nes-proj/examples/cc26xx/cc26xx-web-demo/cc26xx-web-demo.h
Jonas Olsson 67045d4012 Export RSSI to default parent in the CC26xx web demo
The current version of the CC26xx web demo publishes over MQTT the default parent's IPv6 address and the last observed RSSI of this link. This is collected by active probing (periodic ping).

This commit brings the probing functionality to the example's main code module. The MQTT client keeps publishing as previously, but we now also export the same information through CoAP resources. Configuration is still possible through the example's web server.
2015-08-23 20:41:12 +01:00

226 lines
8.9 KiB
C

/*
* Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/**
* \addtogroup cc26xx-examples
* @{
*
* \defgroup cc26xx-web-demo CC26xx Web Demo
* @{
*
* An example demonstrating:
* * how to use a CC26XX-powered node in a deployment driven by a 6LBR
* * how to expose on-device sensors as CoAP resources
* * how to build a small web page which reports networking and sensory data
* * how to configure functionality through the aforementioned web page using
* HTTP POST requests
* * a network-based UART
*
* \file
* Main header file for the CC26XX web demo.
*/
/*---------------------------------------------------------------------------*/
#ifndef CC26XX_WEB_DEMO_H_
#define CC26XX_WEB_DEMO_H_
/*---------------------------------------------------------------------------*/
#include "dev/leds.h"
#include "sys/process.h"
#include "mqtt-client.h"
#include "net-uart.h"
#include <stdint.h>
/*---------------------------------------------------------------------------*/
#ifdef CC26XX_WEB_DEMO_CONF_MQTT_CLIENT
#define CC26XX_WEB_DEMO_MQTT_CLIENT CC26XX_WEB_DEMO_CONF_MQTT_CLIENT
#else
#define CC26XX_WEB_DEMO_MQTT_CLIENT 1
#endif
#ifdef CC26XX_WEB_DEMO_CONF_6LBR_CLIENT
#define CC26XX_WEB_DEMO_6LBR_CLIENT CC26XX_WEB_DEMO_CONF_6LBR_CLIENT
#else
#define CC26XX_WEB_DEMO_6LBR_CLIENT 1
#endif
#ifdef CC26XX_WEB_DEMO_CONF_COAP_SERVER
#define CC26XX_WEB_DEMO_COAP_SERVER CC26XX_WEB_DEMO_CONF_COAP_SERVER
#else
#define CC26XX_WEB_DEMO_COAP_SERVER 1
#endif
#ifdef CC26XX_WEB_DEMO_CONF_NET_UART
#define CC26XX_WEB_DEMO_NET_UART CC26XX_WEB_DEMO_CONF_NET_UART
#else
#define CC26XX_WEB_DEMO_NET_UART 1
#endif
/*---------------------------------------------------------------------------*/
/* Active probing of RSSI from our preferred parent */
#if (CC26XX_WEB_DEMO_COAP_SERVER || CC26XX_WEB_DEMO_MQTT_CLIENT)
#define CC26XX_WEB_DEMO_READ_PARENT_RSSI 1
#else
#define CC26XX_WEB_DEMO_READ_PARENT_RSSI 0
#endif
#define CC26XX_WEB_DEMO_RSSI_MEASURE_INTERVAL_MAX 86400 /* secs: 1 day */
#define CC26XX_WEB_DEMO_RSSI_MEASURE_INTERVAL_MIN 5 /* secs */
/*---------------------------------------------------------------------------*/
/* User configuration */
/* Take a sensor reading on button press */
#define CC26XX_WEB_DEMO_SENSOR_READING_TRIGGER &button_left_sensor
/* Payload length of ICMPv6 echo requests used to measure RSSI with def rt */
#define CC26XX_WEB_DEMO_ECHO_REQ_PAYLOAD_LEN 20
#if BOARD_SENSORTAG
/* Force an MQTT publish on sensor event */
#define CC26XX_WEB_DEMO_MQTT_PUBLISH_TRIGGER &reed_relay_sensor
#else
#define CC26XX_WEB_DEMO_MQTT_PUBLISH_TRIGGER &button_down_sensor
#endif
#define CC26XX_WEB_DEMO_STATUS_LED LEDS_GREEN
/*---------------------------------------------------------------------------*/
/* A timeout used when waiting to connect to a network */
#define CC26XX_WEB_DEMO_NET_CONNECT_PERIODIC (CLOCK_SECOND >> 3)
/*---------------------------------------------------------------------------*/
/* Default configuration values */
#define CC26XX_WEB_DEMO_DEFAULT_ORG_ID "quickstart"
#if CPU_FAMILY_CC13XX
#define CC26XX_WEB_DEMO_DEFAULT_TYPE_ID "cc13xx"
#else
#define CC26XX_WEB_DEMO_DEFAULT_TYPE_ID "cc26xx"
#endif
#define CC26XX_WEB_DEMO_DEFAULT_EVENT_TYPE_ID "status"
#define CC26XX_WEB_DEMO_DEFAULT_SUBSCRIBE_CMD_TYPE "+"
#define CC26XX_WEB_DEMO_DEFAULT_BROKER_PORT 1883
#define CC26XX_WEB_DEMO_DEFAULT_PUBLISH_INTERVAL (30 * CLOCK_SECOND)
#define CC26XX_WEB_DEMO_DEFAULT_KEEP_ALIVE_TIMER 60
#define CC26XX_WEB_DEMO_DEFAULT_RSSI_MEAS_INTERVAL (CLOCK_SECOND * 30)
/*---------------------------------------------------------------------------*/
/*
* You normally won't have to change anything from here onwards unless you are
* extending the example
*/
/*---------------------------------------------------------------------------*/
/* Sensor types */
#define CC26XX_WEB_DEMO_SENSOR_BATMON_TEMP 0
#define CC26XX_WEB_DEMO_SENSOR_BATMON_VOLT 1
#define CC26XX_WEB_DEMO_SENSOR_BMP_PRES 2
#define CC26XX_WEB_DEMO_SENSOR_BMP_TEMP 3
#define CC26XX_WEB_DEMO_SENSOR_TMP_AMBIENT 4
#define CC26XX_WEB_DEMO_SENSOR_TMP_OBJECT 5
#define CC26XX_WEB_DEMO_SENSOR_HDC_TEMP 6
#define CC26XX_WEB_DEMO_SENSOR_HDC_HUMIDITY 7
#define CC26XX_WEB_DEMO_SENSOR_OPT_LIGHT 8
#define CC26XX_WEB_DEMO_SENSOR_MPU_ACC_X 9
#define CC26XX_WEB_DEMO_SENSOR_MPU_ACC_Y 10
#define CC26XX_WEB_DEMO_SENSOR_MPU_ACC_Z 11
#define CC26XX_WEB_DEMO_SENSOR_MPU_GYRO_X 12
#define CC26XX_WEB_DEMO_SENSOR_MPU_GYRO_Y 13
#define CC26XX_WEB_DEMO_SENSOR_MPU_GYRO_Z 14
/*---------------------------------------------------------------------------*/
extern process_event_t cc26xx_web_demo_publish_event;
extern process_event_t cc26xx_web_demo_config_loaded_event;
extern process_event_t cc26xx_web_demo_load_config_defaults;
/*---------------------------------------------------------------------------*/
#define CC26XX_WEB_DEMO_UNIT_TEMP "C"
#define CC26XX_WEB_DEMO_UNIT_VOLT "mV"
#define CC26XX_WEB_DEMO_UNIT_PRES "hPa"
#define CC26XX_WEB_DEMO_UNIT_HUMIDITY "%RH"
#define CC26XX_WEB_DEMO_UNIT_LIGHT "lux"
#define CC26XX_WEB_DEMO_UNIT_ACC "G"
#define CC26XX_WEB_DEMO_UNIT_GYRO "deg per sec"
/*---------------------------------------------------------------------------*/
/* A data type for sensor readings, internally stored in a linked list */
#define CC26XX_WEB_DEMO_CONVERTED_LEN 12
typedef struct cc26xx_web_demo_sensor_reading {
struct cc26xx_web_demo_sensor_reading *next;
int raw;
int last;
const char *descr;
const char *xml_element;
const char *form_field;
char *units;
uint8_t type;
uint8_t publish;
uint8_t changed;
char converted[CC26XX_WEB_DEMO_CONVERTED_LEN];
} cc26xx_web_demo_sensor_reading_t;
/*---------------------------------------------------------------------------*/
/* Global configuration */
typedef struct cc26xx_web_demo_config_s {
uint32_t magic;
int len;
uint32_t sensors_bitmap;
int def_rt_ping_interval;
mqtt_client_config_t mqtt_config;
net_uart_config_t net_uart;
} cc26xx_web_demo_config_t;
extern cc26xx_web_demo_config_t cc26xx_web_demo_config;
/*---------------------------------------------------------------------------*/
/**
* \brief Performs a lookup for a reading of a specific type of sensor
* \param sens_type CC26XX_WEB_DEMO_SENSOR_BATMON_TEMP...
* \return A pointer to the reading data structure or NULL
*/
const cc26xx_web_demo_sensor_reading_t *cc26xx_web_demo_sensor_lookup(int sens_type);
/**
* \brief Returns the first available sensor reading
* \return A pointer to the reading data structure or NULL
*/
const cc26xx_web_demo_sensor_reading_t *cc26xx_web_demo_sensor_first(void);
/**
* \brief Print an IPv6 address into a buffer
* \param buf A pointer to the buffer where this function will print the IPv6
* address
* \param buf_len the length of the buffer
* \param addr A pointer to the IPv6 address
* \return The number of bytes written to the buffer
*
* It is the caller's responsibility to allocate enough space for buf
*/
int cc26xx_web_demo_ipaddr_sprintf(char *buf, uint8_t buf_len,
const uip_ipaddr_t *addr);
/**
* \brief Resets the example to a default configuration
*/
void cc26xx_web_demo_restore_defaults(void);
/*---------------------------------------------------------------------------*/
#endif /* CC26XX_WEB_DEMO_H_ */
/*---------------------------------------------------------------------------*/
/**
* @}
* @}
*/