;
}
/*---------------------------------------------------------------------------*/
/**
* Initalize the RS232 port.
*
*/
void
uart1_init(unsigned long ubr)
{
/* RS232 */
UCA1CTL1 |= UCSWRST; /* Hold peripheral in reset state */
UCA1CTL1 |= UCSSEL_2; /* CLK = SMCLK */
ubr = (MSP430_CPU_SPEED / ubr);
UCA1BR0 = ubr & 0xff;
UCA1BR1 = (ubr >> 8) & 0xff;
/* UCA1MCTL |= UCBRS_2 + UCBRF_0; // Modulation UCBRFx=0 */
UCA1MCTL = UCBRS_3; /* Modulation UCBRSx = 3 */
P4DIR |= BIT5;
P4OUT |= BIT5 ;
P5SEL |= BIT6|BIT7; // P5.6,7 = USCI_A1 TXD/RXD
P4SEL |= BIT7;
P4DIR |= BIT7;
/*UCA1CTL1 &= ~UCSWRST;*/ /* Initialize USCI state machine */
transmitting = 0;
/* XXX Clear pending interrupts before enable */
UCA1IE &= ~UCRXIFG;
UCA1IE &= ~UCTXIFG;
UCA1CTL1 &= ~UCSWRST; /* Initialize USCI state machine **before** enabling interrupts */
UCA1IE |= UCRXIE; /* Enable UCA1 RX interrupt */
}
/*---------------------------------------------------------------------------*/
#ifdef __IAR_SYSTEMS_ICC__
#pragma vector=USCI_A1_VECTOR
__interrupt void
#else
interrupt(USCI_A1_VECTOR)
#endif
uart1_rx_interrupt(void)
{
uint8_t c;
ENERGEST_ON(ENERGEST_TYPE_IRQ);
if (UCA1IV == 2) {
if(UCA1STAT & UCRXERR) {
c = UCA1RXBUF; /* Clear error flags by forcing a dummy read. */
} else {
c = UCA1RXBUF;
if(uart1_input_handler != NULL) {
if(uart1_input_handler(c)) {
LPM4_EXIT;
}
}
}
}
ENERGEST_OFF(ENERGEST_TYPE_IRQ);
}
/*---------------------------------------------------------------------------*/

2
platform/wismote/Makefile.wismote
View File

@ -7,7 +7,7 @@ CONTIKI_TARGET_SOURCEFILES += contiki-wismote-platform.c \
sky-sensors.c uip-ipchksum.c \
checkpoint-arch.c uart1.c slip_uart1.c uart1-putchar.c
ARCH=spix.c i2c.c node-id.c sensors.c cfs-coffee.c sht15.c \
ARCH=spi.c i2c.c node-id.c sensors.c cfs-coffee.c sht15.c \
cc2520.c cc2520-arch.c cc2520-arch-sfd.c \
sky-sensors.c uip-ipchksum.c \
checkpoint-arch.c uart1.c slip_uart1.c uart1-putchar.c

4
platform/wismote/contiki-wismote-main.c
View File

@ -205,10 +205,10 @@ main(int argc, char **argv)
leds_on(LEDS_ALL);
uart1_init(BAUD2UBR(115200)); /* Must come before first printf */
uart1_init(115200); /* Must come before first printf */
#if WITH_UIP
slip_arch_init(BAUD2UBR(115200));
slip_arch_init(115200);
#endif /* WITH_UIP */
//ds2411_init();

92
platform/wismote/dev/spi.h
View File

@ -1,92 +0,0 @@
/*
* Copyright (c) 2011, Swedish Institute of Computer Science.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/**
* \file
* Basic SPI macros
* \author
* Niclas Finne <nfi@sics.se>
* Joakim Eriksson <joakime@sics.se>
*/
#ifndef __SPI_H__
#define __SPI_H__
/* Define macros to use for checking SPI transmission status depending
on if it is possible to wait for TX buffer ready. This is possible
on for example MSP430 but not on AVR. */
#ifdef SPI_WAITFORTxREADY
#define SPI_WAITFORTx_BEFORE() SPI_WAITFORTxREADY()
#define SPI_WAITFORTx_AFTER()
#define SPI_WAITFORTx_ENDED() SPI_WAITFOREOTx()
#else /* SPI_WAITFORTxREADY */
#define SPI_WAITFORTx_BEFORE()
#define SPI_WAITFORTx_AFTER() SPI_WAITFOREOTx()
#define SPI_WAITFORTx_ENDED()
#endif /* SPI_WAITFORTxREADY */
extern unsigned char spi_busy;
void spi_init(void);
/* Write one character to SPI */
#define SPI_WRITE(data) \
do { \
UCB0IFG &= ~UCRXIFG; \
SPI_TXBUF = data; \
SPI_WAITFORTxREADY(); \
} while(0)
/* Write one character to SPI - will not wait for end
useful for multiple writes with wait after final */
#define SPI_WRITE_FAST(data) \
do { \
UCB0IFG &= ~UCRXIFG; \
SPI_TXBUF = data; \
SPI_WAITFORTxREADY(); \
} while(0)
/* Read one character from SPI */
#define SPI_READ(data) \
do { \
UCB0IFG &= ~UCRXIFG; \
SPI_TXBUF = 0; \
SPI_WAITFORTxREADY(); \
SPI_BUSY_WAIT(); \
data = SPI_RXBUF; \
} while(0)
/* Flush the SPI read register */
#define SPI_FLUSH() \
do { \
SPI_RXBUF; \
SPI_RXBUF; \
} while(0);
#endif /* __SPI_H__ */

27
platform/wismote/platform-conf.h
View File

@ -39,8 +39,6 @@
* Definitions below are dictated by the hardware and not really
* changeable!
*/
/* Platform WISMOTE */
#define WISMOTE 1
#define PLATFORM_HAS_LEDS 1
#define PLATFORM_HAS_BUTTON 1
@ -52,7 +50,7 @@
#define CLOCK_CONF_SECOND 128UL
#define RTIMER_CONF_SECOND (4096U*8)
#define BAUD2UBR(baud) ((F_CPU/baud))
#define BAUD2UBR(baud) (baud)
#define CCIF
#define CLIF
@ -96,16 +94,25 @@ typedef unsigned long off_t;
#define SPI_RXBUF UCB0RXBUF
/* USART0 Tx ready? */
#define SPI_WAITFOREOTx() while (!(UCB0IFG & UCRXIFG))
#define SPI_WAITFOREOTx() while ((UCB0STAT & UCBUSY) != 0)
/* USART0 Rx ready? */
#define SPI_WAITFOREORx() while (!(UCB0IFG & UCRXIFG))
#define SPI_WAITFOREORx() while ((UCB0IFG & UCRXIFG) == 0)
/* USART0 Tx buffer ready? */
#define SPI_WAITFORTxREADY() while (!(UCB0IFG & UCRXIFG))
#define SPI_BUSY_WAIT() while ((UCB0STAT & UCBUSY) == 1)
#define SPI_WAITFORTxREADY() while ((UCB0IFG & UCTXIFG) == 0)
/* /\* USART0 Tx ready? *\/ */
/* #define SPI_WAITFOREOTx() while (!(UCB0IFG & UCRXIFG)) */
/* /\* USART0 Rx ready? *\/ */
/* #define SPI_WAITFOREORx() while (!(UCB0IFG & UCRXIFG)) */
/* /\* USART0 Tx buffer ready? *\/ */
/* #define SPI_WAITFORTxREADY() while (!(UCB0IFG & UCRXIFG)) */
/* #define SPI_BUSY_WAIT() while ((UCB0STAT & UCBUSY) == 1) */
#define SCK 1 /* P3.1 - Output: SPI Serial Clock (SCLK) */
#define MOSI 2 /* P3.2 - Output: SPI Master out - slave in (MOSI) */
#define MISO 3 /* P3.3 - Input: SPI Master in - slave out (MISO) */
#define MOSI 1 /* P3.1 - Output: SPI Master out - slave in (MOSI) */
#define MISO 2 /* P3.2 - Input: SPI Master in - slave out (MISO) */
#define SCK 3 /* P3.3 - Output: SPI Serial Clock (SCLK) */
/* #define SCK 1 /\* P3.1 - Output: SPI Serial Clock (SCLK) *\/ */
/* #define MOSI 2 /\* P3.2 - Output: SPI Master out - slave in (MOSI) *\/ */
/* #define MISO 3 /\* P3.3 - Input: SPI Master in - slave out (MISO) *\/ */
/*
* SPI bus - M25P80 external flash configuration.

4
platform/z1/Makefile.common
View File

@ -16,9 +16,9 @@ CLEAN += symbols.c symbols.h
ARCH=msp430.c leds.c watchdog.c xmem.c \
spix.c cc2420.c cc2420-aes.c cc2420-arch.c cc2420-arch-sfd.c\
spi.c cc2420.c cc2420-aes.c cc2420-arch.c cc2420-arch-sfd.c\
node-id.c sensors.c button-sensor.c cfs-coffee.c \
radio-sensor.c uart0x.c uart0-putchar.c uip-ipchksum.c \
radio-sensor.c uart0.c uart0-putchar.c uip-ipchksum.c \
checkpoint-arch.c slip.c slip_uart0.c \
z1-phidgets.c sht11.c sht11-sensor.c light-sensor.c \
battery-sensor.c sky-sensors.c tmp102.c temperature-sensor.c