231 lines
10 KiB
C
231 lines
10 KiB
C
/*
|
|
* Copyright (c) 2018, Texas Instruments Incorporated - http://www.ti.com/
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the name of the copyright holder nor the names of its
|
|
* contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
|
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
/*---------------------------------------------------------------------------*/
|
|
/*
|
|
* Parameter summary
|
|
* Adv. Address: 010203040506
|
|
* Adv. Data: dummy
|
|
* BLE Channel: 17
|
|
* Extended Header: 09 09 010203040506 babe
|
|
* Frequency: 2440 MHz
|
|
* PDU Payload length:: 30
|
|
* TX Power: 5 dBm (requires define CCFG_FORCE_VDDR_HH = 0 in ccfg
|
|
* see CC13xx/CC26xx Technical Reference Manual)
|
|
* Whitening: true
|
|
*/
|
|
/*---------------------------------------------------------------------------*/
|
|
#include "sys/cc.h"
|
|
/*---------------------------------------------------------------------------*/
|
|
#include <ti/devices/DeviceFamily.h>
|
|
#include DeviceFamily_constructPath(driverlib/rf_mailbox.h)
|
|
#include DeviceFamily_constructPath(driverlib/rf_common_cmd.h)
|
|
#include DeviceFamily_constructPath(driverlib/rf_ble_cmd.h)
|
|
#include DeviceFamily_constructPath(rf_patches/rf_patch_cpe_bt5.h)
|
|
#include DeviceFamily_constructPath(rf_patches/rf_patch_rfe_bt5.h)
|
|
#include DeviceFamily_constructPath(rf_patches/rf_patch_mce_bt5.h)
|
|
|
|
#include <ti/drivers/rf/RF.h>
|
|
/*---------------------------------------------------------------------------*/
|
|
#include "ble-settings.h"
|
|
/*---------------------------------------------------------------------------*/
|
|
/* TI-RTOS RF Mode Object */
|
|
RF_Mode rf_ble_mode =
|
|
{
|
|
.rfMode = RF_MODE_AUTO,
|
|
.cpePatchFxn = &rf_patch_cpe_bt5,
|
|
.mcePatchFxn = &rf_patch_mce_bt5,
|
|
.rfePatchFxn = &rf_patch_rfe_bt5,
|
|
};
|
|
/*---------------------------------------------------------------------------*/
|
|
/*
|
|
* TX Power table
|
|
* The RF_TxPowerTable_DEFAULT_PA_ENTRY macro is defined in RF.h and requires the following arguments:
|
|
* RF_TxPowerTable_DEFAULT_PA_ENTRY(bias, gain, boost coefficient)
|
|
* See the Technical Reference Manual for further details about the "txPower" Command field.
|
|
* The PA settings require the CCFG_FORCE_VDDR_HH = 0 unless stated otherwise.
|
|
*/
|
|
RF_TxPowerTable_Entry rf_ble_tx_power_table[RF_BLE_TX_POWER_TABLE_SIZE+1] =
|
|
{
|
|
{ -21, RF_TxPowerTable_DEFAULT_PA_ENTRY( 7, 3, 0, 3) },
|
|
{ -18, RF_TxPowerTable_DEFAULT_PA_ENTRY( 9, 3, 0, 3) },
|
|
{ -15, RF_TxPowerTable_DEFAULT_PA_ENTRY( 8, 2, 0, 6) },
|
|
{ -12, RF_TxPowerTable_DEFAULT_PA_ENTRY(10, 2, 0, 8) },
|
|
{ -10, RF_TxPowerTable_DEFAULT_PA_ENTRY(12, 2, 0, 11) },
|
|
{ -9, RF_TxPowerTable_DEFAULT_PA_ENTRY(13, 2, 0, 5) },
|
|
{ -6, RF_TxPowerTable_DEFAULT_PA_ENTRY(13, 1, 0, 16) },
|
|
{ -5, RF_TxPowerTable_DEFAULT_PA_ENTRY(14, 1, 0, 17) },
|
|
{ -3, RF_TxPowerTable_DEFAULT_PA_ENTRY(17, 1, 0, 20) },
|
|
{ 0, RF_TxPowerTable_DEFAULT_PA_ENTRY(25, 1, 0, 26) },
|
|
{ 1, RF_TxPowerTable_DEFAULT_PA_ENTRY(28, 1, 0, 28) },
|
|
{ 2, RF_TxPowerTable_DEFAULT_PA_ENTRY(13, 0, 0, 34) },
|
|
{ 3, RF_TxPowerTable_DEFAULT_PA_ENTRY(17, 0, 0, 42) },
|
|
{ 4, RF_TxPowerTable_DEFAULT_PA_ENTRY(22, 0, 0, 54) },
|
|
{ 5, RF_TxPowerTable_DEFAULT_PA_ENTRY(30, 0, 0, 74) },
|
|
RF_TxPowerTable_TERMINATION_ENTRY
|
|
};
|
|
/*---------------------------------------------------------------------------*/
|
|
/* Overrides for CMD_BLE5_RADIO_SETUP */
|
|
uint32_t rf_ble_overrides_common[] CC_ALIGN(4) =
|
|
{
|
|
/* override_ble5_setup_override_common.xml */
|
|
(uint32_t)0x02400403, /* Synth: Use 48 MHz crystal, enable extra PLL filtering */
|
|
(uint32_t)0x001C8473, /* Synth: Configure extra PLL filtering */
|
|
(uint32_t)0x00088433, /* Synth: Configure synth hardware */
|
|
(uint32_t)0x00038793, /* Synth: Set minimum RTRIM to 3 */
|
|
HW32_ARRAY_OVERRIDE(0x4004,1), /* Synth: Configure faster calibration */
|
|
(uint32_t)0x1C0C0618, /* Synth: Configure faster calibration */
|
|
(uint32_t)0xC00401A1, /* Synth: Configure faster calibration */
|
|
(uint32_t)0x00010101, /* Synth: Configure faster calibration */
|
|
(uint32_t)0xC0040141, /* Synth: Configure faster calibration */
|
|
(uint32_t)0x00214AD3, /* Synth: Configure faster calibration */
|
|
(uint32_t)0x02980243, /* Synth: Decrease synth programming time-out (0x0298 RAT ticks = 166 us) */
|
|
/* DC/DC regulator: In Tx, use DCDCCTL5[3:0]=0xC (DITHER_EN=1 and IPEAK=4). */
|
|
(uint32_t)0xFCFC08C3, /* In Rx, use DCDCCTL5[3:0]=0xC (DITHER_EN=1 and IPEAK=4). */
|
|
(uint32_t)0x00038883, /* Rx: Set LNA bias current offset to adjust +3 (default: 0) */
|
|
(uint32_t)0x000288A3, /* Rx: Set RSSI offset to adjust reported RSSI by -2 dB (default: 0) */
|
|
(uint32_t)0x01080263, /* Bluetooth 5: Compensate for reduced pilot tone length */
|
|
(uint32_t)0x08E90AA3, /* Bluetooth 5: Compensate for reduced pilot tone length */
|
|
(uint32_t)0x00068BA3, /* Bluetooth 5: Compensate for reduced pilot tone length */
|
|
/* Bluetooth 5: Set correct total clock accuracy for received AuxPtr */
|
|
(uint32_t)0x0E490C83, /* assuming local sleep clock of 50 ppm */
|
|
(uint32_t)0xFFFFFFFF,
|
|
};
|
|
/*---------------------------------------------------------------------------*/
|
|
/* Overrides for CMD_BLE5_RADIO_SETUP */
|
|
uint32_t rf_ble_overrides_1mbps[] CC_ALIGN(4) =
|
|
{
|
|
/* override_ble5_setup_override_1mbps.xml */
|
|
MCE_RFE_OVERRIDE(1,0,0,1,0,0), /* PHY: Use MCE RAM patch (mode 0), RFE RAM patch (mode 0) */
|
|
HW_REG_OVERRIDE(0x5320,0x0240), /* Bluetooth 5: Reduce pilot tone length */
|
|
(uint32_t)0x013302A3, /* Bluetooth 5: Compensate for reduced pilot tone length */
|
|
(uint32_t)0xFFFFFFFF,
|
|
};
|
|
/*---------------------------------------------------------------------------*/
|
|
/* Overrides for CMD_BLE5_RADIO_SETUP */
|
|
uint32_t rf_ble_overrides_2mbps[] CC_ALIGN(4) =
|
|
{
|
|
/* override_ble5_setup_override_2mbps.xml */
|
|
MCE_RFE_OVERRIDE(1,0,2,1,0,2), /* PHY: Use MCE RAM patch (mode 2), RFE RAM patch (mode 2) */
|
|
HW_REG_OVERRIDE(0x5320,0x0240), /* Bluetooth 5: Reduce pilot tone length */
|
|
(uint32_t)0x00D102A3, /* Bluetooth 5: Compensate for reduced pilot tone length */
|
|
(uint32_t)0xFFFFFFFF,
|
|
};
|
|
/*---------------------------------------------------------------------------*/
|
|
/* Overrides for CMD_BLE5_RADIO_SETUP */
|
|
uint32_t rf_ble_overrides_coded[] CC_ALIGN(4) =
|
|
{
|
|
/* override_ble5_setup_override_coded.xml */
|
|
MCE_RFE_OVERRIDE(1,0,1,1,0,1), /* PHY: Use MCE RAM patch (mode 1), RFE RAM patch (mode 1) */
|
|
HW_REG_OVERRIDE(0x5320,0x0240), /* Bluetooth 5: Reduce pilot tone length */
|
|
(uint32_t)0x078902A3, /* Bluetooth 5: Compensate for reduced pilot tone length */
|
|
(uint32_t)0xFFFFFFFF,
|
|
};
|
|
/*---------------------------------------------------------------------------*/
|
|
/* CMD_BLE5_RADIO_SETUP: Bluetooth 5 Radio Setup Command for all PHYs */
|
|
rfc_CMD_BLE5_RADIO_SETUP_t rf_cmd_ble5_radio_setup =
|
|
{
|
|
.commandNo = CMD_BLE5_RADIO_SETUP,
|
|
.status = IDLE,
|
|
.pNextOp = 0,
|
|
.startTime = 0x00000000,
|
|
.startTrigger.triggerType = TRIG_NOW,
|
|
.startTrigger.bEnaCmd = 0x0,
|
|
.startTrigger.triggerNo = 0x0,
|
|
.startTrigger.pastTrig = 0x0,
|
|
.condition.rule = COND_NEVER,
|
|
.condition.nSkip = 0x0,
|
|
.defaultPhy.mainMode = 0x0,
|
|
.defaultPhy.coding = 0x0,
|
|
.loDivider = 0x00,
|
|
.config.frontEndMode = 0x0,
|
|
.config.biasMode = 0x0,
|
|
.config.analogCfgMode = 0x0,
|
|
.config.bNoFsPowerUp = 0x0,
|
|
.txPower = 0x941E,
|
|
.pRegOverrideCommon = rf_ble_overrides_common,
|
|
.pRegOverride1Mbps = rf_ble_overrides_1mbps,
|
|
.pRegOverride2Mbps = rf_ble_overrides_2mbps,
|
|
.pRegOverrideCoded = rf_ble_overrides_coded,
|
|
};
|
|
/*---------------------------------------------------------------------------*/
|
|
/* Structure for CMD_BLE5_ADV_AUX.pParams */
|
|
rfc_ble5AdvAuxPar_t rf_ble5_adv_aux_par =
|
|
{
|
|
.pRxQ = 0,
|
|
.rxConfig.bAutoFlushIgnored = 0x0,
|
|
.rxConfig.bAutoFlushCrcErr = 0x0,
|
|
.rxConfig.bAutoFlushEmpty = 0x0,
|
|
.rxConfig.bIncludeLenByte = 0x0,
|
|
.rxConfig.bIncludeCrc = 0x0,
|
|
.rxConfig.bAppendRssi = 0x0,
|
|
.rxConfig.bAppendStatus = 0x0,
|
|
.rxConfig.bAppendTimestamp = 0x0,
|
|
.advConfig.advFilterPolicy = 0x0,
|
|
.advConfig.deviceAddrType = 0x0,
|
|
.advConfig.targetAddrType = 0x0,
|
|
.advConfig.bStrictLenFilter = 0x0,
|
|
.advConfig.bDirected = 0x0,
|
|
.advConfig.privIgnMode = 0x0,
|
|
.advConfig.rpaMode = 0x0,
|
|
.__dummy0 = 0x00,
|
|
.auxPtrTargetType = 0x00,
|
|
.auxPtrTargetTime = 0x00000000,
|
|
.pAdvPkt = 0,
|
|
.pRspPkt = 0,
|
|
.pDeviceAddress = 0,
|
|
.pWhiteList = 0,
|
|
};
|
|
/*---------------------------------------------------------------------------*/
|
|
/* CMD_BLE5_ADV_AUX: Bluetooth 5 Secondary Channel Advertiser Command */
|
|
rfc_CMD_BLE5_ADV_AUX_t rf_cmd_ble5_adv_aux =
|
|
{
|
|
.commandNo = CMD_BLE5_ADV_AUX,
|
|
.status = IDLE,
|
|
.pNextOp = 0,
|
|
.startTime = 0x00000000,
|
|
.startTrigger.triggerType = TRIG_NOW,
|
|
.startTrigger.bEnaCmd = 0x0,
|
|
.startTrigger.triggerNo = 0x0,
|
|
.startTrigger.pastTrig = 0x0,
|
|
.condition.rule = COND_NEVER,
|
|
.condition.nSkip = 0x0,
|
|
.channel = 0x8C,
|
|
.whitening.init = 0x51,
|
|
.whitening.bOverride = 0x1,
|
|
.phyMode.mainMode = 0x0,
|
|
.phyMode.coding = 0x0,
|
|
.rangeDelay = 0x00,
|
|
.txPower = 0x0000,
|
|
.pParams = &rf_ble5_adv_aux_par,
|
|
.pOutput = 0,
|
|
.tx20Power = 0x00000000,
|
|
};
|
|
/*---------------------------------------------------------------------------*/
|