nes-proj/core/lib/settings.c
Robert Quattlebaum ed2dd29eda core/lib/settings: Added SETTINGS_CONF_SKIP_CONVENIENCE_FUNCS.
Unfortunately, some platforms don't properly drop unreferenced functions,
so on these broken platforms we can save a significant amount
of space by skipping the definition of the convenience functions.
2013-03-20 11:57:13 -07:00

480 lines
13 KiB
C

/*
* Copyright (c) 2013, Robert Quattlebaum.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the Contiki operating system.
*
*/
#ifdef SETTINGS_CONF_SKIP_CONVENIENCE_FUNCS
#undef SETTINGS_CONF_SKIP_CONVENIENCE_FUNCS
#endif
#define SETTINGS_CONF_SKIP_CONVENIENCE_FUNCS 1
#include "contiki.h"
#include "settings.h"
#include "dev/eeprom.h"
#if CONTIKI_CONF_SETTINGS_MANAGER
#if !EEPROM_CONF_SIZE
#error CONTIKI_CONF_SETTINGS_MANAGER has been set, but EEPROM_CONF_SIZE hasnt!
#endif
#ifndef EEPROM_END_ADDR
#define EEPROM_END_ADDR (EEPROM_CONF_SIZE - 1)
#endif
#ifndef SETTINGS_MAX_SIZE
/** The maximum amount EEPROM dedicated to settings. */
#define SETTINGS_MAX_SIZE (127) /**< Defaults to 127 bytes */
#endif
#ifndef SETTINGS_TOP_ADDR
/** The top address in EEPROM that settings should use. Inclusive. */
#define SETTINGS_TOP_ADDR (settings_iter_t)(EEPROM_END_ADDR)
#endif
#ifndef SETTINGS_BOTTOM_ADDR
/** The lowest address in EEPROM that settings should use. Inclusive. */
#define SETTINGS_BOTTOM_ADDR (SETTINGS_TOP_ADDR + 1 - SETTINGS_MAX_SIZE)
#endif
#ifndef MIN
#define MIN(a,b) ((a)<(b)?a:b)
#endif
typedef struct {
#if SETTINGS_CONF_SUPPORT_LARGE_VALUES
uint8_t size_extra;
#endif
uint8_t size_low;
uint8_t size_check;
settings_key_t key;
} item_header_t;
/*****************************************************************************/
// MARK: - Public Travesal Functions
/*****************************************************************************/
/*---------------------------------------------------------------------------*/
settings_iter_t
settings_iter_begin()
{
return settings_iter_is_valid(SETTINGS_TOP_ADDR) ? SETTINGS_TOP_ADDR : 0;
}
/*---------------------------------------------------------------------------*/
settings_iter_t
settings_iter_next(settings_iter_t ret)
{
if(ret) {
/* A settings iterator always points to the first byte
* after the actual key-value pair in memory. This means that
* the address of our value in EEPROM just happens
* to be the address of our next iterator.
*/
ret = settings_iter_get_value_addr(ret);
return settings_iter_is_valid(ret) ? ret : 0;
}
return SETTINGS_INVALID_ITER;
}
/*---------------------------------------------------------------------------*/
uint8_t
settings_iter_is_valid(settings_iter_t iter)
{
item_header_t header = { 0 };
if(iter == EEPROM_NULL) {
return 0;
}
if(iter < SETTINGS_BOTTOM_ADDR + sizeof(header)) {
return 0;
}
eeprom_read(iter - sizeof(header), (uint8_t *)&header, sizeof(header));
if((uint8_t) header.size_check != (uint8_t) ~ header.size_low) {
return 0;
}
if(iter < SETTINGS_BOTTOM_ADDR + sizeof(header) + settings_iter_get_value_length(iter)) {
return 0;
}
return 1;
}
/*---------------------------------------------------------------------------*/
settings_key_t
settings_iter_get_key(settings_iter_t iter)
{
item_header_t header;
eeprom_read(iter - sizeof(header), (uint8_t *)&header, sizeof(header));
if((uint8_t) header.size_check != (uint8_t)~header.size_low) {
return SETTINGS_INVALID_KEY;
}
return header.key;
}
/*---------------------------------------------------------------------------*/
settings_length_t
settings_iter_get_value_length(settings_iter_t iter)
{
item_header_t header;
settings_length_t ret = 0;
eeprom_read(iter - sizeof(header), (uint8_t *)&header, sizeof(header) );
if((uint8_t)header.size_check == (uint8_t)~header.size_low) {
ret = header.size_low;
#if SETTINGS_CONF_SUPPORT_LARGE_VALUES
if(ret & (1 << 7)) {
ret = ((ret & ~(1 << 7)) << 7) | header.size_extra;
}
#endif
}
return ret;
}
/*---------------------------------------------------------------------------*/
eeprom_addr_t
settings_iter_get_value_addr(settings_iter_t iter)
{
settings_length_t len = settings_iter_get_value_length(iter);
#if SETTINGS_CONF_SUPPORT_LARGE_VALUES
len += (len >= 128);
#endif
return iter - sizeof(item_header_t) - len;
}
/*---------------------------------------------------------------------------*/
settings_length_t
settings_iter_get_value_bytes(settings_iter_t iter, void *bytes,
settings_length_t max_length)
{
max_length = MIN(max_length, settings_iter_get_value_length(iter));
eeprom_read(settings_iter_get_value_addr(iter), bytes, max_length);
return max_length;
}
/*---------------------------------------------------------------------------*/
settings_status_t
settings_iter_delete(settings_iter_t iter)
{
settings_status_t ret = SETTINGS_STATUS_FAILURE;
settings_iter_t next = settings_iter_next(iter);
if(!next) {
/* Special case: we are the last item. we can get away with
* just wiping out our own header.
*/
item_header_t header;
memset(&header, 0xFF, sizeof(header));
eeprom_write(iter - sizeof(header), (uint8_t *)&header, sizeof(header));
ret = SETTINGS_STATUS_OK;
}
/* This case requires the settings store to be shifted.
* Currently unimplemented. TODO: Writeme!
*/
ret = SETTINGS_STATUS_UNIMPLEMENTED;
return ret;
}
/*****************************************************************************/
// MARK: - Public Functions
/*****************************************************************************/
/*---------------------------------------------------------------------------*/
uint8_t
settings_check(settings_key_t key, uint8_t index)
{
uint8_t ret = 0;
settings_iter_t iter;
for(iter = settings_iter_begin(); iter; iter = settings_iter_next(iter)) {
if(settings_iter_get_key(iter) == key) {
if(!index) {
ret = 1;
break;
} else {
index--;
}
}
}
return ret;
}
/*---------------------------------------------------------------------------*/
settings_status_t
settings_get(settings_key_t key, uint8_t index, uint8_t *value,
settings_length_t * value_size)
{
settings_status_t ret = SETTINGS_STATUS_NOT_FOUND;
settings_iter_t iter;
for(iter = settings_iter_begin(); iter; iter = settings_iter_next(iter)) {
if(settings_iter_get_key(iter) == key) {
if(!index) {
/* We found it! */
*value_size = settings_iter_get_value_bytes(iter,
(void *)value,
*value_size);
ret = SETTINGS_STATUS_OK;
break;
} else {
/* Nope, keep looking */
index--;
}
}
}
return ret;
}
/*---------------------------------------------------------------------------*/
settings_status_t
settings_add(settings_key_t key, const uint8_t *value,
settings_length_t value_size)
{
settings_status_t ret = SETTINGS_STATUS_FAILURE;
settings_iter_t iter;
item_header_t header;
/* Find the last item. */
for(iter = settings_iter_begin(); settings_iter_next(iter);
iter = settings_iter_next(iter)) {
/* This block intentionally left blank. */
}
if(iter) {
/* Value address of item is the same as the iterator for next item. */
iter = settings_iter_get_value_addr(iter);
} else {
/* This will be the first setting! */
iter = SETTINGS_TOP_ADDR;
}
if(iter < SETTINGS_BOTTOM_ADDR + value_size + sizeof(header)) {
/* This value is too big to store. */
ret = SETTINGS_STATUS_OUT_OF_SPACE;
goto bail;
}
header.key = key;
if(value_size < 0x80) {
/* If the value size is less than 128, then
* we can get away with only using one byte
* to store the size.
*/
header.size_low = value_size;
}
#if SETTINGS_CONF_SUPPORT_LARGE_VALUES
else if(value_size <= SETTINGS_MAX_VALUE_SIZE) {
/* If the value size is larger than or equal to 128,
* then we need to use two bytes. Store
* the most significant 7 bits in the first
* size byte (with MSB set) and store the
* least significant bits in the second
* byte (with LSB clear)
*/
header.size_low = (value_size >> 7) | 0x80;
header.size_extra = value_size & ~0x80;
}
#endif
else {
/* Value size way too big! */
ret = SETTINGS_STATUS_VALUE_TOO_BIG;
goto bail;
}
header.size_check = ~header.size_low;
/* Write the header first */
eeprom_write(iter - sizeof(header), (uint8_t *)&header, sizeof(header));
/* Sanity check, remove once confident */
if(settings_iter_get_value_length(iter) != value_size) {
goto bail;
}
/* Now write the data */
eeprom_write(settings_iter_get_value_addr(iter), (uint8_t *)value, value_size);
/* This should be the last item. If this is not the case,
* then we need to clear out the phantom setting.
*/
if((iter = settings_iter_next(iter))) {
memset(&header, 0xFF, sizeof(header));
eeprom_write(iter - sizeof(header),(uint8_t *)&header, sizeof(header));
}
ret = SETTINGS_STATUS_OK;
bail:
return ret;
}
/*---------------------------------------------------------------------------*/
settings_status_t
settings_set(settings_key_t key, const uint8_t *value,
settings_length_t value_size)
{
settings_status_t ret = SETTINGS_STATUS_FAILURE;
settings_iter_t iter;
for(iter = settings_iter_begin(); iter; iter = settings_iter_next(iter)) {
if(settings_iter_get_key(iter) == key) {
break;
}
}
if((iter == EEPROM_NULL) || !settings_iter_is_valid(iter)) {
ret = settings_add(key, value, value_size);
goto bail;
}
if(value_size != settings_iter_get_value_length(iter)) {
/* Requires the settings store to be shifted. Currently unimplemented. */
ret = SETTINGS_STATUS_UNIMPLEMENTED;
goto bail;
}
/* Now write the data */
eeprom_write(settings_iter_get_value_addr(iter),
(uint8_t *)value, value_size);
ret = SETTINGS_STATUS_OK;
bail:
return ret;
}
/*---------------------------------------------------------------------------*/
settings_status_t
settings_delete(settings_key_t key, uint8_t index)
{
settings_status_t ret = SETTINGS_STATUS_NOT_FOUND;
settings_iter_t iter;
for(iter = settings_iter_begin(); iter; iter = settings_iter_next(iter)) {
if(settings_iter_get_key(iter) == key) {
if(!index) {
/* We found it! */
ret = settings_iter_delete(iter);
break;
} else {
/* Nope, keep looking */
index--;
}
}
}
return ret;
}
/*---------------------------------------------------------------------------*/
void
settings_wipe(void)
{
/* Simply making the first item invalid will effectively
* clear the key-value store.
*/
const uint32_t x = 0xFFFFFF;
eeprom_write(SETTINGS_TOP_ADDR - sizeof(x), (uint8_t *)&x, sizeof(x));
}
/*****************************************************************************/
// MARK: - Other Functions
/*****************************************************************************/
#if DEBUG
#include <stdio.h>
/*---------------------------------------------------------------------------*/
void
settings_debug_dump(void)
{
settings_iter_t iter;
printf("{\n");
for(iter = settings_iter_begin(); iter; iter = settings_iter_next(iter)) {
settings_length_t len = settings_iter_get_value_length(iter);
eeprom_addr_t addr = settings_iter_get_value_addr(iter);
uint8_t byte;
union {
settings_key_t key;
char bytes[0];
} u;
u.key = settings_iter_get_key(iter);
printf("\t\"%c%c\" = <", u.bytes[0], u.bytes[1]);
for(; len; len--, addr++) {
eeprom_read(addr, &byte, 1);
printf("%02X", byte);
if(len != 1) {
printf(" ");
}
}
printf(">;\n");
}
printf("}\n");
}
#endif /* DEBUG */
#endif /* CONTIKI_CONF_SETTINGS_MANAGER */