giomba
/
nes-proj
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

srf06-cc26xx: add default TSCH configuration for the platform

This commit is contained in:
Atis Elsts 2016-06-07 00:09:02 +03:00
parent 30e820ffa5
commit f99511f494
1 changed files with 49 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

49
platform/srf06-cc26xx/contiki-conf.h
View File

@ -329,6 +329,55 @@ typedef uint32_t uip_stats_t;
*/
typedef uint32_t rtimer_clock_t;
#define RTIMER_CLOCK_DIFF(a, b) ((int32_t)((a) - (b)))
/* --------------------------------------------------------------------- */
/* TSCH related defines */
/* Delay between GO signal and SFD */
#define RADIO_DELAY_BEFORE_TX ((unsigned)US_TO_RTIMERTICKS(81))
/* Delay between GO signal and start listening.
* This value is so small because the radio is constantly on within each timeslot. */
#define RADIO_DELAY_BEFORE_RX ((unsigned)US_TO_RTIMERTICKS(15))
/* Delay between the SFD finishes arriving and it is detected in software.
* Not important on this platform as it uses hardware timestamps for SFD */
#define RADIO_DELAY_BEFORE_DETECT ((unsigned)US_TO_RTIMERTICKS(0))
/* Timer conversion; radio is running at 4 MHz */
#define RADIO_TIMER_SECOND 4000000u
#if (RTIMER_SECOND % 256) || (RADIO_TIMER_SECOND % 256)
#error RADIO_TO_RTIMER macro must be fixed!
#endif
#define RADIO_TO_RTIMER(X) ((uint32_t)(((uint64_t)(X) * (RTIMER_SECOND / 256)) / (RADIO_TIMER_SECOND / 256)))
#define USEC_TO_RADIO(X) ((X) * 4)
/* The PHY header (preamble + SFD, 4+1 bytes) duration is equivalent to 10 symbols */
#define RADIO_IEEE_802154_PHY_HEADER_DURATION_USEC 160
/* Do not turn off TSCH within a timeslot: not enough time */
#define TSCH_CONF_RADIO_ON_DURING_TIMESLOT 1
/* Disable TSCH frame filtering */
#define TSCH_CONF_HW_FRAME_FILTERING 0
/* Disable turning off HF oscillator when radio is off;
enable this for TSCH, disable to save more energy. */
#ifndef CC2650_FAST_RADIO_STARTUP
#define CC2650_FAST_RADIO_STARTUP 1
#endif
/* Use hardware timestamps */
#ifndef TSCH_CONF_RESYNC_WITH_SFD_TIMESTAMPS
#define TSCH_CONF_RESYNC_WITH_SFD_TIMESTAMPS 1
#define TSCH_CONF_TIMESYNC_REMOVE_JITTER 0
#endif
/* The drift compared to "true" 10ms slots.
Enable adaptive sync to enable compensation for this. */
#define TSCH_CONF_BASE_DRIFT_PPM -977
/* 10 times per second */
#define TSCH_CONF_ASSOCIATION_CHANNEL_SWITCH_FREQUENCY 10
/** @} */
/*---------------------------------------------------------------------------*/
/* board.h assumes that basic configuration is done */