Added SPI driver for CC2538

This uses the core/dev/spi.h header and implements the spi_init()
function and the various macros for SPI operation. ssi.h contains all of
the register locations and information.

This implementation is not very versatile, mostly because I don't how to
make it flexible in the contiki system. It supports pin muxing for the
four spi pins, but other than that picks sensible defaults.

The SPI macros (like SPI_READ()) are defined in
cpu/cc2538/spi-arch.h. In order to use the SPI driver, add the following
includes to your project:

    #include "spi-arch.h
    #include "dev/spi.h"
This commit is contained in:
Brad Campbell 2013-09-05 14:59:56 -04:00
parent 55686d7ca2
commit e2af903d05
6 changed files with 364 additions and 1 deletions

View File

@ -40,7 +40,7 @@ CONTIKI_CPU_DIRS += ../cc253x/usb/common ../cc253x/usb/common/cdc-acm
### CPU-dependent source files ### CPU-dependent source files
CONTIKI_CPU_SOURCEFILES += clock.c rtimer-arch.c uart.c watchdog.c CONTIKI_CPU_SOURCEFILES += clock.c rtimer-arch.c uart.c watchdog.c
CONTIKI_CPU_SOURCEFILES += nvic.c cpu.c sys-ctrl.c gpio.c ioc.c CONTIKI_CPU_SOURCEFILES += nvic.c cpu.c sys-ctrl.c gpio.c ioc.c spi.c
CONTIKI_CPU_SOURCEFILES += cc2538-rf.c udma.c lpm.c CONTIKI_CPU_SOURCEFILES += cc2538-rf.c udma.c lpm.c
CONTIKI_CPU_SOURCEFILES += dbg.c ieee-addr.c CONTIKI_CPU_SOURCEFILES += dbg.c ieee-addr.c
CONTIKI_CPU_SOURCEFILES += slip-arch.c slip.c CONTIKI_CPU_SOURCEFILES += slip-arch.c slip.c

View File

@ -185,6 +185,14 @@ typedef void (* gpio_callback_t)(uint8_t port, uint8_t pin);
* in this category * in this category
*/ */
#define GPIO_PIN_MASK(PIN) (1 << PIN) #define GPIO_PIN_MASK(PIN) (1 << PIN)
/**
* \brief Converts a port number to the port base address
* \param The port number in the range 0 - 3. Likely GPIO_X_NUM.
* \return The base address for the registers corresponding to that port
* number.
*/
#define GPIO_PORT_TO_BASE(PORT) (GPIO_A_BASE + (PORT << 12))
/** @} */ /** @} */
/*---------------------------------------------------------------------------*/ /*---------------------------------------------------------------------------*/
/** \name GPIO Register offset declarations /** \name GPIO Register offset declarations

98
cpu/cc2538/dev/spi.c Normal file
View File

@ -0,0 +1,98 @@
/*
* Copyright (c) 2013, University of Michigan.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/**
* \addtogroup cc2538-spi
* @{
*
* \file
* Implementation of the cc2538 SPI peripheral
*/
#include "contiki.h"
#include "reg.h"
#include "dev/ioc.h"
#include "dev/sys-ctrl.h"
#include "dev/spi.h"
#include "dev/ssi.h"
#include "dev/gpio.h"
#include "spi-arch.h"
/**
* \brief Initialize the SPI bus.
*
* This SPI init() function uses the following #defines to set the pins:
* CC2538_SPI_CLK_PORT_NUM CC2538_SPI_CLK_PIN_NUM
* CC2538_SPI_MOSI_PORT_NUM CC2538_SPI_MOSI_PIN_NUM
* CC2538_SPI_MISO_PORT_NUM CC2538_SPI_MISO_PIN_NUM
* CC2538_SPI_SEL_PORT_NUM CC2538_SPI_SEL_PIN_NUM
*
* This sets the SPI data width to 8 bits and the mode to Freescale mode 3.
*/
void
spi_init(void)
{
/* Enable the SSI peripheral */
REG(SYS_CTRL_RCGCSSI) |= 1;
/* Start by disabling the peripheral before configuring it */
REG(SSI0_BASE + SSI_CR1) = 0;
/* Set the IO clock as the SSI clock */
REG(SSI0_BASE + SSI_CC) = 1;
/* Set the mux correctly to connect the SSI pins to the correct GPIO pins */
ioc_set_sel(CC2538_SPI_CLK_PORT_NUM, CC2538_SPI_CLK_PIN_NUM, IOC_PXX_SEL_SSI0_CLKOUT);
ioc_set_sel(CC2538_SPI_MOSI_PORT_NUM, CC2538_SPI_MOSI_PIN_NUM, IOC_PXX_SEL_SSI0_TXD);
REG(IOC_SSIRXD_SSI0) = (CC2538_SPI_MISO_PORT_NUM * 8) + CC2538_SPI_MISO_PIN_NUM;
ioc_set_sel(CC2538_SPI_SEL_PORT_NUM, CC2538_SPI_SEL_PIN_NUM, IOC_PXX_SEL_SSI0_FSSOUT);
/* Put all the SSI gpios into peripheral mode */
GPIO_PERIPHERAL_CONTROL(GPIO_PORT_TO_BASE(CC2538_SPI_CLK_PORT_NUM), GPIO_PIN_MASK(CC2538_SPI_CLK_PIN_NUM));
GPIO_PERIPHERAL_CONTROL(GPIO_PORT_TO_BASE(CC2538_SPI_MOSI_PORT_NUM), GPIO_PIN_MASK(CC2538_SPI_MOSI_PIN_NUM));
GPIO_PERIPHERAL_CONTROL(GPIO_PORT_TO_BASE(CC2538_SPI_MISO_PORT_NUM), GPIO_PIN_MASK(CC2538_SPI_MISO_PIN_NUM));
GPIO_PERIPHERAL_CONTROL(GPIO_PORT_TO_BASE(CC2538_SPI_SEL_PORT_NUM), GPIO_PIN_MASK(CC2538_SPI_SEL_PIN_NUM));
/* Disable any pull ups or the like */
ioc_set_over(CC2538_SPI_CLK_PORT_NUM, CC2538_SPI_CLK_PIN_NUM, IOC_OVERRIDE_DIS);
ioc_set_over(CC2538_SPI_MOSI_PORT_NUM, CC2538_SPI_MOSI_PIN_NUM, IOC_OVERRIDE_DIS);
ioc_set_over(CC2538_SPI_MISO_PORT_NUM, CC2538_SPI_MISO_PIN_NUM, IOC_OVERRIDE_DIS);
ioc_set_over(CC2538_SPI_SEL_PORT_NUM, CC2538_SPI_SEL_PIN_NUM, IOC_OVERRIDE_DIS);
/* Configure the clock */
REG(SSI0_BASE + SSI_CPSR) = 2;
/* Put the ssi in motorola SPI mode with 8 bit data */
REG(SSI0_BASE + SSI_CR0) = SSI_CR0_SPH_M | SSI_CR0_SPO_M | (7);
/* Enable the SSI */
REG(SSI0_BASE + SSI_CR1) |= SSI_CR1_SSE;
/* Clear the RX FIFO */
SPI_WAITFOREORx();
}
/** @} */

175
cpu/cc2538/dev/ssi.h Normal file
View File

@ -0,0 +1,175 @@
/*
* Copyright (c) 2013, University of Michigan.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/**
* \addtogroup cc2538
* @{
*
* \defgroup cc2538-spi cc2538 Synchronous Serial Interface
*
* Driver for the cc2538 SPI peripheral
*
* Register and bitmask definitions based on the Foundation Firmware from
* Texas Instruments.
* @{
*
* \file
* Header file for the cc2538 Synchronous Serial Interface
*/
#ifndef SSI_H_
#define SSI_H_
/*---------------------------------------------------------------------------*/
/** \name Base register memory locations.
* @{
*/
#define SSI0_BASE 0x40008000 /**< Base address for SSI0 */
#define SSI1_BASE 0x40009000 /**< Base address for SSI1 */
/** @} */
/*---------------------------------------------------------------------------*/
/** \name SSI register offsets
* @{
*/
#define SSI_CR0 0x00000000 /**< Control register 0 */
#define SSI_CR1 0x00000004 /**< Control register 1 */
#define SSI_DR 0x00000008 /**< Access the TX and RX FIFO */
#define SSI_SR 0x0000000C /**< Meta information about FIFO */
#define SSI_CPSR 0x00000010 /**< Clock divider */
#define SSI_IM 0x00000014 /**< Interrupt mask */
#define SSI_RIS 0x00000018 /**< Raw interrupt status */
#define SSI_MIS 0x0000001C /**< Masked interrupt status */
#define SSI_ICR 0x00000020 /**< Interrupt clear register */
#define SSI_DMACTL 0x00000024 /**< DMA control register */
#define SSI_CC 0x00000FC8 /**< Clock configuration */
/** @} */
/*---------------------------------------------------------------------------*/
/** \name SSI Bitmasks and shifts
* @{
*/
#define SSI_CR0_SCR_M 0x0000FF00 /**< Serial clock rate mask */
#define SSI_CR0_SCR_S 8 /**< Serial clock rate shift */
#define SSI_CR0_SPH 0x00000080 /**< Serial clock phase (H) */
#define SSI_CR0_SPH_M 0x00000080 /**< Serial clock phase (H) mask */
#define SSI_CR0_SPH_S 7 /**< Serial clock phase (H) shift */
#define SSI_CR0_SPO 0x00000040 /**< Serial clock phase (O) */
#define SSI_CR0_SPO_M 0x00000040 /**< Serial clock phase (O) mask */
#define SSI_CR0_SPO_S 6 /**< Serial clock phase (O) shift */
#define SSI_CR0_FRF_M 0x00000030 /**< Frame format select mask */
#define SSI_CR0_FRF_S 4 /**< Frame format select shift */
#define SSI_CR0_DSS_M 0x0000000F /**< Data size select mask */
#define SSI_CR0_DSS_S 0 /**< Data size select shift */
#define SSI_CR1_SOD 0x00000008 /**< Slave mode output disable */
#define SSI_CR1_SOD_M 0x00000008 /**< Slave mode output disable mask */
#define SSI_CR1_SOD_S 3 /**< Slave mode output disable shift */
#define SSI_CR1_MS 0x00000004 /**< Master and slave select */
#define SSI_CR1_MS_M 0x00000004 /**< Master and slave select mask */
#define SSI_CR1_MS_S 2 /**< Master and slave select shift */
#define SSI_CR1_SSE 0x00000002 /**< Synchronous serial port enable */
#define SSI_CR1_SSE_M 0x00000002 /**< Synchronous serial port enable mask */
#define SSI_CR1_SSE_S 1 /**< Synchronous serial port enable shift */
#define SSI_CR1_LBM 0x00000001 /**< Loop-back mode */
#define SSI_CR1_LBM_M 0x00000001 /**< Loop-back mode mask */
#define SSI_CR1_LBM_S 0 /**< Loop-back mode shift */
#define SSI_DR_DATA_M 0x0000FFFF /**< FIFO data mask */
#define SSI_DR_DATA_S 0 /**< FIFO data shift */
#define SSI_SR_BSY 0x00000010 /**< Busy bit */
#define SSI_SR_BSY_M 0x00000010 /**< Busy bit mask */
#define SSI_SR_BSY_S 4 /**< Busy bit shift */
#define SSI_SR_RFF 0x00000008 /**< Receive FIFO full */
#define SSI_SR_RFF_M 0x00000008 /**< Receive FIFO full mask */
#define SSI_SR_RFF_S 3 /**< Receive FIFO full shift */
#define SSI_SR_RNE 0x00000004 /**< Receive FIFO not empty */
#define SSI_SR_RNE_M 0x00000004 /**< Receive FIFO not empty mask */
#define SSI_SR_RNE_S 2 /**< Receive FIFO not empty shift */
#define SSI_SR_TNF 0x00000002 /**< Transmit FIFO not full */
#define SSI_SR_TNF_M 0x00000002 /**< Transmit FIFO not full mask */
#define SSI_SR_TNF_S 1 /**< Transmit FIFO not full shift */
#define SSI_SR_TFE 0x00000001 /**< Transmit FIFO empty */
#define SSI_SR_TFE_M 0x00000001 /**< Transmit FIFO empty mask */
#define SSI_SR_TFE_S 0 /**< Transmit FIFO empty shift */
#define SSI_CPSR_CPSDVSR_M 0x000000FF /**< Clock prescale divisor mask */
#define SSI_CPSR_CPSDVSR_S 0 /**< Clock prescale divisor shift */
#define SSI_IM_TXIM 0x00000008 /**< Transmit FIFO interrupt mask */
#define SSI_IM_TXIM_M 0x00000008 /**< Transmit FIFO interrupt mask mask */
#define SSI_IM_TXIM_S 3 /**< Transmit FIFO interrupt mask shift */
#define SSI_IM_RXIM 0x00000004 /**< Receive FIFO interrupt mask */
#define SSI_IM_RXIM_M 0x00000004 /**< Receive FIFO interrupt mask mask */
#define SSI_IM_RXIM_S 2 /**< Receive FIFO interrupt mask shift */
#define SSI_IM_RTIM 0x00000002 /**< Receive time-out interrupt mask */
#define SSI_IM_RTIM_M 0x00000002 /**< Receive time-out interrupt mask mask */
#define SSI_IM_RTIM_S 1 /**< Receive time-out interrupt mask shift */
#define SSI_IM_RORIM 0x00000001 /**< Receive overrun interrupt mask */
#define SSI_IM_RORIM_M 0x00000001 /**< Receive overrun interrupt mask mask */
#define SSI_IM_RORIM_S 0 /**< Receive overrun interrupt mask shift */
#define SSI_RIS_TXRIS 0x00000008 /**< SSITXINTR raw state */
#define SSI_RIS_TXRIS_M 0x00000008 /**< SSITXINTR raw state mask */
#define SSI_RIS_TXRIS_S 3 /**< SSITXINTR raw state shift */
#define SSI_RIS_RXRIS 0x00000004 /**< SSIRXINTR raw state */
#define SSI_RIS_RXRIS_M 0x00000004 /**< SSIRXINTR raw state mask */
#define SSI_RIS_RXRIS_S 2 /**< SSIRXINTR raw state shift */
#define SSI_RIS_RTRIS 0x00000002 /**< SSIRTINTR raw state */
#define SSI_RIS_RTRIS_M 0x00000002 /**< SSIRTINTR raw state mask */
#define SSI_RIS_RTRIS_S 1 /**< SSIRTINTR raw state shift */
#define SSI_RIS_RORRIS 0x00000001 /**< SSIRORINTR raw state */
#define SSI_RIS_RORRIS_M 0x00000001 /**< SSIRORINTR raw state mask */
#define SSI_RIS_RORRIS_S 0 /**< SSIRORINTR raw state shift */
#define SSI_MIS_TXMIS 0x00000008 /**< SSITXINTR masked state */
#define SSI_MIS_TXMIS_M 0x00000008 /**< SSITXINTR masked state mask */
#define SSI_MIS_TXMIS_S 3 /**< SSITXINTR masked state shift */
#define SSI_MIS_RXMIS 0x00000004 /**< SSIRXINTR masked state */
#define SSI_MIS_RXMIS_M 0x00000004 /**< SSIRXINTR masked state mask */
#define SSI_MIS_RXMIS_S 2 /**< SSIRXINTR masked state shift */
#define SSI_MIS_RTMIS 0x00000002 /**< SSIRTINTR masked state */
#define SSI_MIS_RTMIS_M 0x00000002 /**< SSIRTINTR masked state mask */
#define SSI_MIS_RTMIS_S 1 /**< SSIRTINTR masked state shift */
#define SSI_MIS_RORMIS 0x00000001 /**< SSIRORINTR masked state */
#define SSI_MIS_RORMIS_M 0x00000001 /**< SSIRORINTR masked state mask */
#define SSI_MIS_RORMIS_S 0 /**< SSIRORINTR masked state shift */
#define SSI_ICR_RTIC 0x00000002 /**< Receive time-out interrupt clear */
#define SSI_ICR_RTIC_M 0x00000002 /**< Receive time-out interrupt clear mask */
#define SSI_ICR_RTIC_S 1 /**< Receive time-out interrupt clear shift */
#define SSI_ICR_RORIC 0x00000001 /**< Receive overrun interrupt clear */
#define SSI_ICR_RORIC_M 0x00000001 /**< Receive overrun interrupt clear mask */
#define SSI_ICR_RORIC_S 0 /**< Receive overrun interrupt clear shift */
#define SSI_DMACTL_TXDMAE 0x00000002 /**< Transmit DMA enable */
#define SSI_DMACTL_TXDMAE_M 0x00000002 /**< Transmit DMA enable mask */
#define SSI_DMACTL_TXDMAE_S 1 /**< Transmit DMA enable shift */
#define SSI_DMACTL_RXDMAE 0x00000001 /**< Receive DMA enable */
#define SSI_DMACTL_RXDMAE_M 0x00000001 /**< Receive DMA enable mask */
#define SSI_DMACTL_RXDMAE_S 0 /**< Receive DMA enable shift */
#define SSI_CC_CS_M 0x00000007 /**< Baud and system clock source mask */
#define SSI_CC_CS_S 0 /**< Baud and system clock source shift */
/** @} */
#endif
/**
* @}
* @}
*/

66
cpu/cc2538/spi-arch.h Normal file
View File

@ -0,0 +1,66 @@
/*
* Copyright (c) 2013, University of Michigan.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/**
* \addtogroup cc2538
* @{
*
* Implementation of the low-level SPI primitives such as waiting for the TX
* FIFO to be ready, inserting into the TX FIFO, etc.
* @{
*/
/**
* \file
* Header file for the cc2538 SPI commands
*/
#ifndef SPI_ARCH_H_
#define SPI_ARCH_H_
#include "contiki.h"
#include "dev/ssi.h"
#define SPI_WAITFORTxREADY() do { \
while(!(REG(SSI0_BASE + SSI_SR) & SSI_SR_TNF)); \
} while (0)
#define SPI_TXBUF REG(SSI0_BASE + SSI_DR)
#define SPI_RXBUF REG(SSI0_BASE + SSI_DR)
#define SPI_WAITFOREOTx() do { \
while(REG(SSI0_BASE + SSI_SR) & SSI_SR_BSY); \
} while (0)
#define SPI_WAITFOREORx() do { \
while(!(REG(SSI0_BASE + SSI_SR) & SSI_SR_RNE)); \
} while (0)
#endif /* SPI_ARCH_H_ */
/**
* @}
* @}
*/

View File

@ -178,6 +178,22 @@
#define PLATFORM_HAS_BUTTON 1 #define PLATFORM_HAS_BUTTON 1
/** @} */ /** @} */
/*---------------------------------------------------------------------------*/ /*---------------------------------------------------------------------------*/
/**
* \name SPI configuration
*
* These values configure which CC2538 pins to use for the SPI lines.
* @{
*/
#define CC2538_SPI_CLK_PORT_NUM GPIO_A_NUM
#define CC2538_SPI_CLK_PIN_NUM 2
#define CC2538_SPI_MOSI_PORT_NUM GPIO_A_NUM
#define CC2538_SPI_MOSI_PIN_NUM 4
#define CC2538_SPI_MISO_PORT_NUM GPIO_A_NUM
#define CC2538_SPI_MISO_PIN_NUM 5
#define CC2538_SPI_SEL_PORT_NUM GPIO_B_NUM
#define CC2538_SPI_SEL_PIN_NUM 5
/** @} */
/*---------------------------------------------------------------------------*/
/** /**
* \name Device string used on startup * \name Device string used on startup
* @{ * @{