e455ef3533
Added the battery indicator to the sensors API
2010-01-15 08:51:21 +00:00
fab672c7ba
Reverted the FIFOP->FIFO change; it didn't work :(
2010-01-14 23:32:05 +00:00
53edff7655
Added sensor API for the SHT11 driver
2010-01-14 20:16:33 +00:00
93c748cc74
Bug fix for mysterious packet loss : check FIFO pin instead of FIFOP pin for any unread RX FIFO data;
...
Added protection of packet timestamp across interrupts. Note that race condition can still occur as interrupts and self-scheduled reads of the RX FIFO interleave in certain unusual patterns. More investigation is needed.
2009-12-11 18:32:54 +00:00
6815e2a53f
Code style fix
2009-12-05 11:26:20 +00:00
9cc57c4324
generic radio return values
...
+ minor bug fix: SFD may go high without transmission starting (very seldom)
2009-11-13 10:07:53 +00:00
26bb5ecd21
added radio and MAC generic return values to allow applications finding out whether the packet was transmitted
2009-11-13 08:59:22 +00:00
5f71e9914e
configurable line buffer size + simplified interrupt handler + overflow check on line buffer
2009-11-02 12:47:06 +00:00
6f4a537aa0
serial line ringbuf implementation + increased default buffer size to 128 bytes
2009-10-27 16:20:31 +00:00
8745235a79
Minor codestyle fix
2009-09-09 21:07:42 +00:00
d4b619bcc5
Renamed SPI_WAITFOREOTxBUF to SPI_WAITFORTxREADY for clarity and generalized SPI transmission status checks to work with both AVR and MSP430
2009-09-07 11:31:26 +00:00
3a8ee769cb
Changed to monitor the UART transmitter buffer ready flag instead of the UART transmitter empty flag. This almost doubles the speed of transmitting data to CC2420. Patch by James Brown.
2009-08-31 12:06:34 +00:00
c81dbb6c89
Fixed problem with the radio driver changing transmission power to max when not specified at transmission. Also fixed bug where the lock was released when setting the transmission power.
...
Thanks to Djamel Djenouri and Marcus Lundén for identifying the problem.
2009-08-19 15:05:05 +00:00
18a98bb573
bug fix: we need to explicitly turn off the cc2420 listen mode after a packet transmission
2009-08-19 12:00:04 +00:00
0c8b200987
added autoack configuration for CC2420 and reversed long ieee address for address recognition
2009-07-28 22:24:53 +00:00
a71664e8d1
quick fix for driver to work with 4MHz
2009-06-23 13:12:37 +00:00
92862ad2a5
Increased the number of iterations for ugly-hack-loop that checks if a transmission has started, to accommodate a faster CPU speed on the MSP430
2009-04-29 11:38:50 +00:00
a3777852d4
* Corrected address for setting key 1
...
* Added missing include
2009-04-07 09:22:58 +00:00
0076bfe8a5
Changed the name of the 'serial' module to 'serial-line' to signify that the module is about lines of data from the serial port, not individual bytes, and to make sdcc happy
2009-03-17 15:56:32 +00:00
65eb5fd4e8
Renamed the rimebuf module to packetbuf to signal that the module is used outside of a pure Rime context (e.g., the sicslowpan code uses it).
2009-03-12 21:58:20 +00:00
f634ccfb3d
Set transmission power based on packet attribute
2009-03-11 20:38:53 +00:00
57b9cab27e
Set RSSI, correlation, and timestamp as packet attributes for incoming packets
2009-03-02 21:59:01 +00:00
dee785ae88
added configuration of checksum and timesynch
2009-02-25 21:21:06 +00:00
e34e97cd6f
Minor code style fixes
2009-02-24 21:30:20 +00:00
ae271a7f2f
replaced the TMOTE_SKY macros with CONTIKI_TARGET_SKY, in conformance to the latest target hint rules
2008-11-25 09:20:54 +00:00
ceb2554d2f
Enabled the SHT11 register readout to allow reading the low-voltage indicator bit
2008-11-10 21:10:36 +00:00
a42311dc7e
Only process incoming data if the process is polled. Compile checksum checks only for IPv4.
2008-11-06 08:18:29 +00:00
673d73bfa3
added energest on all parts of leds API and some cleanup
2008-09-29 11:35:28 +00:00
6a460fecdd
There is problem with the CC2420 driver: under high traffic load the packets often get mangled in the receive FIFO. Not sure why this happens or how to best prevent it. As a temporary workaround, I've added an additional CRC16 check to the incoming packets. This eats two bytes from each packet, but at least protects against the erroneous packets we've seen quite a few of lately. The reception code was also cleaned up, which resulted in a smaller code size.
2008-08-26 21:44:03 +00:00
f58b387bd3
Code style fixes
2008-07-08 08:23:47 +00:00
1f005b6299
Moved energest.{c,h} from core/lib to core/sys: power profiling is a system mechanism, not a library
2008-07-03 23:36:30 +00:00
51f4ab8b2c
Changed type from off_t (that potentially conflicts with existing types.h typedefs) to unsigned long
2008-07-03 23:12:10 +00:00
66876625d4
Changed name of the simple-cc2420 module to cc2420: changed all function names and variable names from simple_cc2420_* to cc2420_*.
2008-07-02 09:05:40 +00:00
6b187328bd
Added AES cipher constants
2008-07-02 09:03:49 +00:00
1cef019e78
Fixed typo.
2008-07-02 09:02:39 +00:00
1da58b8858
Functions for interfacing the built-in AES functions of the CC2420 chip
2008-07-02 08:46:13 +00:00
1586d8f36f
Changed filename of the CC2420 driver from simple-cc2420 to cc2420.
2008-07-01 21:02:51 +00:00
c802151453
Removed unused files
2008-07-01 20:13:24 +00:00
6709823d4a
Bugfix: energy estimation was not correct if a packet was sent when the radio was not in listen mode
2008-05-14 19:44:30 +00:00
39abed8672
Moved old CC2420 driver to the backyard
2008-02-24 22:29:08 +00:00
af48b648ee
Added a function that gets called when we see SLIP input. This function can be used to determine if a node is a SLIP gateway or not.
2008-02-24 21:00:53 +00:00
b001c14bf2
Code style fix
2008-02-03 20:43:35 +00:00
dc70ac2584
Added calibration to channel switch if currently in receive mode. Added explicit checks for transmission activity before channel switch
2008-01-24 13:09:16 +00:00
2c5964ef55
Changed default transmission behaviour to be to send without checking for channel activity first (in anticipation of radio API change that adds a CCA function to the radio API). General code cleanup. Added optional timetable profiling. Added simple_cc2420_get_channel() function, changed simple_cc2420_set_chan_pan to simple_cc2420_set_pan since we now have a dedicated simple_cc2420_set_channel
2008-01-23 14:57:19 +00:00
0c21c8893a
bugfix: wait while *either* transmitting or unvalid rssi
2008-01-17 15:38:45 +00:00
8a38ffea87
added declaration for simple_cc2420_get_txpower.
2008-01-15 08:53:52 +00:00
057cd5ac05
no ENERGEST_ON_* macro needed for levels.
2008-01-15 08:52:16 +00:00
c3653b96ce
check if ENERGEST_CONF_LEVELDEVICE_LEVELS is set.
...
call ENERGEST_ON_LEVEL.
2008-01-15 08:33:02 +00:00
21c690ecae
energy measurement support for TX power levels
2008-01-14 16:19:25 +00:00
02ee418313
Moving timesynch.[ch] from sys/ to core/net/rime as they have more to do with Rime than with the kernel
2008-01-14 14:22:16 +00:00
adamdunkels
zhitao
fros4943
nifi
joxe
nvt-se
thiemovoigt