Edvard Pettersen
257a3794a1
Fixed RF front-end configuration and RF switching for CC13xx
...
Two issues caused the sensitivity on CC13xx devices to be dramatically
worse than CC26xx devices:
* Wrong front-end mode configuration
* Faulty/outdated RF switching logic
Both issues are inherently board-specific. Therefore, a generic
configuration was aligned across all boards which allows a specific
board to configure a correct RF front-end mode. In addition, the RF
switching logic was updated to latest and greatest.
2019-01-28 16:22:42 +01:00
Edvard Pettersen
c177034d39
Fixed BLE advertisement on SimpleLink
...
A couple of issues was found:
* Wrong CPE patches in RF settings
* Wrong whitening init value for the CMD_BLE5_ADV_NC command
* BLE MAC address was not copied to RAM before set in the bleAdvPar
construct.
* BLE advertisements were not transmitted in intervals as specified by
BLE spec.
2019-01-28 16:22:41 +01:00
George Oikonomou
17f4c68888
Merge pull request #819 from atiselsts/contrib/msp430-platforms
...
Add back Zolertia Z1 platform
2019-01-24 21:18:54 +00:00
George Oikonomou
eb03db9fa4
Merge branch 'develop' into contrib/msp430-platforms
2019-01-24 11:26:57 +00:00
George Oikonomou
9ac015013e
Merge pull request #821 from firmwaremodules/bugfix/simplelink-opt3001
...
Fix a couple of simplelink platform bugs
2019-01-17 18:10:35 +00:00
Takeshi Sakoda
855089af8d
tsch: fix for https://github.com/contiki-ng/contiki-ng/pull/769#discussion_r247239784
2019-01-15 14:10:59 +09:00
firmwareguru
8203abb2e7
fixes contiki-ng/contiki-ng#768 simplelink opt3001 wrong value
2019-01-14 19:35:12 -07:00
firmwareguru
284b52c8b6
Fix cc26x0-cc13x0 example not building
2019-01-14 19:23:13 -07:00
Atis Elsts
b955dbe9a1
TSCH simple node: also set coordinator id node_id == 1 on Z1
2019-01-14 14:55:34 +00:00
Atis Elsts
bc09e10578
add back sensniff config for Zolertia z1
2019-01-14 14:55:34 +00:00
Atis Elsts
4d0ca686f2
Add back some regression tests for the Z1 platform
2019-01-14 14:55:34 +00:00
Atis Elsts
313802dcbd
Exclude z1 from some Makefiles: not all examples can be built on z1 due to limited memory
2019-01-14 14:55:34 +00:00
Atis Elsts
8b8798ada9
add back zolertia tool folder
2019-01-14 14:55:34 +00:00
Atis Elsts
f35a7a2f36
add back z1 platform
2019-01-14 14:55:34 +00:00
Zhitao He
67e3b455cd
correct time intervals of example CoAP periodic resources: one second = 1000 x 1 ms coap timer ticks, not CLOCK_SECOND ticks
2019-01-14 15:27:43 +01:00
Joakim Eriksson
67b62025a0
Merge branch 'develop' into fix-header-processing
2019-01-14 13:42:22 +01:00
George Oikonomou
423d928e97
Merge pull request #772 from simonduq/contrib/shell-no-ipv6
...
IPv6-less shell
2019-01-12 18:26:50 +00:00
George Oikonomou
3af022f6da
Merge branch 'develop' into contrib/shell-no-ipv6
2019-01-12 16:44:28 +00:00
Simon Duquennoy
5c206691a3
Shell: group IPv6 and RPL-Lite commands
2019-01-11 21:22:16 +01:00
Simon Duquennoy
36ee548b51
Shell: add mac-addr command
2019-01-11 21:16:48 +01:00
Simon Duquennoy
d850fff673
Make it possible to use shell without IPv6
2019-01-11 21:16:48 +01:00
Simon Duquennoy
def557014d
Merge branch 'develop' into fix-header-processing
2019-01-11 20:59:49 +01:00
George Oikonomou
e2c0964091
Merge pull request #814 from zhitaoh/fix-nrf-zero-temp-read
...
fix temperature sensor reading in nrf52dk platform, which was stuck a…
2019-01-11 13:12:56 +00:00
George Oikonomou
35de5ed25e
Merge branch 'develop' into fix-nrf-zero-temp-read
2019-01-10 23:33:18 +02:00
George Oikonomou
fe07e6dd79
Merge pull request #804 from atiselsts/feature/application-level-timesync
...
Application level time synchronization example with TSCH
2019-01-10 23:32:22 +02:00
Zhitao He
d0a0a2a568
busy wait maximum 72 us (typically 36 us) for taking a measurement from the on-chip temperature sensor
2019-01-10 18:56:27 +01:00
George Oikonomou
21b5f1b36f
Merge branch 'develop' into feature/application-level-timesync
2019-01-10 17:19:33 +02:00
Nicolas Tsiftes
f1b2d35a8c
Extend 8-bit variables to 16 bits to avoid integer overflows when processing IPv6 extension header options.
2019-01-10 10:43:44 +01:00
George Oikonomou
f5a258c6a6
Merge branch 'develop' into fix-nrf-zero-temp-read
2019-01-10 03:42:07 +02:00
George Oikonomou
5a974a21ba
Merge pull request #806 from atiselsts/bugfix/platforms-exclude
...
Do not allow to 'trick' the platform and board exclude checks
2019-01-10 03:41:53 +02:00
George Oikonomou
5ac181741f
Merge branch 'develop' into fix-nrf-zero-temp-read
2019-01-10 03:40:10 +02:00
George Oikonomou
4612d38db7
Merge pull request #815 from atiselsts/contrib/cc26xx-aes
...
Add AES-128 driver for CC26x0/CC13x0
2019-01-10 03:36:16 +02:00
Atis Elsts
0b31b090aa
Add AES-128 driver for CC26x0/CC13x0
2019-01-09 16:54:03 +02:00
Zhitao He
cd1b23ff38
fix temperature sensor reading in nrf52dk platform, which was stuck at zero
2019-01-09 14:02:01 +01:00
George Oikonomou
54ea6d59aa
Merge branch 'develop' into feature/application-level-timesync
2018-12-19 03:30:29 +00:00
George Oikonomou
c6f7a36c50
Merge branch 'develop' into bugfix/platforms-exclude
2018-12-19 02:31:31 +00:00
George Oikonomou
4928a5e1e0
Merge pull request #805 from atiselsts/bugfix/rpl-example-cleanup
...
UDP example code cleanup
2018-12-19 02:14:00 +00:00
Atis Elsts
c01d3d7d22
Do not allow to 'trick' the platform and board exclude checks
2018-12-18 19:42:45 +00:00
Atis Elsts
de3c154f48
UDP example code cleanup
2018-12-18 16:52:40 +00:00
Atis Elsts
99a68e84f1
add the TSCH application-level timesync example
2018-12-18 16:50:09 +00:00
Atis Elsts
08cbbe224b
minor shell update: extend the tsch-status command
2018-12-18 16:40:18 +00:00
Atis Elsts
f9cd3449f3
add tsch_get_network_uptime_ticks() function
2018-12-18 16:40:18 +00:00
George Oikonomou
9c086d40b1
Merge pull request #801 from atiselsts/readme-typo
...
Fix a typo in README
2018-12-17 21:44:31 +00:00
Atis Elsts
8863fcab0e
typo fix in README
2018-12-17 15:34:27 +00:00
George Oikonomou
49620903a5
Merge pull request #791 from debug-ito/cooja-add-int-master
...
cooja: add int-master implementation.
2018-12-07 01:43:21 +00:00
Toshio Ito
e7a86cf16b
cooja: add int-master implementation.
...
It's copied from arch/cpu/native/int-master.c, which is just a no-op
stub.
See #790
2018-12-06 11:30:54 +09:00
Joakim Eriksson
ba15c0c6e4
Merge pull request #784 from g-oikonomou/bugfix/nrf52dk
...
Fix the nrf52dk .jlink and .flash make targets
2018-12-02 10:41:05 +01:00
George Oikonomou
944d8da255
Fix the nrf52dk .jlink and .flash make targets
...
Fixes #782
2018-12-01 20:52:47 +00:00
George Oikonomou
372cce8beb
Merge pull request #783 from tiepettersen/contrib/ti-erronous-log-newline
...
Fix correct LOG_INFO in platform.c
2018-11-30 11:32:19 +00:00
Edvard Pettersen
dff3e760b8
Fix correct LOG_INFO in platform.c
...
When logging info about channel and PANID a newline is added for each
logging statement. It should only add a newline for the first LOG_INFO.
2018-11-29 16:42:45 +01:00