giomba
/
nes-proj
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
nes-proj/arch/cpu/cc26x0-cc13x0/rf-core/ble-hal/rf-ble-cmd.c

530 lines
19 KiB
C
Raw Blame History

/*
* Copyright (c) 2017, Graz University of Technology
* Copyright (c) 2018, University of Bristol - http://www.bristol.ac.uk/
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/**
* \file
* BLE commands for the TI CC26xx BLE radio.
* These functions are specific to the TI CC26xx and cannot be
* reused by other BLE radios.
*
* \author
* Michael Spoerk <michael.spoerk@tugraz.at>
* Jinyan BAI <onefreebjy@outlook.com>
*/
/*---------------------------------------------------------------------------*/
#include "contiki.h"
#include "rf_ble_cmd.h"
#include "rf-core/rf-core.h"
#include "rf-core/ble-hal/rf-ble-cmd.h"
/*---------------------------------------------------------------------------*/
#include "sys/log.h"
#define LOG_MODULE "BLE-RADIO"
#define LOG_LEVEL LOG_LEVEL_MAIN
/*---------------------------------------------------------------------------*/
#define CMD_GET_STATUS(X) (((rfc_radioOp_t *)X)->status)
/*---------------------------------------------------------------------------*/
/* values for a selection of available TX powers (values from SmartRF Studio) */
/*static uint16_t tx_power = 0x9330; / * +5 dBm * / */
static uint16_t tx_power = 0x3161; /* 0 dBm */
/*static uint16_t tx_power = 0x0CCB; / * -15 dBm * / */
/*---------------------------------------------------------------------------*/
/* BLE overrides */
#if RADIO_CONF_BLE5
uint32_t ble_overrides_common[] =
{
/* Rx: Set LNA IB trim value based on the selected defaultPhy.mainMode setting. (NOTE: The value 0x8 is a placeholder. The value to use should be set during run-time by radio driver function.) */
ADI_HALFREG_OVERRIDE(0,4,0xF,0x8),
/* Rx: Set LNA IB offset used for automatic software compensation to 0 */
(uint32_t)0x00008883,
/* Synth: Use 24 MHz crystal, enable extra PLL filtering */
(uint32_t)0x02010403,
/* Synth: Set fine top and bottom code to 127 and 0 */
HW_REG_OVERRIDE(0x4020, 0x7F00),
/* Synth: Configure faster calibration */
HW32_ARRAY_OVERRIDE(0x4004, 1),
/* Synth: Configure faster calibration */
(uint32_t)0x1C0C0618,
/* Synth: Configure faster calibration */
(uint32_t)0xC00401A1,
/* Synth: Configure faster calibration */
(uint32_t)0x21010101,
/* Synth: Configure faster calibration */
(uint32_t)0xC0040141,
/* Synth: Configure faster calibration */
(uint32_t)0x00214AD3,
/* Synth: Decrease synth programming time-out by 90 us (0x0298 RAT ticks = 166 us) */
(uint32_t)0x02980243,
/* Bluetooth 5: Set correct total clock accuracy for received AuxPtr assuming local sleep clock of 50 ppm */
(uint32_t)0x0E490823,
/* override_frontend_id.xml */
(uint32_t)0xFFFFFFFF,
};
uint32_t ble_overrides_1Mbps[] =
{
/* Rx: Set LNA IB trim to normal trim value. (NOTE: The value 0x8 is a placeholder. The value to use should be set during run-time by radio driver function.) */
ADI_HALFREG_OVERRIDE(0,4,0xF,0x8),
/* Rx: Configure AGC to use gain table for improved performance */
HW_REG_OVERRIDE(0x6084, 0x05F8),
(uint32_t)0xFFFFFFFF,
};
uint32_t ble_overrides_2Mbps[] =
{
/* Rx: Set LNA IB trim to normal trim value. (NOTE: The value 0x8 is a placeholder. The value to use should be set during run-time by radio driver function.) */
ADI_HALFREG_OVERRIDE(0,4,0xF,0x8),
(uint32_t)0xFFFFFFFF,
};
uint32_t ble_overrides_coded[] =
{
/* Rx: Set LNA IB trim to 0xF (maximum) */
ADI_HALFREG_OVERRIDE(0,4,0xF,0xF),
/* Rx: Override AGC target gain to improve performance */
HW_REG_OVERRIDE(0x6088, 0x0018),
(uint32_t)0xFFFFFFFF,
};
#else
static uint32_t ble_overrides[] = {
0x00364038, /* Synth: Set RTRIM (POTAILRESTRIM) to 6 */
0x000784A3, /* Synth: Set FREF = 3.43 MHz (24 MHz / 7) */
0xA47E0583, /* Synth: Set loop bandwidth after lock to 80 kHz (K2) */
0xEAE00603, /* Synth: Set loop bandwidth after lock to 80 kHz (K3, LSB) */
0x00010623, /* Synth: Set loop bandwidth after lock to 80 kHz (K3, MSB) */
0x00456088, /* Adjust AGC reference level */
0x008F88B3, /* GPIO mode: https://e2e.ti.com/support/wireless_connectivity/proprietary_sub_1_ghz_simpliciti/f/156/t/488244?*/
0xFFFFFFFF, /* End of override list */
};
#endif
/*---------------------------------------------------------------------------*/
unsigned short
rf_ble_cmd_send(uint8_t *command)
{
uint32_t cmdsta;
rfc_radioOp_t *cmd = (rfc_radioOp_t *)command;
if(rf_core_send_cmd((uint32_t)cmd, &cmdsta) != RF_CORE_CMD_OK) {
LOG_ERR("rf_ble_cmd_send() could not send cmd. status: 0x%04X\n",
CMD_GET_STATUS(cmd));
return RF_BLE_CMD_ERROR;
}
return RF_BLE_CMD_OK;
}
/*---------------------------------------------------------------------------*/
unsigned short
rf_ble_cmd_wait(uint8_t *command)
{
rfc_radioOp_t *cmd = (rfc_radioOp_t *)command;
if(rf_core_wait_cmd_done((void *)cmd) != RF_CORE_CMD_OK) {
LOG_ERR("rf_ble_cmd_wait() could not wait. status: 0x%04X\n",
CMD_GET_STATUS(cmd));
return RF_BLE_CMD_ERROR;
}
return RF_BLE_CMD_OK;
}
/*---------------------------------------------------------------------------*/
unsigned short
rf_ble_cmd_setup_ble_mode(void)
{
#if RADIO_CONF_BLE5
rfc_CMD_BLE5_RADIO_SETUP_t cmd;
/* Create radio setup command */
rf_core_init_radio_op((rfc_radioOp_t *)&cmd, sizeof(cmd), CMD_BLE5_RADIO_SETUP);
cmd.startTrigger.bEnaCmd = 0;
cmd.defaultPhy.mainMode = 1;
cmd.defaultPhy.coding = 1;
cmd.pRegOverrideCommon = ble_overrides_common;
cmd.pRegOverride1Mbps = ble_overrides_1Mbps;
cmd.pRegOverride2Mbps = ble_overrides_2Mbps;
cmd.pRegOverrideCoded = ble_overrides_coded;
#else
rfc_CMD_RADIO_SETUP_t cmd;
/* Create radio setup command */
rf_core_init_radio_op((rfc_radioOp_t *)&cmd, sizeof(cmd), CMD_RADIO_SETUP);
cmd.mode = 0;
cmd.pRegOverride = ble_overrides;
#endif
cmd.txPower = tx_power;
/* Send Radio setup to RF Core */
if(rf_ble_cmd_send((uint8_t *)&cmd) != RF_BLE_CMD_OK) {
return RF_BLE_CMD_ERROR;
}
/* Wait until radio setup is done */
return rf_ble_cmd_wait((uint8_t *)&cmd);
}
/*---------------------------------------------------------------------------*/
/* ADVERTISING functions */
/*---------------------------------------------------------------------------*/
void
rf_ble_cmd_create_adv_cmd(uint8_t *command, uint8_t channel,
uint8_t *param, uint8_t *output)
{
#if RADIO_CONF_BLE5
rfc_CMD_BLE5_ADV_t *c = (rfc_CMD_BLE5_ADV_t *)command;
memset(c, 0x00, sizeof(rfc_CMD_BLE5_ADV_t));
c->commandNo = CMD_BLE5_ADV;
c->rangeDelay = 0;
c->txPower = tx_power;
#else
rfc_CMD_BLE_ADV_t *c = (rfc_CMD_BLE_ADV_t *)command;
memset(c, 0x00, sizeof(rfc_CMD_BLE_ADV_t));
c->commandNo = CMD_BLE_ADV;
#endif
c->condition.rule = COND_NEVER;
c->whitening.bOverride = 0;
c->channel = channel;
c->pParams = (rfc_bleAdvPar_t *)param;
c->startTrigger.triggerType = TRIG_NOW;
c->pOutput = (rfc_bleAdvOutput_t *)output;
}
/*---------------------------------------------------------------------------*/
void
rf_ble_cmd_create_adv_params(uint8_t *param, dataQueue_t *rx_queue,
uint8_t adv_data_len, uint8_t *adv_data,
uint8_t scan_resp_data_len, uint8_t *scan_resp_data,
ble_addr_type_t own_addr_type, uint8_t *own_addr)
{
rfc_bleAdvPar_t *p = (rfc_bleAdvPar_t *)param;
memset(p, 0x00, sizeof(rfc_bleAdvPar_t));
p->pRxQ = rx_queue;
p->rxConfig.bAutoFlushIgnored = 1;
p->rxConfig.bAutoFlushCrcErr = 0;
p->rxConfig.bAutoFlushEmpty = 1;
p->rxConfig.bIncludeLenByte = 1;
p->rxConfig.bIncludeCrc = 0;
p->rxConfig.bAppendRssi = 1;
p->rxConfig.bAppendStatus = 1;
p->rxConfig.bAppendTimestamp = 1;
p->advConfig.advFilterPolicy = 0;
p->advConfig.bStrictLenFilter = 0;
p->advConfig.deviceAddrType = own_addr_type;
p->pDeviceAddress = (uint16_t *)own_addr;
p->advLen = adv_data_len;
p->scanRspLen = scan_resp_data_len;
p->pAdvData = adv_data;
p->pScanRspData = scan_resp_data;
p->endTrigger.triggerType = TRIG_NEVER;
}
/*---------------------------------------------------------------------------*/
/* INITIATOR functions */
/*---------------------------------------------------------------------------*/
void
rf_ble_cmd_create_initiator_cmd(uint8_t *cmd, uint8_t channel, uint8_t *params,
uint8_t *output, uint32_t start_time)
{
#if RADIO_CONF_BLE5
rfc_CMD_BLE5_INITIATOR_t *c = (rfc_CMD_BLE5_INITIATOR_t *)cmd;
memset(c, 0x00, sizeof(rfc_CMD_BLE5_INITIATOR_t));
c->commandNo = CMD_BLE5_INITIATOR;
c->condition.rule = COND_NEVER;
c->whitening.bOverride = 0;
c->channel = channel;
c->pParams = (rfc_ble5InitiatorPar_t *)params;
c->startTrigger.triggerType = TRIG_ABSTIME;
c->startTime = start_time;
c->pOutput = (rfc_ble5ScanInitOutput_t *)output;
c->txPower = tx_power;
c->rangeDelay = 0;
#else
rfc_CMD_BLE_INITIATOR_t *c = (rfc_CMD_BLE_INITIATOR_t *)cmd;
memset(c, 0x00, sizeof(rfc_CMD_BLE_INITIATOR_t));
c->commandNo = CMD_BLE_INITIATOR;
c->condition.rule = COND_NEVER;
c->whitening.bOverride = 0;
c->channel = channel;
c->pParams = (rfc_bleInitiatorPar_t *)params;
c->startTrigger.triggerType = TRIG_ABSTIME;
c->startTime = start_time;
c->pOutput = (rfc_bleInitiatorOutput_t *)output;
#endif
}
/*---------------------------------------------------------------------------*/
void
rf_ble_cmd_create_initiator_params(uint8_t *param, dataQueue_t *rx_queue,
uint32_t initiator_time,
ble_addr_type_t own_addr_type, uint8_t *own_addr,
ble_addr_type_t peer_addr_type, uint8_t *peer_addr,
uint32_t connect_time, uint8_t *conn_req_data)
{
#if RADIO_CONF_BLE5
rfc_ble5InitiatorPar_t *p = (rfc_ble5InitiatorPar_t *)param;
p->backoffPar.bLastSucceeded = 0;
p->backoffPar.bLastFailed = 0;
p->maxWaitTimeForAuxCh = 0;
p->rxStartTime = 0;
p->rxListenTime = 0;
#else
rfc_bleInitiatorPar_t *p = (rfc_bleInitiatorPar_t *)param;
#endif
p->pRxQ = rx_queue;
p->rxConfig.bAutoFlushIgnored = 1;
p->rxConfig.bAutoFlushCrcErr = 0;
p->rxConfig.bAutoFlushEmpty = 1;
p->rxConfig.bIncludeLenByte = 1;
p->rxConfig.bIncludeCrc = 0;
p->rxConfig.bAppendRssi = 1;
p->rxConfig.bAppendStatus = 1;
p->rxConfig.bAppendTimestamp = 1;
/* p->initConfig.bUseWhiteList = 0; */
p->initConfig.bUseWhiteList = 1;
p->initConfig.bDynamicWinOffset = 0;
p->initConfig.deviceAddrType = own_addr_type;
p->initConfig.peerAddrType = peer_addr_type;
p->initConfig.bStrictLenFilter = 1;
p->connectReqLen = 22;
p->pConnectReqData = conn_req_data;
p->pDeviceAddress = (uint16_t *)own_addr;
p->pWhiteList = (rfc_bleWhiteListEntry_t *)peer_addr;
p->connectTime = connect_time;
p->timeoutTrigger.triggerType = TRIG_REL_START;
p->timeoutTime = initiator_time;
p->endTrigger.triggerType = TRIG_NEVER;
}
/*---------------------------------------------------------------------------*/
/* CONNECTION slave functions */
/*---------------------------------------------------------------------------*/
void
rf_ble_cmd_create_slave_cmd(uint8_t *cmd, uint8_t channel, uint8_t *params,
uint8_t *output, uint32_t start_time)
{
#if RADIO_CONF_BLE5
rfc_CMD_BLE5_SLAVE_t *c = (rfc_CMD_BLE5_SLAVE_t *)cmd;
memset(c, 0x00, sizeof(rfc_CMD_BLE5_SLAVE_t));
c->commandNo = CMD_BLE5_SLAVE;
c->condition.rule = COND_NEVER;
c->whitening.bOverride = 0;
c->channel = channel;
c->pParams = (rfc_ble5SlavePar_t *)params;
c->startTrigger.triggerType = TRIG_ABSTIME;
c->startTime = start_time;
c->pOutput = (rfc_bleMasterSlaveOutput_t *)output;
c->phyMode.mainMode = 1;
c->phyMode.coding = 1;
c->txPower = tx_power;
c->rangeDelay = 0;
#else
rfc_CMD_BLE_SLAVE_t *c = (rfc_CMD_BLE_SLAVE_t *)cmd;
memset(c, 0x00, sizeof(rfc_CMD_BLE_SLAVE_t));
c->commandNo = CMD_BLE_SLAVE;
c->condition.rule = COND_NEVER;
c->whitening.bOverride = 0;
c->channel = channel;
c->pParams = (rfc_bleSlavePar_t *)params;
c->startTrigger.triggerType = TRIG_ABSTIME;
c->startTrigger.pastTrig = 0;
c->startTime = start_time;
c->pOutput = (rfc_bleMasterSlaveOutput_t *)output;
#endif
}
/*---------------------------------------------------------------------------*/
void
rf_ble_cmd_create_slave_params(uint8_t *params, dataQueue_t *rx_queue,
dataQueue_t *tx_queue, uint32_t access_address,
uint8_t crc_init_0, uint8_t crc_init_1,
uint8_t crc_init_2, uint32_t win_size,
uint32_t window_widening, uint8_t first_packet)
{
#if RADIO_CONF_BLE5
rfc_ble5SlavePar_t *p = (rfc_ble5SlavePar_t *)params;
p->maxRxPktLen = 255;
p->maxLenLowRate = 0;
#else
rfc_bleSlavePar_t *p = (rfc_bleSlavePar_t *)params;
#endif
p->pRxQ = rx_queue;
p->pTxQ = tx_queue;
p->rxConfig.bAutoFlushIgnored = 1;
p->rxConfig.bAutoFlushCrcErr = 1;
p->rxConfig.bAutoFlushEmpty = 1;
p->rxConfig.bIncludeLenByte = 1;
p->rxConfig.bIncludeCrc = 0;
p->rxConfig.bAppendRssi = 1;
p->rxConfig.bAppendStatus = 1;
p->rxConfig.bAppendTimestamp = 1;
if(first_packet) {
/* set parameters for first packet according to TI Technical Reference Manual */
p->seqStat.lastRxSn = 1;
p->seqStat.lastTxSn = 1;
p->seqStat.nextTxSn = 0;
p->seqStat.bFirstPkt = 1;
p->seqStat.bAutoEmpty = 0;
p->seqStat.bLlCtrlTx = 0;
p->seqStat.bLlCtrlAckRx = 0;
p->seqStat.bLlCtrlAckPending = 0;
}
p->maxNack = 0;
p->maxPkt = 0;
p->accessAddress = access_address;
p->crcInit0 = crc_init_0;
p->crcInit1 = crc_init_1;
p->crcInit2 = crc_init_2;
p->timeoutTrigger.triggerType = TRIG_REL_START;
if(first_packet) {
p->timeoutTime = (uint32_t)(10 * win_size);
} else {
p->timeoutTime = (uint32_t)(win_size + 2 * window_widening);
}
p->endTrigger.triggerType = TRIG_NEVER;
}
/*---------------------------------------------------------------------------*/
/* CONNECTION master functions */
/*---------------------------------------------------------------------------*/
void
rf_ble_cmd_create_master_cmd(uint8_t *cmd, uint8_t channel, uint8_t *params,
uint8_t *output, uint32_t start_time)
{
#if RADIO_CONF_BLE5
rfc_CMD_BLE5_MASTER_t *c = (rfc_CMD_BLE5_MASTER_t *)cmd;
memset(c, 0x00, sizeof(rfc_CMD_BLE5_MASTER_t));
c->commandNo = CMD_BLE5_MASTER;
c->condition.rule = COND_NEVER;
c->whitening.bOverride = 0;
c->channel = channel;
c->pParams = (rfc_ble5MasterPar_t *)params;
c->startTrigger.triggerType = TRIG_ABSTIME;
c->startTime = start_time;
c->pOutput = (rfc_bleMasterSlaveOutput_t *)output;
c->phyMode.mainMode = 1;
c->phyMode.coding = 1;
c->txPower = tx_power;
c->rangeDelay = 0;
#else
rfc_CMD_BLE_MASTER_t *c = (rfc_CMD_BLE_MASTER_t *)cmd;
memset(c, 0x00, sizeof(rfc_CMD_BLE_MASTER_t));
c->commandNo = CMD_BLE_MASTER;
c->condition.rule = COND_NEVER;
c->whitening.bOverride = 0;
c->channel = channel;
c->pParams = (rfc_bleMasterPar_t *)params;
c->startTrigger.triggerType = TRIG_ABSTIME;
c->startTime = start_time;
c->pOutput = (rfc_bleMasterSlaveOutput_t *)output;
#endif
}
/*---------------------------------------------------------------------------*/
void
rf_ble_cmd_create_master_params(uint8_t *params, dataQueue_t *rx_queue,
dataQueue_t *tx_queue, uint32_t access_address,
uint8_t crc_init_0, uint8_t crc_init_1,
uint8_t crc_init_2, uint8_t first_packet)
{
#if RADIO_CONF_BLE5
rfc_ble5MasterPar_t *p = (rfc_ble5MasterPar_t *)params;
p->maxRxPktLen = 255;
p->maxLenLowRate = 0;
#else
rfc_bleMasterPar_t *p = (rfc_bleMasterPar_t *)params;
#endif
p->pRxQ = rx_queue;
p->pTxQ = tx_queue;
p->rxConfig.bAutoFlushIgnored = 1;
p->rxConfig.bAutoFlushCrcErr = 1;
p->rxConfig.bAutoFlushEmpty = 1;
p->rxConfig.bIncludeLenByte = 1;
p->rxConfig.bIncludeCrc = 0;
p->rxConfig.bAppendRssi = 1;
p->rxConfig.bAppendStatus = 1;
p->rxConfig.bAppendTimestamp = 1;
if(first_packet) {
/* set parameters for first packet according to TI Technical Reference Manual */
p->seqStat.lastRxSn = 1;
p->seqStat.lastTxSn = 1;
p->seqStat.nextTxSn = 0;
p->seqStat.bFirstPkt = 1;
p->seqStat.bAutoEmpty = 0;
p->seqStat.bLlCtrlTx = 0;
p->seqStat.bLlCtrlAckRx = 0;
p->seqStat.bLlCtrlAckPending = 0;
}
p->maxPkt = 12;
p->accessAddress = access_address;
p->crcInit0 = crc_init_0;
p->crcInit1 = crc_init_1;
p->crcInit2 = crc_init_2;
p->endTrigger.triggerType = TRIG_REL_START;
p->endTime = (uint32_t)15 * 4000; /* a connection event must end after 10 ms */
}
/*---------------------------------------------------------------------------*/
/* DATA queue functions */
/*---------------------------------------------------------------------------*/
unsigned short
rf_ble_cmd_add_data_queue_entry(dataQueue_t *q, uint8_t *e)
{
uint32_t cmdsta;
rfc_CMD_ADD_DATA_ENTRY_t cmd;
cmd.commandNo = CMD_ADD_DATA_ENTRY;
cmd.pQueue = q;
cmd.pEntry = e;
if(rf_core_send_cmd((uint32_t)&cmd, &cmdsta) != RF_CORE_CMD_OK) {
LOG_ERR("could not add entry to data queue. status: 0x%04X\n",
CMD_GET_STATUS(&cmd));
return RF_BLE_CMD_ERROR;
}
return RF_BLE_CMD_OK;
}
Reference in New Issue View Git Blame Copy Permalink