nifi
|
bb0ffe0478
|
moved rime initialization into rime router so it is easier to switch IPv6 routing module
|
2009-11-18 13:51:55 +00:00 |
adamdunkels
|
d3131e1811
|
Print link-local IPv6 address when booting the node
|
2009-10-29 22:10:59 +00:00 |
adamdunkels
|
f03caa357e
|
Allow reprogramming invidual nodes with 'make file.upload MOTE=x' where x is the mote number just like with make login
|
2009-10-29 22:10:21 +00:00 |
fros4943
|
99a540fd0d
|
macro renamed to SPI_IS_ENABLED() to avoid confusions
|
2009-10-27 15:33:24 +00:00 |
fros4943
|
6b36cd9de9
|
added macro for checking whether SPI is ENABLED
|
2009-10-27 15:25:02 +00:00 |
adamdunkels
|
29e8dae88c
|
Added X-MAC support for IPv6/SICSlowpan nodes, added 802.15.4 default framing to X-MAC
|
2009-10-19 20:55:52 +00:00 |
adamdunkels
|
79d7c366a3
|
Rime polite announcements should be used when IPv6 is enabled, and not used otherwise
|
2009-10-18 07:15:33 +00:00 |
nifi
|
d4b619bcc5
|
Renamed SPI_WAITFOREOTxBUF to SPI_WAITFORTxREADY for clarity and generalized SPI transmission status checks to work with both AVR and MSP430
|
2009-09-07 11:31:26 +00:00 |
nifi
|
3a8ee769cb
|
Changed to monitor the UART transmitter buffer ready flag instead of the UART transmitter empty flag. This almost doubles the speed of transmitting data to CC2420. Patch by James Brown.
|
2009-08-31 12:06:34 +00:00 |
nvt-se
|
ebd91b9f9d
|
Removed deprecated dir cache macro.
|
2009-08-30 20:36:32 +00:00 |
adamdunkels
|
b71faae330
|
ext-sensor: new driver for external sensors (e.g. Phidgets) on the Sentilla JCreate, developed by Marcus Lunden
|
2009-08-25 16:24:49 +00:00 |
nvt-se
|
b0431cc688
|
removed obsolete offset type definitions.
|
2009-07-13 20:02:16 +00:00 |
nvt-se
|
1e0ca9ceac
|
Made the use of micro logs configurable to make file modifications
more efficient on storage types that support inline updates.
The sky platform uses logs, and the native platform uses no logs.
|
2009-06-29 13:30:16 +00:00 |
nifi
|
05d4bc4532
|
allow UIP_CONF_ROUTER to be set as compilation flag
|
2009-06-29 09:54:39 +00:00 |
joxe
|
1cc33ac451
|
configured routing to off for sky-IPv6
|
2009-06-26 12:01:23 +00:00 |
joxe
|
e16d4b0f06
|
fixed IPV6 flags for sky
|
2009-06-26 12:00:49 +00:00 |
nvt-se
|
b912a41ea3
|
use polite announcements when running Rime over UDP.
|
2009-06-24 16:44:26 +00:00 |
nifi
|
912aba7280
|
added init function in MAC driver for easier configuration
|
2009-06-22 11:14:11 +00:00 |
fros4943
|
d54176205c
|
decreased default elfloader memory usage for sky platform
|
2009-05-18 10:32:56 +00:00 |
adamdunkels
|
bc6c9410cc
|
Print out the gateway's IP address more prominently
|
2009-05-12 17:32:49 +00:00 |
nvt-se
|
74e9bc8789
|
Added flash reads and writes to energest.
|
2009-05-11 15:26:24 +00:00 |
adamdunkels
|
900480959b
|
Increased the default number of queue buffers: there usually is plenty of RAM left, so we should be able to afford it
|
2009-05-10 21:15:16 +00:00 |
joxe
|
6a7bc4c3a5
|
added mcu-chip temperature to accelerometer sensor - value 3
|
2009-05-08 16:03:50 +00:00 |
adamdunkels
|
e6215712ca
|
When a node is configured as an IP gateway, we switch off the power-saving MAC protocolto improve performance and to avoid problems with the serial communication that X-MACs use of rtimers can cause
|
2009-04-29 11:46:20 +00:00 |
adamdunkels
|
064f4488d4
|
Increase default CPU speed from 2.4576 MHz to 3.9 MHz. Communication works better, at a low power cost
|
2009-04-29 11:43:48 +00:00 |
adamdunkels
|
bbab7ba55c
|
When the tmote-bsl binary is found, program only one mote at once (parallel programming with tmote-bsl doesn't seem to work)
|
2009-04-29 11:42:56 +00:00 |
fros4943
|
bc6704079c
|
cc2420 checksums temporarily disabled, due to timing problems with the x-mac unicast optimization
|
2009-04-16 14:34:51 +00:00 |
adamdunkels
|
2e37fca49f
|
Check for tmote-bsl-linux binary under linux, and use it is available
|
2009-04-10 07:43:29 +00:00 |
adamdunkels
|
2545fd9069
|
Hack to make DS2411 ID useable as an Ethernet MAC address (remove multicast bit)
|
2009-04-10 00:40:08 +00:00 |
adamdunkels
|
3415ff26bd
|
Added CC2420 checksums to non-ipv6 packets. Set a conservative TCP MSS
|
2009-04-10 00:39:19 +00:00 |
nifi
|
b41b79e3a9
|
Disable timestamp when using 802.15.4 frames (CC2420_CONF_TIMESTAMPS adds timestamp to radio packets).
|
2009-04-06 17:18:20 +00:00 |
nifi
|
900d8d8e17
|
changed to use HC01 compression for uip6
|
2009-04-06 16:01:11 +00:00 |
nifi
|
8b41f3a6a8
|
set rime addr size to 8 for uip6, restored clock resolution
|
2009-04-06 14:59:49 +00:00 |
nifi
|
76b7bf43d0
|
added setup for uip6 with 802.15.4 frames and routing using Rime
|
2009-04-06 14:12:58 +00:00 |
nifi
|
a36e529df1
|
added configuration for panid
|
2009-04-06 13:31:00 +00:00 |
nvt-se
|
f53560f6a5
|
enabled multihop routing, increased uip buffer size.
|
2009-04-06 13:23:14 +00:00 |
nifi
|
c1d490b6a7
|
added workaround for memcpy/memset bug in mspgcc
|
2009-04-06 13:07:37 +00:00 |
adamdunkels
|
58331e6802
|
Made tick resultion more fine-grained to support a shorter LPP listen time
|
2009-04-03 11:46:48 +00:00 |
fros4943
|
b730fb329d
|
changed upload rules due to problems on linux platforms
|
2009-04-02 11:15:30 +00:00 |
nifi
|
c6b15c289e
|
* show radio channel at startup
* only initialize timesynch when timesynch is enabled
|
2009-03-31 13:25:50 +00:00 |
fros4943
|
ac22ad5081
|
changed the Makefile rules for uploading to sky-nodes.
the earlier approach caused problems sometimes, resulting in command succeeding without all nodes being reprogrammed
|
2009-03-26 13:29:44 +00:00 |
adamdunkels
|
0076bfe8a5
|
Changed the name of the 'serial' module to 'serial-line' to signify that the module is about lines of data from the serial port, not individual bytes, and to make sdcc happy
|
2009-03-17 15:56:32 +00:00 |
adamdunkels
|
65eb5fd4e8
|
Renamed the rimebuf module to packetbuf to signal that the module is used outside of a pure Rime context (e.g., the sicslowpan code uses it).
|
2009-03-12 21:58:20 +00:00 |
julienabeille
|
0395ff5f39
|
sicslowpan Typo
|
2009-03-09 08:19:07 +00:00 |
adamdunkels
|
e3043b1be2
|
Enable communication power accounting for xmac by default
|
2009-03-01 20:43:37 +00:00 |
adamdunkels
|
ac9ab9c582
|
#include lib/random.h
|
2009-03-01 20:42:10 +00:00 |
nvt-se
|
47d70f2ae3
|
Switched name to CFS_CONF_OFFSET_TYPE to emphasize that it is a configurable option.
|
2009-03-01 12:00:00 +00:00 |
nvt-se
|
b47221672a
|
switched cfs offset type to signed long to allow backward movements with cfs_seek.
|
2009-02-28 13:41:16 +00:00 |
nvt-se
|
9f8f773b43
|
use unsigned long as cfs offset type.
|
2009-02-27 14:53:15 +00:00 |
adamdunkels
|
d761dfebd1
|
Bugfix: reduced the size of the uIP buffer to account for MAC header space
|
2009-02-25 10:23:03 +00:00 |