nes-proj/cpu/x86/drivers/quarkX1000/gpio.h
Ricardo de Almeida Gonzaga 4726bc3313 x86: Add Intel Quark X1000 GPIO Controller (non-legacy) interrupt support
Since Galileo pinmux is available, this patch adds interrupt support
for GPIO Controller (non-legacy).
2015-12-21 08:06:14 -02:00

75 lines
3.0 KiB
C

/*
* Copyright (C) 2015, Intel Corporation. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef CPU_X86_DRIVERS_QUARKX1000_GPIO_H_
#define CPU_X86_DRIVERS_QUARKX1000_GPIO_H_
#include <stdint.h>
#include "pci.h"
#define QUARKX1000_GPIO_IN (0 << 0)
#define QUARKX1000_GPIO_OUT (1 << 0)
#define QUARKX1000_GPIO_INT (1 << 1)
#define QUARKX1000_GPIO_ACTIVE_LOW (0 << 2)
#define QUARKX1000_GPIO_ACTIVE_HIGH (1 << 2)
#define QUARKX1000_GPIO_LEVEL (0 << 3)
#define QUARKX1000_GPIO_EDGE (1 << 3)
#define QUARKX1000_GPIO_DEBOUNCE (1 << 4)
#define QUARKX1000_GPIO_CLOCK_SYNC (1 << 5)
#define QUARKX1000_GPIO_POL_NORMAL (0 << 6)
#define QUARKX1000_GPIO_POL_INV (1 << 6)
#define QUARKX1000_GPIO_PUD_NORMAL (0 << 7)
#define QUARKX1000_GPIO_PUD_PULL_UP (1 << 7)
#define QUARKX1000_GPIO_PUD_PULL_DOWN (2 << 7)
#define QUARKX1000_GPIO_DIR_MASK (1 << 0)
#define QUARKX1000_GPIO_POL_MASK (1 << 6)
#define QUARKX1000_GPIO_PUD_MASK (3 << 7)
typedef void (*quarkX1000_gpio_callback)(uint32_t);
int quarkX1000_gpio_init(void);
int quarkX1000_gpio_config(uint8_t pin, int flags);
int quarkX1000_gpio_read(uint8_t pin, uint8_t *value);
int quarkX1000_gpio_write(uint8_t pin, uint8_t value);
int quarkX1000_gpio_config_port(int flags);
int quarkX1000_gpio_read_port(uint8_t *value);
int quarkX1000_gpio_write_port(uint8_t value);
int quarkX1000_gpio_set_callback(quarkX1000_gpio_callback callback);
void quarkX1000_gpio_clock_enable(void);
void quarkX1000_gpio_clock_disable(void);
#endif /* CPU_X86_DRIVERS_QUARKX1000_GPIO_H_ */