485 lines
14 KiB
C
485 lines
14 KiB
C
/*
|
|
* Copyright (c) 2018, Texas Instruments Incorporated - http://www.ti.com/
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the name of the copyright holder nor the names of its
|
|
* contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
|
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
/**
|
|
* \addtogroup cc13xx-cc26xx-cpu
|
|
* @{
|
|
*
|
|
* \file
|
|
* Header with configuration defines common to the CC13xx/CC26xx
|
|
* platform.
|
|
* \author
|
|
* Edvard Pettersen <e.pettersen@ti.com>
|
|
*/
|
|
/*---------------------------------------------------------------------------*/
|
|
#ifndef CC13XX_CC26XX_CONF_H_
|
|
#define CC13XX_CC26XX_CONF_H_
|
|
/*---------------------------------------------------------------------------*/
|
|
#include "cc13xx-cc26xx-def.h"
|
|
|
|
#include "rf/rf.h"
|
|
/*---------------------------------------------------------------------------*/
|
|
/**
|
|
* \name Board Configuration.
|
|
*
|
|
* @{
|
|
*/
|
|
|
|
/* Configure that a board has sensors for the dev/sensors.h API. */
|
|
#ifndef BOARD_CONF_HAS_SENSORS
|
|
#define BOARD_CONF_HAS_SENSORS 0
|
|
#endif
|
|
|
|
/* Enable/disable the dev/sensors.h API for the given board. */
|
|
#ifndef BOARD_CONF_SENSORS_DISABLE
|
|
#define BOARD_CONF_SENSORS_DISABLE 0
|
|
#endif
|
|
/*---------------------------------------------------------------------------*/
|
|
/**
|
|
* \name GPIO HAL configuration.
|
|
*
|
|
* @{
|
|
*/
|
|
#define GPIO_HAL_CONF_ARCH_SW_TOGGLE 0
|
|
#define GPIO_HAL_CONF_ARCH_HDR_PATH "dev/gpio-hal-arch.h"
|
|
/** @} */
|
|
/*---------------------------------------------------------------------------*/
|
|
/**
|
|
* \name Watchdog Configuration.
|
|
*
|
|
* @{
|
|
*/
|
|
#ifndef WATCHDOG_CONF_DISABLE
|
|
#define WATCHDOG_CONF_DISABLE 0
|
|
#endif
|
|
|
|
#ifndef WATCHDOG_CONF_TIMER_TOP
|
|
#define WATCHDOG_CONF_TIMER_TOP 0xFFFFF
|
|
#endif
|
|
/** @} */
|
|
/*---------------------------------------------------------------------------*/
|
|
/**
|
|
* \name RF configuration.
|
|
*
|
|
* @{
|
|
*/
|
|
|
|
/*
|
|
* Set the inactivity timeout period for the RF driver. This determines how
|
|
* long the RF driver will wait when inactive until turning off the RF Core.
|
|
* Specified in microseconds.
|
|
*/
|
|
#ifndef RF_CONF_INACTIVITY_TIMEOUT
|
|
#define RF_CONF_INACTIVITY_TIMEOUT 2000 /**< 2 ms */
|
|
#endif
|
|
|
|
/*
|
|
* Configure TX power to either default PA or High PA, defaults to
|
|
* default PA.
|
|
*/
|
|
#ifndef RF_CONF_TXPOWER_HIGH_PA
|
|
#define RF_CONF_TXPOWER_HIGH_PA 0
|
|
#endif
|
|
|
|
#if (RF_CONF_TXPOWER_HIGH_PA) && !(SUPPORTS_HIGH_PA)
|
|
#error "Device does not support High PA"
|
|
#endif
|
|
|
|
/*
|
|
* CC13xx only: Configure TX power to use boot mode, allowing to gain
|
|
* up to 14 dBm with the default PA. This will, however, increase power
|
|
* consumption.
|
|
*/
|
|
#ifndef RF_CONF_TXPOWER_BOOST_MODE
|
|
#define RF_CONF_TXPOWER_BOOST_MODE 0
|
|
#endif
|
|
|
|
/*
|
|
* Configure RF mode. That is, whether to run on Sub-1 GHz (Prop-mode) or
|
|
* 2.4 GHz (IEEE-mode).
|
|
*/
|
|
#ifdef RF_CONF_MODE
|
|
/* Sanity check a valid configuration is provided. */
|
|
#if !(RF_CONF_MODE & RF_MODE_BM)
|
|
#error "Invalid RF_CONF_MODE provided"
|
|
#endif
|
|
|
|
#define RF_MODE RF_CONF_MODE
|
|
#endif /* RF_CONF_MODE */
|
|
|
|
#ifdef RF_CONF_FRONT_END_MODE
|
|
#define RF_FRONT_END_MODE RF_CONF_FRONT_END_MODE
|
|
#else
|
|
#define RF_FRONT_END_MODE RF_FRONT_END_MODE_DIFFERENTIAL
|
|
#endif
|
|
|
|
#ifdef RF_CONF_BIAS_MODE
|
|
#define RF_BIAS_MODE RF_CONF_BIAS_MODE
|
|
#else
|
|
#define RF_BIAS_MODE RF_BIAS_MODE_INTERNAL
|
|
#endif
|
|
|
|
/* Number of RX buffers. */
|
|
#ifndef RF_CONF_RX_BUF_CNT
|
|
#define RF_CONF_RX_BUF_CNT 4
|
|
#endif
|
|
|
|
/* Size of each RX buffer in bytes. */
|
|
#ifndef RF_CONF_RX_BUF_SIZE
|
|
#define RF_CONF_RX_BUF_SIZE 144
|
|
#endif
|
|
|
|
/* Enable/disable BLE beacon. */
|
|
#ifndef RF_CONF_BLE_BEACON_ENABLE
|
|
#define RF_CONF_BLE_BEACON_ENABLE 0
|
|
#endif
|
|
|
|
#if (RF_CONF_BLE_BEACON_ENABLE) && !(SUPPORTS_BLE_BEACON)
|
|
#error "Device does not support BLE for BLE beacon"
|
|
#endif
|
|
|
|
/*----- CC13xx Device Line --------------------------------------------------*/
|
|
/* CC13xx supports both IEEE and Prop mode, depending on which device. */
|
|
#if defined(DEVICE_LINE_CC13XX)
|
|
|
|
/* Default to Prop-mode for CC13xx devices if not configured. */
|
|
#ifndef RF_MODE
|
|
#define RF_MODE RF_MODE_SUB_1_GHZ
|
|
#endif
|
|
|
|
/*----- CC13xx Prop-mode ----------------------------------------------------*/
|
|
#if (RF_MODE == RF_MODE_SUB_1_GHZ) && (SUPPORTS_PROP_MODE)
|
|
|
|
/* Netstack configuration. */
|
|
#define NETSTACK_CONF_RADIO prop_mode_driver
|
|
|
|
/* CSMA configuration. */
|
|
#define CSMA_CONF_ACK_WAIT_TIME (RTIMER_SECOND / 300)
|
|
#define CSMA_CONF_AFTER_ACK_DETECTED_WAIT_TIME (RTIMER_SECOND / 1000)
|
|
#define CSMA_CONF_SEND_SOFT_ACK 1
|
|
|
|
/*----- CC13xx IEEE-mode ----------------------------------------------------*/
|
|
#elif (RF_MODE == RF_MODE_2_4_GHZ) && (SUPPORTS_IEEE_MODE)
|
|
|
|
/* Netstack configuration. */
|
|
#define NETSTACK_CONF_RADIO ieee_mode_driver
|
|
|
|
/* CSMA configuration. */
|
|
#define CSMA_CONF_SEND_SOFT_ACK 0
|
|
|
|
#else
|
|
/*----- CC13xx Unsupported Mode ---------------------------------------------*/
|
|
#error "Invalid RF mode configuration of CC13xx device"
|
|
#endif /* CC13xx RF Mode configuration */
|
|
|
|
/*----- CC26xx Device Line --------------------------------------------------*/
|
|
/* CC26xx only supports IEEE mode */
|
|
#elif defined(DEVICE_LINE_CC26XX)
|
|
|
|
/* Default to IEEE-mode for CC26xx devices if not configured */
|
|
#ifndef RF_MODE
|
|
#define RF_MODE RF_MODE_2_4_GHZ
|
|
#endif
|
|
|
|
/*----- CC26xx IEEE-mode ----------------------------------------------------*/
|
|
#if (RF_MODE == RF_MODE_2_4_GHZ) && (SUPPORTS_IEEE_MODE)
|
|
|
|
/* Netstack configuration */
|
|
#define NETSTACK_CONF_RADIO ieee_mode_driver
|
|
|
|
/* CSMA configuration */
|
|
#define CSMA_CONF_SEND_SOFT_ACK 0
|
|
|
|
/* Frequncy band configuration */
|
|
#undef DOT_15_4G_FREQ_BAND_ID
|
|
#define DOT_15_4G_CONF_FREQ_BAND_ID DOT_15_4G_FREQ_BAND_2450
|
|
|
|
#else
|
|
/*----- CC26xx Unsupported Mode ---------------------------------------------*/
|
|
#error "IEEE-mode only supported by CC26xx devices"
|
|
#endif /* CC26xx RF Mode configuration */
|
|
|
|
/*----- Unsupported device line ---------------------------------------------*/
|
|
#else
|
|
#error "Unsupported Device Line defined"
|
|
#endif /* Unsupported device line */
|
|
|
|
/** @} */
|
|
/*---------------------------------------------------------------------------*/
|
|
/**
|
|
* \name IEEE address configuration. Used to generate our link-local and
|
|
* global IPv6 addresses.
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* \brief Location of the IEEE address.
|
|
* 0 => Read from InfoPage.
|
|
* 1 => Use a hardcoded address, configured by IEEE_ADDR_CONF_ADDRESS.
|
|
*/
|
|
#ifndef IEEE_ADDR_CONF_HARDCODED
|
|
#define IEEE_ADDR_CONF_HARDCODED 0
|
|
#endif
|
|
|
|
/**
|
|
* \brief The hardcoded IEEE address to be used when IEEE_ADDR_CONF_HARDCODED
|
|
* is defined as 1. Must be a byte array of size 8.
|
|
*/
|
|
#ifndef IEEE_ADDR_CONF_ADDRESS
|
|
#define IEEE_ADDR_CONF_ADDRESS { 0x00, 0x12, 0x4B, 0x00, 0x89, 0xAB, 0xCD, 0xEF }
|
|
#endif
|
|
/** @} */
|
|
/*---------------------------------------------------------------------------*/
|
|
/**
|
|
* \name IEEE-mode configuration.
|
|
*
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* \brief Configuration to enable/disable auto ACKs in IEEE-mode.
|
|
* 0 => ACK generated by software
|
|
* 1 => ACK generated by the radio.
|
|
*/
|
|
#ifndef IEEE_MODE_CONF_AUTOACK
|
|
#define IEEE_MODE_CONF_AUTOACK 1
|
|
#endif
|
|
|
|
/**
|
|
* \brief Configuration to enable/disable frame filtering in IEEE-mode.
|
|
* 0 => Disable promiscous mode.
|
|
* 1 => Enable promiscous mode.
|
|
*/
|
|
#ifndef IEEE_MODE_CONF_PROMISCOUS
|
|
#define IEEE_MODE_CONF_PROMISCOUS 0
|
|
#endif
|
|
|
|
/**
|
|
* \brief Configuration to set the RSSI threshold in dBm in IEEE-mode.
|
|
* Defaults to -90 dBm.
|
|
*/
|
|
#ifndef IEEE_MODE_CONF_CCA_RSSI_THRESHOLD
|
|
#define IEEE_MODE_CONF_CCA_RSSI_THRESHOLD 0xA6
|
|
#endif
|
|
/** @} */
|
|
/*---------------------------------------------------------------------------*/
|
|
/**
|
|
* \name Prop-mode configuration.
|
|
*
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* \brief Configuration to set whitener in Prop-mode.
|
|
* 0 => No whitener
|
|
* 1 => Whitener.
|
|
*/
|
|
#ifndef PROP_MODE_CONF_DW
|
|
#define PROP_MODE_CONF_DW 0
|
|
#endif
|
|
|
|
/**
|
|
* \brief Use 16-bit or 32-bit CRC in Prop-mode.
|
|
* 0 => 32-bit CRC.
|
|
* 1 => 16-bit CRC.
|
|
*/
|
|
#ifndef PROP_MODE_CONF_USE_CRC16
|
|
#define PROP_MODE_CONF_USE_CRC16 0
|
|
#endif
|
|
|
|
/**
|
|
* \brief Configuration to set the RSSI threshold in dBm in Prop-mode.
|
|
* Defaults to -90 dBm.
|
|
*/
|
|
#ifndef PROP_MODE_CONF_CCA_RSSI_THRESHOLD
|
|
#define PROP_MODE_CONF_CCA_RSSI_THRESHOLD 0xA6
|
|
#endif
|
|
/** @} */
|
|
/*---------------------------------------------------------------------------*/
|
|
/**
|
|
* \name TI Drivers Configuration.
|
|
*
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* \brief Enable or disable UART driver.
|
|
*/
|
|
#ifndef TI_UART_CONF_ENABLE
|
|
#define TI_UART_CONF_ENABLE 1
|
|
#endif
|
|
|
|
/**
|
|
* \brief Enable or disable UART0 peripheral.
|
|
*/
|
|
#ifndef TI_UART_CONF_UART0_ENABLE
|
|
#define TI_UART_CONF_UART0_ENABLE TI_UART_CONF_ENABLE
|
|
#endif
|
|
|
|
/**
|
|
* \brief Enable or disable UART1 peripheral.
|
|
*/
|
|
#ifndef TI_UART_CONF_UART1_ENABLE
|
|
#define TI_UART_CONF_UART1_ENABLE 0
|
|
#endif
|
|
|
|
/**
|
|
* \brief UART driver baud rate configuration.
|
|
*/
|
|
#ifndef TI_UART_CONF_BAUD_RATE
|
|
#define TI_UART_CONF_BAUD_RATE 115200
|
|
#endif
|
|
|
|
/**
|
|
* \brief Enable or disable SPI driver.
|
|
*/
|
|
#ifndef TI_SPI_CONF_ENABLE
|
|
#define TI_SPI_CONF_ENABLE 1
|
|
#endif
|
|
|
|
/**
|
|
* \brief Enable or disable SPI0 peripheral.
|
|
*/
|
|
#ifndef TI_SPI_CONF_SPI0_ENABLE
|
|
#define TI_SPI_CONF_SPI0_ENABLE TI_SPI_CONF_ENABLE
|
|
#endif
|
|
|
|
/**
|
|
* \brief Enable or disable SPI1 peripheral.
|
|
*/
|
|
#ifndef TI_SPI_CONF_SPI1_ENABLE
|
|
#define TI_SPI_CONF_SPI1_ENABLE 0
|
|
#endif
|
|
|
|
/**
|
|
* \brief Enable or disable I2C driver.
|
|
*/
|
|
#ifndef TI_I2C_CONF_ENABLE
|
|
#define TI_I2C_CONF_ENABLE 1
|
|
#endif
|
|
|
|
/**
|
|
* \brief Enable or disable I2C0 peripheral.
|
|
*/
|
|
#ifndef TI_I2C_CONF_I2C0_ENABLE
|
|
#define TI_I2C_CONF_I2C0_ENABLE TI_I2C_CONF_ENABLE
|
|
#endif
|
|
|
|
/**
|
|
* \brief Enable or disable Non-Volatile Storage (NVS) driver.
|
|
*/
|
|
#ifndef TI_NVS_CONF_ENABLE
|
|
#define TI_NVS_CONF_ENABLE 0
|
|
#endif
|
|
|
|
/**
|
|
* \brief Enable or disable internal flash storage.
|
|
*/
|
|
#ifndef TI_NVS_CONF_NVS_INTERNAL_ENABLE
|
|
#define TI_NVS_CONF_NVS_INTERNAL_ENABLE TI_NVS_CONF_ENABLE
|
|
#endif
|
|
|
|
/**
|
|
* \brief Enable or disable external flash storage.
|
|
*/
|
|
#ifndef TI_NVS_CONF_NVS_EXTERNAL_ENABLE
|
|
#define TI_NVS_CONF_NVS_EXTERNAL_ENABLE TI_NVS_CONF_ENABLE
|
|
#endif
|
|
|
|
/**
|
|
* \brief Enable or disable SD driver.
|
|
*/
|
|
#ifndef TI_SD_CONF_ENABLE
|
|
#define TI_SD_CONF_ENABLE 0
|
|
#endif
|
|
/** @} */
|
|
/*---------------------------------------------------------------------------*/
|
|
/**
|
|
* \name SPI HAL configuration.
|
|
*
|
|
* CC13x0/CC26x0 has one SPI interface, while CC13x2/CC26x2 has two
|
|
* SPI interfaces. Some additional checks has to be made for the
|
|
* SPI_CONF_CONTROLLER_COUNT configuration, as this relies on whether the
|
|
* available SPI interfaces are enabled or not, as well as if the SPI driver
|
|
* is enabled at all.
|
|
*
|
|
* @{
|
|
*/
|
|
#if TI_SPI_CONF_ENABLE
|
|
/*
|
|
* The SPI driver is enabled. Therefore, the number of SPI interfaces depends
|
|
* on which Device family parent the device falls under and if any of its
|
|
* corresponding SPI interfaces are enabled or not.
|
|
*/
|
|
|
|
#define SPI0_IS_ENABLED ((TI_SPI_CONF_SPI0_ENABLE) ? 1 : 0)
|
|
#define SPI1_IS_ENABLED ((TI_SPI_CONF_SPI1_ENABLE) ? 1 : 0)
|
|
|
|
#if (DeviceFamily_PARENT == DeviceFamily_PARENT_CC13X0_CC26X0)
|
|
|
|
/* CC13x0/CC26x0 only has one SPI interface: SPI0. */
|
|
#define SPI_CONF_CONTROLLER_COUNT (SPI0_IS_ENABLED)
|
|
|
|
#elif (DeviceFamily_PARENT == DeviceFamily_PARENT_CC13X2_CC26X2)
|
|
|
|
/* CC13x0/CC26x0 only has two SPI interface: SPI0 and SPI1. */
|
|
#define SPI_CONF_CONTROLLER_COUNT (SPI0_IS_ENABLED + SPI1_IS_ENABLED)
|
|
|
|
#endif /* DeviceFamily_PARENT */
|
|
|
|
#else /* TI_SPI_CONF_ENABLE */
|
|
/*
|
|
* If the SPI driver is disabled then there are 0 available
|
|
* SPI interfaces. */
|
|
#define SPI_CONF_CONTROLLER_COUNT 0
|
|
#endif /* TI_SPI_CONF_ENABLE */
|
|
/** @} */
|
|
/*---------------------------------------------------------------------------*/
|
|
/**
|
|
* \name Slip configuration
|
|
*
|
|
* @{
|
|
*/
|
|
#ifndef SLIP_ARCH_CONF_ENABLED
|
|
/*
|
|
* Determine whether we need SLIP
|
|
* This will keep working while UIP_FALLBACK_INTERFACE and CMD_CONF_OUTPUT
|
|
* keep using SLIP
|
|
*/
|
|
#if defined(UIP_FALLBACK_INTERFACE) || defined(CMD_CONF_OUTPUT)
|
|
#define SLIP_ARCH_CONF_ENABLED 1
|
|
#endif
|
|
|
|
#endif /* SLIP_ARCH_CONF_ENABLED */
|
|
/** @} */
|
|
/*---------------------------------------------------------------------------*/
|
|
#endif /* CC13XX_CC26XX_CONF_H_ */
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @} */
|